Used Weigh Out for sale (6,471)

Year of construction: 2011, operating hours: 50 h, condition: used, machine/vehicle number: 6151704890, Demonstration tool : Desoutter Angel Grinder KA26085B7V Free Speed : 8500 rpm Grinding wheel maximum : 7x3 in. / 8x7 / 8 spindle thread : 5/8-11 Dsdpfx Ajcpbf Ssbujun Power : 2.82 hp Weight : 5.9 Ib.

Year of construction: 2010, operating hours: 75 h, condition: good (used), machine/vehicle number: 6159326780, We are dissolving part of our demonstration tool inventory: Desoutter control CVIC II L4 Year of manufacture: 08/2010 Item no.: 6159326780 little used, fully functional without any additional accessories Suitable for the following Desoutter screwdrivers and screw spindles: - ECA (7 to 200 Nm) - ECD (7 to 120 Nm) - ECP (7 to 40 Nm) - ECFS (7 to 30 Nm) - ECP HT (30 to 4000 Nm) - MC (5 to 135 Nm) Number of screwing cycles saved in the control: 1 Number of possible phases in the screwing cycle: 15 Djdsvxux Hjpfx Abusun IO totalizer (999 IO results) Depending on the configuration, viewing result memory is 5000 to 20000 I/O interfaces: 24 volt inputs and outputs: 8/8 Serial RS232 interface Ethernet interface

Year of construction: 2016, operating hours: 3 h, condition: excellent (used), machine/vehicle number: 6159327080, We are dissolving part of our demonstration tool inventory: Desoutter extended control ESP2-A for SLBN low-voltage screwdrivers Year of manufacture: 09/2016 Article no.: 6159327080 little used, fully functional without additional accessories Suitable for the following Desoutter screwdrivers:# -SLBN003 -SLBN010 -SLBN012 Duedpov Ipnzefx Abujn -SLBN020 -SLBN030 -SLBN050 -SLBN090 -SLBN120 The ESP2A is designed to optimize the performance of Desoutter SLBN screwdrivers, reduce your energy consumption and offer up to five program settings and PLC integration, including remote start and tool activation. In addition to the OK/NIO and group IO reporting, the ESP2A offers a wide range of rundown options including pre-run reversal, slow start, tightening phase and post-run reversal. Benefits Two tools can be connected to one ESP2A, offering unmatched flexibility and reduced installation costs. Improved production integration and traceability functionality to improve your product quality. Compatible with over 15 tools for a standardized platform, faster readjustments and lower total cost of ownership. Five cycles with 3 possible phases each offer versatility no matter where your production is headed. Multiple preset tightening strategies to replace multiple tools with a single one for a quick return on investment. Available in both lever-start and push-start tools from 0.07 N.m to 12 N.m with a full range of accessories for all your tightening needs. Fully compatible with a range of accessories to optimize your tightening process and ensure continued quality. Other tools for industrial manufacturing and maintenance on request.

Year of construction: 2018, condition: new, machine/vehicle number: 6159327070, We are dissolving part of our demonstration tool inventory: Desoutter ESP1-HT PLUS control for SLBN low-voltage screwdrivers Year of manufacture: 04/2018 Article no.: 6159327070 used, fully functional without additional accessories Djdpfx Asv Iqfzebueun Suitable for the following Desoutter screwdrivers:# -SLBN090 -SLBN120 ESP1-HT PLUS The ESP1 control was developed to optimize the performance of Desoutter screwdrivers and offers two speed ranges while reducing energy consumption. Advantages: With 2 speed options, the ESP1 offers flexibility to optimize your screwing process and ensure lasting quality. Compatible with 100 V or 240 V inputs for a standardized platform, faster readjustments and lower total cost of ownership. Other tools for industrial manufacturing and maintenance on request.

Condition: ready for operation (used), Posco 500 Desoutter Easy Line Screwdriver Screwdriving System Year of manufacture: 2008 6 bar You are welcome to arrange a viewing appointment. We can also organize affordable shipping for you! You will receive an official invoice. For international customers, a net invoice can be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers as well. Djdpjxfzz Rofx Abueun The mentioned company names and trademarks are property of their respective owners and are used solely for identification and description of the products. Deviations from the technical specifications as well as errors in the item description may occur and are reserved.

