Used Welding Circular for sale (6,980)

Year of construction: 1980, condition: used, Circular saw with miter cut Phedpfsixumvox Ah Uja Make KALTENBACH Type:KKS 400 M Year.ca.1980 Hydr.feed infinitely variable. Saw blade: 400mm

Condition: excellent (used), Year of construction: 2002, operating hours: 1,870 h, Tilting panel saw T 73 by Martin, equipped with 3-axis scorer and 3m sliding table Sliding table length: 3000 mm Saw blade tilting range: 0 to 46 degrees Speeds: 2800, 4000, and 5500 rpm with electronic speed display Drive motor: 5.5 kW with automatic motor brake Saw blade diameter up to 500 mm Maximum cutting height: 170 mm Cutting width up to 1100 mm, adjustable from the front via handwheel and manually movable Tilting angle and height electrically adjustable Crosscut fence with 2-point stop up to approx. 3350 mm Parallelogram cross table with digital angle display and roller Folding rip fence Extraction ports: 120 + 100 mm Sliding table can be locked in any position Pjdpfx Ahjxtvcxj Usha Handle Edging shoe 1 set of plastic saw blades with matching 3-axis scorer, freshly sharpened 3 riving knives 3-axis scorer unit, fully electrically adjustable while the machine is running 2 blade guards Miter fence for acute angles Tool compartment Emergency stop switch Operating manual CE marking The machine shows minor signs of use on the anodized sliding table. Small cuts on the sliding table have been repaired. Original paintwork, only touched up in a few places. Excellent condition as seen in the original photos. Dimensions approx. 3300 x 3750 x 1600 mm (LxWxH). Weight approx. 1950 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller."

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, warranty duration: 3 months, type of cooling: water, welding current (min.): 30 A, welding current (max.): 400 A, For sale: OTC DP400 30-400 AMP 50% ED 400A 60% ED 365A 100% ED 283A 400 Volt Water-cooled Pulse Synergic 2/4 Step 4 Roller drive Pre gas Post gas Start current End current Spot welding Fixed programs Program memory Steel – Stainless Steel – Aluminum weldable Refurbished, serviced, & tested Production date: 2007 Including PRO5000 Welding torch, earth work lead with clamp, gas cable, and 3 months warranty. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Podpfoxz Av Iex Ah Ueha Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Kölle Formatic Panel Saw - Year of manufacture: 1997 - 5.5 kW motor - 400 Volt - Weight: 1050 kg - Overhead control panel - 4 speeds - Electric lifting, lowering & tilting Phodpfox Ha Rvex Ah Uea - Digital display for fence - Cutting width 1 m right of the blade - Brake motor - 2800 mm - Cutting height 145 mm without scorer

Condition: used, Year of construction: 1991, saw blade diameter 275 mm cutting diameter 90 mm cutting speed 80 m/min EISELE Miter Circular Saw VMS 120 Saw blade diameter: 275 mm Phodpfx Ahex Avtvo Uja Cutting capacity at 90° (round): 90 mm Cutting capacity at 90° (rectangular): 75 × 75 mm Cutting capacity at 45° miter (rectangular): 75 × 75 mm Saw blade speed: 40 / 80 rpm Drive motor: 380 V, 1 / 1.2 kW Required floor space: 700 × 600 × 1580 mm Weight: approx. 180 kg

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Working range round: 90° max.:150 mm Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab Phjdpfx Aeuiy Nyoh Usa Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice - Delivery and installation on your premises - Training of your employees

Year of construction: 1999, condition: excellent (used), Welding machine make DALEX Type:VARIO MIC 400L year 1999 in very good condition, little used. Podsfgvvaepfx Ah Usha

Condition: excellent (used), Saw blade Ø: 370 mm Cutting capacity at 90° round: 120 mm square: 100 mm rectangular: 180 x 100 mm at 45° round: 120 mm square: 100 mm at 60° round: 110 mm square: 90 mm 2 saw blade speeds: 15/70 rpm Drive motor: 400 V, 1.8/2.2 kW Required space: 1000 x 1000 x 1800 mm Weight: 390 kg Podjx Ek A Tepfx Ah Ueha

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, warranty duration: 24 months, type of cooling: water, welding current at 60% duty cycle: 430 A, welding current at 100% duty cycle: 360 A, welding current (max.): 500 A, For sale: Kolarc XM500 500A 40% ED 430A 60% ED 360A 100% ED 400 Volt +- 10% Water-cooled Pulse Double Pulse XRoot XDeep Position XStabil XCold 406 Fixed programs Program memory 4 Roller drive New Including 4 Meter PRO5000 MIG/MAG Welding torch, 5 Meter 50mm² earth work lead, gas cable, and 10 Meter interconnection hose. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. Psdpsxziliofx Ah Uoha You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Panel saw F90 - Sliding table length: 3800 mm - Year of manufacture: 1981 - 800 mm right of the blade - 7.5 HP - 400 mm saw blade diameter - Margin scheme taxation Phjdpfox E A Tkox Ah Uea

