Weidemann 3006 for sale
Identified location: Ashburn (US) (Edit)
|
6
Kaiserslautern, Germany
dealership location
6526 km
2006
ready for operation (used)
General Data Measurements width 3750 mm Measurements depth 2350 mm Measurements height 1650 mm Machine weight 5550 kg Control Unit Bevaa7px8a Brand Durma Model ENC 100 Max Material Thickness Steel 6 mm Media Main electronic connection 400 V / 50 Hz Power consumption 11 kVA This Durma ES 3006 Shearing Machine was made in 2006 in Turkey and has been working for approximately 10000 hours. It is equipped with a Durma ENC 100 Control unit. It has a shearing length of 3000 mm. Application Types ... more
|
|
4
Vellberg, Germany
6682 km
2006
unexamined (used)
DOUBLE SUPPORT CFHNECKE 2 x 30cm DURCHMESSER 625cm long. DRIVE MOTOR AND AGAINST SINS MUST BE !!!!! € 3,100.--+ VAT Bdlspiwowg more
|
|
5
Wiener Neudorf, Austria
dealership location
7152 km
2017
ready for operation (used)
Sheet strength 6 mm Cut length 3200 mm Delivery time prompt, interim sale reserved Special price € 14,800 ((instead of €18,500) Sheet strength: 6 mm Cut length: 3,200 mm Cut angle: 1.5 ° Exoffload in the side stand: 240 mm Backstroke: Motorized 1,000 mm Side stroke: 1,000 mm Engine power: 7.5 kW Oil filling: 240 lt. (Oil not included) Length: 3,900 mm Width: 2,050 mm Height: 2,100 mm Weight: 6,600 kg Vibral output pre-election control NC-10 for rear connection position motor rear attack on spher... more
|
|
6
Maximum cutting length: 3080 mm Zrsc3wtj Maximum cutting thickness of the sheet metal: 6 mm Maximum cutting angle: 2 st Total power demand: 11 kW Back gauge: 1000 mm Machine height: 1950 mm Machine length: 4100 mm Machine width: 2050/3650 mm Machine weight: 7980 t more
|
|
7
Twist, Germany
dealership location
6335 km
2019
ready for operation (used)
Commission 95432-22 Be9tsidpzk Capacity 2200 kg Drive type diesel Mast type telescope Lifting height 5050 mm Height 1950 mm Free stroke 150 mm Forks 1200 mm technically new Newly Bereifung_vorne 15.5 x 55 x 18 air Rear tyres 15.5 x 55 x 18 air Optional 3rd valve, rear work lights, work lights front, heating, full cabin more
|
|
4
ARBURG 470S 1300-675 / hours of operation: 25,000 / In the perfect technical condition Year of construction: 2004 Injection unit: Screw diameter: 45 mm Shot weight: 240 g Injection pressure: 2500 bar Metering capacity: 286 cc Clamping unit: Clamping force: 130 t Tie bar distance: 470 x 470 mm Clamping plate sizes: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: EUROMAP Robot interface Hydraulic core pulling x 1 Injection... more
|
|
5
Leicestershire, United Kingdom
dealership location
5824 km
1997
ready for operation (used)
Serial No. 607697669 Back gauge power Rapid blade adjustment yes Work supports 2 @ 920 mm Squaring arms 1 @ 920 mm Input 415/3/50 15 kW Clamps 14 x hydraulic Read-out to back gauge metric Nmykl Actuated via wander type foot switch Length 12' 2" / 3.70m Width 7' / 2.13m Height 6' 4" / 1.93m Nett weight actual. 5,630 Kgs / 5.54 Tons more
|
|
6
Hessisch Lichtenau, Germany
dealership location
6567 km
2004
used
TRUMPF laser machine type HL 3006 D/6 Serial No. 0789670 / 01165. ID no.: 11-10-30-00/10 year of manufacture 2004 Laser power 3000 Watt Solid state laser machine, YAG laser, laser system Laser source of a laser welding system Wavelength 1064 bis 1700 nm (n m) LLKB connection connection to a LaserOptik -Laser lens not included Fh32mil Power supply 400 Volt, 50 Hz, 92 kVA Transport dimensions L x W x H approx. 3900 x 850 x 1700 mm Weight approx. 1.8 ton more
|
|
4
Remscheid, Germany
dealership location
6411 km
ready for operation (used)
AEG DAU 085 300686 electronic module, used, normal wear, 100% functional, included with com. photos Bfccl0qbfx more
|
|
4
