Used Waste Water Pump for sale (17,356)

Year of construction: 2023, operating hours: 100 h, condition: good (used), functionality: fully functional, Water treatment system for compounding and extrusion plants For sale is a complete industrial water treatment system for supplying a compounding or extrusion plant with softened and fully demineralized process water. The system consists of pre-filtration, a dual softening unit, a reverse osmosis unit, a 3,000-liter permeate tank, and a frequency-controlled dual booster pump unit. The system is particularly suitable for closed-loop cooling water circuits and for applications where a consistently high water quality and a reliable supply to the production plant are required. System configuration Pre-filtration and protection Backwash filter for mechanical impurities Flow rate: 7.5 m³/h at a pressure drop of 0.5 bar Automatic, time-controlled backwash System separator with a KVS value of 12 m³/h Connection size: R 1" Pressure regulator with a DIN flow rate of 5.3 m³/h Safety module Connection block with integrated bypass and sampling valve Flexible pressure hoses, length 1,000 mm, Rp 1", up to 10 bar Dual softening unit Dual softening unit for continuous operation Nominal flow rate: 2.9 m³/h Capacity: 200 m³ × °dH each Resin disinfection system Salt deficiency switch with potential-free alarm or low-level signal Sampling group with pressure gauge and sampling valve Hardness control unit for wall mounting Installation fitting for 1" pipe Due to the dual design, one softening column can be regenerated while the second column continues to supply softened water. Reverse osmosis unit Reverse osmosis unit with vertically arranged high-performance modules, permeate recirculation, and automatic concentrate flushing. Technical data: Permeate flow rate at 15 °C: approx. 450 l/h Recovery rate: approx. 75 % Salt rejection rate: approx. 98.5 % Required inlet pressure: 2–6 bar Feed water connection: DN 25 Permeate connection: DN 20 Concentrate connection: DN 15 Supply voltage: 3 × 400 V / 50 Hz Dimensions: approx. 1,800 × 610 × 810 mm (H × W × D) Dedezt Sb Djpfx Aggekt Permeate tank Black PE storage tank Capacity: 3,000 liters With level control and various connections Dimensions: approx. 1,750 × 995 × 2,450 mm (H × W × D) Dual booster pump unit Pre-assembled and electrically wired booster pump unit on a stainless steel frame, ready for connection. Equipped with two pumps and integrated frequency converters for constant and demand-based pressure supply. Technical data: Nominal flow rate per pump: 2.0 m³/h Nominal head: 43.6 m Flow rate with one pump: approx. 0.6–3.0 m³/h Flow rate with two pumps: approx. 1.2–6.0 m³/h Delivery pressure at maximum flow rate: approx. 2.5 bar Zero flow head: approx. 6.7 bar Factory-set constant pressure: 4.0 bar Pre-pressure of the diaphragm expansion tank: 3.5 bar Measuring range of the pressure sensors: 0–10 bar Diaphragm expansion tank: 8 liters Permissible water temperature: 1–30 °C Permissible ambient temperature: 1–40 °C Suction connection: DN 65 / PN 10, loose flange Pressure connection: 50-mm socket Supply voltage: 3 × 380–500 V Motor power: 2 × 1.1 kW Nominal current per pump: 2.2–1.9 A Dimensions: approx. 950 × 700 × 858 mm Dry weight: approx. 55 kg Technical specifications based on available documentation. Subject to prior sale and errors. An inspection of the system is possible by prior arrangement.

Condition: ready for operation (used), * Brand: HEPU Dkedpfx Ajywmlzeggst * Model: freshwater pump * Driving: 22 kW E-motor

Condition: new, Year of construction: 2016, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 6 bar, total height: 1,500 mm, total width: 700 mm, total length: 1,600 mm, Equipment: documentation/manual, For sale is a system that is still in its original packaging and located in the warehouse. The system has never been put into operation. Only the originally installed Grundfos pump was removed and replaced with a new replacement pump. Otherwise, the overall condition of the system corresponds to its original delivery condition. Dksdpfszbib Sex Aggst The system includes: Water softening system Pre-filter Ultrafiltration system with a downstream reverse osmosis system Activated carbon filter UV lamp All installed components and wear parts, such as filter cartridges, filter inserts, replacement UV lamp, etc., are included as spare parts. The system will be packaged and prepared for transport on four Euro pallets and one larger disposable pallet. The original purchase price was €47,788.47 net. Use of UF membranes for the filtration of viruses, bacteria, and cysts. Important minerals such as calcium and magnesium are retained after UF filtration and do not need to be added back using complex and expensive technology. - Health centers and dental practices, where people are exposed to particularly high risks of infection from waterborne pathogens. - Hotels and restaurants to provide high-quality and safe drinking water for consumption, food preparation, showering, and washing. - Legionella prevention in showers in public buildings. - Complete drinking water treatment in the household sector to improve drinking water quality for consumption, food preparation, showering, and washing. - Well water treatment

