Used Waste Water Pump for sale (17,326)

Condition: used, This listing is for a QuattroFlow QF150 Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The Quattroflow 150S is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech,food or cosmetic research centres or plants Examples: • Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) • Solutions of polymers or suspensions (silicon, latex, chromatography media) • Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) • colloidal solutions • Suspensions of viruses or phage • Dairy products • Gelatine • Supplements and ingredients for cosmetic and food Flow rate max.: Eccentric shaft 3° l/h (lpm) 100 (1.67) 100 (1.67) Eccentric shaft 5° l/h (lpm) 180 (3) 180 (3) Flow rate min.: Eccentric shaft 3° l/h (lpm) 1 (0.017) 1 (0.017) Eccentric shaft 5° l/h (lpm) 1 (0.017) 1 (0.017) Pressure: Temperature of fluid < 40°C bar (psi) 6 (87) 6 (87) Temperature of fluid > 40°C bar (psi) 4 (58) 4 (58) Temperature max.: Fluid °C (°F) 80 (176) 80 (176) CIP °C (°F) 90 (194) 90 (194) SIP °C (°F) 130 (260) 130 (260) Autoclave °C (°F) 130 (260) 130 (260) Suction lift dry at: 3000 rpm 3000 rpm Eccentric shaft 3° m (ft) 1-1,5 (3.2-4.9) 1-1,5 (3.2-4.9) Eccentric shaft 5° m (ft) 2-3 (6.6-9.8) 2-3 (6.6-9.8) Volume specifications: Approximated volume per revolution at free output ml 0,72 (3°) 1,2 (5°) 0,72 (3°) 1,2 (5°) Filling volume without connectors ml 15 15 Residual volume (after idle with highspeed motor) ml 1-3 1-3 Product wetted surface (approx.) cm² (inch²) 112 (17) 112 (17) Speed range pump rpm 10-3000 10-3000 Connection specification inlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm (inch) 25 25 Internal diameter mm (inch) 4,7 4,7 Gjdsxx Avpopfx An Ioug Connection specification outlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm 25 25 Internal diameter mm (inch) 4,7 (0.19) 4,7 (0.19) Position of connectors Inline Inline Number of flow directions 4 4 Diameter drive shaft mm 7 7 Product wetted materials (standard): Pump housing SS316L SS316L Valve plate SS316L SS316L Diaphragms Santoprene Santoprene Valves EPDM EPDM O-rings EPDM EPDM Non-product wetted materials (standard): Pump housing SS316L SS316L Bearing housing SS316L SS316L Base plate SS316 SS316 Hood SS316 SS316 Dimensions pump with motor and housing: Length mm (inch) 257 (10,2) 277 (10-91) Width mm (inch) 164 (6,5) 200 (7,87) Height mm (inch) 185 (7,2) 195 (7,67) Weight pump with motor and housing kg (lb) 9,8 (22) 11,2 (25) IP protection class pump IP 54 54 Operating temperature range °C (°F) 0…40 (32…104) 10…30 (50…86)

Condition: new, Year of construction: 2016, functionality: fully functional, cooling capacity: 28 kW (38.07 HP), type of input current: three-phase, type of cooling: air, overall weight: 281 kg, input voltage: 400 V, total width: 540 mm, total length: 1,470 mm, total height: 1,610 mm, warranty duration: 12 months, heating capacity: 26 kW (35.35 HP), Aircooled chiller/Heat pump SYSTEMAIR SYSCROLL 30 28/26 kW Cooling capacity: 28 kW / 7.96 tons (12/7 — 35°C) Heating capacity: 26 kW / 7.39 tons (40/45 —7°C) Year of manufacture: 2016 Options: Hydralic module. Heat pump Hydraulic module: 1 pcs. water pump (EBARA) Heat exchanger: Plate Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Mitsubishi (scroll, inverter) Type of refrigerant: R410A Number of fans: 2 pcs. Dimensions: 1,47 x 0,54 x 1,61 m Weight: 281 kg Working hours: 3 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. Gsdpfsy Enrrjx An Ieug WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Tourell Gardner 1500L mixing vessel Gedpfx Anoz Ak Two Ioug Stainless, 1500L jacketed mixing vessel, hot water jacket, with top mounted agitator and scrape surface, central bottom discharge into a Waukesha lobe pump 4.0Kw, 3Ph