300To dppel stand eccentric press: crank press- grating press • Built in 1971 • NEW control since 2008 Bfk89nm2ax • Manufacturer Wilkins & Michell S2-300-60-38 • Pressing force 300To • Press table 1524x914 • Fixed stroke: 203mm • Lower dead point: 228 - 380mm • Height: approx. 5.5m + underfloor ?? • Renewal of all bronze bushings in 2010 • a rework on the pleul may be required • Power approx. 23kW • Compressed air consumption: 7.5m3/h • Weight approx. 36To (?) must be checked ... more
|
|
|
|
4
ARBURG 420C 1300-675 + Handling Built: 3-2001 Bq08syym Engine hours: 62,555 hrs Injection unit: 45 mm Special features: integrated handling with integrated conveyor belt. Comment: However, the machine is still running with a sep. Oil cooler, as there is a valve defective that still needs to be repaired more
|
|
7
Built in 1990 Size max 420 x 305 x 60 mm min 140 x 100 x 3 mm Book block thickness max 60 mm min 3 mm Cover size max 642 mm min 203 mm Speed max 6.000 c/h Equipment gathering machine • 18 stations • 18 feeders 272 • connected with perfect binder Bflamd7g7n • 20 clamps • infeed chanel with jogger • jogging station • resting table • fold pressing station • milling and roughening station • hot melt spine gluing unit • hot melt side gluing unit • premelter • pile cover feed... more
|
|
7
Leicestershire, United Kingdom
dealership location
5824 km
1996
ready for operation (used)
Serial No. 3602 Capacity 3000mm x 6mm Back gauge Power Rapid blade adjustment Yes Shadow-line Yes Work supports 2 @ 1500mm Squaring arms 1 @ 1000mm Input 415/3/50 ac 11 kW approx Be0s7lixwi Clamps 14 x hydraulic Read-out to back gauge Metric Actuated via Wander type foot switch Fitted with Finger Guard Length 12'6" / 3.81m Width 6'6" / 1.98m Height 5'6" / 1.68m Nett weight actual. 7 Tons / 7100 Kgs more
|
|
8
Working area 6.100 mm Operating hours 0 Stroke max 250 mm Bnebn7yn Control type 0 Hole no mm Throat 630 mm Pressure force 300 t Folding length 6.100 mm Axes Distance between uprights 5.100 mm Working speed 8 mm/seg Power: installed max 18 kW Dimensions (long x wide x high) 7.000 x 2.180 x 3.540 mm Weight 35.000 kg more
|
|
1
Würzburg, Germany
6654 km
2007
good (used)
Gebhardt roller curve 2 x 90° with straight unit 610-550 IR850 + 300-610-550 type 314.01 RA1045 The Gebhardt roller curves are from 2007 and in a very good (used) condition and are powered by an engine of the brand SEW. Columns are not included in the scope of delivery. These are optionally available. Technical data: Bwlcz9pl Manufacturer: Gebhardt Type: 314.01 Position: GE 11.00 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 2 x 90° Nominal/outer wi... more
|
|
6
Amberg, Germany
dealership location
6791 km
2013
used
Please see the english translation below - We are happy to offer you a teleloader Weidemann 4270 CX 100 T. - The machine has a capacity of over:weight: 7,200 kg, capacity: 74.5 kW, long: 6,315 mm, width: 1,990 mm, height: 2,690 mm, year of construction: 2013 , Loading height: 4,740 mm, operating hours: approx. 3,950 h, equipment: quick changer, accessories: shovel and fork, ready to use immediately - Contact If you have any further questions, please contact Maria Obermeier on 09621 [...] Content... more
|
|
3
sheet width 3050 mm thickness at "Niro-steel" 3,0 mm plate thickness 6,0 mm down holder 18 Stück no. of strokes 9 / 17 Hub/min cutting angle 0,5 - 3,0 ° oil volume 100 ltr. back stop - adjustable 750 mm engine output 7,5 kW Bfjlvtpjqs work height max. 770 mm weight 4,5 to. range L-W-H 3.750 x 2.400 x 1.575 mm more
|
|
5
Wiener Neudorf, Austria
dealership location
7152 km
1999
ready for operation (used)
Sheet thickness 6 mm Cutting length 3100 mm Delivery time prompt, intermediate sale reserved Sheet thickness: 6 mm Cutting length: 3,100 mm Cutting angle: 1°30 Extension: 230 mm Rear stop motorized: 1,000 mm range Engine power: 15 kW Length: 3,700 mm Width: 2.850 mm Kspyy8lz Height: 1,950 mm Stroke capacity: 15/min Weight: 6.150 kg Swing cutting versionMotoric rear stop with ball-circuit spindlesDigital display and handwheel for fine adjustmentballs in the tableManual cutting gap adjustmentCut ... more