Condition: like new (used), Year of construction: 2023, x-travel 4216,0 mm y-travel 2007,0 mm z-travel 305,0 mm control CNC table-size 4902,0 x 2134,0 mm max. workpiece weight 1465 kg / m² machine weight ab. 2500 kg total power requirement 30 kW dimensions of the machine ca. 5486,0 x 3708,0 mm The compact waterjet cutting system in bridge design consists of a torsion-resistant torsion-resistant steel construction, which is coated with a special durable anti-corrosion coating. coating. Both the two X-axes and the particularly high Y-axis are based on the Y-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system. specially developed by OMAX for the special requirements of a waterjet cutting system. Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel high-pressure pipes - MAXIEM direct pump M4050 - OMAX Intelli-MAX PC control software for MAXIEM - OMAX PC control software Intelli-MAX Premium - Cutting head technology based on the A-Jet 5-axis angular cutting head - Height sensor for the A-Jet 5-axis angle cutting head Dkjdpfx Aeyclvnsggjt - Laser pointer as a positioning aid - Automatic desludging system MBM ASAS-ME - Compressed air injection for the MBM ASAS-ME automatic desludging system - Clamping and fastening set for sheet material and material holders - Collecting grid in the cutting basin - Sensors for automatic monitoring of the cutting process - Water treatment through water conditioning incl. water analysis - Omni-Start drilling aid (Vacuum Assist) for brittle and laminated materials

Condition: like new (used), Year of construction: 2021, machine/vehicle number: B440, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, rotational speed (max.): 300 rpm, rotational speed (min.): 60 rpm, Equipment: CE marking, rotational speed infinitely variable, OMAC B440 3600 VX Hygienic Rotary Lobe Pump Unit – Fully ATEX Rated – 2021 Complete hygienic rotary lobe positive displacement pump unit by O.M.A.C. S.r.l. (Italy), professionally decommissioned from an INEOS manufacturing facility. Fully matched ATEX drivetrain — pump, gearbox and motor all Category 2G (Zone 1) rated, suitable for installation in hazardous area environments. Suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Ready to install. Pump: Manufacturer: O.M.A.C. S.r.l., Italy Model: B440 3600 VX Year: 2021 Wetted parts: AISI 316L stainless steel Connections: 4" (DN100) hygienic tri-clamp ATEX: II 2G Ex h T4 Gb Gearbox: Motovario HR 101M helical reducer Dsdpfozmgdaox Aggekt Ratio: i = 4.88 Torque: 530 Nm ATEX dual-rated Motor: Cemp E3AB70 132M-4 — 7.5 kW 400V Δ / 690V Y, 1462 rpm ATEX: Ex db IIB T4 Gb IP55, IE3 efficiency Inverter-rated (S9 variable speed duty, PTC 120°C thermal protection) Pump shaft speed approx. 300 rpm at 50Hz (approx. 60–300 rpm range on inverter) Complete unit mounted on a stainless steel baseplate with forklift access. 3 identical units available — matched factory batch with consecutive serial numbers across pump, gearbox and motor. Price is per unit. Condition: New other. Excellent, clean condition throughout — see photos. Inspection welcome prior to purchase. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW Dedpfx Ajznz Ezjggskt • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: excellent (used), Year of construction: 2023, operating hours: 2,000 h, functionality: fully functional, Equipment: compressor, documentation/manual, Available immediately due to change in business direction. A complete, fully operational beverage production system currently used for the commercial manufacture of premium kombucha. The plant is equally suitable for the production of soft drinks, functional beverages, botanical drinks, syrups, flavoured waters, iced teas and other non-carbonated beverages. Manufactured from food-grade 304 stainless steel and certified to UKCA, CE and TÜV SÜD standards. Located in Ireland. Plant Specification • 4 × 4,000L Jacketed Fermentation/Process Vessels • 2 × 2,000L Mixing/Kettle Vessels with Whirlpool Mixing • 4,000L Cold Water Tank • 4,000L Glycol Tank • Plate Heat Exchanger • Siemens PLC Control System • Complete Glycol Chilling System • Pumps and Pipework throughout • Stainless Steel Process Pipework • 2 × 200L CIP Units • Fully integrated valves and sanitary fittings • Temperature controlled throughout production. Metered Pump Dsdpfozp Hkxex Aggokt Capabilities Suitable for production of: • Kombucha • Functional beverages • Soft drinks • Flavoured waters • Botanical drinks • Tea beverages • Juice blends • Syrups • Beverage concentrates • RTD drinks The integrated whirlpool system allows efficient ingredient incorporation and mixing. Condition • Fully operational • Currently in production • Well maintained • Excellent condition • Available for inspection under power Certification • CE Certified • UKCA Certified • TÜV SÜD Certified • Food Grade 304 Stainless Steel Location Ireland Can assist with dismantling and loading. Price POA / Offers Invited Alternatively willing to discuss sale of complete turnkey beverage manufacturing facility. Photos and videos available upon request.

