Used Westermann Optimal 2300 for sale (4,377)

Condition: used, Used machineCutting length 3000 mmwith handwheel clampingAvailability: short termStorage location: Solingen Nsdpew I Uhdjfx Ag Tolc

Condition: used, Year of construction: 2026, operating hours: 380 h, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production run. Acceptance/initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in challenging terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER PK 23002 SH E Power Link Plus loading crane ? Suitable for assembly, lifting, and transport work in difficult terrain ? Can be used on peatlands, forest paths, routes, mountainous regions, and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Can turn on the spot OFF-ROAD CAPABILITIES ? Climbing ability up to 60% ? Side slope up to 40% ? Wading depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive surfaces ? Ideal for work off paved roads CAB ? Safety cab with ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control panel ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic articulated boom loading crane ? Endless slewing ring ? Hydraulic six-stage extension boom Performance data ? Lifting moment: 21.5 mt (215 kNm) ? Maximum lifting capacity: approx. 6,200 kg ? Maximum hydraulic reach: approx. 17.10 m ? Lifting capacity at maximum outreach: approx. 890 kg ? Precise load positioning thanks to sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection system ? HPSC stability monitoring system ? Active vibration damping ? Hydraulic winch ? Four-point outriggers Nlodpozgzavofx Ag Toc ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Specialized forestry work ? Work in peatlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in difficult-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road performance ? Safe working even under the most challenging conditions ? Economical alternative to mobile cranes in difficult terrain ? High flexibility for energy suppliers, network operators, and specialized civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the mounted PALFINGER PK 23002 SH E Power Link Plus combines maximum off-road capability with powerful crane technology. Due to its extremely low ground pressure, high payload, and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly, and transport tasks in areas that cannot be reached with conventional truck cranes or construction machines.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 31,732 h, clamping force: 2,300 kN, screw diameter: 55 mm, total height: 2,160 mm, overall weight: 12,000 kg, product length (max.): 5,871 mm, This HAITIAN ZE2300 was manufactured in 2019. It features a clamping force of 2300 kN, a platen opening stroke of 1150 mm, and a screw diameter of 55 mm. Equipped with a robot and Euromap 67 interface, it remains in excellent condition and is still in production. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN ZE2300 machine we have for sale. Contact us for more information. • Platen opening stroke: 1150 mm • Minimum mould height: 220 mm • Maximum mould height: 600 mm • Tie-bar distance: 620 × 620 mm • Platen dimensions: 920 × 920 mm • Centering ring diameter: 160 mm • Maximum injection volume: 570 cm³ • Injection nozzle radius (tip): R10 • Motor power: 47 kW • Heater power: 25 W Nodezd T S Sjpfx Ag Tslc • Number of electrical connection pins: 32 • Robot interface: Euromap 67 • Operating hours: 31,732 h • Condition: Excellent • Status: In production Additional equipment • Robot (installed)

Condition: ready for operation (used), NEC 193 250010-B-02 / (0CC) 193-230010VACAAD board, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nlodpfxsi Eb Tho Ag Toc

Condition: new, Siemens 1FK7101-2AF71-1RG1 synchronous motor, serial number YFR1641497823005, unused, in opened original packaging, 100% functional. Scope of delivery as shown in the photos. Nlsdpfx Aolq N Rxog Toc

Condition: new, Siemens 1FK7101-2AF71-1RG1 synchronous motor, serial number: YFR1641497823001, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Nodpfey T Dnfox Ag Tolc

Condition: ready for operation (used), Alsthom Parvex NFC 53 220 / AMS 2300515 Power Supply,used, minor signs of wear, 100% functional, scope of delivery as per photos Nsdpotqa T Refx Ag Tolc

Condition: ready for operation (used), Alsthom Parvex NFC 53 220 / AMS 2300515 Power Supply SN: 2411,used, minor signs of wear, 100% functional, scope of delivery as per photos Nedpfx Agetvcrto Tjlc

Condition: new, Siemens 1FK7101-2AF71-1RG1 synchronous motor, serial number YFR1641497823003, unused, in opened original packaging, 100% functional. Scope of delivery as shown in the photos. Njdpfjlq N Rujx Ag Telc

Condition: ready for operation (used), Siemens 1FT5064-0AC01-2-Z servo motor SN: E0T10002523001 - Z = G45 holding brake installed, used, good condition, 100% functional, scope of delivery as per photos, Z see type plate Nedpjuca Rwjfx Ag Tjlc

Condition: new, Siemens 1FK7101-2AF71-1RG1 synchronous motor, serial number YFR1641497823006, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Nodpfx Agelq N R Ae Tolc