|
|
9
Leicestershire, United Kingdom
dealership location
5824 km
1989
ready for operation (used)
Serial No. 802398 Capacity 3050 X 6mm. Back gauge Powered Rapid blade adjustment Yes Variable rake Yes Work supports 2 @ 900mm Squaring arms 1 @ 1000mm Input 380/3/50hz Clamps 18 hydraulic Read-out to back gauge Metric Actuated via Wander type footswitch Fitted with Finger guard Equipment Spare blades Length 3700mm Fwz3k0n Width 1700mm Height 1600mm Nett weight actual. 4,530 Kgs. / 4.5 Tons. more
|
|
6
Malacky, Slovakia
7178 km
2013
as good as new (ex-display)
3019/5000 Hydraulic shears HSL (HSLX) - Features and standard equipment The machine is a very robust welded construction. The ram drive is supplied by two top rollers. so The thus freed clearance on the back of the machine allows the installation of additional handling equipment such Sheet feeder, stacker, thin plate carrier, side conveyor, and the like. All function controls are located in the left, integrated central control Side of the cabinet and rotated 45 ° to the operator. Standard ... more
|
|
1
Würzburg, Germany
6654 km
2007
good (used)
Gebhardt roller curve 90° with straight unit 610-550 IR850 + 300-610-550 Type 314.01 RA1043 The Gebhardt roller curve is from 2007 and in a very good (used) condition. It has an engine of the brand SEW. Columns are not included in the scope of delivery. These are optionally available. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: GE 14.15 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 90° Nominal/outer width (NB): 610mm Usable width (... more
|
|
6
CNC machining centre BUSELLATO JET 3006 Working dimension X: 3.050 Working dimension Y: 1.260 Working dimension Z: 150 Number of routing spindles: 1 Main motor power kW: 9,2 Gvwsag Rotation speed max rpm: 18.000 Torque support: Yes Tool clamping system: ISO 30 Tool changing positions: 10 Number of exchangeable units: 2 Vertical drilling spindles: 12 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Saw aggregate: in X-direction Lock recess milling aggregate: permanently ... more
|
|
5
sheet width 3050 mm plate thickness 6,0 mm down holder 18 Stück thickness at "Niro-steel" 3,0 mm no. of strokes 9 / 17 Hub/min cutting angle 0,5 - 3,0 ° Yr20b8 oil volume 100 ltr. back stop - adjustable 750 mm table height 770 mm weight 4,5 to. range L-W-H 3.750 x 2.400 x 1.575 mm more
|
|
0
Max. length of plate 3050 mm Max. plate thickness 6 mm Equipped with: Motorized back gauge Noegn Adjustment of blade gap clearance Adjustable cutting angle Angle plate Foot contact Service tools etc. more
|
|
5
sheet width 3050 mm plate thickness 6 mm distance between columns 3050 mm cutting angle 1 - 3 Grad no. of strokes bei 1° = 13 per Min. back stop - adjustable 1000 mm hydraulic motor 7,5 kW control Blemas Control thickness at "Niro-steel" 3 mm weight of the machine ca. 5400 kg dimensions of the machine ca. 3,9 x 2,1 x 2 m Electric 380 Volt Motorized back gauge Foot pedal Side stop Shadow line lighting cutting split adjustment Cutting lenght bound Unused hydraulic guillotine (exh... more
|
|
2
Manufacturer: Dannfoss, Ersatzteil aus Maschine: Frequenzumrichter, Type: VTL 3006 175H7264, Menge: 3, Kw output: 7,2 / 9,2 kVA, FREITEXT1: 10/13 A, H2y0yesmi more
|
|
1
Würzburg, Germany
6655 km
2007
good (used)
RA1040 Data sheet Retrofit Pos. GE 10.20 Gebhardt roller curve 2 x 90° with tanning tumour EL=550 Type: Gebhardt Roller Curve Type 314.01 Built: 2007 Number of mandate: 070 113/2007 Ab. Weight load: 30 kg Foerder angle: 2 x 90° Outer radius: Ra = Ri+FB = 850 + 550 = 1400 mm Inner radius: Ri = 850 mm Foer width: FB = 550 mm Nominal width NB = FB+60 = 610 mm Geradstueck: Length = 300 mm Bfiny8q8ei Foerder speed: v = 0.35 m/s Rolls: Type: G6/50 sliding bea... more
|
|