Condition: good (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 84.5 kW (114.89 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,016 kg, input voltage: 400 V, total width: 1,200 mm, total length: 2,830 mm, total height: 1,800 mm, warranty duration: 6 months, heating capacity: 92 kW (125.09 HP), Aircooled chiller/Heat pump DAIKIN EWYQ085G XR036 84.5 kW / 92 kW Cooling capacity: 84.5 kW / 24.03 tons (12/7 — 35°C) Heating capacity: 92 kW / 26.16 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Copeland ZP235KCE-TWD-522 (scroll) + 1 pcs. Copeland ZP182KCE-TFD-477 (scroll) Type of refrigerant: R410a Number of fans: 6 pcs . Hydraulic module: 2 pcs. water pump Lowara CIE370/1V/D. Dimensions: 2.83x1.2x1.8 m Weight: 1016 kg Working hours: 10380/468 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Dedpjzxdacjfx Aggekt Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Year of construction: 2023, operating hours: 1,008 h, condition: ready for operation (used), Machine tool manufactured in 2023. This ECOKRAFT LP 22 features a power rating of 22.5 kW and a material bunker capacity of 4 m³. It includes a drum screen with dimensions of Ø 300 mm x Length 1,200 mm and a conveyor belt with a length of 3,600 mm. If you are looking to get high-quality processing capabilities, consider the ECOKRAFT LP 22 machine we have for sale. Contact us for further details. Dkjdpfx Ajzza Axeggot - Machine Type: Pellet Plant / Pellet Press Line- Power Rating (Cutting Mill): 22.5 kW- Material Bunker Capacity: 4 m³ (with discharge)- Material Container Automatic Operation Capacity: 4 m³ (discharge via conveyor belt)- Operating Hours (from HMI readout):- Power On Time: 3795 h- Total Press Run Time: 1008 h- Current Press Run Time: 1008 h- Removal Conveyor: 1158 h- Screening System: 1158 h- Water Pump: 609 h- Bunker Conveyor: 259 h- Bunker Discharge: 230 h- Bunker Agitator: 201 h- Cross Conveyor: 0 h- Drum Screen Dimensions: Ø 300 mm x Length 1,200 mm- Drum Screen Discharge Height: Max. 1,800 mm (variable height adjustment, side filling right/left)- Conveyor Belt Specifications: Length 3,600 mm, Discharge Height 2,600 mm, Belt Width 150 mm, Number of Cleats: 49, Motor Speed 46 rpm- Big-Bag Frame Vario 1.0: Suitable for size 95x95x100 cm (1.0 m³)- Big-Bag Frame Vario 1.5: Suitable for size 95x95x150 cm (1.5 m³)- Optional Equipment & Features:- Pellet Press LP22- Load-dependent feed control- Rotary valve- Frost-proof control panel with touchscreen interface- Remote maintenance and fault analysis module- SMS module- Temperature monitoring and control for press room- Manual potentiometer for material flow regulation- Pressol pneumatic grease system (for 18 kg bucket)- Control cabinet with VFD for LP22 connection- Cable set for automatic operation- Level sensor