Condition: used, Year of construction: 2023, Milk E-Heating System PHE Gusdpfx Anjy E H Eqj Isg Electric Heated water Vat with connected Plate heat exchanger to Heat up products such as milk, juice and similar products. This can be used for various applications were the product needs to be pre heated ie. Separation, Homogeniser, Cheese process, Heating Vat, etc. This comes with a fully modernised control panel and frequency inverter for the product pump. Make: DMUK Capacity: 1000-1000 L/h Temperatures: Regulated by the controls Circulation Pump: Included Control Panel: Included VDF: Included Condition: Excellent

Condition: used, This listing is for 1 of 3 Watson Marlow 620S/R Peristaltic Pumps The units are in full working condition and ready for immediate use Design & Functionality The 620S/R model is part of the 600 Series of cased peristaltic pumps featuring a brushless DC motor equipped with digital keypad control (620S) and a sturdy NEMA 2 / IP31 vented, wipe‑down enclosure suited for dry industrial environments ,It operates at dual voltage (100–120 V or 200–240 V, 50/60 Hz) and includes features like MemoDose for one-shot dosing and wireless guard-switching for safety The casing is chemically resistant, with powder-coated die-cast aluminium construction and an easy-to-clean membrane keypad Pump Performance Flow range: 0.00026 to ~4.23 gpm (equivalent to ~0.001 to 16 L/min) with the 620R pump head With newer 620RE LoadSure heads, the flow increases up to ~4.76 gpm (0.004–18 L/min) Gusdpfjxhdx Dsx An Iog Pressure capability: Up to approximately 60 psi (4 bar) with the appropriate head and tubing Control accuracy: Exceptional 2,650:1 turndown ratio, fine speed control from 0.1 to 265 rpm in selectable increments (0.1, 0.5, 1, 2, 5, or 10 rpm), with 0.1% speed accuracy Pump Heads & Tubing The model supports the following interchangeable pump heads: 620R Mk II (continuous tubing, two rollers) 620RE and 620RE4 (LoadSure elements, two or four rollers) These heads are compatible with various tubing materials (e.g., Marprene™, Bioprene™, Sta‑Pure™, silicone) and sizes (typically 6.4 mm to 17 mm inner diameter) The 620RE and RE4 heads feature retractable rollers for easier cleaning (CIP/SIP) and rapid loading AFAB Lab Resources - Used Lab Equipment Physical Attributes & Construction Ingress Protection: IP31 (NEMA 2) for the standard 620S/R; there are IP66/NEMA 4X variants (e.g., 620SN/R) for environments requiring better dust and water resistance Weight: Around 19.6 kg (with 620R/RE head) to 20.1 kg (with 620RE4) Sound level: Less than 70 dB(A) at 1 m—relatively quiet for continuous industrial operation Advanced Features MemoDose: Delivers precise single-shot volumes—ideal for dosing applications Ramp function & non‑drip: Ramp improves handling of delicate fluids, preventing splashes/frothing, while non-drip minimizes residual drips at dose end (noted in related Di versions but often included in feature suites) Data export: Some models (e.g. 620S/RE) support RS‑232 export of batch records—important for GMP compliance

Year of construction: 2023, condition: like new (used), functionality: fully functional, We offer for sale a high-quality industrial centrifugal pump, the EDUR CBL 50-200/200, manufactured in 2023 by the renowned German company EDUR-Pumpenfabrik. The unit is designed for operation in demanding industrial conditions, ensuring high reliability, stable operating parameters, and low energy consumption. Model: CBL 50-200/200 Type: single-stage, horizontal centrifugal pump Capacity (Q): 51 m³/h Head (H): 50 m Maximum operating pressure: 10 bar Liquid temperature: up to 60°C Medium: clean and slightly contaminated liquids (without abrasive particles) The pump is characterized by a robust construction and is suitable for continuous operation in industrial installations. Motor technical data (Lammers, Germany): Power: 10.56 kW (50 Hz) / 12.1 kW (60 Hz) Rotational speed: approx. 2957 rpm (50 Hz) Efficiency class: IE3 (Premium Efficiency) Voltage: 400 V / 690 V (star/delta connection) Applications: – industrial and technological installations – cooling systems for machinery and equipment – water supply and water treatment systems – heating, ventilation, and air conditioning (HVAC) systems – pressure boosting systems The unit is characterized by low noise and vibration levels due to precise balancing and high-quality workmanship. Godpsy Amumjfx An Ijug

