Used Weinig High Mech for sale (494)

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, saw drive: 15,000 W, power of the servo motor: 11,000 W, Machine completely overhauled / as new with new electrics new Siemens S7 control system Completion upon order Fpjdjv Diy Aopfx Apweg Crosscutting machine with chalk mark detection Wood cross-sections 430x30 / 300x150 / 200x200 DIMTER OptiCut 602 R Saw blade diameter 650/700 mm Feed speed 120 m/min Saw motor 15 kW SEW servo drive 11.00 kW with inverter electric thickness adjustment

Condition: used, Year of construction: 2006, functionality: limited functionality, machine/vehicle number: 106196, planing height: 200 mm, spindle diameter: 90 mm, planing width: 300 mm, spindle speed (max.): 8,000 rpm, height adjustment type: electric, compressed air connection: 8 bar, number of spindles: 5, For sale is a planing line by Weinig, complete with associated mechanisation from Kallfass (before and after the planer). The planing line is currently no longer in daily production. The operator side (left) first spindle and its mounting are defective. Weinig Moulder: Weinig Powermat 2000XL (year 2006) with 5 spindles (Weinig Powerlock system) plus chamfering unit. "Set-up time savings!" Spindle arrangement: bottom, right, left, top, bottom. The bottom and top spindles are both equipped with a jointing device. Spindle motor ratings: bottom 23.5 kW / right 15 kW / left 15 kW / top 28.5 kW / bottom 28.5 kW. Spindle speed: 8,000 rpm. The feed has a 15 kW drive motor, providing feeding speeds from 6 to 60 m/min. Compressed air requirement: nominal pressure 8 bar, operating pressure 6 bar. Workpiece dimensions for processing in the planing line: Shortest part: 2.00 m Fpjdpfjyzibmsx Apweg Longest part: 11.00 m (depending on mechanisation) Minimum thickness: 19 mm Maximum thickness: 200 mm Minimum width: 40 mm Maximum width: 300 mm Maximum profiling depth: 35 mm Feed rate: 6–60 m/min. Splitting is possible on the fifth lower spindle up to 60 mm height. Mechanisation: Kallfass "HmoK10000" year 2006 (operational/used) Before and after the planing line there is mechanisation by Kallfass. There is the option to buffer 2–3 packs before the unit, which must then be manually destacked before the infeed. Layer formation after the planer is performed by a paternoster unit with 3 adjustable walls. The maximum component length for this setup is 11.00 m. Price is quoted net ex works, without warranty. Complete disassembly is to be carried out by the buyer. A large inventory of cutterheads, spare parts, and various extraction components is available and can be purchased separately.

Condition: used, Year of construction: 2004, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm # 6726 Weinig Unicontrol 12 CNC ----- Sale on behalf of a customer. Machine connected and ready for demonstration. Including used window tools for Unicontrol 12, OERTLI for various wood thicknesses Fsdpfxoyyqm Is Apwepg ----- Brief Summary: ----- - 2 x tenoning spindles each 640 mm length, CNC controlled - "Vario-Table" - 3 x profile spindles each 400 mm length, CNC controlled - FItting spindle + grooving units (top and bottom) - Includes used window tools for Unicontrol 12, OERTLI programmed and set up for various wood thicknesses and systems (see pdf attached). Detailed Description: ----- crosscut saw ----- Crosscut saw electronically, horizontally infinitely adjustable Number of tools: 1 pc. Spindle speed: 3000-6000 rpm Spindle diameter: 40mm Tool diameter max.: 400 mm Motor power: 3 kW Laser guide light to identify the saw section rounding aggregate ----- Position: horizontally below Motor power: 1 kW Spindle diameter: 20mm Spindle speed: 9000 rpm Tool flight circle max.: 130 mm electronic length stop, length: 3500 mm ----- 1. tenoning Spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50mm Tool diameter max.: 380 mm Motor power: 15 kW 2. Tap and Slot Spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50mm Tool diameter max.: 380 mm Motor power: 15 kW 1. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50mm Tool flight circle max.: 232 mm Motor power: 11 kW 2. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50mm Tool flight circle max.: 232 mm Motor power: 11 kW 3. Profiling spindle ----- Position: horizontally above Tool clamping length: 40 mm Spindle speed: 9000 rpm Spindle diameter: 40mm Tool flight circle max.: 130 mm Motor power: 3.7 kW 4. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Hori...

