Used Water Varnish for sale (7,538)

Year of construction: 2004, condition: used, Year of construction: 2004 Empty weight: 6.700 kg Ibedpfjx If Tlsx Am Dsc Dimensions (LxBxH): 390 x 170 x 210 cm

Condition: new, functionality: fully functional, Waters 2420 ELSD Low Flow Nebulizer. 2 for sale. 1 piece/590 EUR. Good working condition. Please check out our other listings as well. Iedpfxeua Iabe Am Dobc

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Isdpfxoua Tbwe Am Debc Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, For sale is a state-of-the-art CNC-controlled waterjet center consisting of 2 machines Machine 1: Robot with processing cell and integrated SERVO turning table. Machine 2: Robot with 2 processing cells and 2 integrated SERVO turning tables. This waterjet center is ideal for companies looking for a flexible and efficient solution for demanding cutting tasks. They are characterized by high precision, flexibility and reliability. - Robot arm NJ-16-3.1 Foundry: The robot has a load capacity of 16 kg and a working radius of 3100 mm. It is particularly robust and flexible, equipped with an IP65 protection class and is flange-mounted directly behind the cell. Ibedpjua U Tzsfx Am Djc - SERVO turning table: With a maximum load of 500 kg and a faceplate center width of 2800 mm, the interpolating turning table offers maximum precision and repeatability. - Processing cell: The processing cell measures 2350 x 4500 mm and is equipped with sound insulation. - High-speed roller shutter: Integrated into the cell wall, the high-speed roller shutter ensures safe access and complies with Machinery Directive 2006/42/EC. - SL-VI 30 Plus high-pressure pump: This pump achieves a pressure of up to 4136 bar, ideal for precise cutting processes. - Water cutting head: The water cutting head is a central component of the system and offers maximum precision. It is equipped with a high-pressure line feed, a manual change system for quick replacement. Additional features: - CNC control: Siemens 840D controller with integrated PROFINET for controlling the robot and integrated S7 319 safety technology. - Cyclone separator: Efficient system for particle separation - Programming options: The robot is programmed using simulation software, machining takes place in the CAM system and the programs are transferred via G-code. Main features Rotary table cells: - Robot arm NJ-16-3.1 Foundry: This robot has a load capacity of 16 kg and a working radius of 3100 mm. With an IP65 protection class, it offers a high level of robustness and flexibility. - SERVO rotary tables: The system is equipped with two SERVO rotary tables, each with a load capacity of 500 kg. These rotary tables enable precise machining of large workpieces with a maximum component size of 1000 x 1000 x 1000 mm. The repeat accuracy is ±0.15 mm with a rotation of 180° in just 5 seconds. - Machining cell: The machining cells each have a size of 2350 x 4250 mm. - 2 high-speed roller shutters: Integrated into the front wall of each cell, the cold-resistant and antistatic high-speed roller doors ensure safe access to the processing cell. The waterjet center offers outstanding processing flexibility and is suitable for various industrial PUR waterjet applications. Price on request or guide price < €300,000 Contact: For more information or to arrange a viewing appointment, please contact us on the telephone number provided.