Condition: ready for operation (used), NEC 193-250004-B-02 / (ESM) 193-230004 VAM AAA board, used, shows normal signs of wear, 100% functional, scope of supply as shown in the photos. Nledsi Eb Tljpfx Ag Tec

Condition: ready for operation (used), Siemens 1FK7042-5AF71-1EG5 synchronous servo motor, serial number: YFR123002201017, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Njdsi D Rhcopfx Ag Tslc

Condition: ready for operation (used), Siemens 1FK7063-5AF71-1EG5 synchronous servomotor, serial number: YFR123002204008. The item has been inspected and tested. Used, shows normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Njdpfx Agei D Rqde Tjlc

Condition: excellent (used), mileage: 970,304 km, power: 302 kW (410.61 HP), first registration: 02/2016, fuel type: diesel, tire size: 315/70 R22.5, axle configuration: 6x2, wheelbase: 6,450 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 10,100 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, fog lights, navigation system, parking heater, = Additional Options and Accessories = - (Roof) spoiler - Aluminum fuel tank - Climate control - Refrigerator - Sleeper cab - Air horn - Radio/CD player Nljdpfx Aozcxxceg Tjc - Side mirrors with electric adjustment - Communication devices - Sun visor - Digital speedometer - Power take-off (PTO) - Central lubrication system = Additional Information = General Information Cab: simple License plate: 38-BGV-8 Technical Information Number of cylinders: 6 Engine displacement: 12,742 cc Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 315/70 R22.5; Max. axle load: 7500 kg; Tire tread depth left: 10%; Tire tread depth right: 10% Rear axle 1: Tire size: 295/60 R22.5; Max. axle load: 11500 kg; Tire tread depth left: 20%; Tire tread depth right: 20% Rear axle 2: Tire size: 355/50 R22.5; Lift axle; Max. axle load: 7500 kg; Steerable; Tire tread depth left: 20%; Tire tread depth right: 20% Weights Unladen weight: 15,365 kg Payload: 11,135 kg GVW: 26,500 kg Functional Crane: Palingen PK23001-EH Maintenance APK (Technical Inspection): valid until 02/2027 Condition Technical condition: very good Optical condition: very good Damage: none

Condition: used, Used machine Used veneer saw of the company Scheer type FM 2 - 3000 Clamping by handwheel integrated suction unit Nljdpfx Ajwka Rdjg Tjc Cutting length: 3000 mm movable Availability: short term Location: Röllbach

Condition: used, Year of construction: 2026, operating hours: 380 h, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production year. Acceptance/initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in challenging terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER loading crane, PK 23002 SH E Power Link Plus ? Suitable for assembly, lifting and transport work in difficult terrain ? Can be used on peatlands, forest paths, tracks, mountainous regions and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Ability to turn on the spot OFF-ROAD CAPABILITIES ? Gradient capability up to 60% ? Lateral inclination up to 40% ? Wade depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive surfaces ? Optimal for work away from paved roads CAB ? Safety cab in ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen operating terminal ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE SYSTEM Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic knuckle boom loading crane ? Continuous slewing system ? Hydraulic six-stage boom extension Performance data ? Lifting moment 21.5 mt (215 kNm) ? Maximum lifting capacity approx. 6,200 kg ? Maximum hydraulic reach approx. 17.10 m ? Lifting capacity at maximum outreach approx. 890 kg ? Precise load positioning through sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection ? HPSC stability monitoring ? Active vibration damping ? Hydraulic winch ? Four-point outriggers ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pylon construction ? Wind turbine service ? Pipeline and pipeline construction Nodszdl R Tjpfx Ag Tslc ? Telecommunications and radio mast construction ? Forestry special work ? Work in moorlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in difficult-to-access terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road capability ? Safe operation even under the most difficult conditions ? Economical alternative to mobile cranes in difficult terrain ? High flexibility for energy suppliers, network operators and specialist civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with a PALFINGER PK 23002 SH E Power Link Plus offers maximum off-road capability combined with powerful crane technology. Thanks to the extremely low ground pressure, high payload and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly and transport tasks in areas that cannot be reached with conventional truck cranes or construction machinery.