Condition: excellent (used), CATALOG NUMBER 6950 TECHNICAL DATA - Max. working width: 220 mm - Max. working height: 130 mm – 4 spindles: 1) Bottom horizontal 220 mm, 5.5 kW 2) Right vertical 130 mm 3) Left vertical 130 mm; (2nd and 3rd spindle) 5.5 kW 4) Top horizontal 220 mm, 5.5 kW - 4 spindles with electric up/down adjustment - All spindles adjustable vertically and laterally - Spindle diameter: 40 mm - 4 powered, toothed feed rollers from above, including 1 double roller - 1 double rubber outfeed roller from above - Bottom rubber outfeed roller - Feed on Kardan shafts - Infinitely variable feed speed: 6–22 m/min - Feed motor: 2.2 kW - Lifting motor: 0.55 kW - Electric thickness adjustment - Infeed table length: 1970 mm - Central lubrication - Extraction port diameter: 3x120 mm, 140 mm - Fully enclosed cabin - Dimensions (LxWxH): 3350 x 1400 x 1400 mm, weight: 1700 kg – German production – Not repainted – Used planer in very good condition Net price: 33,900 PLN Net price: 8,070 EUR Fedpfsy At Uaex Apwjpg Net price calculated at an exchange rate of 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7706 TECHNICAL DATA - Maximum workpiece width: 220 mm - Maximum workpiece height: 120 mm – 5 spindles: 1) Bottom horizontal: 220 mm, 4 kW 2) Right vertical: 120 mm 3) Left vertical: 120 mm (spindles 2 and 3: 7.5 kW) 4) Top horizontal: 220 mm, 5.5 kW 5) Bottom horizontal: 220 mm, 4 kW - All spindles are adjustable up/down, right/left - Spindle diameter: 40 mm - Pneumatic pressure rollers - 4 top infeed geared rollers, including 1 twin - 1 top outfeed smooth rubber roller - 1 bottom outfeed rubber roller - Feed driven by Cardan shafts - Stepless feed speed adjustment: 6–36 m/min - Feed motor: 2.2 kW - Lifting motor: 0.25 kW - Equipped with brake - Electric planing thickness adjustment - Central table lubrication - Infeed table length: 1970 mm - Extraction port diameter: 4 x 120 mm, 140 mm - Dimensions (L x W x H): 3450 x 1600 x 1450 mm - Weight: 1112 kg Net price: 39,900 PLN Net price: 9,500 EUR (based on exchange rate of 4.2 EUR) Fodpfx Aoylazdopwjpg (Prices may change subject to significant fluctuations)

Condition: excellent (used), Catalogue number 7961 TECHNICAL DATA - Track width: 250mm - Shaft width: 250mm - Max. disc diameter: 350mm - Disc bore diameter: 70mm - Max. cutting height: 100mm - Table width with clearance: 940mm - Table length: 1700mm Top: – Pawls/kickers – Metal pressure roller, smooth – Shaft with saw blades – Metal pressure roller, smooth, 2 pcs Bottom: – Guide rail – Pawls/kickers – Smooth sliding roller – Track chain – Central lubrication – Feed motor 4kW Fpedpjyzzmuofx Apwog – Main motor 37kW – Stepless feed speed control – Manual body lift – Manual shaft lift (with saw blades) – Extraction port diameter: 200mm – Overall machine dimensions (LxWxH): 1800x1500x1700mm – Weight: 1956kg ADVANTAGES – German made – Stepless feed speed adjustment – Used multi-saw in very good condition Net price: 22900 PLN Net price: 5450 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with stronger fluctuations)

