Used Weinig Uniplan 23 for sale (481)

Condition: used, Planing and moulding machine Weinig Profimat 23 for four-sided planing and profiling with universal spindle for pre-planed wood or other angled (planed) workpieces such as MDF or plastic parts. The planing spindle can be retrofitted if required. Spindles: 5 Spindle 1: Right (7.5 kW) Spindle 2: Left (motor together with spindle 1) Spindle 3: Top (7.5 kW) Spindle 4: Bottom (5.5 kW) Spindle 5: Uni (5.5 kW) Working width: 170 mm Working height: 120 mm Spindle diameter: 35 mm Feed: 2.2 kW // 5-24 m/min. spindles: 5 spindle 1: Right (5.5 kW) Dressing table length: 2.000 mm spindle 3: Above (4kW) Ltsdpfx Ahexu H R Ao Uea spindle 2: Right / 7.5 kW / 40 mm spindle 4: Bottom (4kW) spindle 5: Uni (4 kW) working width: 230 mm working height: 120 mm feed: 5 - 22 m/min control: ATS system table rollers: Driven table roller in the outlet

Condition: excellent (used), Year of construction: 1996, working width: 230 mm, planing height: 120 mm, spindle diameter: 40 mm, planing width: 230 mm, working height: 120 mm, power of feed motor: 4,000 W, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Unimat 23 with 5 spindles. Working width: 230 mm, Working height: 120 mm, Spindle diameter: 40 mm, Feed: 4 kW / 6 – 36 m/min, Spindle configuration: 1-Bottom 2-Right 3-Left 4-Top 5-Bottom Ljdex Ndb Ropfx Ah Uota Short-piece package Three powered rollers in the table. Note that the digital control system is defective – the machine operates only via manual adjustment. This means measurements are not displayed accurately and test pieces may be necessary. However, the defect is repairable.

Condition: good (used), Year of construction: 1994, functionality: fully functional, 1 used Weinig four-sided planer UNIMAT 23, 5-head with stacking unit for board lengths up to 5.50 m Ledpfx Ahex Ngiqj Ueta Planing width: 230 mm Planing height: 150 mm Spindle diameter: 50 mm Spindle arrangement: bottom, right, left, top, bottom (with jointer) Total connected load: 37 kW Outfeed roller conveyor: 6000 mm long, 800 mm wide with transfer to left and right Left: transfer to stacking machine Right: board turner Stacking unit Lux for board lengths up to 5.50 m, width up to 1.30 m

Condition: used, Year of construction: 1997, Beam planer 260 x 160 mm, trailing chamfering unit on upper spindle, air cushion table with dual-axis control for left and upper spindle, brand new control system (latest Weinig version) Max. working width: 260 mm Max. working height: 160 mm Number of spindles: 6 units 1st spindle: bottom, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 2nd spindle: right, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm, motor power 11.0 kW (shared motor with left spindle) 3rd spindle: left, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm 4th spindle: top, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 5th spindle: bottom, spindle diameter 40 mm, motor power 11.0 kW, speed 6000 rpm, clamping length 270 mm 6th spindle: top, chamfering unit Motor brakes: mechanical Electric height adjustment for upper spindle Optional with/without feed system Feed brake system: Yes Feed speed stepless up to: 3 - 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubricant pump: manual Max. jointing allowance: 10 mm Jointing rebate cutter on jointer: Yes Powered rollers in table: 1 unit Control system: PLC control Spindle readout: mechanical digital display Infeed rollers before jointer: Yes Air cushion table: three-strip Central lubrication point: Yes Description: short infeed table 1050 mm with internal lighting Ljdpfx Ahswwwkho Uota Location: Nattheim

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Ljdpfexz Hh Uex Ah Usta Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. 1 WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the e...

Condition: excellent (used), Year of construction: 1995, Planer - Moulder Manufacturer: Weinig Type: Profimat 23 Year of manufacture: 1995 Working width: 230 mm Working height: 120 mm Planing table length: 2,000 mm Speeds: 6,000 rpm Spindle diameter: 40 mm Feed speed: 4 - 24 m/min Number of shafts: 6 Grooving saw: Yes Arrangement: U-R-L-R-O-U-grooving saw 1st shaft, bottom, 7.5 kW 2/3rd Shaft, right, left, 7.5 kW 4th shaft right, 7.5 kW Lsdpfxov Id Ngs Ah Uota 5th shaft top, 7.5 kW 6th shaft, bottom, 4.6 kW Groove saw: 2.2 kW Dimensions: approx. 4,500 - 2,000 - 1,800 mm Weight: approx. 3.5 tons