Condition: new, Year of construction: 2017, functionality: fully functional, cooling capacity: 16 kW (21.75 HP), type of input current: three-phase, type of cooling: air, overall weight: 227 kg, input voltage: 400 V, total width: 700 mm, total length: 1,100 mm, total height: 1,400 mm, warranty duration: 12 months, heating capacity: 18 kW (24.47 HP), Aircooled chiller/heat pump Blue Box Epsilon Echos 16 kW / 18 kW Cooling capacity: 16 kW (12/7 — 35°C) Heating capacity: 18 kW (40/45 — 7°C) Year of manufacture: 2017 Options: heat pump Heat exchanger: plate Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Siam ( scroll, inverter) Type of refrigerant: R410A Number of fans: 2 pcs. Dimensions: 1.10 x 0.70 x 1.40 m Weight: 227 kg Working hours: 268 h Condition: excellent, new CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS Guodox Uyf Aspfx An Ieg - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, mileage: 500 km, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 35,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Mercedes-Benz Arocs 5 3546 8x4 EURO6 with Schwing concrete pump S 43 SX III 5-section boom ???including Easy-Flex outrigger system??? First registration: unregistered Mileage: 500 km Color: Arctic White Technical Data * Power: 335 kW * Horsepower: 455 hp * Tire size, front and rear: 315/80R22.5 * Gross vehicle weight: 35,000 kg * Emission class: Euro 6e * Transmission: automatic, Mercedes Powershift 3 * Condition: New vehicle Chassis Equipment * Twin-plate clutch * M cab Classic-Space, 2.30m, tunnel 320mm Guedpfxoi Tkbdo An Ijg * Comfortable cab suspension * Front axle: 7.5t, straight version * Rear axle: 13.4t, bevel gear 233, planetary gear * Transmission oil cooler * Fuel tank: 290L aluminum + 25L AdBlue * Disc brakes, front and rear * Sun visor * Air conditioning * ABS + ASR * Driver's comfort air-suspension seat, velour leather * Fog lights, LED daytime running lights * Multimedia cockpit, interactive with navigation and Bluetooth * Cruise control * GSR (General Safety Regulation) equipment as follows: * Lane Keeping Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * Pre-installation for breathalyzer with immobilizer * Rear view camera Superstructure Equipment * Schwing S 43 SX III 5-section concrete pump, 43m * Number of joints: 5 * Delivery line: Super 2000 DN 125 * Vertical reach: 42.30m * Horizontal reach from turntable: 37.55m * Placing boom: 43RZ * Pump type: P2525-120/85 * Theoretical concrete delivery rate: 162 m3/h * Vector control system * Slide valve system: B-Rock * Electric vibrator system on hopper grate * Slewing range: 2 x 365° * Outrigger system: Easy-Flex, CE * Filling height: approx. 1350mm * Hydraulic drive, max. volume: 636 l/min. * Delivery cylinder diameter: 250mm * Water tank: 610l, roller water pump * Remote control: Schwing Control 30 * Oil cooler * MPS control system Non-binding offer ex works Cologne. Subject to prior sale and errors. Sale only to commercial customers.

Year of construction: 2006, condition: new, Hydraulic piston diaphragm pump, NEW Type:HMD-G-20-0125-PP Flow rate: approx. 10 m³/h Delivery pressure: 15 bar Year of construction: 2006 Pump #: 5100288-14 Further data: see type plates Area of ​​application: filter press feed, sludge transport, reactor feed in industry, mining, water and waste water management, etc. Delivery time: Available from stock Gladbeck! Guodoix I N Eepfx An Ijg We offer you advice and service for all ABEL pumps, large ABEL spare parts warehouse, fast availability.