Condition: used, HPLC Waters The system consists of the following modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow Control Modules Flow rate of 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates of 0.10 to 5.00 µl/min. Flow control module Flow rate of 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples, which it draws from microtiter plates or vials, into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, Iedpfx Aozg Tzxjm Dobc including a single standard wash, or it can do so in less than 60 seconds, including a double standard wash. The sample manager accepts plates with standard footprint, 5.03” x 3.365”, which correspond to SBS/ANSI-compliant plates (maximum height of 2.2 inches, including covers). The sample manager can store samples at any temperature between 4 and 40 °C (39 and 104 °F) under ambient conditions of 25 °C (77 °F) or less. Heating and capture module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient temperature to 65 °C (149 °F). The column base can be pivoted outwards into any position between 0° and 180°. In the 0° “home” position, the column base is located directly above the sample manager and can be connected to an optional optical detector. In the 180° “away” position, the analytical column can be connected to a mass spectrometer (on the right side of the system). The Synapt G2 is a Q-TOF-based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of the ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used not only for peptide identification (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Operating manual Condition: used Scope of supply: (See image) (Changes and errors in the technical data, information are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, No. 3280 Complete painting line / water-wash spray booths Used, system still completely assembled, from a furniture manufacturing company Large complete painting line, consisting of various water-wash spray booths, spraying equipment, extensive roller conveyor system as well as fresh air and exhaust air ducting Iedpfjzhblnsx Am Dsbc Several water-wash spray booths / spray walls Spray booths partly designed as 3-sided booths Turntable available Various spraying units / pumps available Extensive roller conveyors for workpiece transport Fresh air supply / air technology available Exhaust air ducts / extraction system available Lighting above the spray booths available Dimensions of the spray booths approx. 3000 x 2000 mm / 2000 x 2000 mm / 2500 x 2000 mm Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: excellent (used), operating hours: 4,500 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, table length: 3,656 mm, table width: 1,956 mm, High-Performance 5-Axis Waterjet Cutting Machine Well-maintained OMAX 60120 CNC Waterjet Cutting System equipped with a 30 kW (40 HP) EnduroMAX 4060 high-pressure pump. The pump has only 4,500 operating hours, making this machine an excellent choice for companies seeking a reliable and productive waterjet system with significant remaining service life. This machine is equipped with the OMAX A-JET 5-axis cutting head, enabling bevel cutting and complex 3D machining. The A-JET head offers a tilting angle from 0° to 59°, providing exceptional flexibility for chamfers, weld preparation, and advanced contour cutting. The machine features the integrated OMAX CAD/CAM control system, allowing direct import and processing of DXF files for fast and efficient production. Technical Specifications * X / Y / Z Travel: 3,000 × 1,500 × 200 mm * Working Area: 3,000 × 1,400 × 150 mm * Table Size: 3,656 × 1,956 mm * Maximum Workpiece Load: 2,000 kg/m² * Machine Dimensions: 5,715 × 2,794 mm * Machine Height: 2,921 mm * Machine Weight (table only): 2,818 kg * Operating Weight (including water): 10,545 kg * Water Tank Capacity: 7,727 liters Control System * Integrated OMAX CAD/CAM software, Intelli-MAX® Premium * Direct DXF file compatibility * Industrial PC controller Isdpfozi Hhqox Am Dsbc Electrical Specifications * Power Supply: 400 VAC, 50 Hz, 3-phase * Fuse Protection: 80 A High-Pressure Pump * Model: EnduroMAX 4060 * Pump Power: 30 kW (40 HP) * Operating Hours: Only 4,500 hours * Maximum Pressure: 4,100 bar * Flow Rate: 1.5-3.6 l/min * Pump Dimensions: 915 × 1,676 × 978 mm * Pre-filter: 0.2 micron * Integrated Water Pre-Booster: 6.7 bar Included Equipment * OMAX A-JET 5-axis cutting head (0°-59° tilt) * Abrasive hopper / abrasive feed system * Water treatment system * Sludge removal system Highlights * Premium OMAX 5-axis CNC waterjet cutting system * A-JET bevel cutting head with 0°-59° tilt * EnduroMAX 4060 pump with only 4,500 operating hours * Abrasive feed system included * Water treatment system included * Sludge removal system included * Integrated CAD/CAM software with direct DXF import * Large cutting area suitable for a wide range of materials * Robust industrial construction * Ready for immediate operation This is a fully equipped, high-specification OMAX waterjet system offering precision, flexibility, and low operating hours. An excellent opportunity for manufacturers looking for a premium CNC waterjet solution that is ready to go straight into production.