Condition: used, Planing and moulding machine Weinig Profimat 23 for four-sided planing and profiling with ATS system. spindles: 6 spindle 1: Below spindle 2: Right spindle 3: Left spindle 4: Right spindle 5: Upstairs spindle 6: Below working width: 230 mm working height: 120 mm Dressing table length: 2.000 mm Planer table length: 2.000 mm control: ATS Control: ATS delivery time: On demand sample picture: Illustration similar Ledpfx Ahew I A Sqs Uota

Condition: good (used), functionality: fully functional, working width: 255 mm, planing height: 160 mm, spindle diameter: 40 mm, planing width: 255 mm, working height: 160 mm, power of feed motor: 3,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Unimat 23 E with 5 spindles, Working width: 255 mm, Working height: 160 mm, Spindle diameter: 40 mm, Feed: 3 kW / 6 – 36 m/min, Spindle arrangement: 1-Bottom (5.5 kW) Ltedjxg Sa Hopfx Ah Usa 2-Right (5.5 kW) 3-Left (7.5 kW) 4-Top (5.5 kW) 5-Bottom (4.0 kW) One driven roller at the outfeed table.

Condition: used, Year of construction: 2002, Weinig four-sided planer max. planing width 230mm max. planing height 120mm Digital positioning 5 stations + 1 output unit for rounding or chamfering Lodoxg Nbuopfx Ah Ueta Total power 43kw 380V

Condition: good (used), Planing width 20-230mm Planing height 8-160mm Number of heads 6 Arrangement of heads Bottom Right Left Right Top Bottom Drawing rollers in work table 4 Ltedpfx Ahovbwzve Usa Pneumatic pressures hydraulic feeder

Condition: used, Year of construction: 2000, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 + 500 mm Feed motor 3 kW Feed speed 6-36 m/min. 1 WEINIG Unimat 23 E 4-side Planer and Moulder ----- 6 spindles (2 on the right), powerful motors, EM 11 feed magazine available Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle, bottom 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool travel radius 125 - 180 mm Ltodpfxjwqr Rvo Ah Uoa Folding device including tool Hardened table insert in front of 1st lower spindle 2nd spindle, right 11.0 kW ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??6000 rpm Tool travel radius 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axis adjustment range 80 mm 3rd spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-200 mm Max. groove depth 35 mm Axis adjustment range 80 mm Pressure shoe in front of left spindle, including lateral roller pressure, spring-loaded 4th spindle, right 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axis adjustment range 80 mm 5th spindle, top 11.0 kW ----- Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-200 mm Max. throat depth 35 mm Axis adjustment range 45 mm Split pressure shoe in front of the upper spindle, adjustable to the tool travel circle and pivoting away from the tool, spring-loaded. 6. Lower spindle 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool travel circle 112-250 mm Max. throat depth 15 mm Axis adjustment range 45 mm Spindles in general ----- All throat spindles with high concentricity. Lubrication points for the axial spindle movement. Spindle length of vertical spindles 170 mm Feed system ----- Motor with mechanical brake, 3 kW Mechanical feed continuously adjustable 6 - 36 m/min. Feed roller in front of the first lower tool pneumatically controlled up-down, Durofer pointed tooth rollers (Weinig patent) with depth gauge and self-cleaning Adjustment range of the feed rollers relative to the left spindle, axial: 35 mm Extension of the oscillating axis relative to the left spindles to 150 mm Machine electrical system ----- Operating voltage: 380-400-415 volts, 50 Hz. Machine stands, tables, and stops ----- Surface table 2.5 m long (including jointing ruler) Aluminum extension 0.5 m for surface table, including extension of the jointing ruler Manual Waxilit pump for resin removal from the table One driven rubber roller (spring-mounted in the outfeed table) Pressure elements and Guides ----- Pneumatic pressure rollers from above Pneumatic pressure rollers pivot away from above, opposite the right-hand spindles for easy tool changes Machine Operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Discharge after the upper spindle with mechanical digital display. ATS/E system, automatic 2-axis positioning for spindles 3 and 4 Min. working height 12 mm Electric height adjustment of the upper spindles and the feed Central p...

