Used Welding Fumes Extractors for sale (6,237)

Year of construction: 1999, condition: good (used), DISA dust extraction, welding fume extraction, self-cleaning cartridge filters, pneumatic filters, vacuum filters for plasma, laser, sandblasting, soda blasting, shot blasting, plastics and catalysts, mineral processes and all kinds of dry dust. The filter is cleaned pneumatically with compressed air impulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Highly durable filter cartridges resistant to moisture. Aluminized, antistatic, operating temperature up to 135 degrees celsius. Fan power 11 Kw Efficiency up to 8000 m3/h. Vacuum up to 4300 Pa Filtration surface 128 m2 Lrjdpohqd Tvsfx Aa Ijl

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0001, Offer 24587 Technical data: - Electrostatic filter with control light - Exhausted and cleaned air is recirculated to the work area Lredpfx Aaewn Egrs Ijl - Wall-mounted version with two jointed extraction arms - Jointed arm length approx. 9000 mm - Air volume flow approx. 4700 m³/h - Active filter surface 9.2 m² - Drive - Fan 400 V / 0.75 kW - Space requirement approx. W 700 x H 1600 x D 550 mm - Weight approx. 120 kg

Condition: like new (used), Laser engraving, laser marking, laser welding, laser structuring, etc. 2x Ø 50 mm available on the roof side Mobile storage device Very quiet operation Simple filter handling, modular design Operating elements on the front Powder-coated, robust housing Installation of extraction arms Lredpfxorypcdj Aa Iol Volume flow control: stepless adjustment of the suction power Particle filter occupancy indicator: visual signaling SUB D9 interface: standard equipment, remote I/O, operating message, 100% filter Dimensions W x D x H: approx. 1400 x 1200 x 2000 mm Weight: approx. 35 kg

Condition: used, Year of construction: 2012, type of input current: three-phase, filter area: 62 m², suction capacity: 2,500 m³/h, negative pressure: 9,000 Pa, Dust extractor, welding fume extractor, self-cleaning pneumatic filter, vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. Large filtration area requiring minimal space. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters, it causes minimal pressure loss. Short bursts of compressed air during the filtration process provide effective filter cleaning. Fan power: 7.5 kW Capacity: 2,500 m³/h at a pressure of up to 9,000 Pa Filter cartridges: 11 pcs Filtration surface: 62 m² The device is equipped with an automatic system for impregnating cartridge filters. The extractor is designed for special applications where the filtered fumes and dust may be moist and sticky. Adding impregnating agent captures moisture from the fume, protecting the filters from clogging. In this case, the lifespan of the cartridge filters is increased. Lsdjxrpmzopfx Aa Isrl Stock number: 0981

Condition: new, The powerful, mobile welding fume extractors AL-KO CLEAN UNIT F are the ideal solution for extracting welding fumes during manual welding, at automated welding stations, or with welding robots. Lrsdpfx Aajwwkvqj Ijl Function: The welding fumes generated at the welding site are captured via extraction arms and hoods, among other means, and conveyed through a duct to the inlet of the AL-KO CLEAN UNIT F. In a large pre-separation chamber, coarse particles are first separated out. The subsequently arranged filter cartridges of dust class “M” filter out the remaining fine dust particles. During extraction operation, the differential pressure-controlled filter cleaning system removes adhering particles from the filter cartridges. Venturi nozzles on the filter cartridges maximize the cleaning efficiency, ensuring consistently high suction power and a long filter service life. A volumetric flow monitor continuously controls the required suction capacity and issues a warning if the nominal value is undercut. The collected dust is gathered in an easily mobile container. The cleaned air is recirculated into the room via the top of the unit. Applications: - For all welding applications with unalloyed or low-alloyed steel - Usable as extraction at individual welding stations and at duct systems with several extraction points - Extraction at fixed-position hoods and welding tables Advantages: - Consistently high suction power thanks to an efficient fan and long-life cleanable filters - Extremely quiet due to high-performance sound insulation - Suitable for individual welding stations and for connection to duct systems - IE3 motors for high energy efficiency - Wide performance range - Optional accessories for various welding applications

