Used Weiler 260 for sale (182)

Condition: good (used), used -- 6-fold changer for WEILER , type 260 Gujdpfxsxdixno Ab Ujk

Condition: reconditioned (used), Year of construction: 1977, Engine Lathe Brand: WEILER Model: MDU 260 Year of manufacture: 1977 – workshop tested Machine no.: 14942 Centre height: 125 mm Spindle bore: 28 mm Accessories: - Electrically operated chuck guard - 3-jaw chuck Ø 140 mm incl. set of turning jaws incl. set of boring jaws - 4-jaw chuck Ø 140 mm incl. set of turning jaws incl. set of boring jaws Gedpfxsxv A I Ts Ab Uouk - Safety chuck key - Manual clamping device - Collet set W28 (366E) - Set (25 pcs.) collets W28 (366E) from 1.0-25.0 mm in 1.0 mm steps - Fixed centre for headstock W28 (366E) - Quick-change toolholder Body size A - Operating manual Used as seen, without warranty The machine is technically in accordance with the state of the art of its year of manufacture.

Year of construction: 1977, condition: ready for operation (used), A Weiler precision lathe, overhauled by Mammut in 2004, is available. Center height: 125mm, max. swing over bed/cross slide: 260mm/140mm, distance between centers: 500mm, spindle bore: 28mm, clamping range: 1mm-26mm, drilling diameter: 22mm, cutting edge height: 22mm, tailstock quill diameter: 80mm, tailstock quill travel: 80mm, tailstock offset: 450mm. Documentation available. An on-site inspection is possible. Gjdsxqqmtopfx Ab Ujuk

Condition: used, Technical data : Center width approx. 500 mm Center height above bed 125 mm 16 speeds from 125 - 2800 rpm Space requirement, length x width 1.2 x 0.6 m Estimated weight approx. 450 kg . Scope of delivery : Gedpfsxq E Dmjx Ab Uouk Hand lever quick clamping device Electrical monitoring of whether the part clamping lever is in the open or clamped position 1 set of collets from 3.0 - 25.0 mm, increasing by 1 mm Cross support with two tool holders Turret with 6 tool holders .

Condition: used, Year of construction: 1970, Weiler lathe with tailstock Gusdohtnu Topfx Ab Ujk

Condition: used, turning diameter over bed 260 mm turning diameter over slide rest 140 mm turning length 500 mm centre height 125 mm bed width 160 mm spindle turning speed range 16: 110-3600 U/min spindle bore 28 mm Gjdpfovtthiox Ab Ueuk face slide travel 120 mm upper slide-adjustment 120 mm tailstock quill taper MT 2 tailstock quill adjustment 80 mm drive motor 0,37 / 0,88 kW weight of the machine ca. 350 kg dimensions of the machine ca. 1,3 x 0,6 x 1,2 m Mechanic's lathe with manual feed and spindle support, drive via V-belt and stepped pulleys as well as 2-pole motor, hardened, finely ground work spindle, support adjustment over the entire bed length using eccentric clamping lever, three-jaw chuck, collet device with pliers, crank tailstock, cast base. Machine dealer with own stock of 1600 m².

Condition: good (used), WEILER DA 260x1000 Gap Bed & Leadscrew Lathe - 3-axis digital readout (new) - Centre height: 260 mm - Swing over bed: 535 mm - Swing over cross slide: 345 mm - Distance between centres: 1000 mm - Spindle bore: 71 mm - Speed range: 33 - 1500 rpm - Automatic longitudinal and cross feeds - Thread cutting: metric / inch / diametral etc. - Tailstock: MT 4 - Motor power: 7.5 kW Gjdpfexyugcjx Ab Ueuk - Chuck nut (new) - Multifix toolpost base with insert - 3-jaw chuck: 350 mm - 2x emergency stop - Electric chuck guard (new) - Chip guard (rear) - Coolant system - Drill chuck / live centre - Documentation Dimensions (LxWxH): 2.7 x 1.5 x 1.7 meters / weight: 1700 kg Errors and omissions excepted.

Year of construction: 1973, condition: excellent (used), turning length 125 mm Gusdjxpxqwjpfx Ab Uok weight of the machine ca. 0,4 t

Condition: good (used), functionality: fully functional, 1x Weiler MDU 260, in good condition. Hand lever carriage, hand lever tailstock, collets. Gusdpfx Aexw Ea Ujb Uok 1x Feinbau PM1, many collets available for spindle and tailstock, hand lever tailstock.