Condition: excellent (used), Year of construction: 1999, Four-side planer Manufacturer: Weinig Type: U 23 EL Year of manufacture: 1999 Number of spindles: 8 Working width: 20 - 230 mm Working height: 8 - 120 mm Planing table length: 2,500 mm Feed: 4 kW Feed speed: 4 - 24 m/min Total power: approx. 60 kW Ltedpfxovy Ebuj Ah Usa 1 spindle: bottom horizontal 7.5 kW, 50 mm diameter, 8,000 rpm, tool diameter: 125 - 180 mm 2 spindle: right, vertical 7.5 kW, 50 mm diameter, 8,000 rpm, tool diameter: 112 - 250 mm 3 spindle: left, vertical 7.5 kW, 50 mm diameter, 8,000 rpm, tool diameter: 112 - 200 mm 4 Spindle: Right, vertical 7.5 kw, 50 mm diameter, 8,000 rpm, tool diameter: 112 - 250 mm 5 Spindle: Top, horizontal 7.5 kw, 50 mm diameter, 8,000 rpm, tool diameter: 112 - 200 mm 6 Spindle: Bottom, horizontal 7.5 kw, 50 mm diameter, 7,200 rpm, tool diameter: 112 - 250 mm 7 Spindle: Top, horizontal 7.5 kw, 50 mm diameter, 7,200 rpm, tool diameter: 112 - 250 mm 8 Spindle - saw unit: Top, horizontal 2.2 kw, 40 mm diameter, 8,000 rpm, tool diameter: 180 mm Including two conveyor tables

Condition: used, Weinig Unimat 23E planing and moulding machine for four-sided planing and profiling of wood with groove bed for short and curved workpieces as well as mobile spindle and long planing table. working width: 230 mm working height: 160 mm spindles: 6 spindle 1: Bottom / 5.5 kW / 50 mm spindle 2: Right / 11 kW / 50 mm spindle 3: Links / 11 kW/ 50 mm spindle 4: Top / 5.5 kW / 50 mm spindle 5: Top / 5.5 kW / 50 mm spindle 6: Bottom / 5.5 kW / 50 mm Dressing table length: 2.500 mm * feed: 5,5 kW feed: 5,5 kW Axial stroke vertical spindles: 80 mm Axial stroke horizontal spindles: 45 mm Short parts package: Yes groove bed: Yes table rollers: Driven table roller in the outlet Ledpfx Ahov Ec Nts Uota groove bed milling cutter: Included Control: mobile spindle Slot bed milling cutter: Included * Axial stroke vertical spindles: 80 mm * Axial stroke horizontal spindles: 45 mm short parts package: Yes control: mobile spindle

Condition: good (used), functionality: fully functional, working width: 230 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 230 mm, working height: 170 mm, power of feed motor: 5,500 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 9, power: 95 kW (129.16 HP), input frequency: 50 Hz, Equipment: cabin, Four-sided planer Weinig Unimat 23, lamella machine 9 spindles, grooved bed Ledox Hkp Njpfx Ah Ujta Working width: 230 mm, working height: 170 mm, spindle diameter: 40 mm, feed: 5.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (5.5 kW) 4-Right (5.5 kW) 5-Top (11 kW) 6-Bottom (5.5 kW) 7-Top (7.5 kW) 8-Bottom (37 kW) 9-Uni (11 kW) 5 driven rollers in the table

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, extraction nozzle diameter: 140 mm, planer shaft diameter: 40 mm, workpiece height (max.): 230 mm, type of input current: three-phase, number of spindles: 7, working range: 230 mm, blade shaft diameter: 50 mm, Equipment: cabin, motor brake, Four-sided planer Weinig Hydromat 23, 80m/min Working width: 230mm Working height: 160mm Number of spindles: 7 Spindle configuration: 1. Bottom: 15kW 2. Right: 11kW 3. Left: 11kW 4. Top: 15kW Ledpoxww Hmofx Ah Ujta 5. Top: 7.5kW (hydro support) 6. Bottom: 11kW (hydro support) 7. Universal: 11kW (variable speed via frequency inverter) Planing dimension control from ATS panel Spindle speed: 6000 rpm Spindle diameter: 50mm 5 feed rollers in working table Feed speed adjustable via frequency inverter up to 80m/min Feed driven by cardan shaft Pneumatic hold-downs Technical documentation included Machine dimensions: 460x230x200cm (H) Weight: 6000kg

Condition: excellent (used), WEINIG Unimat 23 E four-side planer Ljdpoxvc Uajfx Ah Ueta Maximum planing width: 230mm, Maximum planing height: 130mm, 5 spindles, Manual adjustment of planing dimensions, Spindle arrangement: bottom 7.5kW; left and right 11kW; top 11kW; bottom 7.5kW, Motors with brakes, Spindle diameter: 40mm, Fully adjustable spindles, Machine equipped with 4 feed rollers on the table, suitable for wet timber, Feed via cardan shafts with stepless regulation, Machine supplied with the heads shown on the spindles, Cardan shafts not worn, tables unworn, runs smoothly without vibrations or oscillations, Robust planer in original condition, weight approx. 5t. Very good condition, everything works.