8
Pressure: 300 t Bending length: 6050 mm Control: CYBELEC ModEva 10s Total power consumption: 38 kW Machine weight approximately 33000 kg Facilities: Bek3yhsevj Facilities: -controlled axes: Y1 - Y2 - X - R -Bending help front left -Bending help front right -motor die shift M1 and M2 -hydraulic top tool clamping -pneumatic die clamping -EHT stamps - default -EHT multi die - standard -Laser safe before the machine -Under floor machine more
|
|
5
Description: System disconnector type BA300 System-separating spheroidal casting with return flow preventer on and off the side, 3 ball valves, drain valve Flanges according to DIN EN 1092-2 for the protection of drinking water systems against re-press, backflow and back-sucking, for residential buildings, industrial and commercial purposes, installation position horizontally with drain valve downwards, drain quantity in case of an accident: 35 m3/h, 3 ball valves for connecting a Differential p... more
|
|
6
sheet width 3050 mm plate thickness 6,0 mm distance between columns 3100 mm cutting angle 0,5 - 3,0 ° Bfed7kdmzv down holder 18 Stück no. of strokes 9 / 14 Hub/min weight ca. 4.800 kg more
|
|
4
Boschert Table Scissors G-CUT 3006 6mm steel 4mm V2A Cutting length 3100mm Rear stop 1000mm High bracket 3 steps RTS Sheet Metal Return Brush tables at the front Bfa3clndfh Angular stop 1500mm Front stop Digital Plastic off-holder protection Machine in very good little used condition more
|
|
3
CNC Control Schneider 3-position rear sheet support with pneumatic rollers rear sheet support extended on 1000mm ATM: automatic thickness measurement RTF: return to front NSC: narrow stripe cutting Front Potection with Light Curtain Movable Front Support Squaring arm linear scales 2000mm Front support with linear scales and T-slots 1000mm Laser Indication of the Cutting Line Synthetic cups for hold down Umcg8q99 Color: blue RAL 5017 (picture showing similar model) more
|
|
6
Manufacturer: Hebrock Type: AKV 3006 DK/F Machines No.: 2499 Year of construction: 2013 Specifications: Operating voltage: 400V Protection for: 30.5 A Glue height max: 50mm Thickness roll material max: 3mm Workpiece length min: 200mm Workpiece width min: 90mm Feed: 10m/min glue system Granules : Glue basin (incl. alternating glue basin) Joining milling unit : Yes (up to 60mm possible) Crosscut saw unit : Yes flush milling: yes Radius milling: yes 2mm corner copy unit : 1 motor R2 Radius drawing ... more
|
|
6
Sutton, United Kingdom
5923 km
2013
excellent (used)
2 DR 2 milling station Pneumatic package Option of an exchangeable glue pot PUR glue Glue outlet Pre-cutters up to 45 or 60 mm Machining up to 60 mm Ball R1 cutters Crpmmej R2 cutters Profile R2 Making corners R1, R2 Glycine Polisher Spraying on the edge of the form SPS touch screen more
|
|
4
Wiefelstede, Germany
dealership location
6377 km
used
Rubberized roller motor, belt motor pulley for conveyor belt-Trommel -Trommel ø 168 mm power 0,37 kW speed 0,20 m/sec, shaftends Ø mm recording 4kant 25 mm Drum length 455 mm protection class IP65 -1 x engines available Award pieces Dimensions of 168 x 570 mm Weight 34 kg 2pwege more
|
|
5
gebr. Hydr. Plate shear, Fabr. Megobal, type GH 3006/1, 1993 Z30wimmd 1000mm Backgauge Plate high clamp, pneumatic Adjustable cutting angle Accessories: Replacement blade set documentation is available. (The seals in the master cylinders were restored five years ago.) more
|
|
4
Postfach 2722, 58477 Lüdenscheid, DE
6436 km
1993
good (used)
- motorised back stop collar: max. 750 mm - front stop collar: max. 1000 mm - motorised cutting angle adjustment: 0,5 - 3° - sheet width: 3005 mm - sheet height: 6,5 mm Bbl8a7fdna - power consumption: 7,5 kW - weight: ca. 4600 Kg - dimensions LxWxH: ca. 3600 x 1600 x 1500 mm more
|
|
3