Condition: good (used), Year of construction: 1991, max. planing width 520 mm max. planing height 200 mm Duodpfx Abjiwi Ezeuon 4 cutterblocks slotted table lips electr. height adjustment with trolley with knife setting gauge

Year of construction: 2011, condition: used, machine/vehicle number: 6151656900, Used Desoutter ERS12 electric screwdriver with integrated sensor with connection cable Dusdpfxovtf R Ae Abuen fully functional without any additional accessories Item.No.: 6151656900 suitable for Desoutter CVIR II - screw control Output: Hex 1/4F" Torque: Min.: 1.5 Nm Max.: 12 Nm Idle speed: 950 rpm Weight: 0.7kg

Year of construction: 2011, condition: as good as new (ex-display), machine/vehicle number: 2011, From our demonstration tool inventory: Desoutter PT450-T3000-S19S impulse wrench with shut-off function The tool is fully functional and has been tested. Free speed: 3000 rpm Drive: 3/4" In. Torque: 166 till 332 ft.lb Length: 8.0 in. Weight: 9.5 lb Dujdpjcp It Dsfx Abusn

Year of construction: 2014, operating hours: 10 h, condition: as good as new (ex-display), machine/vehicle number: 6151656290, Desoutter Battery Angle Screwdriver shut off ELS15-480-A Demonstration tool Charger 230 V Ladegeraet + 2 Batterys (18 V 2,6 Ah) included Free speed: 200 to 480 rpm Torque Range: 44,2 in.lb till 133 in.lb Output drive: Sq. 3/8 Dodjcr H Eaopfx Abusun Length: 16,5 in. Weight (without Battery) : 2,6 lb.

Year of construction: 2014, operating hours: 2 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 6151654200, From our demonstration tool inventory, tested and fully functional: Desoutter E-Lit Premium elektric pistol screwdriver ELS6-1000P without battery with speed adjustment (via optional module) Idle speed: 300 to 1000 min-1 Dodpjv Ipcljfx Abuoun Torque range: 0.8 to 6 Nm / 7.1 - 53 in.lb Output: Hex 1/4" F Length: 215 mm Weight without battery: 0.8 kg Other tools for industrial production and maintenance on request.

Year of construction: 2011, operating hours: 7 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 6151659360, From our demonstration tool inventory, tested and fully functional: Desoutter low-voltage screwdriver SLB012-A2000-S4Q-NE shut-off with push start Idle speed: 1000 / 750 min-1 Torque range: 0.20 to 1.18 Nm / 1.76 to 10.4 in.lb Output: 1/4" Length: 245 mm Weight without battery: 0.83 kg Duodpfev Ipx Hex Abuon Other tools for industrial production and maintenance on request.

Year of construction: 2011, condition: used, machine/vehicle number: 6151653640, Used Desoutter ERAL2-60 angle screwdriver, electric controlled including motor cable compatible with Desoutter CVI 2 - screwdriving Drive : 3/8" Torque: Dodpocpbcvjfx Abueun working Torque : 5.9 till 33.0 ft.lb max Torque : 44.0 ft.lb net weight : 3.7 lb. Length: 17.4 in.

Year of construction: 2001, condition: like new (used), functionality: fully functional, machine/vehicle number: 1382434, From our demonstration tool inventory, tested and fully functional: new Desoutter D315-S-1050 compressed air 45° angle drill with trigger start Power: 280 W Torque: 10 Nm Idle speed: 1050 min-1 Length: 280 mm Weight: 0.84 kg Duedpfx Abjv Inwzsujn Other tools for industrial production and maintenance on request.

Year of construction: 2004, condition: like new (used), functionality: fully functional, machine/vehicle number: 1462064, From our demonstration tool inventory, tested and fully functional: Dusdpfx Abjv Inypousn new Desoutter F32-L-1200C compressed air 90° angle drill with lever start Collet: 4.8 mm Power: 375 W / 0.50 Hp Idle speed: 1200 min-1 Length: 285 mm Weight: 1.15 kg Other tools for industrial production and maintenance on request.