Year of construction: 2009, condition: refurbished (used), functionality: fully functional, 1 liquid ring vacuum pump. Please read the description carefully from beginning to end! The pump is not suitable for: Water, the food industry, and non-corrosive media. For these media, more cost-effective materials such as 1.4408 or 1.4571 are better suited. Caution! The pump does not have explosion-proof certificates. It is also not possible to replace the motor, as it is a special long-shaft motor. The mechanical seal also does not have EX certificates! The pump is made of the special Alloy 59 material! This alloy is used when conventional chrome-nickel steels are no longer sufficient in terms of corrosion resistance. Especially when chloride-induced pitting and crevice corrosion and stress corrosion cracking are a problem. Alloy 59 is used for: environmental technology, the chemical industry (chemical processes with oxidizing and reducing acids, resistance to wet chlorine gas), and waste incineration plants. Primarily, 2.4605 is used in the chemical industry, the pulp and paper industry, and in flue gas desulfurization plants. Excellent resistance to mineral acids such as nitric acid, phosphoric acid, sulfuric acid, and hydrochloric acid, and especially to sulfuric acid/hydrochloric acid mixtures. Typical applications are: -Equipment components for processes in organic chemistry with chloride-containing media, especially when catalysts based on chlorides are used. -Multipurpose plants in the chemical industry -Plant parts in the fine chemical and pharmaceutical industries -Scrubbers, heat exchangers, flaps, fans, and agitators for flue gas desulfurization plants (FGD) in fossil-fired power plants and waste incineration plants -SO2 scrubbers for ship diesel engines -Components for seawater and concentrated brines -Equipment and components for geothermal and sour gas applications -Reactors for acetic acid and acetic anhydride -Reactors for hydrofluoric acid -Sulfuric acid coolers -Piping in geothermal power plants -Components in flue gas desulfurization plants Manufacturer: Busch Type: LC 0220 A ZZO XX ZZ Volume flow: 195 m³/h Motor power: 7.5 kW Voltage: 400/690 volts Speed: 1440 rpm Vacuum: 33 mbar Material: 2.4605 (Alloy 59) NiCr23Mo16Al All ball bearings are new, and the mechanical seal has been refurbished by a specialist company. Weight: 121 kg Dimensions: Length 960 mm, Width 370 mm, Height 370 mm Connection: DN 50 (2") Dodpfeigqutsx Aggokt

Year of construction: 2025, operating hours: 255 h, condition: like new (used), functionality: fully functional, We are offering for sale a large-format, 5-axis CNC waterjet cutting machine, PTV WJ4080. The machine was manufactured in 2025, has only approximately 255 operating hours, and is in new condition (like new/demonstration machine). Regular service and maintenance have been performed exclusively by authorized technicians from the manufacturer, PTV. The machine is equipped with superior optional features for maximum precision (5-axis cutting head with bevel compensation) and gentle cutting of brittle materials. The machine is connected and ready for a demonstration. Technical specifications: • Manufacturer: PTV s.r.o. (Czech Republic) • Model: WJ4080-1Z-UJ-PJ-5AX (60°) • Year of manufacture: 2025 • Serial number: 70-1457 • Machine condition: Like new (as new, minimally used) • Operating hours: approx. 255 hours Dkedszg Dgxjpfx Agget • Working dimensions: 4,000 x 8,000 mm x +-180 mm • Enclosure protection class: IP54 • Electrical parameters and connection: • Voltage system: TN-C-S, 3+N+PE-400/230 V AC • Network frequency: 50 Hz • Infeed fuse: 25 A • Installed power: 5.5 kW • Power factor COS φ: 0.85 • Control circuit voltage: 24 V DC • Maximum short-circuit current of busbars: 10 kA Key features and technologies: • 5-axis cutting head (60°) with Progress Jet function: A system for active bevel elimination, which ensures a perfectly perpendicular cut and maximum dimensional accuracy, even at high speeds. • Gentle Piercing function: Controlled piercing with a smooth increase in cutting pressure. Ideal for brittle materials (glass, tiles, ceramics, stone, composites), where it completely prevents cracking or delamination of the material. • PTV JETS 3.8/60 Classic high-pressure pump: - Equipped with a frequency converter (dampens shocks, saves electrical energy, and extends the life of high-pressure components). - Integrated auxiliary pump for compensating low pressure in the supply water. • ARSA automatic sludge removal: Continuous mechanical cleaning of the tank/collector from used abrasive + integrated vacuum tube for easy manual cleaning. • Abrasive handling system: Pressurized abrasive feed unit PDA 1500. Bonus to the offer: We will provide 4 tons of high-quality abrasive free of charge with the machine, which allows the new owner to immediately start production without additional initial investment. The machine is fully functional, connected, and can be viewed and tested by prior arrangement. If you have any questions, need further information, or are interested in viewing the machine, please do not hesitate to send us a message or contact us by phone. We will get back to you promptly.