Table Shears: Cutting length 3100 mm Sheet metal thickness MS (450 N/mm2) 6 mm SS (700N/mm2) thickness 4 mm Stroke per min. 15 1/min Cutting angle 1 ° 30' Number of holders of 16 St. Maximum clamp capacity 14 t Back gauge 1000 mm Backgauge speed 200 mm / sec Motor output 15kW Oil tank size 200 l RADIUS 50 mm Support arms 2pcs Support arm with lateral Guide Table height 865 mm O28ta3eb Table width 500 mm Table length 3515 mm Machine length 4110 mm Machine width 2200 mm Total ... more
|
|
6
Article number: MA1025 Manufacturer: Trumpf Type: HL 3006D Year of construction: 2004 Machine number: 20-01-23-00 Length [mm]: 3900 Width [mm]: 850 Height [mm]: 1700 Weight [kg]: 2200 Power supply: 380V / 92 KVA Vrzbvm Laser power [Watts]: 3000 Coolant system: KLH - L130. HL 12 / bGewicht CA. 800KG / 88 AP / year 2004 / B 3400mm X T 1070mm X H2100mm Accessories: manual / schematics more
|
|
3
Borken/Burlo, Germany
dealership location
6352 km
used
Manufacturer: Siemens Series: Sinumerik type: MS300 6FX1113-4A T2vx0wghs Item condition: used more
|
|
4
Wiefelstede, Germany
dealership location
6377 km
used
Pneumatic cylinder, pneumatic cylinders, pneumatic stamp, air stamp Stroke 160 mm Piston diameter 63 mm Piston rod 20 mm (connection M 16 x 1, 5 thread) -Gesamtlänge 356 mm Extended-Gesamtlänge 516 mm Nhkynrlp -Luftein-and adjustable output -6 x available Price per piece Weight 3,6 kg more
|
|
2
gebr. Hydr. Plate shear, make of Blemas, type HS-3006 Bejhgjybvs Built in 1993 Power 3000 x 6 mm with back gauge Weight about 6 tons. more
|
|
6
Borken, Germany
dealership location
6360 km
good (used)
Here we offer a vacuum drying Cabinet PINK. Vacuum drying oven PINK Space required for operation and maintenance Width min. 3000 mm Height min. 2500 mm Depth min. 2500 mm Dimensions VT 8cgh0mhw7 External dimensions: Width approx. 1170 mm depth approx. 1380 mm height 1615 mm Total height 1970 mm Internal dimensions: Width approx. 360 mm depth approx. 735 mm height approx. 300 mm Vacuum chamber volume 79 litres Operating temperature of min. 20 ° C 150 ° C Electrical connection power... more
|
|
7
Bewd89zgst Splitted Band Dimensions see picture/drawing Height cleats 15 mm Division cleats 300 mm Weight: 250 kg more
|
|
10
Category of technical means: construction machine Type of technical means: Telescopic loader Manufacturer: WEIDEMANN Model: T5522 TL48 Production year: 2016 Bej8jm3cdc Own weight: 4200 kg Engine power: 44.7 kW Lifting height: 5.5 m Capacity: 2200 kg Equipment: - 4x4 drive - heating - air conditioning - load meter - work lighting - rear coupling - main power switch - joystick with integrated travel switch. more
|
|
5
Hydraulic CNC - table shears Fabr. BLEMAS type TK 3006 Fabr.# 121600/9502039, year 1995 Technical data: Cutting length 3050 mm Max cutting thickness 6.5 mm maximum pressure 195 bar Cutting angle adjustment 0.5-3 ° Number of holders 18 pieces Speed adjusting cutting angle min/max 10 / 21 H / min. Length 1000 mm front gauge Zlql7mb9 Working height 900 mm Pump motor 7,5 kW External dimensions approx. 3815 x 1560 x 1685 mm Weight 4600 kg with -controlled rear gauge 750 mm with dig.... more
|
|
4
Plate shear old TIC SST 3006 Maschnr. 25 Year of construction 1997 Cutting length 3000 mm Bdjvf9moer more
|
|
11
Built in 1992 Size max 420 x 305 x 60 mm min 200 x 240 x 4 mm Speed max 6.000 c/h Equipment gathering machine • 12 feeders 1531 intermediate elements • spiral race away perfect binder • 18 clamps • milling and roughening station • hot melt spine gluing unit • hot melt side gluing unit • premelter • pile cover feeder • cover nipping and pressing station • pile delivery optionales Equipment:--not included-- • extending of the gathering machine Gmdqsdfce • modification of the c... more
|
|
5
Rosenfeld-Leidringen, Germany
dealership location
6646 km
used
Nutrunner control unit Bosch SE 50 F9v7zfd Item condition: used / very good In stock: 6 pieces Available: immediately from stock Warranty: 1 year 220 V 0.3 A more
|
|
|
