Used Weinig Uniplan 23 for sale (549)

Condition: used, Year of construction: 2002, 5 stations + 1 milling unit Digital positioning Table lubrication Air cushions in the table Capacity: 230 mm / 120 mm Total power: 43 kW 380 V Equipped with 4 helical tool holders with inserts Machine documentation and service keys Machine overhauled and available in stock Pgsdpfey S Rkqex Abuou

Condition: used, Second-hand Weinig Uniplan control cabinet, suitable as a source of spare parts or for building a new control cabinet with an operating panel. Available: No. 1 and No. 2 Pgjdpfx Abezrxtdouju

Condition: excellent (used), functionality: fully functional, spindle diameter: 40 mm, spindle speed (min.): 6,000 rpm, working width 230mm working height 140mm 6 spindles spindles set: bottom/right/left/right/top/bottom spindles diameter 40mm variable regulated feeder electric adjustment of infeed fence electric adjustment of infeed table ATS fast locking spindle system Pgodpfx Ajy N N S Uobuou

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 102940, WEINIG HYDROMAT H23 ELECTRONIC FEED FREQUENCY CONTROLLED. FEED MOTOR 22 KW 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH 220MM TOP FEED ROLLERS BOTTOM 15KW 6,000 RPM, OUTBOARD BEARING, JOINTER READY RIGHT 11KW 6,000 RPM JOINTER READY LEFT 15KW 8,000 RPM JOINTER READY RIGHT 11KW 8,000 RPM JOINTER READY LEFT 15KW 8,000 RPM, JOINTER READY TOP 18.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY + OUTBOARD BEARING TOP 18.5KW 7,100 RPM OUTBOARD BEARING, JOINTER READY + OUTBOARD BEARING BOTTOM 22 KW 4,000 to 8,000 RPM BY INVERTER, OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS (2X 220MM + 10X 140MM) 7X BOTTOM FEED ROLLERS POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED Pgsdpfx Aezv Sz Nobusu MACHINE LENGTH 5.2M

Condition: excellent (used), Year of construction: 2001, operating hours: 9,089 h, functionality: fully functional, machine/vehicle number: 94250, WEINIG HYDROMAT H23 ELECTRONIC FEED FREQUENCY CONTROLLED (8 – 60 M/MIN). FEED MOTOR 15 KW 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH (GROOVED FEED GUIDANCE, SEE USES AND BENEFITS HIGHLIGHTED BELOW) BOTTOM 7.5KW 6,000 RPM RIGHT 7.5KW 6,000 RPM LEFT 7.5KW 6,000 RPM JOINTER READY RIGHT 7.5KW 6,000 RPM LEFT 7.5KW 6,000 RPM JOINTER READY TOP 11KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 7.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY TOP 7.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS 6X BOTTOM FEED ROLLERS CNC ADJUSMENT OF 1ST BEDPLATE FROM CONTROL PANEL POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED FULL SOUND ENCLOSURE AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED EXHAUST MANIFOLD INCLUDED MACHINE LENGTH 5.2M POSSIBLE TO OFFER MECHANISATION IF NEEDED POSSIBLE TO OFFER MECHANISATION SPECIFICALLY FOR SHORT LENGTH FEEDING AND STACKING IF NEEDED Grooved Feed Guidance, Core Functions & Benefits: The longitudinal grooves milled directly into the bedplates work in conjunction with custom bottom cutterhead knives or grooving cutters. The initial cutter cuts matching grooves into the underside of the raw stock, registering it securely to the bed's grooves to keep short or cupped boards running straight without drifting off the fence. Friction & Resin Relief: Standard flat bedplates create significant surface drag when feeding wet, sap-rich, or resinous timber (like pine, fir, or green hardwood). The channels reduce overall contact area, lowering friction and preventing suction/sticking. Debris & Pitch Clearance: Sawdust, wood resin, and pitch buildup can cause uneven heights or feeding jams. Grooves act as evacuation paths, allowing fine dust and pitch to fall away from the main bearing surface. Wax/Lubricant Distribution: When paired with an automatic or manual bed lubrication system (such as table lubrication pumps), the grooves help distribute wax/oil evenly across the table rather than letting it wipe away on the first board. Podpfx Abjz Eznujusgu Common Applications Short Stock Processing: Ideal for running short pieces (such as parquet components, drawer sides, or short moulding blanks) that would otherwise struggle to maintain parallel alignment against the side fence. Cupped or Unseasoned Wood: Prevents cupped or warped boards from rolling or twisting as they hit the vertical and horizontal cutter spindles. High-Speed Feed Lines: Reduces the strain on feed rollers and drive systems by lowering bed drag during continuous industrial runs.

