Used Widoberg for sale (62)

Condition: new, The tube finishing machine ML75 is ideal to polish round, oval and elliptic tubes with diameters up to 76mm with tight bend radius. ML75 has a slim and compact planetary wheel which permits the operation of curved tubes. This machine can be equipped with an automatic feeding system for straight tubes finishing. This new tube finishing machine is the answer for curved tubes which are too tight to fit ML100 and with diameter too big to fit ML50. Polishing bent tubes with tight radii: The planetary wheel of ML75 has a compact design for tight curved tubes finishing with the highest flexibility. Straight tubes finishing: Although ML75 was designed mainly for curved tubes finishing, it can be fitted with automatic feeding systems in order to polish straight tubes whenever needed. Quick set-up: Simple to work with ML75 tube polishing machine. Automatic feeding is hinge mounted and easily removable for bent tube finishing. Low heat: The soft contact with abrasive belts with ML Planetary System has a very low heat on the tube surface, unlike other conventional systems. Technical Details - ML75: Nedpfx Asd Hfg Esfhjwb Working capacity (Ø mm) 10-76.2 No. Stations 1 Abrasive belt dimensions (mm) (2x) 25x860 Abrasive belt speed (m/s) 3-22 Feeding speed (m/m) 1-5 Abrasive belts motor (kW) 2.2 Wheel motor (kW) 1.5 Feeding motor (kW) (2x) 0.12 Total power (kW) 3.94 Consumption (A) 10 Dust extraction connection (Ømm) 80 Dimensions (mm) 750x1000x1300 Weight (kg) 230

Condition: new, AVAILABLE EX STOCK ! Subject to prior sale. Nwodpsd Ixbzjfx Afhsb OD tube deburring machines clean and remove sharp edges on tubes and profiles caused by sawing. Enables simultaneous outside and inside burrs removal without rotating the tube. Deburrs round, square, rectangular and many different tube and profile shapes deburring in few seconds.

Condition: new, Metal deburring and edge rounding machine – DM1100 C – performs edge rounding and removes sharp edges on both external and internal contours of stainless steel, steel or aluminium parts either cut in laser, shear or punching machine. This machine works metal parts of different dimensions including products as small as 50x50mm. DM1100 C – Metal Deburring Machine has a station with double cross belts for the metal deburring and edge rounding, leaving clean, soft and burr-free edges on the complete parts. High performance on all edges and also on internal holes. Two cross belts mounted with abrasive blocks run in opposite directions, completing edge rounding on the complete area of the part. DM1100 C can edge round parts with plastic foil, keeping the original finishing and assuring the work purely on the edges. Technical Specifications: Working capacity (mm) 1100x50 No. Cross belt stations 2 Cross belt speed (m/s) 8 Feeding speed (m/m) 0.6-3.2 Cross Belt Motor (kW) 3 Feeding motor (kW) 0.18 Total power (kw) 6.2 Consumption (A) 13 Dust extraction connection per head (Ø mm) 100 Nwodod Evcwspfx Afhsb Dimensions (mm) 2270x1560x1940 Weight (kg) 1200

Condition: excellent (used), Continuous rotary table HAU R60 - 1800, with 60 workpiece spindles, mounted in a pitch circle diameter of 1800mm, 3 polishing units with 7,5 kW each, polishing shaft diameter of 50 mm, width of polishing wheel 2 x max. 400 mm and 1 x 280 mm, diameter of polishing wheel s max. 420 mm, motorized longitudinal and height adjustment of polishing units, machine equipped with liquid compound feeding system Nwodpfx Aom Nbubofhob More pictures on demand

Condition: new, Year of construction: 2025, DM1100 Z – NEW DESIGN – at €29,800-- Deburring up to 1100mm width. The DM1100 Z refines and deburrs light metal sheets cut by laser, punching, or shearing. Nsdpfx Asimdmtsfhswb This machine is equipped with a single wide-belt station, which can be used for deburring parts ranging from 50×50 mm in size up to 1100 mm in width. The DM1100 Z is also suitable for surface finishing and can operate with both standard abrasive paper and non-woven/Scotch belts. With an additional table, the new DM1100 Z can be combined with an existing DM1100 C edge-rounding machine. We also offer a part return system for this machine.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, power: 4.4 kW (5.98 HP), Löser KS100 BA contact belt grinding machine, centerless for pipes and rods, used, with pneumatic belt tensioning, year of manufacture 1999, in very good condition Njdpfx Afsqk Uyaehswb

