Used Welding Smoke Extraction Systems for sale (45,249)

Condition: as good as new (ex-display), Year of construction: 2025, IE 3 motor included as standard max. volume flow up to 10,000 m³/h at the fan approx. 73 m² filter area pre-separator included as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content of 0.1 mg/m³ reliably maintained (wood dust) Models with type-tested rotary valve airlock (FSA) Tested backflow flap Integrated automatic extinguishing system 350+ P Intake nozzle 355 mm Motor rated power 15.0 kW/3Ph Voltage 400 V/50 Hz max. volume flow 10,000 m³/h Rated volume flow* 7,127 m³/h Negative pressure at Vnenn. 3,347 Pa Filter area 73 m² Chip collection volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2,361 Weight 1,074 kg Csdpfxodqzhhe Ab Dorg

Condition: new, Year of construction: 2025, Chip extraction unit ASA 1903 Mobile, with extraction unit that can be rotated by 180° For milling, planing, and sawing chips (not suitable for dust) The extraction unit can be rotated by 180°, allowing extraction from below or above Sturdy metal fan impeller Comes standard with a high-quality chassis for better stability and easy maneuvering Quick-release fasteners for filter and chip bag Fine filter bag, double-woven Dimensions and weights Chip collection volume 110 l External diameter of extraction nozzle, inlet 203 mm External diameter of extraction nozzle, outlet 1 x 100, 1 x 120 mm Length approx. 1000 mm Width/Depth approx. 500 mm Height approx. 2100 mm Weight approx. 39 kg Electrical data Credpfx Ashk S Shjb Djg No-load speed 2950 min¯¹ Power consumption 1.5 kW Connection voltage 400 V Mains frequency 50 Hz Filter Filter area 1.92 m² Noise emission Sound pressure level max. 85.7 dB(A) Volume flow Nominal volume flow 1900 m³/h Maximum negative pressure 1700 Pa Scope of delivery: Filter bag, chip bag Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Raw air extraction unit Crjdpfxshk S Szj Ab Deg ASA 203 With standard chassis Dimensions and weights Chip collection volume 175 l Nominal outer diameter of extraction nozzle inlet 200 mm Length approx. 1061 mm Width/depth approx. 577 mm Height approx. 2300 mm Weight approx. 60 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Filter Filter area 2.2 m² Noise emission Sound pressure level max. 84 dB(A) Volume flow Nominal volume flow 2500 m³/h For milling, planing and sawing chips (no dust) Significantly reduced dust content thanks to BIA-tested filter material with a high separation rate Housing parts and impellers made of high-strength special plastic Quick-release fasteners for filters and chip bags for trouble-free maintenance Robust, high-quality design Easy to move thanks to swivel casters Low power consumption Extraction units comply with dust class L Scope of delivery: Unit body with mounted fan unit Filter bag / extraction unit Chip bag / extraction unit without extraction hose

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 163 With standard chassis Dimensions and weights Chip collection volume: 175 l Nominal outer diameter of suction nozzle inlet: 160 mm Length approx.: 1096 mm Width/Depth approx.: 648 mm Height approx.: 2300 mm Weight approx.: 40 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2.2 m² Noise emission Maximum sound pressure level: 83 dB(A) Volume flow Nominal volume flow: 2200 m³/h For milling, planing, and sawing chips (no dust) Significantly reduced dust content thanks to BIA-tested filter material with a high separation rate Housing parts and impellers made of high-strength special plastic Quick-release fasteners for filters and chip bags for trouble-free maintenance Robust, high-quality design Easy to move thanks to swivel casters Low power consumption Extraction units comply with dust class L Scope of delivery: Crsdpohk S S Ejfx Ab Deg Unit body with mounted fan unit Filter bag / extraction unit Chip bag / extraction unit without extraction hose

Condition: used, This DALEX spot welding system will be auctioned off online as part of our industrial auction / machine auction follow-up auction, J&S GmbH Automotive Technology - Machine Park. Credszyf Rxepfx Ab Dog You can find this and many other items on our platform.