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, type of input current: AC, overall weight: 45 kg, input voltage: 230 V, total width: 4,064 mm, total length: 7,366 mm, total height: 6,604 mm, filter area: 5 m², suction capacity: 180 m³/h, pressing: 36,000 Pa, power: 1.5 kW (2.04 HP), The device has seen little use and is in very good condition and fully functional. Specifications The ClearO2 W100 is designed to complement the 8XE MIG and 8XR MIG cobot extractors from Translas. With the combination of the welding fume burners of the 8XE MIG and 8XR MIG cobot extractors and the ClearO2 W100 devices, we capture between 90% and 98% of the welding fumes at the source and filter them with an efficiency of > IFA 99.8%. The compact device is perfect for relocation in the workplace due to its low weight - only 45 kg - and its four wheels, two of which are lockable. Lrsdpjvpgkcofx Aa Iel Automatic cleaning The ClearO2 W100 device has an automatic cleaning function by reverse compressed air pulse. As soon as the negative pressure in the filter is too high, the device automatically starts cleaning the filter. A manual cleaning function can be performed by pressing a single button. The automatic start/stop function to save energy and synchronize the device with the 8XE MIG and 8XR MIG Cobot extraction units is standard on the ClearO2 units. As soon as the gun is removed from the specially designed torch holder, the machine starts working automatically. Continuous duty motor The unit's electric motor is designed to work continuously without losing power. Thanks to the automatic cleaning function and simplified motor system, the maintenance of the unit is minimal, making it durable and time-saving. With a filter area of 5 m², this is one of the most efficient units of its size with the largest filter. The filter is disposable and has an active surface with an efficiency of: IFA >99.8%. Lightweight and mobile The ClearO2 W100 units are designed to meet the needs of a single welder who needs to change his workplace. Examples of such applications include shipbuilding, wind tower construction, tank building and other similar manufacturing industries. The four wheels with two locks and the low weight - only 45 kg - allow the welder to easily move the device to the next work location. [Source: translas]

Condition: new, Year of construction: 2025, functionality: fully functional, suction capacity: 1,100 m³/h, Welding Fume Extraction, Dust Extraction, Self-Cleaning, Pneumatic with Vacuum Filter. This unit is designed for the extraction and purification of dry dust generated during welding, grinding, polishing, casting, and cutting of metals and plastics. It features a three-stage filtration system with integrated primary filter element regeneration. Contaminated air passes through a metal pre-filter (spark arrestor), a main filter cartridge, and a discharge filter made from activated carbon-impregnated fleece. The regeneration of the main filter element, which utilizes compressed air to clean the filter cartridge from accumulated contaminants, is equipped with its own 10-liter compressed air tank. The unit is recommended for applications requiring continuous extraction and filtration of airborne pollutants. Extraction arms with a reach of 3 or 4 meters are recommended as accessories. The illustrated EC model is characterized by the following features: - Fan with brushless EC motor and 0.78 kW inverter, sound-insulated - Advanced next-generation EC motor design – ensures energy efficiency, precise speed control, and quiet operation - Reliable induction motor – robust and reliable solution that guarantees high performance and trouble-free operation even under demanding conditions Maximum Capacity: 1,100 m³/h Automatic filter cartridge cleaning Self-supporting extraction arm (L = 3.0 m, d = 160 mm, hood diameter 315 mm) Three filtration stages: • Coarse pre-filter (30% metal content, G2) • Main cartridge filter with 99% separation efficiency for particles ≥ 0.5 µm • Coarse final filter (70% activated carbon, G4) PTFE membrane filter (filter class F9) Coarse dust container below pre-filter Grid and dust container below main filter Welded steel enclosure with powder coating Noise level: 64 dB(A) Various configurations available to meet customer requirements. Applications: - Welding shops - Metalworking industry - Grinding and polishing stations - Plastics processing and machining This unit is ideal for environments that require constant and effective filtration of dry dust from the air. Lodponabuzofx Aa Ijrl Made in Poland. The listed price applies to the model shown. Machine warranty: 12 months