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1500 (maximum part processing length 1500 mm), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Nsdpfow Au A Eox Afhowb Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Nwsdpjtmqi Dsfx Afhob Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: excellent (used), functionality: fully functional, grinding width: 75 mm, power: 1.5 kW (2.04 HP), input current: 16 A, Centerless belt grinder for round tubes, GRIT GX752H + GCX + GXW - including tube support - Incl. coolant container for wet grinding Nwsdoucq Dnepfx Afhsb - including sanding area with surface belt - mobile, on a base with wheels

Condition: new, DESCRIPTION DM100 Z2C - performs edge rounding and removes sharp burrs from both the inner and outer edges of steel, stainless steel or aluminium parts after laser, shear or punch cutting of metal parts from 50 x 50 mm up to 1100 x 100 mm in size. Ekdjtxp The 1st station processes the products through a contact roller (approx. 55° shore) with an abrasive belt and removes strong burrs in the first step. The 2nd station processes the products with 2 counter-rotating cross belts each from below and from above. The cross belts round off the parts to be machined on both the inner and outer edges. A big advantage is also the deburring of products with surface protection foil, because only the edges are processed without damaging the foil. Technical data - DM1100 Z2C: Working capacity (Ø mm) 1100x100 No. of belt stations (Z) 1 No. of cross belt stations 2 Abrasive belt, dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 8-22 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Cross belt motor (kW) (2x) 3 Nweded Ixadopfx Afhsb Feed motor (kW) (3x) 0.18 Total power (kW) 33 Power consumption (A) 62 Rod suction connection per head (Ø mm) 150+185 Dimensions (mm) 3600x2330x2350 Weight (kg) 5000

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1000 (maximum part processing length 1000 mm, respectively), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + Nwodpfxew Avpts Afhjb 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: reconditioned (used), functionality: fully functional, BULA MP133 - Rotary table polishing machine make Bula, model MP 133 for sale Continuously revolving machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 8 workpiece holders mounted in a pitch circle of 600 mm. 3 processing stations, drive power per station from 4 KW, with Bula Quick Lock system of the polishing discs. Polishing shaft diameter 30 mm für BULA QuickLock Max. disc width 150 mm Max. disc diameter: 350 mm Base area approx. 1900 mm wide, approx. 2400 mm deep, 1700 mm high Nsdpfx Afewvq Ahjhjwb The machine is completely reconditioned, cleaned, sandblasted, primed and repainted. The BULA MP136 was equipped with new engines, a new gearbox and a new control cabinet. All drives are infinitely variable via frequency converters. Furthermore, the following has been renewed: bearings, belts, screws, hoods, etc. The machine is available immediately. Further technical details and price on request. Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 3 high-pressure dosing pistols WIDOBERG HDP-2, brackets, timer, etc. and pressure tank). Picture is just an example !

Condition: new, Year of construction: 2021, Table polishing machine / flat polishing machine for parts up to 3000mm length. With one or two polishing units. Basic machine and control cabinet new, polishing units used but completely overhauled with new polishing motor. Nwedpfeg D Rfmex Afhjb

Condition: new, Long Belt Grinding Machine LMD2500 incl. Deburring Tool - NEW - Delivery time on request The LMD 2500 is a long belt machine with a flexible abrasive belt that allows the processing of flat surfaces as well as corners or material edges. This machine is ideal for machining irregular shapes, removing welds and deburring and rounding laser cut parts. The flexible and and motorized height-adjustable table is perfect when, due to large dimensions, the workpiece to be machined cannot be easily moved. With the LMD2500, take advantage of the adaptability of the long belt along with different sanding tools such as sanding shoe, manual pad, and deburring brush - or disc - to finish the areas you need. - Grinding flat surfaces with the contact roller. - Stroke finishing with flat pad - Grinding of weld seams - Deburring of laser cut parts - Processing of large surfaces - Interchangeable finishing tools - Flexible deburring/edge rounding station - Pneumatic belt tensioning - Tool carrier with counterweight system - Contact roller tool Nodog I Ipkspfx Afhowb - Flat tool - Manual pad 100*80mm - Abrasive belt variable speed (8-25m/s) - Edge rounding tool - Including: o Deburring disc holder Ø150mm medium SH hardness o Grinding disc Ø150mm g120 ceramic with velcro support x5 o Surface finishing disc Ø150mm with Velcro backing o Edge

Condition: excellent (used), Rolei PEF 500 deburring and bevelling machine, basic model in interated in table (1200 x 788 mm, width x depth) made of aluminum profiles Nwodpfxjgkwckj Afhsb