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Double edger and trim circular saw with electronic control, consisting of: RET alignment and infeed table. Chain bed in front of the machine with liftable and lowerable pressure roller. Laser unit. DK 90 L 1000: Passage width 1000 mm. Cutting height 125 mm. Feed speed frequency-controlled up to 100 m/min. Automatic roller height adjustment with roller pressure. Width adjustment hydraulically, electronic positioning control with the following setting options: Continuously variable, cm indexing, and switchable to 2 cm indexing. Cutting width between flanges 24 - 440 mm. 10 adjustable fixed dimensions, direct input in mm. Constant dimension allowance, shrinkage allowance (percentage). Splitter wedge pair: 1 x zero line, 1 x independently hydraulically adjustable with electronic positioning control. Phjdpfjwn D Izsx Ah Uoa Splitter wedge opening 48 - 600 mm. Chain bed on the outfeed side. Motor 90 kW with power belt drive. Hydraulic unit. Chip separator ASV DK II with 2 separating lamellae. Electrical cabinet with power section and PLC control. Control panel. Lath clamping sleeve 403 mm clamping length. Adjustment and zero sleeve. Professionally dismantled and loaded onto truck, free of charge.

Condition: refurbished (used), Year of construction: 2024, Overhaul year: 2024 Saw blade max. carbide 500/550 mm Drive power saw motor: 6 KW Saw motor speed in 6 stages: 2400- 3200 min-1 Saw blade cutting speed (500-550 mm): 3800 - 5500 m/min Saw blade feed steplessly adjustable 0-40 mm/s Saw height control infinitely adjustable fully electronic Working area square 90° max.: 160 x 160 mm Working area flat 90° max.: 380 x 60 mm Working area round: 90° max.:165 mm Feed length: 10-9999 mm Feed speed AC servo max. 400 mm/s Compressed air connection on site 6 bar Weight(saw)approx.:2850 kg Dimensions LxWxH(saw)approx.:2900mm x 1725mm x 2200mm Footprint LxW 2900mm x 1725mm The machine is in mint condition, both technically and visually, after a completed retrofit. Thanks to its equipment and design, the machine can be used very efficiently for a wide range of applications. The positioning system ensures simple and very profitable operation of the machine. Thanks to the powerful motor, short cycle times can be achieved even when sawing thick-walled profiles or solid materials. The soundproof cabin reduces noise emissions to a minimum. The machine is generally overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - Replacement of the ball screw - Replacement of servo motor and servo inverter - Replacement of the frequency converter for the main saw drive (optional) - New electrical components - New pneumatic lines - Maintenance or replacement of all hydraulic cylinders and valve terminals Psdpouiy Rqsfx Ah Ujha - Overhaul of the extraction system - Overhaul of minimum lubrication system - Replacement of general wear parts - Overhaul of the soundproof cabin The machine also has - Soundproof cabin - Zero point adjustment (manual) Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Chain magazine for 4/6m materials - Splitting extension (for a high-quality cut surface without return marks) - Horizontal clamping saw line - Cut stop in material feed unit - Reinforced motor 11 KW - Roller conveyors - Delivery and installation on your premises - Training of your employees

Condition: excellent (used), Year of construction: 2002, ALU-profile mitre saw Fabr.Dry Tech Podpfxjtwn E Ue Ah Uoha Type:355 MLS Year 2002. Saw blade dm.355 mm Cutting range round max.120 mm Square max 120 mm X 120 mm

Condition: new, welding current max. 200 A open-circuit voltage 14 - 24 V Pedog U Tccopfx Ah Uoha connected load frequency 230 V weight 25 kg Dimensions (LxWxH) 500 x 200 x 300 mm Equipment: Hose package Ground cable Welding nozzles

Condition: refurbished (used), functionality: fully functional, warranty duration: 3 months, type of cooling: air, welding current (max.): 250 A, For sale: Lascentrum Multimig 250-3 Dual Pulse 250 AMP 400 Volt Gas-cooled Pulse Double Pulse Synergic 2/4 Step 4 Roller drive Steplesly adjustable Program memory Burnbacktime adjustable Stick option Steel, Inox, and Aluminum weldable Refurbished and tested Including SB360 Mig welding torch, earth work lead with clamp, gas cable, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Podpfexziinjx Ah Usha Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Lot of 5 units WIG welding machines ESS model Thyrotig - Thyroplasmma 250 (DC) WIG welding machines in need of repair Year of manufacture: 1991 to 1994 Output: 250 Amp. = 60% duty cycle, 195 Amp. = 100% duty cycle Phodow Hhbiepfx Ah Uea Current type: DC Mains connection: 400 Volt, 50 Hz, 32 Amp plug - High-voltage ignition - 2-stroke and 4-stroke operation modes - Water-cooled - Some parts missing - Delivered without torch sets/hoses, scope of delivery as pictured Space requirements (L x W x H): 1200 x 570 x 920 mm Weight per welding machine: 255 kg Total weight for all 5 machines: 1,275 kg Three machines are operational. Two were kept in storage as parts donors. The units are no longer tested and are being sold as in need of repair.