Condition: excellent (used), functionality: fully functional, Provisur Weiler 878 grinder, 50hp model. Greta machine for burger, sausage, Petfood manufacturer. Can mince fresh or frozen flaked meat. Extended hopper. Gsdpfex Av Rusx Ab Ujuk

Condition: used, total length: 1,500 mm, total width: 750 mm, total height: 1,350 mm, Empty weight: 700 kg - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 150 - Swing over bed [mm]: 300 - Carriage turning diameter [mm]: 160 - Distance between centres [mm]: 500 Godpfx Abjx D Tlre Ujuk - Bed width [mm]: 210 - Spindle bore [mm]: 36 - Min. spindle speed [rpm]: 15 - Max. spindle speed [rpm]: 3550 - Transport dimensions: 1500mm x 750mm x 1350mm (l x w x h) - Transport weight [kg]: 700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2010, condition: like new (used), We have the following accessories for Weiler E30 lathe. 1.piece .faceplate Schunk 250mm price:600,-€ Spindle head DIN 55027 size 5 2.pieces.faceplate Röhm 260mm price each 1.piece:650,-€ Gujdpfxjgabvno Ab Uek spindle head DIN 55027 size 5 1.piece.travelling steady rest Price: 450,-€ 2.pieces.driving flange Price per. 1 piece: 210,-€ Spindle head DIN 55027 size 5 All parts are in very good condition.

Condition: good (used), Year of construction: 1988, 1 used lead and feed screw lathe Make: Weiler Model: 160 B Year of manufacture: 1988 Technical specifications Centre distance: 650 mm Swing over bed: 320 mm Swing over cross slide: 192 mm Gusdpow Sdr Hsfx Ab Uok Centre height: 160 mm Spindle bore: 40 mm Rated power: 2.4 / 3 kW Spindle speeds: 48 – 2500 rpm Dimensions: approx. L 2.20 x W 1.10 x H 1.40 m Weight: approx. 1 t Equipment Heidenhain digital readout Multifix toolholder with various inserts 3-jaw chuck Emergency stop

Condition: good (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 180 mm, spindle bore: 40 mm, turning diameter: 330 mm, turning diameter over bed slide: 330 mm, center height: 165 mm, turning length: 750 mm, quill stroke: 110 mm, rotational speed (max.): 2,800 rpm, rotational speed (min.): 22 rpm, power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, Weiler Condor AC stepless rotary machine Guedpfxsruqzco Ab Uok

Year of construction: 2006, operating hours: 64,831 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model SINUMERIK 840 D Main Drive Spindle bore 165 mm Workpiece Workpiece drm over bed 1200 mm Workpiece weight 6000 kg Tail Stock Pinol diameter 140 mm Pinol way 300 mm Pinol tool taper MT 6 This Weiler E120x2000 was manufactured in 2006. It features a robust 400 V operating system, a power rating of 55 kVA, and can handle workpieces up to 6000 kg. With a maximum swing over bed of 1200 mm and a center distance of 2000 mm, it's ideal for large-scale turning tasks. Includes a chip conveyor and three-jaw chuck. Contact us for more information about this machine. Guodsx D Hd Uopfx Ab Ujk Application Types Turning

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C from Technical College Inventory Technical Data: - Year of manufacture: 1992, Machine No. 92 160 3273 - Center height: 160 mm - Center distance: 650 mm - Spindle speeds: from 24 to 2500 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock Morse taper 3 - Feeds from 0.02 to 0.63 mm/rev - Thread cutting options: metric, inch, module, and diametral pitch - Metric thread pitches from 0.25 to 8 mm Gsdex Eb D Eepfx Ab Ueuk - Weight approx. 680 kg - Spindle brake can be engaged - Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and Features: - 3-axis DRO by K&C with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction reversal, - Collet chuck with NEW collets from 3 to 26 mm in 1 mm increments - 160 mm three-jaw chuck (with 1 set of jaws) - Quick-change tool post with 4 tool holders - Bed stop - Electronic spindle guard - Rear splash guard - Coolant system - Operating manual, spare parts diagram About the Machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe with toolroom accuracy, year 1992, in very good condition. The machine is, of course, fully functional. All carriage slides move very smoothly and evenly. The Weiler also runs quietly at high speeds. This newer generation of Weiler lathes is very user-friendly and allows for finishes similar to grinding. Take the opportunity to inspect this machine under power at our premises and see the condition for yourself. Immediately available.

Condition: used, total length: 2,320 mm, total width: 1,400 mm, total height: 1,600 mm, Empty weight: 1.600 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 4.0 - Centre height [mm]: 190 - Swing over bed [mm]: 380 - Distance between centres [mm]: 1000 - Spindle bore [mm]: 56 - Min. spindle speed [rpm]: 63 - Max. spindle speed [rpm]: 2000 - Transport dimensions: 2320mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 1600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gujdpfew A H Tcsx Ab Uok Lukas van Rossum

Condition: excellent (used), Year of construction: 2006, CNC cycle lathe WEILER E 50, year 2006 WEILER cycle control D3 Chuck 250 mm SCHUNK ROTA-S 250-62 Parat tool holder size 3 with 4 tool pockets Swing diameter over bed: 570 mm Swing diameter over cross slide: 340 mm Spindle bore: 83 mm Centre distance: 1000 mm Turning length: 1100 mm Spindle speeds: 1-2500 rpm / Motor: 20 kW Gsdpfexd Diusx Ab Ujuk For all further details, refer to the data sheets. Machine documentation and data backups available, machine under power and ready for demonstration.