Year of construction: 2006, condition: new, Hydraulic piston diaphragm pump, NEW Type:HMD-G-20-0125-PP Flow rate: approx. 10 m³/h Delivery pressure: 15 bar Year of construction: 2006 Pump #: 5100288-14 Further data: see type plates Area of ​​application: filter press feed, sludge transport, reactor feed in industry, mining, water and waste water management, etc. Delivery time: Available from stock Gladbeck! We offer you advice and service for all ABEL pumps, large ABEL spare parts warehouse, fast availability. Gedpjix I Rfsfx An Isug

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 26 kW (35.35 HP), type of input current: three-phase, type of cooling: air, overall weight: 358 kg, input voltage: 400 V, total width: 1,150 mm, total length: 1,300 mm, total height: 1,600 mm, warranty duration: 12 months, heating capacity: 30 kW (40.79 HP), Aircooled Chiller/Heat pump Blue Box Epsilon Echos DK RF HP 26 kW Cooling capacity: 26 kW (12/7 — 35°C) Heating capacity: 30 kW (40/45 — 7°C) Year of manufacture: 2018 Options: Heat pump Heat exchanger: Plate Type of refrigerant: R410A Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Copeland (scroll) Number of fans: 1 pcs. high-pressure Dimensions: 1.30 x 1.15 x 1.60 m Weight: 358 kg Working hours: 3 h Condition: Excellent, new CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup Gedpfx Anjx Ux T Ss Ieug After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, mileage: 500 km, power: 290 kW (394.29 HP), fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro3, Equipment: ABS, air conditioning, Mercedes Benz Arocs 5 4140 8x4 EURO3 with Schwing concrete pump S 43 SX III First registration: without registration (registration in Europe not possible) Mileage: 500 km Color: Arctic white Technical data * Power: 290 kW * Horsepower: 394 hp * Front axle tires: 315/80R22.5 * Rear axle tires: 315/80R22.5 * Total weight: 41,000 kg * Emission class: Euro 3 * Transmission: Automatic (Mercedes-Benz Powershift 3) * Condition: New vehicle * Wheelbase: 5750 mm Chassis equipment * Twin-disc clutch * M cab, Low Roof, 2.30m, tunnel 170mm * Front axle: 7.5t, straight design * Rear axle, bevel gear 300, planetary gear 13.4t * Transmission oil cooler * Steering system: Servotwin * Fuel tank: 390L, aluminum * Sun visor * Air conditioning * ABS + ASR * Driver's seat: Schwing seat * Radio with USB, instrument cluster 10.4cm * Pre-wiring for CB radio * Pre-wiring for rotating beacons * Cruise control Superstructure equipment * Schwing S 43 SX III 5-arm concrete pump * Number of joints: 5 * Delivery line: Super 2000 DN 125 * Vertical reach: 42.30m * Horizontal reach from swivel: 37.55m * Placing boom: 43RZ * Pump type: P2525-120/85 * Theoretical concrete delivery rate: 162 m3/h * Vector control system * Slide system: B-Rock * Electric vibrator on hopper grid * Swivel range: 2x 365° * Outrigger system: Full support, CE * Filling height: approx. 1350mm * Hydraulic drive, max. V 636 l/min * Delivery cylinder diameter: 250mm * Water tank: 610l, roller water pump * Remote control: Schwing Control 30 * Oil cooler Gujdpfx Anei Ti Umo Ieg * MPS control system Non-binding offer EXW Cologne. Subject to prior sale and errors. Sale to commercial customers only. We speak German - We speak English - Hablamos español - Nous parlons français - Мы говорим по-русски - نحن نتكلم العربية

Year of construction: 2006, condition: new, Hydraulic piston diaphragm pump, NEW Guodsix I Rqjpfx An Ijg Type: HMD-G-12-0060-PP Flow rate: approx. 5 m³/h Delivery pressure: 15 bar Year of construction: 2006 Pump #: 5100288-12/PPM49b Further data: see type plates Area of ​​application: filter press feed, sludge transport, reactor feed in industry, mining, water and waste water management, etc. Delivery time: Available from stock Gladbeck! We offer you advice and service for all ABEL pumps, large ABEL spare parts warehouse, fast availability.