Condition: used, Year of construction: 1994, filter area: 250 m², suction capacity: 7,500 m³/h, Dust extraction, welding fume extraction, filter ventilation, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust absorber. Donaldson Torit model: 3DF12 cyclopeel - with pre-separator Cartridge filter inserts cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. The fan is placed behind the filter on the clean side, which reduces the risk of explosion to a minimum. Cartridge filter inserts. Fan with a power of 5.5 Kw Ljdpewgknxefx Aa Ijrl Max efficiency 7500 m3/h Filtration surface 250 m2 12 filter inserts inlet diameter - 315 mm Dimensions: filter unit: width - 2.15 m x 2.25 m height - 3.15 m control cabinet: length - 1.20m width - 0.80m height - 0.40m fan: length - 1.20m width - 0.80 m height - 1.20m stock no.: 0988

Condition: good (used), Year of construction: 2017, suction capacity: 16,600 m³/h, negative pressure: 5,600 Pa, Dust extraction, welding fume extraction, patron filter self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side which reduces the risk of explosion to a minimum. Brand: Donaldson Torit DCE Model: DFO4-24 Year of production - 2017 Cartridge filter cartridges, oval - DFO ULTRA-WEB FR - 24 pieces Filtration area of 430 m2 45 Kw fan. Fan model : ART 631 N4T Ljdottah Ujpfx Aa Isrl Built-in frequency converter and RITTAL SK 3305540 control cabinet air conditioner. Capacity 16600 m3/h Inlet diameter - 1 x 350mm , 2 x 300 mm Dust emptying cell sluice. Comes with a silencer and technical and electrical documentation. Also on offer on request new filter cartridges tailored according to the purpose of the device.

Year of construction: 2024, condition: new, functionality: fully functional, Professional mobile filter device for extracting welding fumes with a powerful extraction arm Lrsdpfx Aajvnzwzj Isl Suitable for welding processes MMA MIG MAG TIG plasma cutting Extraction capacity max 2500 m3/h Extraction arm length 3m Motor power 1.1 kW Connection voltage 230 V / 50 Hz Sound pressure level approx. 73 dB(A) Filter area approx. 14 m2 Powder-coated sheet steel housing with wheels and handles. Digital control panel with alarm log, operating hour counter and filter monitoring. The electronic circuit board is separate and protected from the air flow. High-performance fan located downstream of the filter in a separate soundproof compartment. Spark protection filter built into the device as original equipment. A set of activated carbon filters (10 kg) can be used on request, which are particularly required for SOV/VOC, stainless steel and galvanized steel.

Condition: excellent (used), Year of construction: 2017, type of input current: DC, KEMPER Dusty welding smoke extractor + 10 meter suction pipe + exhaust welding gun Holch 350-SC. 3.5 meters Kemper Dusty welding fume hood Suction power - 260 m³/h suction pipe: 10 meters Holch 350-sc 3.5m suction welding gun Filter mode - Cleanable filter Filter cleaning method - Manual Filter surface - approx. 1.35 m² Ledemxklhopfx Aa Ijrl Motor power - 1.6 kW Power supply - 1 x 230 V / 50 Hz Filter type - Filter cartridge Filter material - ePTFE membrane Filter efficiency - > 99.9 % Dust classification - M Basic data Dimensions (W x H x H) - 300 x 300 x 690 mm Weight - 24 kg Rated current - 8.7 A Noise level - 74 dB(A) Further information Fan type - Suction turbine Hose connection - ~45 mm x 2

Condition: like new (used), functionality: fully functional, Bofa AD Oracle iQ fume extractor, air filter, dust collector for laser or other. In new condition, with new filters. Manufacturer: Donaldson Bofa Type: AD Oracle iQ Voltage: 115-230V Unlimited airflow (+/- 10%): 410 m3/h Lrsdpoxf Didjfx Aa Isl Adjustable airflow range: 100-380 m3/h Pressure (+/- 10%): 95 mbar Dimensions (H x W x D): 975 x 455 x 505 mm Weight (+/- 5%): 65 kg Noise level:

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18133-00 12632868, input voltage: 400 V, Nederman ventilation unit for extraction of paint dust, oil mist, and contaminated air Ljdpew Hw Dgofx Aa Isrl

