Used Weinig High Mech for sale (491)

Condition: used, Year of construction: 2009, - Moulder 5 stations / 4 tool holders for sharpening Pin diameter: 40 mm Digital positioning Variable speed: 5 to 15 m/min Liftable inlet roller Pneumatic pressers Electric display meter Table lubrication via pedal 99 possible programs Capacity: minimum width 20 mm / maximum width 230 mm - minimum height 8 mm / maximum height 120 mm Hood opening safety feature CE standards => OK Tool holders: 125 mm diameter Engine power: Planer infeed = 5.5 KW Spindle tops left and right = 11 kW Upper planer = 7.5 kW Lower planer = 5.5 kW Iodjxxtlbjpfx Addstb Total machine power = 32 kW Suction diameter: 120 mm Voltage: 380 V Dimensions: 250 x 150 x H175 cm +/- 2.200 kg - Automatic charger Minimum piece length: 160 cm Maximum piece length: +/- 400 cm Loading height: 60 cm Dimensions: 195 x 45 x H165 cm

Condition: excellent (used), working width 230mm working height 120mm 5 heads heads set: bottom/right/left/top/bottom table lubrication pneumatic pressure of feeding rolls two axes heads regulation spindles speed 6000 RPM electric adjustment of pressure beam feeder with cardan variable regulated feeder solid silenced cabinet Itedpfx Adspkwaxsdjb

Condition: good (used), Year of construction: 2010, WEINIG NKT Finger Joint Cutter Double-Pack DP20 An industrial finger jointing line – engineered for maximum precision and efficiency Technical Specifications: Wood infeed length: min. 130 mm | max. 1000 mm Wood outfeed length: min. 3700 mm | max. 7400 mm Wood cross-section: min. 20 x 40 mm | max. 80 x 180 mm Cutter diameter: 370 mm Finger joint type: Vertical / Horizontal, 10/11 fingers, 3.8 mm pitch Glue application: 2-sided, PVAC white glue Connected load: 80 kW Note: The machine is currently dismantled and stored at our site. Inspection is possible by appointment. Itedpfx Ajx Ti Rfeddjb Scope of delivery: WEINIG NKT Double-Pack DP20 incl. control unit Integrated glue station for two-sided application Operating manual & documentation

Condition: good (used), functionality: fully functional, Feeder Weinig EM-4 Iedpfx Adjullxgedotb

Condition: good (used), Year of construction: 2008, I sell the fourside moulder Weinig Unimat 300, year 2008 Feeding speed 5-30 m/min. Working width 230mm Working height 130mm 5 spindles Configuration: bottom - right - left - top - bottom Total power 28kW 3-zone pneumatical pressure Good condition Isdpfx Adjr Arr Ejdotb Fully working! Available immediately

Condition: used, Year of construction: 1996, functionality: fully functional, working width: 180 mm, planing height: 120 mm, planing width: 180 mm, We are offering this used Weinig Quattromat 18 four-sided planer, year of manufacture 1996, ready for immediate operation. Ijdjx Rvr Djpfx Addjtb If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2015, WEINIG POWERMAT 1200 (6 SPINDLE) YEAR 2015 WIDTH 230MM Iodpfxeyak Iqe Addetb HEIGHT 160MM ALL SPINDLES 8000 RPM ALL SPINDLES 40MM SHORT INFEED TABLE 1: BOTTOM 11 KW 2: RIGHT 11 KW 3: LEFT 11 KW 4: TOP 15 KW 5: TOP 15 KW 6: BOTTOM 11 KW CNC AXIAL CONTROL ON SPINDLES 3, 4 AND 5 40 M/MIN+ ELECTRIC. FEED 7 x DRIVEN TOP FEED ROLLERS 3 x DRIVEN BED FEED ROLLERS AUTOM. BED LUBRICATION PNEUM. POWERED SIDE PRESSURE ROLLERS DIMENSION: APPR 3000 X 2000 X 1800 MM WEIGHT: APPR. 4500 KGS DUSTHOODS: 6 x 140 MM DIAMETER

Condition: excellent (used), working width 230mm Iedpfxoqfd Dle Addetb working height 120mm 4 spindles spindles set: dolna/prawa/lewa/górna spindles diameter 40mm pneumatic pressure of feeding rolls table lubrication

Condition: good (used), Year of construction: 1983, functionality: fully functional, Four-sided planer / moulder Unimat 22A, 7 spindles Year of manufacture 1983 S/N 225-347 Manufacturer Weinig Germany Planing width 220mm Plane height 120 mm 7 planing shafts: Jointer table length 2000 mm Spindle arrangement (speed of the working spindles 6000 rpm) 1. bottom, 4 kW 2. right, 3 kW 3. left, 4 kW 4. right, 4 kW 5. top, 7.5 kW 6. bottom, 4 kW 7. universal, 11 kW Powered smooth pull-out roller in the table spindle diameter 40 mm Flying circle of the dressing spindle 125 mm Flying circle of the dressing spindle 100-180mm Largest flying circle of the milling spindles 180mm Cardanic feed Feed infinitely variable (frequency converter) 6-36 m /min. Iedperb D Dlefx Addetb Manual Waxilit pump Outer dimensions L 4000 mm x W 1600 mm x 1700mm 4500 kg