Condition: used, functionality: limited functionality, Great deals, top prices – please inquire. I am offering 4 used, refurbished Flow high-pressure pumps with oil coolers, see below: Pump 1 Flow 7XD -60, 7856 operating hours, 2 intensifiers, both working simultaneously, 4.5 l/min, 45 kW motor, oil-water cooling, Pump 2 Flow 7XD -60, 25179 operating hours, 2 intensifiers, both working simultaneously, 4.5 l/min, 45 kW motor, oil-air cooling, Pump 3 Flow 20XR, 48000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling Pump 4 Flow 20XR, 55000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling The pumps are from a single original owner and are in good condition. Pump 1 + Pump 2 are already ready for shipping and have been tested. Gujdpfx Anozivhto Isg Pump 3 + Pump 4 are also available at a special price as a unit or for self-installation. Both pressure intensifiers per pump have been completely overhauled. Prices available upon request.

Condition: used, Year of construction: 2020, HTST ARSOPI 500 Litres Pasteuriser built in 2020 by Dairy Machinery UK and Arsopi, This machine is self heated by heating element of 9kw , It is mounted on a stainless steel frame and comes with a control panel, balance tank, auto valves, product and water pump, 1" inlet and outlet pipes which also act as a CIP loop. The complete process is run automatecly with a divert valve to ensure pasteurisation temperatures and milk flow . The machine has hardly had any use and is in perfect condition. We can support this Pasteuriser in full starting from the controls all down to the gaskets of the PHE . Machines that Can Be added with on extra sale are the below : 1) SEPARATOR Specifications Manufacturer :Seital/SPX Model :SE05 Condition : Used Stock Number:834 Manufacture:Seital Capacity : 1200 L/h Cleaning : Manual Cleaning Tools : Included Manual Book : Included Base Frame : Included 2) HOMOGENISER Specifications Manufacturer : GEA Model: NS20002H Year : 2009 Condition : Used Serial Number : 7818 Stock Number 110613074 Capacity : 30 L/H on 600 Bar Capacity : 500 L/H on 200 Bar Working Pressure: 200 to 600 bar Max No. Stages: 2 condition : Very Good condition Available: Immediately SOLD AS A COMPLETE PACKAGE OR SEPARATE Volume capabilities (litres): 500 Balance Tank: Included PHE Temperatures: 4-45-55-65-72-4 Guedpfx Aey Ry Hren Ieg Outlets: Separator and Homogeniser Outlets Divert Valve: Included Dimensions in cm : 160 x 80 x 200 Product Pump: Included Hot Water Pump: Included Comtrols: HMI Touch Screen CIP: Program included for self Clean in Place Specifications Manufacturer: Seital/SPX Model: SE05 Condition: Used Stock Number: 834 Manufacture: Seital Capacity: 1200 L/h Cleaning: Manual Cleaning Tools: Included Manual Book: Included Base Frame: Included Manufacturer: GEA Model Homogeniser: NS20002H Year: 2009 Serial Number: 7818 No. Stages: 2 Condition Homogensier: Very Good condition Available: Immediately

Condition: refurbished (used), Year of construction: 2000, table length: 1,000 mm, table width: 1,000 mm, operating pressure: 3,800 bar, (Pictures in current state) - prepared for two cutting heads (1x pure water) - Control unit will be renewed - will be sandblasted and repainted - Pump optionally available - available after order in 12-16 weeks Special features: - max. two cutting heads per Z-axis - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Gsdpfonab Rlex An Ioug Contact us and we will make you a customized offer!

Condition: used, This listing is for Pfeiffer MVP020 Vacuum Pump (MVP020) The unit is in full working condition and ready for immediate use Compact, oil-free diaphragm vacuum pump designed for clean and quiet operation. Ideal for laboratory processes requiring consistent vacuum such as filtration, drying, and rotary evaporation support. Robust build ensures long-term reliability with minimal maintenance. Transparency Report and Technical Audit: • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished) Guedpey Ehpqsfx An Ieg