Condition: excellent (used), Catalogue No. 6747 TECHNICAL DATA - Maximum planing width: 170 mm - Maximum planing height: 130 mm 7 spindles: 1) Bottom horizontal spindle: 170 mm, 4 kW 2) Right vertical spindle: 130 mm, 5.5 kW 3) Left vertical spindle: 130 mm, 5.5 kW Fjdpfxeyz T Sco Apwspg 4) Additional right vertical spindle: 130 mm, 5.5 kW 5) Top horizontal spindle: 170 mm, 4 kW - 5th spindle with electric height adjustment 6) Additional bottom horizontal spindle: 170 mm, 5.5 kW 7) Universal spindle: 170 mm, adjustable up to 180°, 7.5 kW - Spindle diameter: 35 mm (all spindles) - All spindles adjustable vertically and horizontally - Top: 6 powered feed rollers (toothed), including 2 double rollers - Top: 4 outfeed rubber rollers - Pneumatically pressed rollers - Side pressure roller included - 2 guide rails in the table - Electrically adjustable planing thickness: 0.37 kW - Infeed table length: 2,480 mm - Stepless feed speed adjustment - Feed motor: 2.2 kW - Extraction port diameters: 1 x 135 mm, 5 x 120 mm - Dimensions (LxWxH): 5,550 x 1,900 x 1,660 mm - Weight: approx. 3,500 kg FEATURES – Made in Germany – Equipped with 7 cutterheads – Universal spindle – Used planer, in very good condition Net price: 27,900 PLN Net price: 6,640 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7670 TECHNICAL DATA - Track width: 340 mm - Roller width: 400 mm - Max. blade diameter for multi-blade saw: 350 mm - Blade bore diameter: 80 mm - Max. cutting height for edger: 100 mm - Max. cutting height for multi-blade saw: 120 mm - Table width with clearance: 900 mm - Table length: 1780 mm - From above: - Kickback fingers - Pressure roller, sliding, metal - Kickback fingers - Pressure roller, sliding Fodpeyk E Hpofx Apwopg - Saw shaft with blades - Pressure roller, sliding - Sliding pressure shaft, metal - From below: - Guide bar - Kickback fingers - Track - Central lubrication - Stepless feed speed adjustment - Electric lifting of saw shaft 0.75 kW + body 1.1 kW - Feed motor 1.5 kW - Main motor 22 kW - Floating saw movement 0.55 kW - Lasers (not working, require inspection) - Extraction port diameter: 210 mm - Overall dimensions (L/W/H): 2200 x 1450 x 2000 mm - Weight: 1925 kg ADVANTAGES – Made in Germany – Shaft with floating blade for edging – Additional sleeve for multi-blade saw included – Used multi-blade saw, in very good condition Net price: 58,900 PLN Net price: 14,030 EUR (based on exchange rate 4.2 EUR) (Prices may change with larger fluctuations)

Condition: excellent (used), CATALOG NO. 7133 TECHNICAL SPECIFICATIONS - Max. working width: 220 mm - Max. working height: 120 mm – 5 spindles: 1) Bottom horizontal, 220 mm, 5.5 kW 2) Right vertical, 120 mm 3) Left vertical, 120 mm; spindles 2 & 3: 11 kW 4) Top horizontal, 220 mm, 11 kW 5) Bottom horizontal, 220 mm, 5.5 kW - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - Pneumatic pressure hold-downs - Top: 4 powered, gear-driven feed rollers (including 2 double rollers) - Top: 1 double outfeed roller, smooth, rubber-coated Fsdpfx Apoyyy Ibowopg - Bottom: powered outfeed roller, rubber-coated - Feed on Cardan shafts - Variable feed speed adjustment - Feed motor: 2.2 kW - Lifting motor: 0.25 kW - Electric planing thickness adjustment - Infeed table length: 1970 mm - Central lubrication system - Extraction nozzle diameter: 4 x 120 mm, 1 x 140 mm - Dimensions (L/W/H): 3500 x 1550 x 1400 mm - Weight: 1750 kg ADVANTAGES – Equipped with 5 heads – German-manufactured – Not repainted – Used planer, in very good condition Net price: 43,900 PLN Net price: 10,450 EUR (according to exchange rate of 4.2 EUR) (Prices may vary with significant exchange fluctuations)