Condition: excellent (used), Year of construction: 2011, operating hours: 361 h, functionality: fully functional, machine/vehicle number: 7428122100001.105, pressure: 6 bar, power: 16,500 kW (22,433.73 HP), temperature: 120 °C, operating temperature: 120 °C, total height: 4,300 mm, total length: 8,700 mm, nominal heat output: 165 kW (224.34 HP), total width: 3,700 mm, tank capacity: 33,500 l, empty load weight: 35,000 kg, We offer this Viessmann VITOMAX 200 hot water boiler in very good condition, manufactured in 2011. Ibjdpfxozlc Eds Am Doc It is currently stored and preserved with nitrogen. Manufacturer: Viessmann Model: VITOMAX 200 Year of manufacture: 2011 Type: hot water boiler Operating hours: 361 If you have any further questions or require additional information, please do not hesitate to send us a message or call us. Ioan Munteanu

Condition: refurbished (used), functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 400 V, input frequency: 500 Hz, workpiece length (max.): 3,400 mm, workpiece width (max.): 1,800 mm, workpiece height (max.): 200 mm, table length: 4,500 mm, table width: 2,300 mm, table height: 1,800 mm, table load: 500 kg, 5-Axis Waterjet Cutting Center equipped with: - integrated working tank - 4.200 bar full electric e-drive™ - 19” numerical control - abrasive pressurized tank - cutting head - watercad-cam software Isdsxbgvfjpfx Am Debc accessories included - 5 axis ±55° interpolating system and touchwave ce-ramic™ - loading and unloading system - light laser barriers Included expenses: - Installation of the machine(s) - Machine full-load start-up - Practical training to BUYER’S staff on the machine functions

Condition: used, 100,000 litre – underground tank - double-walled - cleaned - 2 manholes - slight traces of dismantling present - internal coating possible upon request - Approved for service and firefighting water Loading and transport can be offered! Only serious and credible enquiries with the following details will be answered: Name, e-mail address and telephone number. Ibodpfsxcgg Tex Am Djc

Condition: used, This listing is for a Hanna Instruments HI 9060 Waterproof Thermistor Thermometer The unit is in full working condition and is ready for immediate release. The Hanna HI 9060 is a high-performance thermistor thermometer specifically engineered for use in challenging wet and humid environments. Its robust design and advanced features make it an essential tool for professionals in the food industry and other applications requiring precise temperature monitoring. Key Features: Waterproof and Rugged Design: Built to withstand harsh conditions, the HI 9060 is waterproof and can endure the rigors of busy environments, ensuring reliability in various settings. Dual-Level LCD Display: The intuitive dual-level LCD display shows the current temperature alongside the highest and lowest temperature extremes recorded during the session, allowing for quick assessments. Temperature Measurement: Measures temperatures in both degrees Celsius and Fahrenheit, providing flexibility for diverse applications. Interchangeable Probes: Compatible with a range of interchangeable probes (sold separately), enabling users to customize the thermometer for specific tasks or environments. Advanced Memory Functions: Equipped with memory capabilities that store high and low temperature readings, facilitating easy tracking and reporting of temperature variations. Long Battery Life: Enjoy an impressive battery life of up to 3000 hours, minimizing the need for frequent replacements and enhancing operational efficiency. Auto-Off Capability: The thermometer features an auto-off function that conserves battery life by shutting down after a period of inactivity. Low Battery Detection: Alerts users when battery levels are low, ensuring that the thermometer is always ready for use. Iedpfx Ajxxz Htjm Dobc Ideal Applications: Food Services: Essential for monitoring temperatures in kitchens, ensuring food safety and compliance with health regulations. Food Preparation: Perfect for checking temperatures during cooking and baking processes, helping to maintain quality and safety. Packaging: Ideal for verifying temperature conditions during food packaging, ensuring that products meet safety standards. Storage and Transport of Food: Crucial for monitoring storage temperatures in refrigerators and freezers, as well as during transit, to prevent spoilage. Wet and Humid Environments: Designed to thrive in damp settings, making it suitable for various applications beyond food service, such as laboratories or agricultural environments.

Condition: used, This listing is for a Thermolyne 16500 Dri-bath DB16520 The Thermolyne 16500 Series Dri-Bath (Model DB16520) is a laboratory dry block heater designed for applications requiring precise, stable temperature control for sample incubation, enzyme reactions, and other heating applications, without the need for water. It is part of the Barnstead/Thermolyne brand, recognized for its modular block design and high-quality construction. Iodpfxjxzh Nme Am Debc