Condition: used, Year of construction: 2022, functionality: limited functionality, Complete, industrially manufactured water treatment system for ultra-pure, demineralized water, 400 l/h (< 3 µS/cm, depending on the raw water), delivered in December 2022. Multi-stage: raw water filter Berkofin KS25 HWS, compact demineralization ion exchanger BerkeSOFT midi 2-45, reverse osmosis Terion-S 500 with pressure pump/membrane modules, electrodeionization (CEDI), NaOH dosing for CO₂ removal, UVC sterilization Aquafides 1AF4+. 980-liter pure water storage tank with E+H Levelflex FMP51 and capacitive level sensors. Frequency inverter-controlled pressure boosting, 2 m³/h at 6 bar. High-quality industrial components (including KSB, Grundfos, Calpeda, WIKA, Bürkert, Balluff). Dkjdezmap Nspfx Aggjt Technical data: - Capacity 400 l/h, < 3 µS/cm; RO membrane set valid until 28.07.2025 (approx. 265 m³ treated) - UV lamp replaced on 01.10.2025 (approx. 5,350 operating hours); storage tank 980 l; pressure boosting 2 m³/h at 6 bar, frequency-controlled - Note: CEDI unit currently defective/clogged, capacity currently ~20 l/h; repair offer dated 24.09.2025 is available. Extensive documentation and manuals are available. More systems and equipment are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of the customer through the Köck auction house. Located in eastern Austria, exact address upon request. Collection/dismantling by the buyer.

Condition: good (used), functionality: fully functional, machine/vehicle number: zcfb1hf8002145558, mileage: 27,568 km, power: 160 kW (217.54 HP), first registration: 08/1995, fuel type: diesel, tire size: 10R22.5, axle configuration: 4x4, color: red, Year of construction: 1995, - All-wheel drive - 1600-liter water tank - Fire pump FPN 16/8 - Lighting mast - Ladder - Spare tire available Dedpfxszblk Ae Aggjkt - 2 vehicle keys - New TÜV inspection upon request Sold as is Subject to prior sale and errors Sale exclusively subject to our terms and conditions Important note – Important information: Despite careful review of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 of the German Civil Code (BGB). Rather, it provides information for initiating a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: good (used), Year of construction: 2021, functionality: fully functional, cooling capacity: 90.3 kW (122.77 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,375 kg, input voltage: 400 V, total width: 1,550 mm, total length: 2,250 mm, total height: 2,460 mm, warranty duration: 6 months, heating capacity: 105 kW (142.76 HP), Aircooled chiller/Heat pump GALLETTI EVI092HS2ASP01 90.3 kW/105 kW Cooling capacity: 90.3 kW / 25.68 tons (12/7 — 35°C) Heating capacity: 105 kW / 29.86 tons (40/45 —7°C) Year of manufacture: 2021 Options: Heat pump. Hydraulic module. Economizer. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZH146K1P-TWD-477 (scroll, soft starter) Type of refrigerant: R410a Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump EBARA 3M4E/E 40-160/0,55R SCA IE2 (Frequency inverter), expansion vessel. Dimensions: 2.25x1.55x2.46 m. Weight: 1375 kg. Working hours: 2034/1846 h. Condition: Used, tested, fully operational Dodpfx Aszwt S Eeggjkt CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Year of construction: 2022, condition: used, functionality: fully functional, This is a hood-type dishwasher from the manufacturer Meiko, model Upster H500 M2, manufactured in 2022, including feed/discharge tables, spray arm, and mobile water softener. The machine has undergone a major inspection in our in-house workshop and is therefore fully functional and free of defects. It comes with a 6-month warranty on all electrical components. The hood-type dishwasher has only 5388 operating hours and 9648 wash cycles and was used in a small company canteen that has since closed. You will receive an invoice with VAT shown. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested and fully functional. Flexible shipping or self-collection options. Competent advice – before and after the purchase. Provision of operating manuals, connection diagrams and spare parts. Inspection according to DGUV V3. Technical data: W x D x H: 635(687) x 750(850) x 1470 mm, feed/discharge table dimensions: 1200 x 700 mm Basket size: 500 x 500 mm Passage height: 440 mm Program run time: 90 / 150 / 210 s Basket capacity: 40 / 24 / 17 baskets/h (theoretical) Tank capacity: 22.0 L Rinse water quantity: 2.6 L/wash cycle Total connection value: 10.6 kW Fuse rating: 20A On-site boiler heating: 7.50 kW / 10.82 A Tank heating: 2.00 kW / 8.70 A Wash pump: 0.75 kW / 4.60 A Degree of protection of the machine: IP X4 Condition: Used, inspected and fully functional. Your advantages: Simplest operation thanks to clear and easy-to-understand symbols Digital temperature displays for wash and rinse water 3 program run times Eco-filter system for best cleaning results through warmer and filtered tank water Dkjdpfx Agozzlntjgot Machine and hood double-walled – ideal heat and noise insulation Hood open at the rear – prevents steam from bothering the operator Temperature-dependent extension of wash time – hygiene safety under all operating conditions Wash and rinse systems made of stainless steel Hood start automatic Including lye pump, pressure booster pump, as well as rinse aid and detergent dosing devices, basket equipment Optional: with built-in water softener EW 10 Standard equipment: Liquid detergent dosing device with suction lance for on-site storage containers Rinse aid dosing device with suction lance for on-site storage containers Connection set Lye filter system AktivPlus Pressure booster pump Basket basic equipment: 1 universal basket VKV 50/1 Additional equipment: Original Meiko feed/discharge tables Including spray arm Including mobile water softener Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to change and errors Do you have any questions, would you like to request advice or would you like to see something on site? You can reach us during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively according to our general terms and conditions (GTC).