Condition: excellent (used), Year of construction: 2001, operating hours: 9,089 h, functionality: fully functional, machine/vehicle number: 94250, WEINIG HYDROMAT H23 ELECTRONIC FEED FREQUENCY CONTROLLED (8 – 60 M/MIN). FEED MOTOR 15 KW 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH (GROOVED FEED GUIDANCE, SEE USES AND BENEFITS HIGHLIGHTED BELOW) BOTTOM 7.5KW 6,000 RPM RIGHT 7.5KW 6,000 RPM LEFT 7.5KW 6,000 RPM JOINTER READY RIGHT 7.5KW 6,000 RPM LEFT 7.5KW 6,000 RPM JOINTER READY TOP 11KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 7.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY TOP 7.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS 6X BOTTOM FEED ROLLERS CNC ADJUSMENT OF 1ST BEDPLATE FROM CONTROL PANEL POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED FULL SOUND ENCLOSURE AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED EXHAUST MANIFOLD INCLUDED MACHINE LENGTH 5.2M POSSIBLE TO OFFER MECHANISATION IF NEEDED POSSIBLE TO OFFER MECHANISATION SPECIFICALLY FOR SHORT LENGTH FEEDING AND STACKING IF NEEDED Grooved Feed Guidance, Core Functions & Benefits: The longitudinal grooves milled directly into the bedplates work in conjunction with custom bottom cutterhead knives or grooving cutters. The initial cutter cuts matching grooves into the underside of the raw stock, registering it securely to the bed's grooves to keep short or cupped boards running straight without drifting off the fence. Friction & Resin Relief: Standard flat bedplates create significant surface drag when feeding wet, sap-rich, or resinous timber (like pine, fir, or green hardwood). The channels reduce overall contact area, lowering friction and preventing suction/sticking. Debris & Pitch Clearance: Sawdust, wood resin, and pitch buildup can cause uneven heights or feeding jams. Grooves act as evacuation paths, allowing fine dust and pitch to fall away from the main bearing surface. Pgedpfx Absz Dnt Iouou Wax/Lubricant Distribution: When paired with an automatic or manual bed lubrication system (such as table lubrication pumps), the grooves help distribute wax/oil evenly across the table rather than letting it wipe away on the first board. Common Applications Short Stock Processing: Ideal for running short pieces (such as parquet components, drawer sides, or short moulding blanks) that would otherwise struggle to maintain parallel alignment against the side fence. Cupped or Unseasoned Wood: Prevents cupped or warped boards from rolling or twisting as they hit the vertical and horizontal cutter spindles. High-Speed Feed Lines: Reduces the strain on feed rollers and drive systems by lowering bed drag during continuous industrial runs.

Condition: good (used), Year of construction: 1997, Weinig Profimat 23E Planing width: 230 mm Planing height: 120 mm Spindle diameter: 40 mm Pgsdpfx Abszzlpksusu Infeed table length: 2,000 mm Feed motor: 3 kW Spindle arrangement: Bottom: 5.5 kW Right: Left: 7.5 kW Top: 11 kW Bottom: 7.5 kW

Condition: used, Technical specifications: Max. planing width: 230 mm Podpezguw Usfx Abujgu Max. planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle arrangement: bottom, right, left, top, bottom Each spindle has its own motor Number of steel feed rollers: 4 Number of rubber feed rollers: 1 Diameter of dust extraction port: 2 x 120 mm Variable feed speed adjustment: YES Feed via universal joints: YES Lubrication pump for the work table: YES 1 smooth roller in the table Pressure: 6 atm. Electric lifting of the machine body Power supply: 400 V Total power: 29 kW Overall dimensions: Length: 3500 mm Width: 1700 mm Height: 1800 mm