Condition: used, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right + left) Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table surface with one working station (without center wall): approx. 2000 x 950 mm - Table size for fixture exchange plate for welding gauge: 300 x 600 mm - Connection cable robot to control cabinet: 5,000 mm - Free-standing control cabinet with teach-in control panel (approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control unit: YZNC-OP186 - Teach pendant: JZNC-T834B - Robot: YRFL-NNA06WB - Automation by ECKHARDT, type ROBO Robot payload: 6 kg Robot weight: 180 kg The entire system is designed as a compact welding cell. Robot control cabinet is free-standing. The robot can, of course, also be equipped with a MIG-MAG welding power source. Cedpfx Abswypqlo Derg Space requirements (welding cell with robot): L x W x H 2000 x 2000 x 2300 mm Weight (welding cell with robot): 1055 kg Space requirements (controller with control cabinet): L x W x H 1000 x 850 x 1600 mm Weight (controller with control cabinet): 300 kg Total system footprint (L x W): approx. 3000 x 3000 mm Total system weight: approx. 1355 kg Good condition Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Condition: used, Year of construction: 2012, functionality: fully functional, Equipment: type plate available, The Donaldson Torit dust extraction unit DFO 4-16 can be used for welding, cutting, and grinding. It is a non-ATEX unit. The accompanying fan is an ART 632 with a 22 kW motor (non-ATEX), designed for a flow rate of 16,500 m3/h. It was previously used in one of our factories for welding fume extraction. Codpfezwclzox Ab Djrg It has since been replaced by dilution systems and is therefore no longer needed.

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr231316, Technical Data – Used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2012 Extraction capacity approx. 500 m³/h Motor output approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W x D x H) Filter stages 1. Pre-filter F5 2. Centrifugal separator 3. Post-filter F5 (optional: HEPA H13) Filtration efficiency 99 % at ≥ 1–2 µm (F9), optional HEPA 99.95 % at ≥ 0.1 µm Noise level approx. 65 dB (model WS2 similar) Accessories & Features • Compact design for installation directly on or next to CNC machines • Stand for extraction • Three-stage filtration for efficient oil and coolant mist separation • Cartridge filter optionally upgradable with HEPA kit • Easy maintenance, low-noise operation, and durable filter elements Technical data and information subject to change and error. Prior sale reserved! Crsdpfx Ajzx Rrrsb Deg

Condition: good (used), Year of construction: 2013, 1 laser system with 1 loading station, 2 nests each - Up to 4 welding fixtures - Laser power: 3.3 kW - Beam source: Trumpf Trudisk 3302 disk laser - System manufacturer: Sitec - Operating hours: approx. 70,000 h - Max. workpiece dimensions: approx. 300 x 100 x 100 mm - Larger workpieces possible - Beam guidance via laser light cable (LLK) - Laser welding with Trumpf BEO D 70 welding optics on one axis system. - Inline laser monitoring system for weld seam monitoring - Welding speeds: up to 5600 mm/min - Welding penetration depth: 1.5 mm - Welding with shielding gas possible! For aluminum or stainless steel - Fixtures can be water-cooled! - 2 rotary axes per table side, individually programmable PROGRAMMING: 4 cylinder clamping circuits per tool 10 inputs via slip ring rotary distributor 8 additional inputs per tool via radio system Inputs freely configurable via user interface (end position / part control / setup control) Clamping and release programs and part queries fully programmable via NC program No PLC programming required System fully programmable via Siemens control (G-code) Laser programmed via Trumpf TruControl and called via Siemens control (G-code). Output Guidelines Crsdpswm I H Sofx Ab Dog T 1: 2 weld seams (each 100 mm in diameter, weld penetration depth = 1.5 mm) 2 components per side of the table approx. 250 parts per hour T 2: 17 weld seams (each 10 mm in diameter, weld penetration depth = 1.2 mm) 2 components per side of the table approx. 190 parts per hour The system can be viewed live!