Condition: excellent (used), Catalogue number: 7715 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Bottom horizontal 220 mm 5.5 kW Fpodpfx Ajyy Iv Tjpwjg 2) Right vertical 130 mm 7.5 kW 3) Left vertical 130 mm 7.5 kW 4) Right vertical 130 mm 5.5 kW 5) Top horizontal 220 mm 11 kW – 5th spindle electrically adjustable up/down 6) Bottom horizontal 220 mm 5.5 kW 7) Bottom horizontal 220 mm 5.5 kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable vertically and laterally - Spindle diameter: 40 mm Feed system (top): - 6 double-toothed infeed rollers, driven, + 1 single roller - 3 double smooth rubber outfeed rollers, driven + 3 single rollers - Digital length counter Feed system (bottom): - Swivelling toothed steel infeed roller integrated into lower table - 3 smooth steel feed rollers - Feed drive via Cardan rollers - Pneumatic pressure rollers - Stepless feed speed adjustment + 2-speed gearbox: 10–60 m/min - Feed motor: 10 kW - Electric thickness adjustment - Body lifting motor: 0.75 kW - Centralised table lubrication - Extraction connection diameters: 5x140 mm, 3x120 mm - Machine dimensions (LxWxH): 4680x1780x1850 mm - Control cabinet dimensions (on pallet): 1020x1000x2230 mm - Weight: approx. 5000 kg ADVANTAGES - Equipped with 8 cutterheads - Universal spindle - Ideal for wet and dry timber - Made in Germany, WEINIG brand - Unpainted (original finish) - Very low operating hours - Used thickness planer, like new Net price: 165,900 PLN Net price: 39,500 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7221 TECHNICAL SPECIFICATIONS - min / max working width: 45 / 150 mm - min / max working height: 15 / 50 mm 3 spindles: 1) lower horizontal 11 kW 2) upper horizontal 22 kW (7000 rpm) 3) lower horizontal 5.5 kW spindle diameter: 40 mm - spindles 1 and 3 adjustable manually up/down, left/right - spindle 2 adjustable manually left/right - spindle 2 adjustable electrically up/down - spindles 2 and 3 equipped with brakes Top section: - 3 infeed, driven, metal toothed rollers - 1 outfeed, double, driven, rubber roller Bottom section: - infeed pressure device - grooved table - driven, smooth metal roller - electric thickness adjustment - variable feed speed: 6-24 m/min - feed motor: 3 kW - feed via Cardan shafts - infeed table length: 1970 mm - automatic table lubrication system - extraction port diameter: 1x150 mm, 2x140 mm - dimensions (LxWxH): 3070x2000x1800 mm - weight: 2000 kg ADVANTAGES Fsdpfxeyy I Ayo Apwepg – Made in Germany – With 3 heads – For processing lamellas – Grooved table – Complete set of cutter heads included – Unpainted – Very good condition – Used planer Net price: 125,900 PLN Net price: 29,980 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may be subject to change)

Condition: excellent (used), Catalogue number 7959 TECHNICAL DATA - Track width: 250 mm - Shaft width: 250 mm - Maximum saw blade diameter for multi-blade saw: 350 mm - Saw blade bore diameter: 70 mm - Maximum cutting height for multi-blade saw: 120 mm - Table width with clearance: 830 mm - Table length: 1780 mm – Top section: - Kickback devices - Pressure roller, sliding, metal, smooth Fodpfx Apjy Am Erjwepg - Kickback devices - Pressure roller, sliding - Shaft with saw blades - Pressure roller, sliding, metal, 2 pcs – Bottom section: - Guide rail - Kickback devices - Track (caterpillar) - Electric body up/down adjustment - Manual adjustment of shaft with saw blades - Central lubrication - Infinitely variable feed speed adjustment - Feed motor 1.1 kW - Main motor 37 kW - Extraction port diameter: 170 mm - Overall dimensions (L/W/H): 2000x1500x2000 mm - Weight: 1850 kg ADVANTAGES – German-made – Used multi-blade saw, in very good condition Net price: 45,900 PLN Net price: 10,930 EUR depending on the rate of 4.2 EUR (Prices may change with greater fluctuations)