Condition: good (used), Weinig Hydromat H23 SP (WITH CLEAVING SAWS) Maximum dimensions 160mm x 230mm 50mm spindles Motor 1: 7.5kw Bottom Motor 2: 11kw Right Motor 3: 7.5kw Left Motor 4: 7.5kw Top Motor 5: 11kw Bottom (splitting) Motor 6: 7.5kw Top Motor 7: 7.5kw Bottom Motor 8: Split motor 1: 15kw Cleaving Saw Motor 9: Split motor 2: 15kw Cleaving Saw 7.5kW feed motor. Pgedpfx Aboz S Tw Ajueu Automatic lubrication system. 11x top feed rollers 4x bottom feed rollers Anti-kickback device

Condition: excellent (used), functionality: fully functional, Four-side planer Weinig Profimat 23 ATS Working width: 230 mm Working height: 120 mm Number of spindles: 4 Spindle arrangement: Bottom – 11 kW Right Left – 11 kW Psdpfx Asy Rr Uzobujgu Top – 11 kW Pneumatic material pressure rollers Feed speed adjustable: 5-22 m/min Infeed table length: 2470 mm Feed motor: 4 kW CE certificate Extraction diameter: 4x140 mm

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, 4-sided 8-head planer. Pgjdpfevtpk Hsx Abuou head arrangement: lower horizontal, right vertical, left vertical, upper horizontal, right vertical, lower horizontal, upper horizontal, and the last universal, a new inverter and new cables were installed, smooth feed regulation. The machine has been completely renovated. Weight 4600 kg

Condition: used, Year of construction: 1980, used, in excellent condition Manufacturer: Raimann Type: K 23 Year of manufacture: 1980 Engine power: 37 kW Track width: 250 mm Cutting width: approx. 230 mm Cutting height: approx. 120 mm without pressure comb / with 110 mm Feed rate: max. 8 - 35 min, infinitely adjustable Saw blade diameter: 360 mm x 80 mm bore Shaft diameter: 65 mm Pjdpfx Aoxuv Nusbujgu Workpiece length: min. 290/750 mm Dust extraction connection: D 200 mm Space requirement: approx. 2400 mm x 1500 mm x 1600 mm Weight: approx. 2100 kg Total connected load: approx. 75 A Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition, as inspected Without warranty

Condition: excellent (used), functionality: fully functional, Weinig Profimat 23 Fortec four-sided planer Working width 230mm Working height 140mm Number of spindles 6 Arrangement of spindles Pedpfx Absumxqrjujgu Bottom 7.5kw Right Left 11kw Top 7.5kw Top 5.5kw Bottom 5.5kw Pneumatic pressures Feed speed adjustable on variator Drive on cardan shafts CE certificate

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 86573, planing height: 120 mm, spindle diameter: 40 mm, planing width: 230 mm, rotational speed (min.): 6,000 rpm, number of spindles: 6, Spindles: 6 Working width: 230 mm Working height: 160 mm Spindle 1: Bottom (4.0 kW) Psdpfx Aey Rrgkobusgu Spindle 2: Top (4.0 kW) Spindle 3: Right (7.5 kW) Spindle 4: Left (7.5 kW) Spindle 5: Top, 5 kW Spindle 6: Bottom, 5 kW

Condition: used, Year of construction: 1999, Used 4-sided planing machine Manufacturer: WEINIG Type: Unimat 23 E Year of manufacture: 1999 with infeed unit EM11 Year of manufacture: 1999 Technical data: 5 spindles (bottom, right, left, top, bottom) Total connected load min. / max. 42 kW - 126 kW Air flow rate 30 - 32 m³ / MIN Air flow rate per spindle 28 - 32 m³ / MIN Total air flow rate 8400 - 9600 m³ / H Pgedozuzdqopfx Abusu Nominal pressure 8 bar Operating pressure 6 bar Connection diameter DN 8 Machine weight approx. 3200 kg Static load (with support plates 80 x 100 mm) max. 120 N / CM² Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Weinig Profimat 23 four-sided planer Working width 230mm Working height 120mm Number of spindles 5 Spindle arrangement: Bottom 4kw Right Left 11kw Top 11kw Bottom 11kw Pneumatic material clamps Adjustable feed speed 5-22m/min Pgodpfx Abovyr Hkeuju Entry table length 2470mm Feed motor with a power of 4kw CE certificate Diameter of exhausts 5x140mm Machine dimensions 400x150x165cmH Weight 2300kg