Condition: used, Year of construction: 2014, Exhaust fan model: HERDING COMP 1500-8/9 SB – 4 identical units Year of production: 2014 good condition Price: 5,000 euros/unit Lrodswu Dnbspfx Aa Isl

Condition: not inspected (used), functionality: unexamined, total height: 1,000 mm, total width: 800 mm, total length: 1,100 mm, overall weight: 150 kg, No reserve price – guaranteed sale to the highest bidder! Lrodpfx Aaey D Nqao Iel By placing a bid, you commit to collecting the items within the period from 23/06/2026 to 26/06/2026! Auction of an ELEKTRA BECKUM electrode welding machine & an oxy-fuel welding unit! MACHINE DETAILS Dimensions (L x W x H): 1,100 x 800 x 1,000 mm Weight: 150 kg Note: The gas cylinders pictured are not included in the scope of delivery. External reference: 17

Year of construction: 2019, condition: used, Empty weight: 5.700 kg Carrying capacity: 10 kg GVW: 5.710 kg Length: 51 cm Lifting capacity: 10 kg CE conformity: yes Welding robot: Panasonic Professional, high-quality 6-axis welding robot cell with extensive external axes configuration, ready for production immediately. Highlights: - Robot: Panasonic TM-1800WGH3 6-axis industrial arc welding robot - Controller: Global Controller G3 with Auto Calibration System - Welding source: Built-in 450A multipurpose power supply with SP-Mag/Hyper Dippulse technology - Cooling: Water-cooled welding torch (VWP-R QE series) with quick disconnect + compressor cooling - External shafts: - 2 × Panasonic 2 kW motor - 5 × Panasonic 3.5 kW motor - Full controller + PPS Program Protection System - Extras: - Teach pendant with reel (10m) - Extended cable sets (up to 12m) - 16 I/O interface - 2 emergency stop units - Light screen functionality - Ethernet RCU software + memory expansion Welding fume extraction: Teka Equipped with: an ARC-EYE laser system Servo-controlled robot shifter with suspension HLVP-VP X-axis: 45,000 mm (45 meters) Z-axis: 2,450 mm (2.45 meters) Y axis: 2,200 mm (2.2 meters) Robot: Panasonic TL-1800 TAWERS WG3 6-axis, reach approx. 1,801 mm, payload 8 kg Controller: YA-1ZAR81EH9 / YA-1ZCR81EH4 (2018) with extended software options System: XYZ-track configuration with long rail (X axis), vertical Z-shifter Positioners: Otten OD-10 000 10 ton payload, own weight approx. 5,708 kg per positioner Seam tracking: ARC-EYE laser seam tracking (Circular Scanning Sensor) with associated software Welding material: Flux-cored wire from large drum with advanced wire feeder Welding fume extraction: TEKA Filtercube 4H (5.5 kW, 400 V, W3-certified, year of construction 2019) Additional software: Gantry Pair Function, Touch Sensor, Synchronous Weaving Low-Pulse, Additional Memory, ARC SENSOR 2 x rotary table/positioner Otten OD-10 000 Load capacity: 10 tons weight: 5700 kg each year of construction: 2019 Length of track welding robot: 22.30 meters Equipped with safety gates Overall length: 51.5 meters Overall width 7.5 meters Total height of welding robot: 6 meters Workpiece table: Dimension: 16500x1950 mm Maximum load capacity: 5500 kg Own weight: 7400 kg Equipped with 5 movable attachments Manual available: Auction by tender of the production line of KSK GmbH at Schwerte (DE). The site was active within component production for the mobile crane industry and specialized in the production of heavy, welded steel components and long-form structural parts. Among the products processed within KSK were high strength steel grades such as S690QL, S960QL, S1100QL and S1300QL. Lsdpoy T Epkofx Aa Iorl The online auction opens Wednesday 6 May and closes Tuesday 9 June. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike...

Condition: used, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 730 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 12 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 3,000 W, input frequency: 50 Hz, laser wavelength: 1,080 nm, continuous power: 3,000 kW (4,078.86 HP), Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine AIRTECH 3 kW – State-of-the-Art Technology for Efficient Sheet Metal Welding Discover the smart and powerful solution for precision laser welding: the Airtech Handheld Laser Welding System with 3,000 Watt capacity! Ideally suited for demanding sheet metal processing – efficient, safe, and highly versatile. Highlights and Features: - Output power: 3,000 watts for superior weld quality and speed - Laser wavelength: 1080 nm, continuous operation with modulation frequency up to 20 kHz - Handheld laser welding head – ergonomically positioned for comfortable operation - Robust housing and intelligent internal structure for maximum service life - Touchscreen display for intuitive operation Ljdjy R I Tgepfx Aa Ierl - Optional automatic multifunctional wire feeder - Safety features: three-color alarm, safety interlocks, safety mechanism against incorrect operation - Cooling via separate water circuit with 13-liter tank capacity - CE-certified components meeting European standards Your Advantages: - Safe operation thanks to comprehensive safety mechanisms and alarm systems - Flexible applications, including automatic wire feeding and robot integration - Low operating costs and easy maintenance thanks to well-designed technology and durable components

Condition: good (used), Year of construction: 2017, functionality: unexamined, We offer this well-maintained Förster Welding Systems 4225 railing welding fixture, year 2017. Lodpfjy N A U Aex Aa Ierl Manufacturer: Förster Welding Systems Model: 4225 Year of manufacture: 2017 Condition: good Category ID: 96 Type ID: 2257 Machine type: railing welding fixture If you have any questions or need more information, feel free to send us a message or call us.

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Lrsdpfsxfrv Eex Aa Isl Coevorden, Netherlands

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Friction welding machine from MTI, equipped for welding turbochargers. The machine is equipped with: - Siemens PLC, CPU 315 - Rexroth hydraulics Lrodpjv Uzf Eefx Aa Iel - German user interface - CE Upon request, this machine can also be converted for many other welding tasks.

Condition: good (used), Table size:1500x1500mm Capacity : 6t Dimension: 1600x2500x2000mm Hydraulic Lredjfvqmxepfx Aa Iel

Condition: like new (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, arm reach: 1,437 mm, For sale: Panasonic robotic TIG welding workstation purchased from ValkWelding. Workstation includes: Panasonic TM 1400 G3 robot (6 axes, reach 1437 mm, payload 6 kg), two-axis L positioner PD1000/500, TIG welding unit Tetrix 352 AC/DC Synergic CW, accessories, and safety equipment. This workstation is distinguished by its ability to safely weld not only steels and stainless steels but also aluminum. The process is highly synchronized with wire feeding and is capable of seam tracking and adapting to changes in arc height. A very versatile device. I am selling this system because our original capacity expectations have not been met (we don’t have work in the hundreds or thousands of pieces). Over its entire lifetime (approximately 5 years), the workstation was powered on for around 200 hours and did actual test welding for less than an hour in total. It is practically in like-new condition. It would be a pity for it to just “collect dust.” Lrodpfjy Efmgjx Aa Ijl All support has been directly provided by ValkWelding. In case of sale, they will arrange installation, commissioning, and personnel training as agreed.

Condition: ready for operation (used), Heavy duty cyclone extractor 11kw fan , automatic retarder , fine dust filter Lrjdpfx Aex N Hrfea Ijl

Condition: not inspected (used), functionality: unexamined, total height: 860 mm, total length: 2,000 mm, total width: 1,000 mm, overall weight: 1,500 kg, hole diameter: 16 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates you to timely collection, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Number of holes: 800 Hole diameter: 16 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,000 x 860 mm Weight: 1,500 kg EQUIPMENT Lot clamping devices Lredpjym Rytsfx Aa Iol External reference: CES - Lot 91

Condition: new, Year of construction: 2026, Equipment: documentation/manual, Laser welding machine with 3 kW laser power, laser components from Siemens - welding machine with genuine CE and therefore also German manual, risk analysis and everything that is required to be able to operate a laser welding system in Germany. Wire feed case, also with genuine CE, is also included in the delivery. An introduction can take place here in the company. Lsdpfx Aaen Sl D Re Isrl