Condition: used, mileage: 300 km, power: 231 kW (314.07 HP), first registration: 04/2026, fuel type: diesel, overall weight: 30,000 kg, gearing type: automatic, Year of construction: 2026, Equipment: air conditioning, all wheel drive, crane, TECHNICAL CONSTRUCTION DESCRIPTION KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production year. Inspection/Initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in difficult terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER loading crane PK 23002 SH E Power Link Plus ? Suitable for assembly, lifting, and transport work in rough terrain ? Can be used on peatlands, forest paths, routes, mountainous regions, and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Ability to turn on the spot TERRAIN CAPABILITIES ? Gradient climb: up to 60% ? Side slope: up to 40% ? Wading depth: up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive areas ? Ideal for work off paved roads CAB ? Safety cab in ROPS/FOPS design ? Air conditioning Njdpfozdl Sdox Ag Tjlc ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control terminal ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE SYSTEM Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic articulated boom loading crane ? Continuous slewing system ? Hydraulic six-section boom Performance data ? Lifting moment: 21.5 mt (215 kNm) ? Maximum lifting capacity: approx. 6,200 kg ? Maximum hydraulic reach: approx. 17.10 m ? Lifting capacity at maximum outreach: approx. 890 kg ? Precise load positioning through sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection ? HPSC stability monitoring ? Active vibration damping ? Hydraulic winch ? Four-point outrigger ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Special forestry work ? Work in moorlands and nature reserves ? Disaster relief and rescue operations ? Assembly and lifting work in hard-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road performance ? Safe working even under the most difficult conditions ? Economical alternative to mobile cranes in rough terrain ? High flexibility for energy suppliers, network operators, and specialized civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the PALFINGER PK 23002 SH E Power Link Plus mounted on it combines maximum off-road performance with powerful crane technology. Due to the extremely low ground pressure, the high payload, and the reach of over 17 meters, the machine is particularly suitable for lifting, assembly, and transport tasks in areas that cannot be reached with conventional truck cranes or construction machinery.

Condition: used, mileage: 300 km, power: 231 kW (314.07 HP), first registration: 04/2026, fuel type: diesel, overall weight: 30,000 kg, gearing type: automatic, total length: 8,228 mm, total width: 3,077 mm, total height: 3,375 mm, Year of construction: 2026, Equipment: air conditioning, crane, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production period. Acceptance/initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in difficult terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER loading crane PK 23002 SH E Power Link Plus ? Suitable for assembly, lifting and transport work in rough terrain ? Can be used on moorlands, forest paths, tracks, mountainous regions and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Ability to turn on the spot OFF-ROAD CAPABILITIES ? Climbing ability up to 60 % ? Side slope up to 40 % ? Wading depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive areas ? Optimal for work away from paved roads CAB ? Safety cab in ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control panel Nsdszdl R Hjpfx Ag Tjlc ? Reversing camera ? LED work lights ? GPS telemetry and fleet management system CRANE SYSTEM Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic knuckle boom loading crane ? Continuous slewing ring ? Hydraulic six-section boom Performance data ? Lifting moment 21.5 mt (215 kNm) ? Maximum lifting capacity approx. 6,200 kg ? Maximum hydraulic reach approx. 17.10 m ? Lifting capacity at maximum outreach approx. 890 kg ? Precise load positioning through sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection ? HPSC stability monitoring ? Active vibration damping ? Hydraulic winch ? Four-point outrigger system ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Forestry operations ? Work in moorlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in hard-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload combined with excellent off-road performance ? Safe operation even under the most difficult conditions ? Economical alternative to mobile cranes in rough terrain ? High flexibility for energy suppliers, network operators and specialist civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the mounted PALFINGER PK 23002 SH E Power Link Plus combines maximum off-road performance with powerful crane technology. Thanks to the extremely low ground pressure, high payload and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly and transport tasks in areas that cannot be reached with conventional truck cranes or construction machinery.

Condition: used, mileage: 74,586 km, first registration: 07/2009, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 02/2027, emission class: euro4, number of seats: 2, Equipment: ABS, crane, Very well-maintained MAN TGL 8.180 with a Cormach 23000 36-3 mounting crane featuring 3 hydraulic outriggers, a working height of 32 meters, and a maximum lifting capacity of 1,200 kg. It includes floor controls as well as a wireless remote control. The vehicle is also prepared for aerial platform operation. This is a German vehicle from a single owner and has only 74,500 km. * Cormach 23000 * 35 m - 500 kg, outreach 4 m * 32 m - 1,200 kg, outreach 7 m * 30 m - 1,200 kg, outreach 10 m * 28 m - 860 kg, outreach 12 m * 27 m - 640 kg, outreach 14 m * 26 m - 500 kg, outreach 17 m * 23 m - 370 kg, outreach 19 m * 22 m - 270 kg, outreach 21 m * Winch from 2023 * Continuous slewing range * Wireless remote control with motor START/STOP function Nljdszdcvuspfx Ag Tsc * Work platform available at an extra cost * Working height with work platform: 30 m * Lateral working radius: 21 m with 270 kg, and 10 m with 1,200 kg. * Differential lock * Self-propelled work machine * German vehicle * From a single owner Financing is possible through our partner banks, and we will gladly assist you. We expressly reserve the right to sell the vehicle prior to a formal agreement, as we are also offering this item on other platforms. The information regarding accessories is provided without guarantee. Subject to change, prior sale, or errors. We strongly recommend and encourage an inspection and assessment to ensure that the buyer does not have any false impressions regarding the condition and suitability of the vehicle. Inspections and assessments can be arranged at any time and are highly recommended.