Condition: good (used), Year of construction: 1982, WEINIG Four side planer, 5 heads PM 17 machine no. 1329-2356 year of manufacture: 1982 planning width 170 mm planning height 120 mm 5 spindles: max. tool length 180 mm, 130 mm infeed table length 2000 mm with planer heads 6 spindles arrangement: 1 bottom 4 kW Itjdpfjicbhvox Addsb 2. right 3 kW 3. left 5,5 kW 4. top 5,5 kW 5. bottom 4 kW / universal spindle diameter approx. 35 mm infeed speed 6,5 - 49 m/min. manual lubricant pump Incl. 5 tools for all heads dimension 4500 mm x 1300 mm x H 1500 mm Weight appr. 3800 kg technical specification under subject of correction

Condition: used, Year of construction: 1980, No. 3192 Four-sided planing machine WEINIG U 17 A Used, year of construction 1980, machine available from February 2025 Machine still in operation 6 spindles Arrangement of spindles bottom - right - left - top - bottom - bottom Working width 170 mm (with a tool flight circle of 125 mm) Working height 120 mm (with a tool flight circle of 125 mm) Joining spindle 4 HP Itsdpfsvkhccjx Addsb All other spindles 5.5 HP Feed 2 or 3 HP Speed of the work spindles 6000 rpm Work spindles Ø 40 mm Smallest flying circle Ø of the moulder spindles 100 mm Largest flying circle Ø of the moulder spindles 180 mm Continuous feed, infinitely variable 6 - 18 m/min Transport roller Ø (hardened) 140 mm Transport roller width 50 mm Adjustment range of feed table and joining ruler right 10 mm Adjustment range of vertical spindles under table 40 mm Adjustment range of the horizontal spindles (axial) 30 mm Dressing table length 2 m Sale on behalf of customer, ex location Upper Austria, without disassembly, without transport and assembly Errors in description and price excepted Disassembly, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: good (used), WEINIG UNIMAT 23 9 SPINDLE SHORT INFEED TABLE 1: BOTTOM 7,5KW 2: RIGHT 7,5 KW 3: LEFT 7,5 KW 4: RIGHT 7.5 KW 5: TOP 11 KW 6: BOTTOM 7,5 KW 7: TOP 7,5 KW 8: BOTTOM 7,5 KW 9: UNIVERSAL 7,5 KW 360° TILTABLE 15 x DRIVEN TOP FEED ROLLERS 5 x DRIVEN BED FEED ROLLERS AUTOM. BED LUBRICATION PNEUM. POWERED SIDE PRESSURE ROLLERS PNEUM. POWERED HOLD DOWN ON 6+8 DIMENSION: APPR 5400 X 2000 X 1800 MM WEIGHT: APPR. 6500 KGS Itodpfeyahubex Addjb DUSTHOODS: 9 x 140 MM DIAMETER POSSIBLE TO INCREASE MOTOR SIZES AS NEEDED

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 96409, type of input current: three-phase, input voltage: 380 V, power: 73 kW (99.25 HP), input frequency: 50 Hz, input current: 159 A, We offer this used Weinig Unimat 23 moulder, year of construction 2002. Machine number: 96409 Machine type: Unimat 23 Year of construction: 2002 Circuit drawing number: B.96409 Operating voltage: 3 x 380 V 50 Hz Control voltage: 230 V 50 Hz Nominal current most powerful motor: 29 A Nominal current: 159 A Main fuse: 160 A Power: 73 kW Iedpfxox Ttyde Addetb If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: refurbished (used), Shear machine Weinig brand model U22N, refurbished. 22 cm bench + faced bench 8 Trees with composition: lower, right, left, right, upper, lower, upper, universal Isdpjx Syrksfx Addetb Automatic lateral advancement. Very versatile machine, suitable for both long pieces (with side loader) and short pieces (close-tow and grooved bed). Excellent degree of preservation.

Condition: used, Year of construction: 2002, functionality: fully functional, planing width: 280 mm, working height: 80 mm, overall weight: 2,500 kg, For sale: WEINIG Opticut 150 cross-cut optimizing saw. The machine has been with our company since new. Good condition, regularly serviced, and in continuous use. Viewing and testing on site possible. Scheduled dismantling at the end of 2025. Included: a new infeed belt – not yet installed. Itjdpfx Adjxvyt Tjdob

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 647-1806 POS21, WEINIG stacking device in very good condition, fully automatic stacker, maximum size of stacked package 5m x 1m x 1m, up to 9 interlayers per layer. Complete with CRP 600 throughfeed optimizing saw for chalk marking. Machines are in continuous operation; inspection is welcome. Isdpoxzk S Rsfx Addotb

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Itedpfxsxz Hh Uo Addeb Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. 1 WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the e...