Condition: new, Year of construction: 2026, load capacity: 3,000 kg, Top quality made from high-strength structural steel Q355, including plasma nitriding and scaling. 3D perforated table 2400 x 1200 x 200mm, 100mm grid, plate thickness 20mm, hole diameter 28mm. Machined flat, very robust, weight approx. 950 kg. With table leg adjustable in 4 positions. Price excludes accessory set, surcharge €500. Packed in a wooden crate, shipping on request. Phedpfx Ahjx Nih No Uea

Condition: used, Year of construction: 1999, cutting diameter max 400 mm mit Sägeblättern Podpfx Ahow Sygms Ueha weight of the machine ca. 1,4 t

Condition: good (used), Max. welding current: 400 A Stepless adjustment range at 60% duty cycle: 305 A at 100% duty cycle: 236 A Phedpfx Ahox Ea Txs Uea Electrical connection: 400 V Required space: 800 x 500 x 630 mm Weight: 150 kg

Condition: good (used), Year of construction: 2003, functionality: fully functional, Length of sliding table: 3,000 mm Cutting width at rip fence: 1,000 mm Cutting height with blade diameter 450 mm: 75 - 150 mm Cutting height with blade diameter 350 mm: max. 100 mm (each at 90-degree blade position) Double carriage on steel round guides, no Pertinax Reinforced main saw motor: 7.5 kW Maximum saw blade diameter: 450 mm Height adjustment of the saw unit via dimension input on the control panel Motorized tilt adjustment of the saw unit via dimension input on the control panel Supplied with newly installed 350 mm saw blade 2-axis scoring saw unit, can be set in the control system to desired height and alignment relative to the main saw blade Scoring unit automatically lowers below table level when not in use Adjustment of the scorer can be done while the machine is running RAPIDO scoring saw blade – simplifies scoring width adjustment, set up in max. 3 minutes Adjustment range: 2.8 – 3.8 mm Additional accessories: - Mitre fence extendable to 3,200 mm, with 2 foldable stops - LASER cutting line indicator, e.g. for trimming cuts on solid wood planks Psdpjx Dax Esfx Ah Ueha

Condition: excellent (used), Year of construction: 1977, Panel saw Scoring unit Year of manufacture: 1977 1250 mm to the right of the blade 2800 mm cutting length 5.5 kW Dimensions approx. 2800 x 1200 x 950 mm Weight approx. 900 kg Podjwc Svpspfx Ah Ujha Not tiltable

Condition: used, functionality: fully functional, Equipment: documentation/manual, type plate available, Manufacturer: EWM Psdpfox Nc Hrex Ah Usha Model: Phoenix 500 TG Expert With Drive4 WE wire feeder and COOL 71 U41 cooling unit (filled with antifreeze) Mounted on a trolley with bottle holder. Includes manual. Machine can be demonstrated on site. All information provided without guarantee. Subject to prior sale.

Condition: new, Year of construction: 2026, overall weight: 1,000 kg, Top quality 3D perforated table 3000 x 1500 x 200 mm, 100 mm grid, plate thickness 20 mm, hole diameter 28 mm, surface machined, very robust, weight approx. 950 kg With table legs, height adjustable in 6 steps Price without accessories, surcharge €500 Packed in wooden crate, shipping upon request Pedpfxox Nihie Ah Usha

Condition: good (used), functionality: fully functional, load capacity: 300 kg, Equipment: foot remote control, Welding positioner KT 600, Horizontal load capacity 600 kg, tilted 300 kg Power supply AC 380V, 50 Hz Drive motor AC 400W Table diameter 700 mm Height 700 mm, width 800 mm, length 800 mm Weight 155 kg Infinitely variable electric tilt 0–90° Speed 0.1–2.0 rpm Max. welding current transmission 400 A Includes hand and foot remote control Phedjxxvwtepfx Ah Uja Optional at extra cost: Quick-change 3-jaw chuck Diameter 400 mm, €550 CE mark/approval

Condition: new, 3D perforated table 2400 x 1200 x 200mm, grid 100mm, plate thickness 20mm, hole diameter 28mm, Plan machined, very solid weight approx. 950 kg With table base Pjdpfx Ahovm Dk Ij Ujha Price is without accessories