Condition: good (used), Year of construction: 2000, machine/vehicle number: 21977-1964, Offer 26165 Technical Data - Two driven rollers, each hydraulically adjustable - For edging and conical rolling - Operation via a separate control panel, with digital actual value display - and manual operation - Max. working width 1300 mm - Max. sheet thickness at 400 N/mm² without edging - at bending diameter 370 mm, inside 30 mm - with edging at bending diameter 370 mm, inside 25 mm - without edging at bending diameter 380 mm, inside and Nedpfozf Hkdsx Ag Tolc - width of 370 mm 45 mm - Upper roller diameter each 300 mm - Side roller diameter each 310 mm - Working speed 4.5 m/min - Drive 400 V / 30 kW - Space requirement W 5800 x H 1900 x D 2200 mm - Weight 8500 kg

Condition: used, mileage: 543,854 km, power: 265 kW (360.30 HP), first registration: 06/2007, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro4, total width: 2,550 mm, total height: 3,960 mm, Equipment: ABS, air conditioning, compressor, navigation system, soot filter, Body/Conversion: - Spitzer silo body - Tank No. 13452 - Chamber 1 – 11,500 L - Chamber 2 – 11,500 L - Silu CG 600 IC silo compressor Njdpfx Aey Nupljg Tslc Equipment: - L-cab - Manual gearbox with splitter - Air conditioning - Radio - Reversing camera - Driver comfort seat with seat heating - Sun visor - 1 bed - Roof hatch - Air suspension on rear axle - 1st, 2nd & 4th axles steerable Other details: - 1 previous owner - Gross vehicle weight: 32.0 t - Payload: 19.70 t Since 1972, your reliable partner for cars and commercial vehicles in 28832 Achim, near Bremer Kreuz. NutzfahrzeugZentrum Behnke always has around 200 vehicles in stock, including vans, commercial vehicles, and construction machinery! We constantly offer attractive financing options at special rates. On request, we are happy to create a tailored offer! Trade-in of your commercial vehicle/construction machine is welcome. Should you require a new TÜV inspection, we can provide a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection. Delivery of your "new" commercial vehicle can be arranged by our external partners for an additional charge. The information provided in advertisements, online, on price tags, and in photos is non-binding and does not serve as guaranteed features. The seller accepts no liability or warranty for typing or data transmission errors. Listed features may need to be verified separately. Subject to prior sale and errors.

Condition: used, mileage: 74,586 km, first registration: 07/2009, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 02/2027, emission class: euro4, number of seats: 2, Equipment: ABS, crane, Very well-maintained MAN TGL 8.180 fitted with a Cormach 23000 36-3 assembly crane featuring 3 hydraulic extensions, a working height of 32 meters, and a maximum lifting capacity of 1,200 kg. Includes ground control and radio remote control. The vehicle is additionally prepared for platform lift operation. German vehicle from first owner with only 74,500 km. • Cormach 23000 • 32 m – 1,200 kg at 4 m outreach • 30 m – 1,200 kg at 10 m outreach • 28 m – 860 kg at 12 m outreach • 27 m – 640 kg at 14 m outreach • 26 m – 500 kg at 17 m outreach • 23 m – 370 kg at 19 m outreach • 22 m – 270 kg at 21 m outreach • Winch from 2023 • Continuous slewing range • Radio remote control with engine START/STOP function • Work basket available at extra cost Nedpfxsy Nhltj Ag Telc • Working height with work basket: 30 m • Side outreach: 21 m (270 kg) and 10 m (1,200 kg) • Differential lock • Self-propelled working machine • German vehicle • From first owner Financing available through our partner banks; we are happy to assist you. We expressly reserve the right to prior sale as this item is also listed on other platforms. Accessory information without guarantee. Subject to change, prior sale, or error. We strongly recommend and offer inspections and testing to ensure buyers have an accurate understanding of condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged.

Condition: used, ATP2300M ED:06, 112745 ED:C, Alcatel Annecy Adixen turbo pump with controller Nsdpfx Ageq S Tmwo Telc Model: ATP2300M Type: Adixen Condition: Used

Condition: used, 112745 ED:C, ATP2300M ED:07, Alcatel Annecy Adixen turbo pump with controller Model: ATP2300M Type: Adixen Condition: Used Nedpeq S Tmtefx Ag Tolc