Condition: used, Year of construction: 2015, functionality: fully functional, Water chiller, brand Eurocold, 15 kW (13,072 frigorías), model ACW-MP120 AL SL D2, with 65-liter tank, refrigerant R-407C, consumption: 6.4 kW, water flow from 20 to 100 liters/minute. Dimensions: 755x790x1380 mm (height), weight 190 kg. Applications: plastics processing, air conditioning, automotive, pharmaceutical chemistry, food industry, laser, machine tools, wine production, etc. Unit inspected, fully charged with refrigerant, with warranty. Delivery across Spain and Europe. Shipping costs not included. Reference: 1149. Available stock: 30 units. Isdpfx Aex Nf Npjm Dobc

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Ijdjy D Rk Ijpfx Am Djbc Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Condition: used, Year of construction: 2019, functionality: fully functional, 1,0 St. gebr. Temperiergerät mit 48 Regelstellen Hersteller: GAMMAFLUX Ibjdpfx Ameyxxz Do Dec Typ: GS1G030F024S4EJ Baujahr: 2019

Condition: ready for operation (used), Year of construction: 2010, operating hours: 1,760 h, functionality: fully functional, For sale: professional abrasive waterjet cutting machine MAXIEM 1530 by OMAX Corporation. Fully operational, ready to work. Technical specifications: - Work envelope X-Y: 3,100 × 1,575 mm - Pump: OMAX P2050V Direct Drive 30 HP (22 kW), up to 50,000 PSI (3,450 bar) - Control: IntelliMAX Basic with CAD/CAM - Drive: closed-loop, hardened precision ground shafts, linear encoder - Traverse speed: up to 20 m/min - Accuracy: ±0.13 mm - Z-axis: motorized Iedpoy Hgrmefx Am Debc Included accessories: - Terrain Follower, Optic Locator - 200 L abrasive delivery system - Basic tool box kit - Tool cabinet

Condition: used, empty load weight: 355 kg, overall weight: 1,600 kg, color: yellow, Year of construction: 2004, Trailer with water tank: + Blanchard Ibjdpfey E Rarex Am Doc + First registration: 16.02.2004 + Height-adjustable drawbar + Car coupling + Single axle + Unladen weight: 355kg; permissible GVW: 1,600kg + 1,000l water tank + 2x Hatz diesel engines with electric start -> 1B30, 7hp with pump and spray bar -> 1B40, 9.8hp with pump (provides low pressure) & hose reel Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and omissions possible, interim sale reserved!

Condition: ready for operation (used), * Brand: Schauenburg Iedpfeywm Agjx Am Dsbc * Model: dewatering * Surface: 3200 x 800 mm – 1 deck * Driving: 2 pieces E-motors of each 5,5 kW

Condition: ready for operation (used), * Brand: Skako * Model: dewatering screen Ibedpfx Ajywnhqom Dec * Surface: 4000 x 1500 mm __ 1 deck. * Screen opening: [] 12 x 0,8 mm. * Driving: 2 pieces vibration motors of each 4,3 kW.

Condition: good (used), 12V, 50Hz, 5A Application: Water treatment plant Width: 175 mm Height: 125 mm Depth: 75 mm Weight: 548 g Condition: good, second-hand Ibsdpfjzddblex Am Djc

Condition: excellent (used), mileage: 425,359 km, power: 265 kW (360.30 HP), first registration: 01/2001, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: red, driver cabin: day cab, gearing type: mechanical, suspension: steel-air, total length: 9,700 mm, total width: 2,530 mm, total height: 3,030 mm, Year of construction: 2001, = Additional options and accessories = - PTO = Notes = BELGIAN TRUCK, EX-FIRE DEPARTMENT 8000 LITER STAINLESS STEEL WATER TANK + MP10-1000 BRICK PUMP, 2003 PERFECT CONDITION = Further information = Technical information Number of cylinders: 6 Axle configuration Front axle: Steered; Suspension: Leaf spring Rear axle 1: Twin tires; Suspension: Air suspension Ibjdpfx Aezdlp Asm Dsc Rear axle 2: Lift axle; Suspension: Air suspension Weights Unladen weight: 11,485 kg Payload: 14,515 kg GVW: 26,000 kg Maintenance, history and condition APK (Technical inspection): valid until 07/2027 Technical condition: very good Optical condition: very good Further information Please contact Thierry Leemans for more information.