Condition: excellent (used), working width: 250 mm, planing height: 140 mm, spindle diameter: 50 mm, planing width: 250 mm, working height: 140 mm, power of feed motor: 30,000 W, spindle speed (max.): 6,000 rpm, height adjustment type: hydraulic, type of input current: three-phase, number of spindles: 9, input frequency: 50 Hz, Weinig Hydromat 25 9 spindles, Working width: 250 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 30 kW / 6 - 100 m/min, Spindle arrangement: 1-bottom (11 kW) - with hydraulic clamping 2-Right (9 kW) 3-left (11 kW) 4-Right (9 kW) 5-Top (15 kW)- with hydraulic clamping Itsdpfx Adoq Au Tljdob 6-Bottom (7.5 kW) - with hydraulic clamping 7-Top (7.5 kW) - with hydraulic clamping and straight jointer 8-Top (11 kW) - with hydraulic clamping and straight jointer 9-bottom (11 kW) - with hydraulic clamping and straight jointer 11 driven rollers in the table

Condition: good (used), functionality: fully functional, working width: 255 mm, planing height: 160 mm, spindle diameter: 40 mm, planing width: 255 mm, working height: 160 mm, power of feed motor: 3,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Unimat 23 E with 5 spindles, Working width: 255 mm, Working height: 160 mm, Spindle diameter: 40 mm, Feed: 3 kW / 6 – 36 m/min, Spindle arrangement: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (7.5 kW) 4-Top (5.5 kW) 5-Bottom (4.0 kW) Isdpfjxg Sa Hox Addstb One driven roller at the outfeed table.

Condition: good (used), Year of construction: 2006, WEINIG MOULDER MACHINE MOD. UNIMAT 500 YEAR 2006 - EC STANDARD Itsdpfxeq Ru Dys Addsb PRICE ON REQUEST

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, working width: 220 mm, planing height: 140 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 140 mm, power of feed motor: 15,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 7, input frequency: 50 Hz, Weinig Hydromat 22 BL 7 spindles, Working width: 220 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 15 kW / 6 - 60 m/min, Beesjj3Vck9 Spindle arrangement: 1-bottom (7.5 kW) with hydraulic clamping 2- Right (11 kW) 3-Left (11 kW) 4-Top (11 kW) 5-bottom (7.5 kW)-with hydraulic clamping, straight jointer and profile jointer 6-Top (11 kW) with hydraulic clamping, straight jointer 7-bottom (11 kW) - with hydraulic clamping, straight jointer and profile jointer Iodpfx Ajulnr Aeddstb 6 driven rollers in the table

Condition: used, Cabin for Weinig Unimat 300 Isdpfexga E Dox Addjtb

Condition: used, functionality: fully functional, working width: 240 mm, shaft diameter: 38 mm, Spindle from Weinig Powermat 400. Itedpfsu D Nihox Addob Price per piece

Condition: used, Year of construction: 1979, functionality: fully functional, working width: 250 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 250 mm, working height: 160 mm, overall weight: 10,000 kg, power of feed motor: 30,000 W, spindle speed (max.): 6,000 rpm, height adjustment type: mechanical, planer shaft diameter: 50 mm, type of input current: three-phase, table length: 1,000 mm, number of spindles: 9, input frequency: 50 Hz, Weinig Hydromat 25 9 spindles, Working width: 250 mm, working height: 140 mm, spindle diameter: 50 mm, Isdpfx Adsqvml Redotb feed: 30 kW / 6 - 65 m/min, Spindle arrangement: 1-bottom (11 kW) - with hydraulic clamping 2- Right (7.5 kW) 3-left (11 kW) Jytnaq 4-Left (7.5 kW) 5-Right (7.5 kW) 6-Top (7.5 kW) - with hydraulic clamping 7-Top (15 kW) - with hydraulic clamping and straight jointer 8-Bottom (11 kW) - with hydraulic clamping and straight jointer 9-bottom (11 kW) - with hydraulic clamping and straight jointer 8 driven rollers in the table

Condition: excellent (used), Year of construction: 1979, working width 250mm working height 140mm 8 heads 3 toothened rolls in the table before first head heads set: bottom/right/left/right/left/top/top/bottom variable regulated feeder to 100m/min spindles diameter 50mm two side bearings of spindles feeder with cardan spindles speed 6000 rpm pneumatic pressure of feeding rolls two side heads regulation two axes heads regulation iron cast body Itjdpox Sw T Ssfx Addsb