Condition: excellent (used), Heads: -lower -right -left -right -left Spindle diameter: 50 mm 5 rollers in the table Transport dimensions: Width: 2.4 m Height: 1.8 m Length: 5 m Without a feeder. Pgedpfx Aozba E Usbuou

Condition: reconditioned (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ----- Psdpfexpn T Usx Abusgu Machine was factory overhauled by Weinig in 2024. Technical Specifications Summary (Please inquire about any additional accessories included) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically timed up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: pneumatically timed up-down glazing bead saw Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Can be used for glazing bead cutting or as a grooving machine > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with 99-program memory > Machine operation: Window package Joint control of the right spindle and the glazing bead feed via manual selector switch on the control panel > Spindles with mechanical digital display (Technical data according to the manufacturer - no guarantee!)

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Podpfoxz Hh Uex Abujgu Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: excellent (used), total width: 1,600 mm, total height: 1,600 mm, total length: 3,600 mm, Weinig Unimat 23C with 5 Spindles. Max width 230mm Max Thickness 160mm Lubrication system for bedplates 4kW feed motor 36m/min No 1.  5.5kw - Bottom 6000rpm No 2. 5.5kw - Right 6000rpm No 3. 7.5kw - Left 6000rpm No 4 . 7.5kw - Top 6000rpm No 6 . 5.5kw - Bottom 6000rpm (possible to add straight jointer here if needed). 50mm precision spindles Beam 0.55kW Full documentation included. 8x top feed rollers 140mm 4x bottom feed rollers (3x powered) Possible to supply with full mechanisation if needed. Very good dust manifold included. 1 set of 50mm tooling included. Podpoz Ezirsfx Abujgu (Additional 50mm tooling available if needed.)

Condition: excellent (used), CATALOGUE NUMBER 7890 Technical specifications: - track width 245mm - shaft width for the edger 380mm - shaft width for the multi-blade saw 320mm - max. blade diameter 350mm - blade arbor diameter for the edger 80mm - blade arbor diameter for the multi-blade saw 65mm - max. cutting height 120mm - table width with clearance 900mm - table length 1780mm – from above: - feed rollers/ejectors - smooth pressure shaft - feed rollers - smooth pressure shaft - insert for short pieces - shaft with saws - 2 smooth pressure shafts – from below: - guide - feed rollers/ejectors - track - central lubrication - laser - stepless feed speed adjustment - feed motor 1.1kW - main motor 30kW - manual lifting of the machine body Pgodpfx Abj Af Ivuouju - manual lifting of the saw shaft - dust extraction nozzle diameter 210mm - overall dimensions L/W/H 1900x1500x1800mm - weight approx. 2000kg ADVANTAGES - German production - stepless feed speed adjustment - floating blade shaft for edging - multi-blade saw sleeve included - laser - insert for short pieces - multi-blade saw, used, very good condition Net price: 55900 PLN Net price: 13000 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: ready for operation (used), working width 230mm working height 120mm 5 spindles spindles set: bottom/right/left/top/bottom spindles diameter 40mm Psdpjyxltajfx Abuegu two axes heads regulation variable regulated feeder spindles speed 6000 RPM

Condition: excellent (used), Weinig Uniplan double-sided planer Pjdpfxsrxuvqs Abujgu Planing width 220mm Planing height 15-120mm Power of horizontal spindles 2x 5.5kw Spindles speed 6000r.p.m Diameter of spindles 50mm Spindles supported on both sides Feed speed 6-32m/min Feed motor 3kw

Condition: used, Technical specifications: Max. planing width: 240 mm Max. planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 6 Spindle arrangement: bottom: 5.5 kW right/left: 7.5 kW top: 5.5 kW top: 5.5 kW bottom: 5.5 kW universal: 5.5 kW Spindles 1/4/5/6 are on separate motors Pjdpfx Aoycu R Ijbusgu Spindles 2/3 are on one motor Grooved tables Grooved rollers in the table: 2 Top steel feed rollers: 5 Top rubber feed rollers: 3 Dust extraction port diameter: 6 x 140 mm Infinitely variable feed rate adjustment Feed via cardan shafts Table lubrication pump 2 smooth rollers in the table Pressure: 6 atm. Electric lifting of the machine body Power supply: 400 V Total power: 46 kW Overall dimensions: Length: 4600 mm Width: 2000 mm Height: 1800 mm

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Pgodpfx Abju Damdeuou