Condition: new, functionality: fully functional, power: 210 kW (285.52 HP), fuel type: electric, color: silver, overall weight: 27,000 kg, empty load weight: 27,000 kg, operation weight: 36,000 kg, maximum load weight: 50,000 kg, tire size: 6*2, tire condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, machine/vehicle number: MYM-J57C90, Equipment: hydraulics, low noise, rubber tracks, Mobile Crusher: Smart C&D Waste Recycling Solution Turn Demolition Debris into Profit Construction and demolition waste accounts for 30-40% of global waste. Our mobile crushing solution processes C&D waste on-site, transforming costly debris into valuable recycled aggregates. Technical Specifications 900×1060 Mobile Jaw Crusher Crusher Unit: Jaw opening: 900mm × 1060mm Max feed size: 750mm Output size: 75-200mm (adjustable) Capacity: 80-180 TPH Power: 90-110 kW Vibrating Screen: 2-deck or 3-deck configuration Screen area: 3.6-4.8 m² Motor power: 15 kW Produces 3-4 aggregate sizes simultaneously Feeder: Belt width: 1000mm Variable speed: 0-25 m/min Power: 7.5 kW Hopper capacity: 5-8 m³ Overall: Dimensions: 12-14m (L) × 2.8-3.2m (W) × 3.8-4.2m (H) Weight: 38-45 tons Total power: 120-150 kW Fuel consumption: 25-35 L/hour (diesel option) What We Process ✓ Concrete (plain & reinforced) ✓ Asphalt pavement ✓ Bricks and masonry ✓ Tiles and ceramics ✓ Mixed demolition debris ✓ Road construction waste Complete Recycling Process 1. Feeding Large hopper (5-8 m³) receives mixed C&D waste up to 750mm 2. Primary Crushing 900×1060 jaw crusher reduces material to 75-200mm with 4-6:1 reduction ratio 3. Magnetic Separation Automatic removal of steel rebar (>95% recovery rate) 4. Screening Multi-deck screen produces multiple grades: 0-5mm (sand) 5-10mm 10-20mm 20-40mm 5. Dust Control Integrated water spray system (8-12 nozzles) achieves >90% dust suppression Key Features Mobility: Track-mounted: Self-propelled, 0.8-1.2 km/h Wheel-mounted: Highway transportable Setup time: 30-60 minutes 360° working radius Automation: PLC control system Remote operation (50m range) Real-time monitoring Automatic overload protection Performance: Concrete: 120-150 TPH Asphalt: 100-130 TPH Mixed waste: 80-120 TPH Guedpfx Aoq Nf Tven Iog Screening efficiency: >95% Output Products Recycled Aggregates: 0-5mm: Concrete, mortar (15-20% output) 5-10mm: Asphalt mix, drainage (20-25%) 10-20mm: Concrete, road base (25-30%) 20-40mm: Sub-base, backfill (25-30%) Applications Building demolition Highway reconstruction Bridge dismantling Airport runway recycling Disaster debris management Urban renewal projects Service Package Included: Factory testing Installation supervision Operator training (3-5 days) 12-month warranty Lifetime technical support Spare parts availability Get Started Transform C&D waste from cost to profit. Our 900×1060 mobile crusher delivers proven performance, exceptional ROI, and environmental sustainability. Contact us for: Detailed specifications Custom configurations Site assessment Equipment demonstration Competitive quotation Make waste work for you. Choose proven mobile crushing technology for sustainable C&D recycling.