Condition: used, For sale: Complete washing and flotation system with water post-treatment. This system is used to remove and dewater sludge (mud, fine sand, clay, and other solid materials) from wastewater. Manufacturer = Tecnicas Hidraulicas S.A. (TH), a Spanish company specializing in wastewater treatment and sludge dewatering systems. Consisting of: - Washing drum: 2.4 m diameter; Length 4.5 m + 1.7 m - Construction material: Creusabro 4800 steel, 12 mm thick (Similar to Hardox) - Separation and flotation drum with 2 dewatering screens, collection tanks, and associated Warman pumps = top quality. - Lamella thickener tank, 4.5 meters diameter, with pump - EPS mixer - Archimedes screw Ibedpfxszbrp Sj Am Dsc - Water tank / reservoir, 10,000 liters - All necessary and associated Warman pumps and conveyor belts. Applications: Mining industry Dredging operations / dredged sludge Concrete industry Glass industry

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, total height: 2,200 mm, total length: 1,700 mm, total width: 1,100 mm, rotational speed (max.): 2,650 rpm, power: 1.6 kW (2.18 HP), water tank capacity: 100 l, RÖSLER RZ 150 A cleaning system – automatic sludge removal For sale: a professional RZ 150 A cleaning system with automatic sludge removal. This unit is designed for industrial use, fully automated, and equipped with modern solutions to increase efficiency and durability. Key parameters: • Dimensions: 1700 x 1100 x 2200 mm • Power: 1.6 kW • Rotor speed: 2650 rpm • Rotor made of aluminum alloy • Steel housing Equipment and functions: • Smooth start and stop thanks to the frequency inverter • Adjustable sludge removal speed • Automatic retraction of the cleaning blade • Automatic removal of remaining water • Electronic vibration control • Automatic rotor flushing • Special bearing lubrication system to extend the unit's service life Central control unit E61-400: Isdpfx Amozca Ape Dobc • Control and monitoring of the cleaning system • E61-400 control unit • SIEMENS S7-1200 controller • Ensures automatic and stable operation of the entire system Sludge removal time is adjustable from 2 to 5 minutes, depending on the consistency. A single cycle removes up to 25 kg of sludge. Additional system equipment: • Sandpiper P9 diaphragm pump for supplying water to the centrifuge • Pump operation cycle control • Water level control in the tank The set also includes a P 100 SB-P9 buffer tank for residual dirty water from the centrifuge. The tank is required if the centrifuge is located far from the source of dirty water. P 100 SB-P9 buffer tank: • Height: 700 mm • Capacity: 100 l • Designed for transporting dirty water and rotor flushing water to the buffer tank • Made of durable HDPE polyethylene (black color) • Sloping, 3-sided funnel-shaped bottom • P9 diaphragm pump – operating pressure 4 bar • Water level control RSKM 30 waste container: • Capacity: 300 l • Dimensions: 1300 x 820 x 800 mm • Manual operation • Can be transported and emptied using a forklift • Made of steel • Discharge port with drain plug • Equipped with a tilting mechanism The unit is robust, efficient, and ready for operation.

Condition: excellent (used), Complete production line for sale for manufacturing round metal rainwater drainage systems. Production starts from a sheet metal coil, then forms, stamps, and packages the products. All machines are in very good condition. The equipment is fully assembled and intended for mass production of: - Gutters - Gutter ends - Connectors - Corners - Brackets Isdpfx Ajy I Tq Som Debc - Downpipe outlets - Elbows - Downpipes - Branch connectors (Tees) - Packaging If you are interested in the offered equipment, have any questions, or would like to receive more detailed information, please do not hesitate to contact us. We will gladly provide the full equipment list, technical specifications, additional photos, or arrange an inspection of the production line. All equipment is connected and can be inspected in operation to see the full production process.

Condition: good (used), Year of construction: 2016, functionality: fully functional, WJS Waterjet T-Model Advanced Machine system: T-Model NCT 30 Flying Bridge, 3 x 2 m cutting table Ibjdpoy Epb Njfx Am Dsc High-pressure pump: BFT Ecotron 4037, 50HP / 4000 BAR Cutting tool: WJS-Basic cutting head Abrasive disposal system: WJS-Standard