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 240900085, overall weight: 410 kg, total length: 1,000 mm, total height: 2,150 mm, space requirement width: 1,350 mm, Filter and extraction unit with automatic cleaning. Suitable for fume extraction during laser, plasma, and oxy-fuel cutting, blasting, welding, grinding, and powder coating. Year of manufacture: 9/2024 Model designation: 5201053763420 Serial number: 240900085 Motor: 3 kW - 400 V Number of filter cartridges: 3 Raw gas inlet: 250 mm Raw gas outlet: 300 mm Csdpfx Abszww T Tj Dorg Width x Depth x Height: 1,350 x 1,000 x 2,150 mm Weight: 410 kg Note: Excluding installation, commissioning, and transport. Subject to prior sale.

Condition: good (used), Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter -Manufacturer: Zender, filter system cartridge filter with pneumatic filter cleaning Crsdpjy R S E Hjfx Ab Djg -Inlet opening: Ø 390 mm -Outlet opening: Ø 390 mm -Note: filter unit only, without extraction fan Quantity: 1 piece available -Transport dimensions: 4000/1480/H1650 mm -Weight: 700 kg

Condition: good (used), Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, dust collectors, welding fume extractors -Manufacturer: Donaldson Torit, mobile welding fume extraction / dust collector type PT 1000 -Drive: 1.1 kW Crsdpfxjzukybo Ab Dog -Max. volume flow: 1100 m³/h -Extraction arm: Ø 165 mm x 2210 mm -Transport dimensions: 1200/620/H1645 mm -Weight: 105 kg

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: TEKA, filter system for extraction system -Type: ZPF9 -Cartridge filter: see photos -Inlet/Outlet: Ø640 mm / Ø640 mm Codszukp Aopfx Ab Dorg -Extraction capacity: up to 20,000 m³/h -Note: A filter unit only, without a suction fan, can be supplied for an additional charge. -Dimensions: 1840/1475/H2670 mm -Weight: 689 kg

Condition: new, Year of construction: 2025, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, type of input current: three-phase, volume flow: 9,000 m³/h, suction capacity: 9,000 m³/h, intake manifold diameter: 300 mm, filter area: 165 m², noise level: 70 dB, total height: 2,500 mm, total length: 1,980 mm, total width: 990 mm, overall weight: 450 kg, space requirement height: 2,500 mm, space requirement length: 2,000 mm, space requirement width: 1,000 mm, warranty duration: 12 months, Equipment: documentation/manual, 1. Product Description The Airtech extraction unit is a horizontally installable, integrated dust separation system (cartridge filter unit) equipped with multiple filter cartridges. It is designed for applications with small to medium volume flows and offers high particle separation efficiency. Main Features: - Multiple filter cartridges arranged horizontally provide a compact and maintenance-friendly design. - Particularly suitable for industrial applications where constant and reliable dust extraction is required. Your Benefits - High filtration efficiency & air quality: The multi-stage filtration effectively retains fine dust particles, contributing to cleaner air and extending the service life of your production equipment. - Compact design: The horizontal layout saves space and simplifies integration into existing systems. - Low maintenance: Easy access to filter cartridges allows for efficient inspection, cleaning, or replacement. Powerful: The 11 kW blower ensures strong suction power and stable extraction performance even in challenging applications. Delivery ex works / ex stock Crsdjxx Ia Hjpfx Ab Dog Installation and commissioning (optional): available on request by our trained technical staff. Spare parts (filter cartridges) as well as maintenance contracts can be offered separately to maximize system uptime.

Condition: good (used), Year of construction: 1994, functionality: fully functional, For sale is a mobile dust extraction unit from AL-KO, suitable for extracting wood chips and dust from woodworking machines. Technical data / Features: Manufacturer: AL-KO Model: AL-KO 100 Filter module 1 Year of manufacture: 1990 Airflow rate: approx. 2,200 m³/h Motor power: 1.5 kW Connection: 380 volts Mobile dust extraction unit Filter bag Chip collection bag Cedpozv Thqefx Ab Derg Chassis with wheels Motor protection switch with on/off button Extraction nozzle Compact and robust design Condition and scope of delivery as shown in the photos The unit is suitable as a compact, individual dust extraction system for various woodworking machines. Inspection and demonstration are possible by appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and features may vary. Errors, prior sales and changes are subject to change. All information is without guarantee.