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Gusdpfxoy D Rk Is An Ijg Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Year of construction: 2018, condition: used, This listing is for the Hamilton Microlab Star M The unit is in full working condition and ready for immediate use This Unit is supplied with: - PC With Software - Thermo Scientific Haake A25 Heating and Cooling Water Bath and SC100 Circulator - ODTC Power and Control Unit - Hamilton Heater and Shaker Box - Spare Parts and Consumables (please see pictures) - Original Manuels and Guides Gujdpfx Ansy Eyqys Isg A precision liquid handling system designed for automated pipetting and sample preparation. Known for accuracy and repeatability, it supports efficient lab workflows in research and analytical environments. Compact and user-friendly design. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 2,000 h, AMV 7450D SHOTCRETE ROBOT – DISMANTLED SHOTCRETE APPLICATION UNIT – 2012 For sale: a professional, dismantled AMV 7450D Shotcrete Robot application unit, designed for wet-mix shotcrete application. The unit was manufactured by the renowned Norwegian company AMV Andersen Mek. Verksted AS, which specializes in the design of machinery for tunnel, mining, and underground operations. IDENTIFICATION DATA: * Manufacturer: AMV Andersen Mek. Verksted AS, Norway * Model: AMV 7450D Shotcrete Robot * Year of unit manufacture: 2012 * Serial number: 12-0070 * Year of base vehicle manufacture: 2012 * Original chassis: Mercedes-Benz Actros * Type: mobile shotcrete robot * Application technology: wet-mix method * Number of operators: 1 * Operating voltage: 400 V AC * Permissible/technical weight as indicated on the AMV nameplate: 44,500 kg – parameter related to the complete machine configuration * Current condition: unit is dismantled from the chassis KEY OPERATIONAL PARAMETERS: * Maximum concrete pump output: up to 25 m³/h * Vertical reach of the boom: approximately 13.7 m * Horizontal reach of the boom: approximately 13.7 m * Working material: shotcrete * Operating method: wet-mix shotcrete application * Working system: specialized tunnel boom with spray nozzle * Unit power supply: 400 V AC Gsdpfx Anszw T Sxe Isug * Water tank: capacity to be confirmed * Operating pressure of the system: to be confirmed based on technical documentation * Actual weight of the dismantled unit: to be confirmed DEVICE DESCRIPTION: The AMV 7450D is a specialized shotcrete robot designed for efficient and precise application of concrete in challenging underground environments and on large infrastructure projects. The extended working boom allows for shotcrete application at height and in hard-to-reach locations that are inaccessible to conventional concrete pumps. The output of up to 25 m³ of concrete per hour enables efficient execution of large areas and work requiring rapid ground stabilization. The machine is designed to be operated by a single operator. This solution reduces the number of workers in the immediate shotcrete application zone, improving safety and control over the process. * construction of concrete tunnel linings, * shotcrete application in road and railway tunnels, * mining and quarrying operations, * reinforcement of underground excavations, * securing rock walls and ceilings, * ground stabilization after excavation, * reinforcement of shafts and underground chambers, * construction of subways and other underground structures, * stabilization of slopes and embankments, * execution of landslide protection measures, * geotechnical works, * protection of foundations and deep excavations, * reinforcement and repair of concrete structures, * repair of dams, canals, and other hydraulic structures, * protection of rock surfaces against spalling, * work on hydroelectric power plants and technical tunnels, * execution of specialized infrastructure contracts. The equipment is intended primarily for tunnel, mining, geotechnical, construction, and hydraulic companies, as well as companies engaged in the repair and modernization of specialized AMV machinery. Additional photos, videos, nameplate photos, and information regarding the included equipment can be provided. Please feel free to contact me for further information and to arrange a viewing.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, total height: 2,200 mm, total length: 1,700 mm, total width: 1,100 mm, rotational speed (max.): 2,650 rpm, power: 1.6 kW (2.18 HP), water tank capacity: 100 l, RÖSLER RZ 150 A cleaning system – automatic sludge removal For sale: a professional RZ 150 A cleaning system with automatic sludge removal. This unit is designed for industrial use, fully automated, and equipped with modern solutions to increase efficiency and durability. Key parameters: • Dimensions: 1700 x 1100 x 2200 mm • Power: 1.6 kW • Rotor speed: 2650 rpm • Rotor made of aluminum alloy • Steel housing Equipment and functions: • Smooth start and stop thanks to the frequency inverter • Adjustable sludge removal speed • Automatic retraction of the cleaning blade • Automatic removal of remaining water • Electronic vibration control • Automatic rotor flushing • Special bearing lubrication system to extend the unit's service life Central control unit E61-400: • Control and monitoring of the cleaning system • E61-400 control unit • SIEMENS S7-1200 controller • Ensures automatic and stable operation of the entire system Sludge removal time is adjustable from 2 to 5 minutes, depending on the consistency. A single cycle removes up to 25 kg of sludge. Gsdpfx Ajzca Apjn Isug Additional system equipment: • Sandpiper P9 diaphragm pump for supplying water to the centrifuge • Pump operation cycle control • Water level control in the tank The set also includes a P 100 SB-P9 buffer tank for residual dirty water from the centrifuge. The tank is required if the centrifuge is located far from the source of dirty water. P 100 SB-P9 buffer tank: • Height: 700 mm • Capacity: 100 l • Designed for transporting dirty water and rotor flushing water to the buffer tank • Made of durable HDPE polyethylene (black color) • Sloping, 3-sided funnel-shaped bottom • P9 diaphragm pump – operating pressure 4 bar • Water level control RSKM 30 waste container: • Capacity: 300 l • Dimensions: 1300 x 820 x 800 mm • Manual operation • Can be transported and emptied using a forklift • Made of steel • Discharge port with drain plug • Equipped with a tilting mechanism The unit is robust, efficient, and ready for operation.