Condition: used, functionality: not functional, total length: 5,150 mm, total width: 130 mm, total height: 1,800 mm, overall weight: 1,200 kg, Heudra auger pump with conveyor belt. This system can be used for the disposal of, for example, fruit waste. Dkjdpfx Agszuyzbjgst The substance is fed onto the conveyor belt, which then transports it to a hopper. From the hopper, the substance is pumped away by an auger pump. The machine is entirely made of stainless steel; the conveyor belt is made of plastic. Dimensions (w x l x h): 130 x 515 x 180 cm Dimensions of conveyor belt: 70 x 300 cm Dimensions of hopper: 80 x 60 x 90 cm deep The control panel for the motors is included, but the control system is missing.

Condition: used, This listing is for 1 of 2 Watson Marlow 504u Mk2 Peristaltic Pumps These units are in full working condition and ready for immediate release. The Watson‑Marlow 504U is a peristaltic (tube) pump designed for dosing, dispensing, or fluid transfer in laboratory, process, and industrial settings. Because of its design, the fluid only contacts the tubing, which helps with chemical compatibility, sterility, and ease of cleaning/maintenance. It features a fairly durable, washdown‑resistant housing (IP55) in many versions, allowing it to tolerate exposure to splashing or low‑pressure water jets. A few variants (e.g., “Mk2” or “Du”) bring updates in control, enclosure, and durability Other features: The manual for the 504Du version describes that the pump’s speed control ratio is 220:1, giving a minimum speed of 1 rpm (for the 220 rpm drive) and 0.5 rpm (for 55 rpm version). The pump is intended to be installed on a horizontal surface with good ventilation and free airflow around it. Dkjdpfx Agjxv Affsgjt The pump allows for remote control / automation through a 6‑pin port for auto/remote operation

Condition: used, This listing is for a Watson Marlow 604S Peristaltic Pump The unit is in full working condition and is ready for immediate release. The Watson‑Marlow 604S is a laboratory/industrial peristaltic (tube) pump, designed for dosing, metering, and fluid transfer tasks where the fluid must remain isolated from moving parts. It’s part of the “600” series of Watson‑Marlow pumps and is intended for relatively high flow rates in a controlled environment (e.g. labs, pilot plant, certain chemical or processing setups). Because it’s a peristaltic pump, the fluid only contacts the inner wall of a flexible tube, which makes it suitable for shear‑sensitive, corrosive or potentially particulated fluids, without contaminating the pump internals Strengths Clean & Isolated Flow: Because only the inner surface of the tubing contacts the fluid, there is no risk of cross‑contamination or fluid leaking into mechanical parts. Good Flow Capacity: With a relatively high maximum flow (≈ 11 L/min), it can handle moderate bulk transfer in addition to dosing. Robust Housing: The IP55 rating makes it resistant to dust ingress and water spray, which is beneficial in industrial or lab environments with splashes. Variable speed control: The broad control range allows fine tuning of flow. Dedpfx Aexv Ad Ujggekt Relative simplicity of maintenance: Replacing tubing is straightforward compared to more complicated pump mechanisms (valves, seals, diaphragms, etc.).