Year of construction: 2016, operating hours: 15 h, condition: good (used), functionality: fully functional, machine/vehicle number: 6151654220, From our demonstration tool inventory, tested and fully functional: Desoutter E-Lit Premium elektric pistol screwdriver ELS12-600P without battery with speed adjustment (via optional module) Duedjv Iphuspfx Abuon Idle speed: 250 to 570 min-1 Torque range: 3.0 to 12 Nm / 26.5 - 106 in.lb Output: Hex 1/4" F Length: 215 mm Weight without battery: 0.8 kg Other tools for industrial production and maintenance on request.

Year of construction: 2016, operating hours: 2 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 6151659480, From our demonstration tool inventory, tested and fully functional: Desoutter low-voltage screwdriver SLBN120-L550-S4Q switch-off with lever start Idle speed: 410 / 550 min-1 Torque range: 4.0 to 12 Nm Output: 1/4" Dusdpfxjv Ipt Rs Abuen Length: 301 mm Weight without battery: 1.25 kg Other tools for industrial production and maintenance on request.

Year of construction: 2011, condition: new, functionality: fully functional, machine/vehicle number: 2051474764, From our demonstration tool inventory, tested and fully functional: new Desoutter SH1200-LR215-S90-A13S pneumatic angle screwdriver with shut-off clutch with lever start Output: 1/2" square Dedpsv In Dbefx Abujun Torque: 70 to 120 Nm / 354 - 1062 in.lb Idle speed: 215 min-1 Length: 590 mm Head height (housing to square): 69.5 mm Weight: 3.5 kg Other tools for industrial production and maintenance on request.

Year of construction: 2014, operating hours: 7 h, condition: used, machine/vehicle number: 6151654560, Used Desoutter ECS4-M20 electric screwdriver with connection cable fully functional without any additional accessories Item.No.: 6151654560 suitable for Desoutter CVIC II - L2 and CVIC II - H2 - screw control Output: Hex 1/4F" Torque: Min.: 1.0 Nm Duodpfx Abevxu Dveuon Max.: 4.0 Nm Idle speed: 2000 rpm Weight: 0.6kg

Year of construction: 2017, operating hours: 3 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2051476364, From our demonstration tool inventory, tested and fully functional: Used Desoutter SDT035-T2200-R4Q pneumatic pistol screwdriver Dujdpfx Aov Imyuebuon with ratchet clutch with trigger start Output: Hex 1/4" Torque: 1.0 to 3.5 Nm / 8.9 - 31 in.lb Idle speed: 2200 min-1 Length: 212 mm Weight: 1.1 kg Other tools for industrial production and maintenance on request.

Condition: used, functionality: fully functional, Year of construction: 2009, machine/vehicle number: 1017, Used production line for blocks of concrete (and expanded clay). The line was used to produce concrete blocks using expanded clay. From 2023-08, the line is no longer in operation, it has been preserved. Line of blocks in order: - 2 pcs. small silos (with vibro, with pneumo flaps). - Raw material supply conveyor to the weighing hopper. Dujdsuc Tzvepfx Abuon - Weighing hopper. - Raw material supply conveyor from the weighing hopper to the mixer. - Mixer FK Machinery (Poland, 2022, bucket capacity 1200 l, engine power 18.5 kW). - Conveyor for feeding the mixture from the mixer to the SIGMA 1000 vibro press. - Vibro press SIGMA 1000: Type mark: PIERRE ET BERTRAND SIGMA 1000 with automatic TELEMECANIQUE control Manufacturer: ADLER S.A.S. Route de la Bourde, 60360 CREVECOEUR LE GRAND, France Serial no./year of manufacture/year of renovation - 1017/1989/2009 Area on the board (palette): 1130 mm x 550 mm (long x wide) Height of products - max 250 mm - Production shelf. - From the production shelf, the production is transported by autoloader to the mechanism where the production is automatically reloaded from the production boards onto the pallets. Production boards are automatically returned to the vibro press. - Control board with programmer. - Electric switchboard. 2022 year of production Mold 200 x 185 x 490 with which we have been working for the last year. There are many other used Moulds. There are about 500 pieces production boards. There is no compressed air compressor. We can provide disassembly, assembly and equipment startup services.