Condition: used, This listing is for Akta Process sample pump. The unit is in full working condition and ready for immediate use. High-performance liquid chromatography sample automation pump optimized for scaling up biopharmaceutical manufacturing and reliable laboratory fluid delivery. [[1](?selectedProduct=28956095), [2](), [3]()] Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) [[1](), [2]()] Software and Media Disclosure: Gujdpfx Asxhga Ron Ijg As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. [[1](), [2]()] Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Condition: Direct-from-Bench (Decontaminated/Original) • Source Pedigree: Biotech / Research Facility

Condition: repair required (used), Year of construction: 2007, operating hours: 67,367 h, functionality: not functional, machine/vehicle number: W288, repeat accuracy: 0.01 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.01 mm, workpiece weight (max.): 3,000 kg, type of input current: three-phase, input voltage: 250 V, sheet thickness aluminum (max.): 100 mm, table length: 3,000 mm, operating speed: 6,000 mm/s, table width: 1,500 mm, tank capacity: 5,500 l, pressure: 3,600 bar, positioning speed: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 2 m/min, table height: 1,000 mm, operating pressure: 3,600 bar, year of last overhaul: 2024, waste water connection: 50 mm, input frequency: 50 Hz, power: 120 kW (163.15 HP), controller manufacturer: Bystronic, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: safety light barrier, Bystronic Byjet 3015 Waterjet. This machine has a 3000 x 1500 cutting table up to 200mm thickness, complete with two cutting heads. The waterjet is powered by a Bypump 50 APC hydraulic unit. This machine was regularly serviced by a Bystronic service engineer. This machine is being sold as as a spare parts machine, but could be easily put back in production. It has a new hydraulic pump fitted shortly before it was taken out of production. It comes complete with a chain conveyor with paddles for the automatic removal of used garnet from the cutting beds. It also comes with an air blower and reservoir tanks for the raising and lowering of the water levels in the cutting bed for reducing the noise levels during the cutting process. Gjdpfozlt Ayex An Isug

Condition: new, Year of construction: 2016, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 6 bar, total height: 1,500 mm, total width: 700 mm, total length: 1,600 mm, Equipment: documentation/manual, For sale is a system that is still in its original packaging and located in the warehouse. The system has never been put into operation. Only the originally installed Grundfos pump was removed and replaced with a new replacement pump. Otherwise, the overall condition of the system corresponds to its original delivery condition. The system includes: Water softening system Pre-filter Ultrafiltration system with a downstream reverse osmosis system Activated carbon filter Gusdpfx Anszbib Sj Iog UV lamp All installed components and wear parts, such as filter cartridges, filter inserts, replacement UV lamp, etc., are included as spare parts. The system will be packaged and prepared for transport on four Euro pallets and one larger disposable pallet. The original purchase price was €47,788.47 net. Use of UF membranes for the filtration of viruses, bacteria, and cysts. Important minerals such as calcium and magnesium are retained after UF filtration and do not need to be added back using complex and expensive technology. - Health centers and dental practices, where people are exposed to particularly high risks of infection from waterborne pathogens. - Hotels and restaurants to provide high-quality and safe drinking water for consumption, food preparation, showering, and washing. - Legionella prevention in showers in public buildings. - Complete drinking water treatment in the household sector to improve drinking water quality for consumption, food preparation, showering, and washing. - Well water treatment