Condition: new, Bowl vibrator without pneum. separating ramp - total volume approx. 40 l - diameter bowl approx. 565 mm - max. parts size 120 mm - PU-layer bottom 10 mm - PU-layer side wall 8 mm - motor 0,37 kW - motor speed 1500 rpm - total height approx. 780 mm Nwodpfx Afod I A Anohob - total weight 100 kg - incl. dosing pump - incl. conrol box with variable speed control, 1000 - 1500 rpm

Condition: new, Bowl vibrator incl. pneum. separating ramp - total volume approx. 120 l - diameter bowl approx. 852 mm - max. parts size 160 mm - PU-layer bottom 15 mm - PU-layer side wall 12 mm - motor 1,1 kW - motor speed 1500 rpm - total height approx. 890 mm Nwedpfx Afed I A Atjhob - total weight 225 kg - incl. dosing pump - incl. conrol box with variable speed control, 1000 - 1500 rpm

Condition: new, Bowl vibrator incl. pneum. separating ramp - total volume approx. 220 l Njdpfjd I Dmwex Afhjwb - diameter bowl approx. 1150 mm - max. parts size 180 mm - PU-layer bottom 15 mm - PU-layer side wall 13 mm - motor 1,1 kW - motor speed 1500 rpm - total height approx. 1100 mm - total weight 460 kg - incl. dosing pump - incl. conrol box with variable speed control, 1000 - 1500 rpm

Condition: new, Bowl vibrator incl. pneum. separating ramp Nedpfx Afjd I Dndohswb - total volume approx. 1000 l - diameter bowl approx. 1785 mm - max. parts size 360 mm - PU-layer bottom 25 mm - PU-layer side wall 20 mm - motor 11 kW - motor speed 1500 rpm - total height ca. 1550 mm - total weight 1770 kg - incl. dosing pump - incl. conrol box with variable speed control, 1000 - 1500 rpm

Condition: new, Centrifugal grinding machine / vibratory grinding machine for deburring, rounding, polishing of workpieces. Machines available with 18, 60 or 160 litres capacity. Machines incl. dosing pump, speed control and control cabinet - separating unit optional. Nwedpj T Ncmsfx Afhsb Detailed offer on request.

Condition: new, CleanMax-N Single Stage Ultrasonic Cleaners The CleanMax-N range of industrial sized single staged ultrasonic cleaners are designed to be used in industrial applications where heavy duty cleaning demands and performance are widely required. The CleanMax-N range are widely used for cleaning parts in the automotive, aviation, metal ware and many other industries where precise parts cleaning is essential prior to surface treatment or final assembly. The CleanMax-N range also offers a large amount of optional accessories ranging from pump filtration systems, oil separators, circulation pumps, weir systems and many more. - Tank capacities between 40 to 240 litres. - Constructed entirely of stainless steel (AISI 304). - Tank construction available in AISI 316L or AISI 316Ti. - Automatic shut of heaters at low water level. - Adjustment of the cleaning time & water temperature. - Models have a ultrasonic power adjustment feature: 50%, 75%, & 100%. - High efficiency piezoelectric ultrasonic transducers with special ceramics. Nwsdpfxo Uldhs Afhob - Drainage valve.

Condition: new, Ceramic and plastic vibratory grinding and polishing chips / porcelain chips Nwedpfx Aobdf Evjfhob balls, triangle, tristar, cylinder, elipse, pyramid, cone... sizes and prices on request

Year of construction: 1990, condition: good (used), - double sided brishing / deburring machine Metabo 7445 / Metabo 72730 - 4 kW - shaft diam. 35 mm Nsdsbdm Tajpfx Afhswb - 1500 rpm

Condition: new, NEW MACHINE - double sided belt linishing and polishing machine, different configurations possible, for working in seated or upright position - linishing / linishing - linishing / polishing - polishing / polishing Motor 4, 5.5 or 7.5 kW, polishing wheel max. 120 x 500 mm, max. diam. contact wheel 400 mm, linishing belt 50 x 3500 mm Nwsdpsci Tliofx Afhjb - 3 different speeds can be choosen: 700, 800, 900, 1000, 1120, 1250, 1400, 1600, 1800, 2000, 2240, 2500, or 2800 rpm

Condition: new, NEW MACHINE Nsdpeci Tkuefx Afhswb double sided belt linshing or polishing machine, different confugurations possible - linishing / linishing - linishing / polishing - polishing / polishing Motor 4 kW, polishing wheel max. 120 x 500 mm, max. diam. contact wheel 400 mm, linishing belt 50 x 3500 mm