Year of construction: 2018, operating hours: 10 h, condition: good (used), functionality: fully functional, Subject: RZ125-315 pump with diffuser, impeller for water with blades - Pump operating parameters: Q = 80-150 m³/h H = 14.7-12.5 m - Material: cast iron, grade ŻL250 - Sealing: rope seal - With 3SIE160L-6 motor, 11 kW, 960 rpm, 400V 2. Quantity: 2 pcs. Djdpsztxvnsfx Aggekt

Year of construction: 2006, condition: as good as new (ex-display), machine/vehicle number: 31331, DISTILLER DNP 2000 SEMI-AUTOMATIC STEAM DISTILLATION SYSTEM - PROTEIN-NITROGEN Raypa DNP-2000 Year of manufacture 2006, unused Protein-Nitrogen distiller based on the Kjeldahl method. Automatic, to analyse protein nitrogen in raw material samples or processed material for the food industry. Specific methods available. Results comply with regulations: EN/ISO, AOAC. NITROGEN DISTILLER – DNP-2000 Features • Twenty free user programs. • Additionally, the system has three fixed programs: – Ammonium sulphate test. – Preheating of the system. – Sample waste washing. Advantages • Optional kit for automatic titration. • Sample suction. • 20 user programs. • Pump calibration by end-user. • Steam generator with water level control. • Boric acid pump. • Open door sensor. Performance • Measurement range: from 0,1 to 200 mg of N. • Nitrogen recovery: ᐳ 99,5%. • Reproducibility: ± 1%. • Distillation time: 4 min/100 ml. • Cooling water consumption: 1,2 l/min. • Power: 2000 W (100%). Programmable parameters and values • Water for dilution: 0-240 ml. • OHNa solution: 0-240 ml. • H3BO3 solution: 0-240 ml. • Reaction time (delay): 0-30 min. Dkjdpefiliwefx Aggst • Distillation time: 0-30 min or indefinite. • Steam power regulation: 30-100%. Safety • Closed-door detection. • Digestion tube detection. • Over-temperature thermostat. • Uses in the food industry but also in oenology for vinification. • Documents: Manual instruction + mounting gaskets and socket • For the Romanian companies, there is the possibility of selling in installments. Price Euro 3.600 + VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes, and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Leybold A700 Q deposition system (ebeam) Leybold A700 deposition system: Was used for deposition Titanium - Gold (ebeam) Ebeam deposition unit (Leybold) Vacuum pump Leybold D40-65B + Diffusion pump 2kW Proceschamber: Size: Width 680mm x Height 680mm x Depth 550mm Substrateholder diameter 650mm Incl. shielding Oring door Heaters Basepressure low 10-6mbar Electronics: Baseline cabinet (eneeds upgrade) Old PLC (for pump/vent) Gas cabinet/water: Various valves/flow reducers for gas and water Note: D&M Vacuumsystems can upgrade the system to new processes (E-beam or Sputter) incl. new electronics and software. Dkodpfxeuhcnij Agget EUR 37.500,-