Condition: used, Year of construction: 2010, 5-axis machining center with nesting table Numerical Control with OSAI software Axis travel (X, Y, Z) mm 4950, 2050, 1000 Working range on X-axis mm 4250 Working range on Y axis mm 1560 Working range on Z axis mm 800 FT multifunctional nesting full-surface worktable No. 1 PRISMA 5-axis electrospindle, kW 12 (hp 16), 900 - 24000 rpm, rotation directions SX / DX Automatic tool changer with 12 positions, HSK-F 63 type cones * n 12 tools diameter 80 mm * n 6 tools diameter 160 mm * max tool diameter mm 250 * maximum weight per tool 4 kg * maximum weight in the warehouse 24 kg Drilling head with 9 spindles arranged as follows: - No. 5 vertical spindles; - No. 4 horizontal star spindles; * Distance between spindles mm 32 * rotation speed rpm 4000 * engine power kw 2.2 Protection and safety system with photocells and perimeter walls Automatic lubrication system Air conditioning system for the electrical panel No. 2 vacuum pumps, one of 250 m3/h Accessories and tools are sold separately Overall dimensions mm 7865 x 4200 x 4000 TECHNICAL DETAILS TO BE CHECKED Duedpowdvr Rjfx Abuon

Condition: new, functionality: fully functional, power: 102.97 kW (140.00 HP), fuel type: diesel, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), onboard computer, soot filter, traction control, PEUGEOT BOXER – KM0 – NEW TRILATERAL TIPPER BODY 2.2 engine – 140 HP – Euro 6 D-TEMP – Ready for immediate delivery Cruise control – Bluetooth radio Body dimensions 3150 x 2000 x 400 mm – Payload capacity 1,260 kg 24-month warranty Price: €28,800.00 + VAT + registration fees Vehicle not subject to financing or leasing restrictions. Djdpfx Absw Ighpousun Free delivery throughout Italy up to 500 km from our location. Free private shuttle service from Linate, Malpensa airports and train stations for vehicle viewing and test drives.

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 700 mm, workpiece length (max.): 2,900 mm, total height: 3,000 mm, total length: 5,000 mm, total width: 2,500 mm, table width: 1,400 mm, table height: 400 mm, table length: 1,800 mm, overall weight: 5,200 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 7,400 W, spindle nose: 4, number of spindles: 2, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, CNC machine with two tables and one head, that carries 2 spindles with two spinning tools in each. 4 tools in total. The tables and work independently to maximise speed, or in synchrony and work as one long table (2900mm) There is 6 clamps in total, which can be fitted to your liking. The calmps can handle 100x100mm Dujdpfexyh Dhox Abujn If working on two tables the part on each one can be 1400mm long. Also a removable vacuum table. with powerful vaccum pump. The machine is in working condition and is still operating at our factory. "TCAS" CAM Software comes with machine.

Condition: new, Year of construction: 2025, IF-100 moulder infeed (100 m/min). Max length 6m. The flat chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow correct operation of the infeed. Dujdpfx Aboxhfycjusn OF-100 moulder outfeed. Automatic deposit on a belt conveyor and cross infeed. Manual destacking Approx. floor space requirement: length 8m, width 2,5m . Suitable for max 100m/min feed speed.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 5,100 mm, travel distance Y-axis: 2,400 mm, workpiece height (max.): 300 mm, number of slots in tool magazine: 12, TECHNICAL DETAILS Working area Working area: 5,100 x 2,400 mm Workpiece thickness: 300 mm Spindle and tool changer Electric spindle: 1 x 10 HP HSK Tool magazine: 12 positions, daisy-shaped, on a Z-slide Drill head Vertical spindles (independent): 7 Prepared for horizontal spindle in X-direction: 1 independent spindle with double outlet (prepared) Djdswmczqjpfx Abusun Vacuum Vacuum pumps: 3 Performance per pump: 250 m³/h Unloading Unloading system: automatic with steel mesh belt EQUIPMENT - 10 HP HSK electric spindle - 12-position daisy-shaped tool magazine on a Z-slide - Drill head with 7 vertical spindles - Prepared for horizontal X-axis drilling spindle with Double outlet - 3 vacuum pumps, each with 250 m³/h - Automatic unloading system with steel mesh belt - CE safety standard