Condition: excellent (used), Catalogue number 7784 TECHNICAL DATA - Spindle diameter: 30 mm - Working height of spindle: 150 mm Fpjdpfx Apeyk E Rhowjg - Interchangeable spindle - Spindle locking - Adjustable up/down + angle - Original cast iron fence with full adjustment - 4 spindle speeds + left/right: 3000/5000/6000/10000 rpm - Table dimensions: 1120x800 mm - Motor: 3.7 kW - Dimensions (L/W/H): 1100x1400x1160 mm - Weight: 775 kg ADVANTAGES – German-made – Used milling machine – Very good condition Net price: 6,900 PLN Net price: 1,640 EUR Net price calculated at a rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7651 Technical data: - Track width: 250mm - Shaft width: 250mm - Max saw blade diameter: 400mm - Saw blade bore diameter: 70mm - Max cutting height: 120mm - Table width with opening: 810mm - Table length: 1780mm – From above: - Pawls/kickers - Smooth pressure shaft - Pawls - Smooth pressure shaft - Shaft with saw blades - Smooth pressure shafts, 2 pcs – From below: Fpjdpfsyyyd Njx Apwsg - Guide - Pawls/kickers - Track - Central lubrication - Stepless feed speed adjustment - Feed motor 1.1kW - Main motor 37kW - Manual body lifting - Manual lifting of shaft with saw blades - Chip extraction connection diameter: 200mm - Overall dimensions (L/W/H): 2150x1480x1760mm - Weight: 1735kg ADVANTAGES – German-made – Stepless feed speed adjustment – Multi-blade saw, used, in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (at a rate of 4.25 EUR) (Prices may change depending on exchange rate fluctuations)