Condition: good (used), Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, welding fume extractors Cedpfxsztwgrs Ab Derg -Welding fume extraction: welding fume extraction arm -Extraction arm: Ø 200 mm x 4700 mm -Transport dimensions: 2490/800/H290 mm -Weight: 31 kg

Year of construction: 2003, condition: used, Colour: Cream Empty weight: 1.000 kg Dimensions (LxBxH): 130 x 140 x 290 cm - Year: 2003 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Suitable for material: Metal dust - Capacity [m³/h]: 9000 - Main fan [pcs]: 1 - Main fan power [kW]: 7.5 Codpfx Aeztbwhob Dsrg - Connection diameter [mm]: 400 - Number of connections [pcs]: 1 - Options: Collection container, Control cabinet - Transport dimensions: 1300mm x 1400mm x 2900mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, volume capacity / Crsdewgi S Ajpfx Ab Deg length / mm height / mm total power requirement / kW weight of the machine ca. / t required space / m

Condition: used, Year of construction: 1987, volume capacity / Crsdpfxeyrt A Ue Ab Deg length / mm height / mm

Condition: used, Dust extraction system Manufacturer: Spänex Type: Year of manufacture: Technical data Note: The technical data and descriptions are copies of the original order confirmation from that time. The information is provided for informational purposes only and is not binding. Codpfozu Alpsx Ab Dorg

Condition: good (used), planing width: 510 mm, working width: 510 mm, working height: 200 mm, Thickness planer REX, table width 510mm, max. planing height 200mm, two cutterblocks. Crodpfxjy Sxyaj Ab Deg

Condition: used, Year of construction: 2022, Extraction system Manufacturer: Schuko Type: Solo-160-2323/30/182/BD Year of manufacture: 2022 Crjdjzu Ah Rjpfx Ab Dsg Technical data - Length x Width x Height: 2400x2400x10000 mm - Airflow: approx. 15,500 m³/h - Type of dust: Plastic, chips (dry) - Filter hose diameter: 160 mm - Filter hose length: 3000 mm - Total filter area: 182 m² - Rotary valve: 0.75 kW Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Storage location: Nattheim Credpfx Abovviyte Dsg

Condition: used, Year of construction: 2013, machine/vehicle number: 2108, functionality: fully functional, operating hours: 10,000 h, power: 11 kW (14.96 HP), input voltage: 230 V, input current: 39 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 6,000 m³/h, intake manifold diameter: 300 mm, filter area: 46 m², noise level: 65 dB, actuation type: electric, total height: 4,000 mm, total length: 2,900 mm, total width: 850 mm, overall weight: 600 kg, year of last overhaul: 2026, Equipment: documentation/manual, VACUUM SYSTEM IN PERFECT WORKING ORDER (lightly used, auxiliary system). SUPPLIED WITH 3 LARGE-DIAMETER PRIMARY HOSES AND 2 BOXES OF PLASTIC BAGS SIZED FOR THE CONTAINERS. OPTIONAL: ADDITIONAL LINERS CAN BE PURCHASED. Codszvquhopfx Ab Derg

Condition: used, Year of construction: 2008, 12 motors of 15kW Disassembled into 6 parts: Part 1: 2x Upper part with motors 4000kg Part 2: 2x Intermediate part with filter bags 4000kg Part 3: 2x Lower part with legs 2000kg Remainder: Return lines and 1x switch cabinet. Dismantling takes place on Extraction is loaded onto the truck. - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 8011510B - Suitable for material: Wood dust - Type of extraction: Underpressure installation - Capacity [m³/h]: 80000 - Nominal airflow [m/s]: 22 - Negative pressure [Pa]: 3200 - Main fan [pcs]: 12 - Main fan power [kW]: 15.0 - Number of filter bags [pcs]: 384 - Filter length [mm]: 2500 - Filter diameter [mm]: 230 - Filter surface area [m²]: 694 - Options: Fire suppression system, Control cabinet Credpfx Ajwiwpzob Dsg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels