Wall-mounted welding fume extraction

PLYMOVENT MF 3002-4700

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 Iedod N H A Nspfx Ag Uoau feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 3 mm, overall weight: 15,000 kg, input voltage: 400 V, bending angle (max.): 180 °, working length: 3,200 mm, working range: 3,200 mm, Equipment: documentation/manual, safety light barrier, Technical features: Year 2013 Working length 3200 mm Maximum sheet thickness (iron 400 N/mm2) 3.00 mm Iaedpfjwq Rumsx Ag Ueu Maximum sheet thickness (stainless steel) 2.00 mm Maximum sheet thickness (aluminum) 4.00 mm Maximum bending height on four sides 250 mm Upper jaw stroke 650 mm

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Ijdpfx Agjv Erkae Uoau Cutting width: 1350 mm Parallel stop via handwheel Standard cross table for length stop for angle cuts Length stop analogue with continuous system Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts T 6670-a Length stop analogue T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg - available immediately - Some of the pictures show options that are not included in the offer.

Year of construction: 2024, condition: new, Motorized guillotine shears Technical data Cutting capacity: 2,5mm Cutting length: 2550mm Cutting angle: 1°40' Stroke rate/min: 35 1/sec. Motor power: 3kW backgauge range: 550mm table width: 400mm table height: 850mm height: 1260mm Iedpfxehk Nf Ro Ag Ujau width: 1350mm length: 3100mm Weight approx.: 1540kg

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 15 - 70 U/min total power requirement 1,8/2,2 kW weight of the machine ca. 0,71 t dimensions of the machine ca. 1,9 x 1,45 x 2,1 m ACTION PRICE!!! High-performance vertical circular saw hydropneumatic fully automatic.(20192) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable Iajdpod Iin Hjfx Ag Uju · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade protective hood MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: new, Year of construction: 2026, ⭐️ CAPACITY FROM 1 TON TO 100 TONS ⭐️ ⭐️ DIMENSIONS – CUSTOM SIZE AGREED WITH THE CLIENT ⭐️ Iajdjwr A Alspfx Ag Uou ✅ Overhead crane, commonly called a bridge crane, eot crane, is a type of crane found in industrial environments. An overhead crane consists of parallel runways with a traveling bridge spanning the gap. A hoist, the lifting component of a crane, travels along the bridge. ✅ Usually there are include many kinds of types crane, firstly it was divided into single girder and double girder overhead crane. There are included normal type, european type, magnetic crane, grab crane, explosion proof crane, and so on. ✅ According to the different using environment and different application. We will choose the most suitable crane for customer

Condition: excellent (used), 3-phase direct current spot welding machine DALEX type PMS 11-4 G 3 Rated power at 50 % ED: 96 kVA Sec. short-circuit current: 44.5 kA Sec. open-circuit voltage: 4.72 V Ijdpfohmvawex Ag Usau Electrode force: 100-600 daN arm reach: 550 mm with add-on control cabinet according to VDE 0100 Main switch Synchronous welding control 8033 weight: 740 kg

Condition: good (used), machine/vehicle number: 5336, carrying power: 6000 kg surface plate measures: 1500 x 1500 mm dumping area: horizontal bis - 145 ° Iaodpfx Aegbt Sqog Uou turning speed: 0 - ca. 1 Upm electrical connection: 400 V, ca. 5 kW space needed: 2800 x 2350 x 3250 mm weight: 5000 kg

Condition: like new (used), Year of construction: 2022, operating hours: 10 h, functionality: fully functional, compressed air connection: 16 bar, total width: 387 mm, total length: 565 mm, total height: 1,007 mm, overall weight: 75 kg, pressure: 16 bar, operating pressure: 8 bar, noise level: 120 dB, hose package length: 7,000 mm, High-performance dry ice blasting system IC 310 S with integrated dry ice mill IS 10 (built-in fully automatic crushing device) for delicate cleaning using micro-particles up to aggressive blasting on demanding surfaces. The patented dry ice mill IS 10 allows you to reduce 3 mm dry ice pellets to 1.5 mm micro-pellets as needed, enabling you to clean even sensitive surfaces, such as polished surfaces, pneumatic and electrical lines, machine panels, or vehicle interiors. The patented, continuously adjustable dosing system operates reliably without any loss of compressed air. The working pressure ranges from 1 to 16 bar. The compressed air supply hose is 10 m long. The integrated flow system prevents freezing and subsequent clogging at the hopper outlet. The design of the tube and hose system prevents the pellets from breaking. The blasting gun is ergonomically shaped, robust, safe, and easy to use. An optional LED lamp is available for the blasting gun. The stainless steel frame and machine housing guarantee a long service life. The machine requires only minimal maintenance costs, even under the most demanding operating conditions. Iajdpfswum Svsx Ag Usu The stainless steel hopper has a capacity of 13 kg. The dry ice consumption is between 10 and 100 kg/h. Included accessories: - Round spray nozzle RN-10-08 - Flex Case II Plus nozzle case (14-piece) - External Module PAM-01 (7m hose extension) - M306 protective helmet (with comfort face shield) - Capsule hearing protection with helmet adapter - Length-adjustable air hose - Compressed air regulator with belt - 10m breathing air supply hose - Breathing air preparation unit - Ice scoop

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 12,000 W, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 15 mm, power: 12 kW (16.32 HP), warranty duration: 24 months, Equipment: safety light barrier, DURMA HD-FN 3015 fiber laser cutting system: The ideal price-performance solution. The DURMA HD-FN 3015 fiber laser cutting system is the best choice for companies looking for maximum performance and efficiency at an unbeatable price. This state-of-the-art system combines innovative technology with user-friendly operation, offering outstanding benefits for metalworking. Technical specifications Laser power: 12 kW With automatic shuttle table Maximum sheet thickness: Mild steel: 30 mm Stainless steel: 25 mm Aluminum: 30 mm Copper: 15 mm Cutting area: 3060 x 1525 mm Movement axes: X-axis: 3060 mm Y-axis: 1525 mm Z-axis: 125 mm (max. 275 mm) Metal sheets Maximum sheet size: 3048 x 1524 mm Maximum sheet weight: 240 kg/m² Speed and precision: Maximum speed X-axis: 100 m/min Maximum Y-axis speed: 100 m/min Maximum simultaneous speed: 141 m/min Maximum acceleration: 14 m/s² Positioning accuracy: ± 0.05 mm Repeat accuracy: ± 0.05 mm Main features of the system: ・Changing table: Positioned lengthwise for best access to loading and unloading systems. ・Enclosed cutting chamber: Equipped with protective glazing for maximum safety. ・CNC graphic control: With a user-friendly touchscreen for easy operation. ・Laser source: Brilase 12 kW. ・Cutting head: Automatic adjustment of the focus for precise cutting processes. ・Integrated cooling system: Ensures efficient cooling of the cutting head and laser source. ・CAD/CAM software: Enables programming including autonesting for optimum material utilization. ・Positioning laser: Supports the exact positioning of workpieces. ・Sheet metal check system: Automatic detection of the sheet metal position and dimensions for improved process reliability. ・Automatic nozzle cleaning: Ensures continuous cutting quality. ・Central lubrication: For smooth machine maintenance. ・Waste box: For a clean working environment. ・Work area lighting: Ensures good visibility during operation. ・Multi-chamber extraction system: Effective removal of smoke and particles. Iodpfx Aju E Tczeg Ueau ・Light barrier protection: Ensures safety when changing tables. ・Remote maintenance access: Facilitates remote diagnosis and maintenance.