Condition: excellent (used), Catalog number 7805 TECHNICAL DATA - Track width: 340 mm - Roller width: 340 mm - Disc arbor diameter: 80 mm - Installed discs on upper shaft: 350 mm - Installed discs on lower shaft: 300 mm - Max cutting height: 200 mm - Min length of processed material: 700 mm – From above - 2 rows of kickback fingers - Smooth, slip, pressure shaft - Kickback fingers Fsdpey At Rhsfx Apwspg - 2 smooth, slip, pressure shafts - Saw shaft - 3 smooth pressure rollers – From below - Track conveyor - Saw shaft - Track conveyor - Infinitely variable feed speed adjustment - Main motors: 2 x approx. 55 kW - Feed motor: 3 kW - Electric up/down elevation of the main body - Manual adjustment of saw shafts - Central lubrication - Extraction port diameter: 2 x 200 mm - Dimensions (L/W/H): 2700 x 1800 x 2150 mm - Weight: approx. 5,000 kg ADVANTAGES – German-made – Double-shaft design – 2 x 55 kW motors – Used multi-blade saw, in very good condition Net price: 178,900 PLN Net price: 42,590 EUR (at 4.2 EUR exchange rate) (Prices subject to change with significant rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 6575 TECHNICAL DATA - Max. workpiece width: 230 mm - Max. workpiece height: 170 mm - 7 spindles: 1) Lower horizontal, 230 mm, 11 kW 2) Right vertical, 170 mm 3) Left vertical (spindle 2 & 3), 170 mm, 11 kW 4) Right horizontal, 170 mm, 5.5 kW 5) Upper horizontal, 230 mm, 11 kW 6) Lower horizontal, 230 mm, 7.5 kW 7) Universal, 230 mm, rotatable 360°, 7.5 kW - All spindles adjustable up/down, left/right - Spindles 3 and 5 electrically adjustable - ATS system - Spindle diameter: 40 mm Fedpfx Ajyyzigjpwspg - Electric brakes - From above: 4 driven infeed rollers, toothed, including 1 double roller - From above: 1 double rubber driven infeed roller - From above: 1 double rubber driven outfeed roller - From below: 2 metal driven feed rollers, smooth - From below: 1 double rubber driven feed roller - Feed via Cardan shafts - Pneumatically loaded feed rollers - Infinitely variable feed speed: 6-24 m/min - Feed drive motor: 5.5 kW - Electric thickness adjustment - Body lifting motor: 0.55 kW - Central table lubrication - Extraction port diameter: 7 x 140 mm - Dimensions (L/W/H): 5800 x 2050 x 1850 mm - Weight approx.: 4500 kg FEATURES – German-made, WEINIG brand – 7-head planer – Universal spindle – Equipped with ATS – For wet and dry timber – Used planer, in very good condition Net price: 159,900 PLN Net price: 38,070 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7909 TECHNICAL DATA - Max. workpiece width: 230 mm - Max. workpiece height: 130 mm - 6 spindles: 1) Bottom horizontal, 230 mm, 4 kW Fpodpfx Aoynktcopwog 2) Right vertical, 130 mm 3) Left vertical, 130 mm (spindles 2 & 3), 7.5 kW 4) Top horizontal, 230 mm, pneumatically adjustable front/rear, 5.5 kW, electrically adjustable up/down 5) Bottom horizontal, 230 mm, 4 kW 6) Trimming saw, pneumatically adjustable up/down, right/left, 2.2 kW - Saw blade diameter: 160 x 40 mm - All spindles adjustable up/down, right/left - All spindles equipped with electric brake - Spindle diameter: 40 mm - From above: 4 infeed traction rollers, gear-toothed including 2 double rollers - From above: 3 outfeed traction rollers, rubber, smooth, including 1 double roller - From below: rubber traction roller, double - Feed by Cardan shaft rollers - Rollers pneumatically pressed - Infinitely variable feed speed up to 25 m/min - Feed motor: 2.2 kW - Working pressure: 6-10 bar - Electric thickness adjustment - Central table lubrication - Infeed table length: 1980 mm - Extraction port diameter: 5 x 140 mm, 1 x 80 mm - Dimensions (L x W x H): 4000 x 1800 x 1700 mm - Weight approx. 3,500 kg ADVANTAGES – German-made, WEINIG brand – 5-head configuration – Operator’s manual (DTR documentation) – 6th spindle is a pneumatically adjustable trimming saw – Planer in ideal, very good condition Net price: 53,900 PLN Net price: 12,840 EUR Net price calculated at 4.2 PLN/EUR exchange rate (Price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), WEINIG HYDROMAT 22 AL Four-Sided Planer - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Lower horizontal: 220 mm, 5.5 kW 2) Right vertical: 130 mm, 7.5 kW 3) Left vertical: 130 mm, 7.5 kW 4) Right vertical: 130 mm, 5.5 kW 5) Upper horizontal: 220 mm, 11 kW – 5th spindle with electric height adjustment (up/down) 6) Lower horizontal: 220 mm, 5.5 kW 7) Lower horizontal: 220 mm, 5.5 kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal spindle: 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable up/down, left/right - Spindle diameter: 40 mm - From above: - 6 dual toothed feed rollers + 1 single roller - 3 dual smooth rubber outfeed rollers + 3 single rollers - Meter counter - From below: - Swiveling toothed steel infeed roller integrated in lower table - 3 smooth steel feed rollers - Feed via cardan drive rollers - Pneumatically-tensioned feed rollers - Stepless feed speed adjustment + 2-speed gearbox: 10–60 m/min - Feed motor: 10 kW - Electrically adjustable planing thickness - Lifting motor: 0.75 kW - Central table lubrication - Extraction port diameters: 5 x 140 mm, 3 x 120 mm - Machine dimensions (LxWxH): 4680 x 1780 x 1850 mm - Control cabinet dimensions (on pallet): 1020 x 1000 x 2230 mm - Approx. weight: 5,000 kg Feeder with centering device: - Roller width: 450 mm - 1 toothed powered infeed roller - 22 smooth powered rollers - Adjustable upper pressure Fjdpfxeyyzcme Apwjpg - Feeder length: 9,020 mm - Stepless speed adjustment: 10–60 m/min - Motor: 0.75 kW - Dimensions (LxWxH): 9,020 x 790 x 1,150 mm Net price: 180,000 PLN Net price: 42,860 EUR (based on 4.2 EUR/PLN exchange rate) (Prices subject to change depending on exchange rate fluctuations)