Condition: used, Year of construction: 2000, used CONDOR AC, partially overhauled Godex E Um Nopfx Ab Uouk Centre height: 165 mm Between centres: 750 mm Spindle bore: 40 mm Spindle speeds: 22–2,800 rpm, infinitely variable - Quick-change tool post size B - WEILER DZ-V digital readout - Hollow spindle stop - Fixed steady rest - 7 Multifix tool holders - Flat splash guard - Electrically interlocked chuck guard - Change gears and various soft jaws The machine is partially overhauled: - Bed slide: guideways re-coated and hand-scraped, gibs and lower guide strips adjusted - Cross slide measured and aligned on bed slide; cross slide dovetail guide newly scraped, gibs adjusted and scraped - Top slide newly scraped and gib matched - All measuring scales overhauled and cables replaced The machine is located in our showroom at 71334 Waiblingen-Beinstein and is immediately available. For details on equipment, please contact us.

Condition: ready for operation (used), Year of construction: 1966, Immediately available from location: L & Z Lathe Weiler Year of manufacture approx. 1966 Gujdsx E Rtfspfx Ab Uok Centre height 140 mm Swing diameter 280 mm Over carriage 180 mm Turning length 800 mm Spindle bore 24 mm Spindle speeds up to 1600 rpm Drive power 2 kW Chuck diameter 140 mm Multifix tool holder with inserts Weight 1 ton Priced at EUR 1,500.— plus VAT ex location

Year of construction: 2005, operating hours: 20 h, condition: ready for operation (used), Control Unit Brand SIEMENS Main Drive Spindle speed range 1-4500 Spindle motor power 100% / 60% duty cycle: 7/9 kW Spindle bore 41 mm Tool taper Mk.5 Workpiece Workpiece drm over bed 330 mm Workpiece drm over support 160 mm Workpiece drm 160 mm Tail Stock Pinol diameter 50 mm Pinol way 130 mm Godpfx Ajx D I Nfeb Usuk Pinol tool taper Mk.3 Tools Type of tool holder Multifix Gr. B or Parat Gr. 2 This horizontal turning machine was manufactured in 2005. A Weiler C 30x750, it features a swing diameter over bed of 330mm and a spindle bore of 41mm. The main drive offers a power of 7/9 kW and a torque of 90Nm, with a speed range up to 4500 rpm. If you are looking to get high quality turning capabilities consider the Weiler C 30x750 machine we have for sale. Recently overhauled, it includes renewed bearings and guideways, ensuring high precision. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C from Vocational School Technical Data: >> Year of manufacture: 1992; Machine No. 92 160 3260 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch threads possible >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be engaged >> Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: >> 3-axis digital readout by K&C with manual Features: switching mm/inch, coordinate mode selection ABS/INC, halving of display value, reference mark, 200-tool programming, taper calculation, radius/diameter, quick zeroing, counting direction reversal >> Collet chuck with NEW collets from 3 to 26 mm (in 1 mm increments) >> 160 mm 3-jaw chuck (Kelistangen) with 1 set of jaws Godpfx Aex Eb A Uob Ujuk >> Quick-change toolpost with 4 steel holders >> Bed stop >> Electronic spindle guard >> Rear panel >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe, toolroom accuracy, year 1992, in very good condition. The machine is of course fully functional. The carriages all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces with ground finish quality. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Condition: excellent (used), Year of construction: 2020, Fixed steady rest for WEILER E 50 lathe in very good condition. Gedpfx Abetx Avke Usuk Clamping range : 10 -150 mm.

Year of construction: 2009, operating hours: 9 h, condition: ready for operation (used), Additional Equipment Tailstock spindle diameter: 100mm / Tailstock spindle travel: 200mm / Internal taper of the tailstock spindle: Mk.5 Gusdpfxex D Ry Hs Ab Ujk This horizontal turning machine was manufactured in 2009. A Weiler E 60x1000, it features a spindle bore of 83mm and a swing diameter over bed of 640mm. With a maximum torque of 1400Nm and a speed range up to 2500 rpm, it's ideal for robust turning operations. Recently overhauled, it includes renewed bearings and guideways, ensuring high precision. Consider the opportunity to buy this Weiler E 60x1000 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 2001, condition: ready for operation (used), General Data Machine weight 11500 kg Measurements height 2120 mm Control Unit Brand SIEMENS Model 810 D Dimensions Machine Length 5400 mm Main Drive Number of axis 2 Spindle motor power 45 kW Gjdjx D Hz Tspfx Ab Ueuk This Weiler E120x3000 was manufactured in 2001. It features a center distance of 3000 mm, center height of 600 mm, and a swing diameter over bed of 1200 mm. The spindle bore is 165 mm, and it offers a robust main drive with a power of 45/37 kW. Ideal for heavy-duty turning, this machine includes accessories like a lathe chuck, faceplate, and a steady rest. Contact us for more information about this machine. Application Types Turning