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Ltjdpfx Ahexpn T Uo Uoa Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ----- Machine was factory overhauled by Weinig in 2024. Technical Specifications Summary (Please inquire about any additional accessories included) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically timed up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: pneumatically timed up-down glazing bead saw Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Can be used for glazing bead cutting or as a grooving machine > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with 99-program memory > Machine operation: Window package Joint control of the right spindle and the glazing bead feed via manual selector switch on the control panel > Spindles with mechanical digital display (Technical data according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 1996, Weinig Hydromat 23 Technical data Ltjdpfx Ahjqrt Eke Uea Working width 30 - 230 mm Working height 19 - 200 mm Spindle down, right, left, up, down u- re-li-o-u.o without infeed machine only Machine is dismantled, immediately available Transport can be organized

Condition: used, Planing and splitting machine Weinig type Unimat 23 SP for precise planing (or pre-planing) and splitting of solid wood in one operation. The machine offers high processing quality and is ideal for efficient series production in the wood industry. Optional: Ref. No.: 100079 Flat magazine Weinig EM12 Technical specifications: tba spindles: 4 working width: 230 mm working height: 120 mm spindle 1: Bottom (5.5 kW) Ljdsw I Dcdopfx Ah Ueta spindle 2: Top (5.5 kW) spindle 3: Right (11 kW) spindle 4: Links (11 kW) feed: 5,5 kW Tools: Included

Condition: good (used), Slotting bed for four-sided planer WEINIG Unimat 23 with 6 spindles. Used condition Lodpfsunbuvex Ah Ueta

Condition: used, Weinig Unimat 23 Technical data Working width 30 - 230 mm working height 19 - 200 mm elevated on pedestal Ledpfjncc Igex Ah Ueta u- re-li-o-u.o without feeder only machine machine is dismantled, immediately available Transport can be organized

Condition: used, Planing and moulding machine Weinig Hydromat 2000 for four-sided planing and profiling of wood with grooved bed, without soundproof cabin. * Spindles: 5 spindles: 5 spindle 1: Bottom / 7.5 kW spindle 2: Right / 7.5 kW * Spindle 1: Bottom / 7.5 kW spindle 3: Links / 11 kW spindle 4: Bottom / 11 kW spindle 5: Top / 15 kW * Spindle 2: Right / 7.5 kW working width: 230 mm working height: 160 mm spindle diameter: 50 mm * Spindle 3: Left / 11 kW * Spindle 4: Bottom / 11 kW * Spindle 5: Above / 15 kW * working width: 230 mm Ledpfx Ajrmvhfoh Ueta * working height: 160 mm * Spindle diameter: 50 mm

Condition: good (used), Year of construction: 1993, functionality: fully functional, working width: 230 mm, planing height: 170 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 170 mm, power of feed motor: 7,500 W, height adjustment type: electric, planer shaft diameter: 50 mm, number of spindles: 8, input frequency: 50 Hz, Equipment: cabin, motor brake, 8 spindles, Working width: 230 mm, working height: 180 mm, Lodsr Axwnjpfx Ah Ueta spindle diameter: 50 mm, feed rate: 7.5 kW / 6 - 36 m/min, Spindle arrangement: 1-bottom (7.5 kW) - scoring spindle 2-bottom (7.5 kW) 3-Right (11 kW) 4-Left ( 11 kW) 5-Top (11.0 kW) 6-Bottom (22.0 kW) 7-Bottom (7.5 kW) 8-Top (7.5 kW) 8 driven rollers in the table

Condition: good (used), Year of construction: 1998, functionality: fully functional, Four-side planer Weinig Hydromat 23, finger jointing machine 8 spindles, Working width: 230 mm, Working height: 160 mm, Spindle diameter: 50 mm, Feed: 7.5 kW / 6–36 m/min, Spindle arrangement: Ltodpfxexqh E Hs Ah Uea 1-Bottom (7.5 kW) 2-Right (7.5 kW) 3-Left (7.5 kW) with profile jointer 4-Right (7.5 kW) with profile jointer 5-Top (7.5 kW) with hydraulic clamping 6-Bottom (30 kW) with hydraulic clamping 7-Top (7.5 kW) with hydraulic clamping and straight jointer 8-Bottom (7.5 kW) with hydraulic clamping and straight jointer. Hard coating. Two powered rollers in the table.

Condition: ready for operation (used), functionality: fully functional, working width: 260 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 170 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Profimat 23 E Working width: 260 mm, working height: 170 mm, 5 spindles, spindle diameter: 40 mm, Spindle arrangement: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW 4- Top - 5.5 kW 5- Bottom - 11 kW Ltodpfxovgnb Rs Ah Uea Feed rate: 6 - 24 m/min - 4 kW Air cushion in the table One driven roller in the table at the exit. With tool.