Condition: good (used), Year of construction: 1989, functionality: unexamined, working width: 220 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 120 mm, overall weight: 7,500 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 10, power: 105 kW (142.76 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Hydromat 22 B With grooved bed 10 spindles, Working width: 220 mm, working height: 120 mm, spindle diameter: 50 mm, Feed rate: 7.5 kW / 8- 40 m/min, Spindle arrangement: 1-bottom (7.5 kW) - with hydraulic clamping 2- Right (7.5 kW) 3-Left (11 kW) 4-Right (7.5 kW)- with straight jointer 5-Left (7.5 kW) 6-Top (15 kW) - with hydraulic clamping 7-Bottom (7.5 kW) - with hydraulic clamping 8-Top (7.5 kW) - with hydraulic clamping and straight jointer Fsdpfju Udd Sex Apwjpg 9-bottom (7.5 kW) - with hydraulic clamping and straight jointer 10-Uni (7.5) 6 driven rollers in the table

Condition: good (used), Feed unit Weinig EM 11 Fpedpoyth S Hjfx Apweg

Condition: good (used), functionality: fully functional, working width: 230 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 230 mm, working height: 170 mm, power of feed motor: 5,500 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 9, power: 95 kW (129.16 HP), input frequency: 50 Hz, Equipment: cabin, Four-sided planer Weinig Unimat 23, lamella machine 9 spindles, grooved bed Working width: 230 mm, working height: 170 mm, Fjdpfjx Hkp Nex Apwspg spindle diameter: 40 mm, feed: 5.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (5.5 kW) 4-Right (5.5 kW) 5-Top (11 kW) 6-Bottom (5.5 kW) 7-Top (7.5 kW) 8-Bottom (37 kW) 9-Uni (11 kW) 5 driven rollers in the table

Condition: used, Year of construction: 1998, functionality: fully functional, working width: 230 mm, spindle diameter: 50 mm, planing width: 150 mm, overall weight: 9,200 kg, table length: 2,000 mm, number of spindles: 9, 4-sided moulder with 9 spindles, configured as follows: lower horizontal spindle, right spindle moulder, left spindle moulder, right spindle moulder, left spindle moulder, upper horizontal spindle, upper horizontal spindle, lower horizontal spindle, universal spindle. Fedpfjy A Tugjx Apwspg

Condition: used, Year of construction: 2004, functionality: fully functional, working width: 230 mm, planing height: 160 mm, spindle diameter: 40 mm, planing width: 230 mm, working height: 160 mm, total width: 230 mm, total length: 5,000 mm, overall weight: 6,600 kg, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, rotational speed (min.): 8,000 rpm, workpiece height (max.): 160 mm, workpiece width (max.): 230 mm, input voltage: 400 V, table length: 2,500 mm, shaft diameter: 40 mm, number of spindles: 8, extraction connection diameter: 140 mm, Equipment: motor brake, WEINIG profiler, model Powermat 1000, equipped with: lower horizontal shaft, right spindle, left spindle for all widths, right spindle, upper horizontal shaft, lower horizontal shaft, upper horizontal shaft, lower horizontal shaft. CNC on left spindle, upper horizontal shafts, finishing lower horizontal shafts. 8,000 rpm motors, equipped with PowerLock, 80 mm spindle stroke, metric counter of produced linear meters, grooved table, feed speed: 36 m/min. Fsdpfx Apey Aywuewjpg

Condition: used, Year of construction: 1993, Tools IV 68, 78, and preservation protection. Fodpfsy Hrrxsx Apwepg Tenoning and slotting spindle – 3 tools Motor 7.5 kW Profiling spindle – 3 tools Motor 5.5 kW

Condition: used, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- 5 spindles with 8,000 rpm 4 x HSK/Powerlock Axially and radial CNC adjustments of the spindles via control CNC-controlled adjustment and positioning of the feed Table tops with guide blades at spindles 2 and 3. Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Fpodpfxjyy A Iqj Apwog Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) with depth...