Condition: new, machine/vehicle number: 6750, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 3,500 kg, color: black, gearing type: mechanical, number of seats: 3, Vehicle Description Fully equipped new food truck with a brand new kitchen. We offer flexible hire-purchase and leasing options. Please contact us. The vehicle is new and the kitchen has been built with great attention to detail. It is our mission to convert new and used vehicles into food trucks in accordance with regulations. Today, we are proud to say that our years of expertise have convinced our customers of the quality of our work. Visit us and experience the quality of our vehicles for yourself! Body construction made from isothermal aluminum-fiberglass laminate with an excellent aesthetic appearance. Ensures optimal interior temperature throughout the year. Permissible gross weight: 3,500 kg, Driving license class: B Emissions standard: Euro 6 Environmental badge: 4 (Green) Parking sensors Summer tires Catering equipment, kitchen made from stainless steel Gas appliances: Gas fryer “Bertos”, 2 x 8-liter basins, dimensions (W x D x H) 600 x 600 x 290 mm, output: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas stove “Bertos” with 4 burners, dimensions (W x D x H) 600 x 600 x 290 mm, output: 12.4 kW, made of stainless steel, G6F4B Gas griddle “Bertos”, smooth plate, dimensions (W x D x H) 600 x 600 x 290 mm, output: 8 kW, made of stainless steel, G6FL6B Cooling options: Refrigerator with glass front, suitable for beverages Small under-counter refrigerator "Liebherr" Water system: Water installation with canisters, 30-liter capacity with fresh and waste water tanks Two stainless steel sinks with fittings Hygiene package with paper towel dispenser and soap dispenser 10-liter hot water boiler Pump Lighting: LED ceiling lighting LED ambient lighting with color effects around the sales hatch, remote-controlled Emergency light Additional equipment: Serving counter and work surfaces made of brushed stainless steel Fire-resistant insulation wall at the cooking area Extractor hood with labyrinth filters Slip-resistant gastronomy flooring Sneeze guard (optional) Built-in insulated generator cabinet We take care of all required paperwork (TÜV inspection and certification) Warranty: One-year warranty on body and kitchen Manufacturer’s warranty from Renault This model can of course be customized! Dodpfezzcp Uex Aggjkt Need a shorter or longer version of this model? Need different equipment for this sales vehicle? Does your equipment require a higher payload or additional sales hatches? You can determine many vehicle features yourself!

Condition: used, This listing is for the Biotek Instruments Gast 7103034 Vacuum Pump 2. The unit is in full working condition and ready for immediate use. This Gast-manufactured pump provides consistent vacuum performance for laboratory applications including filtration and aspiration. Featuring a compact, oil-less design, it ensures low maintenance and clean operation. It is ideal for integration with BioTek washers or general benchtop fluid management. Transparency Report and Technical Audit: - Source Pedigree: Biotech / Research Facility - Condition: Direct-from-Bench (Decontaminated/Original) - Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. - Integrity: 100% Original Parts (Non-Refurbished) - Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Djdjywzgtspfx Aggjkt Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, Year of construction: 2017, x-travel 2010 mm y-travel 3010 mm z-travel 200 mm Capacity 4000 bar table load 1200 kg/m2 feed 10/5 m/min Table 3000 x 2000 mm control FANUC dimensions of the machine ca. 10,3 x 4,2 x 3,25 m used CNC water cutting machine in gantry style - high pessure pump 4000 bar - cutting tool WJS Basic cutting head, abrasiv dosing device - CAD/CAM software IGEMS 2D CAD, 2D CAM and AWJ modul - pressure vessel 200 ltr./ abrasive tower 1 tonne - abrasive controling package - abrasive disposal package Djdpfx Agszmitkogskt - Remote control software - collision protection package - nesting level 1 + 2

Condition: good (used), functionality: fully functional, Item: LC-100826-FristamFPE FRISTAM FPE STAINLESS STEEL CENTRIFUGAL PUMPS Manufacturer: Fristam Pumpen, Germany Pump type: Hygienic centrifugal pumps Series: FPE Material: Stainless steel Condition: Used We offer 3 Fristam FPE stainless steel centrifugal pumps, suitable for hygienic applications in the food, dairy, beverage, and processing industries. Available pumps 1. Fristam FPE 3532 A Type: FPE 3532 A Serial No.: 0438460197 Stainless steel pump housing Hygienic connections 2. Fristam FPE 2552/250A Type: FPE 2552/250A Serial No.: 0458460117 Stainless steel pump housing Hygienic connections 3. Fristam FPE 752/250A Type: FPE 752/250A Serial No.: 0482460083 Stainless steel pump housing Hygienic connections Applications Fristam FPE centrifugal pumps are designed for hygienic processing applications and can be used for transferring various liquid products, depending on the required capacity and product characteristics. Typical applications include: Djdpfx Agezuzc Hjgskt Dairy processing Milk and liquid dairy products Beverage production Food processing Water and process liquids CIP systems Other hygienic liquid applications The pumps have been disassembled and are available from our warehouse in Denmark. Motor power, RPM, and exact capacity are not specified at this time and should be confirmed before purchase. The pumps can be sold individually or together as a package. Location: Denmark Delivery: EXW Denmark Availability: Immediately available