Used Window Type Elektromat for sale (45,440)

Condition: excellent (used), Year of construction: 2018, operating hours: 8,011 h, functionality: fully functional, total length: 16,000 mm, total width: 3,000 mm, total height: 3,600 mm, overall weight: 40,600 kg, power: 360 kW (489.46 HP), Doppstadt DW3060K Büffel/Biopower/Type F/Selector HS-514/Shredder/Crusher/Industrial Shredder • Manufacturer: Doppstadt • Type: DW3060K Büffel • Year of Manufacture: 2018 • Operating Hours: 8011 hrs • Power: 360 kW/489 hp • Industrial Shredder • Engine: Mercedes Benz MTU OM471LA(6R 1300) EUROMOT IV, 6-cylinder diesel • Pneumatic spiral fan • Fuel tank: 2 x 300 liters • AdBlue • Telematics system • Crushing roller, size M • Length: 3 meters • Diameter: 80 cm • Tooth width: 7.4 cm • Tooth height: 8.5 cm • Number of teeth: 125 pieces • Throughput: 20-60 t/h, depending on the material • Magnetic belt • Track system: Strickland 335713-DK40-AA • 2 travel speeds • Loading height: 3.10 meters • Remote control • Central lubrication system • Transport length: 16 meters • Transport width: 3 meters Lsdpjzimm Hefx Aggohl • Transport height: 3.60 meters • Total weight: 40,600 kg • German machine • Ready for immediate use _____ Selector HS-514/Star screen with return conveyor • Screen size: 8-10 cm • 13 star shafts • Integrated support legs • The attachment is picked up by the machine and driven via the auxiliary hydraulics • Star shafts are reversible • Reversing mechanism: Hydraulic • Return system for larger materials • Discharge height: 3.10 meters • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos are not excluded. - Sale subject to our general terms and conditions.

Year of construction: 2016, operating hours: 40 h, condition: like new (used), functionality: fully functional, 💎 Highlight: Only approximately 60,000 packs (approximately 40 operating hours) processed during the trial run! For sale is an absolutely like-new, high-end thermoforming packaging machine, a MULTIVAC R 245, in the extremely rare and hygienic medical version (Clean Design) (pp. 2, 15). The machine was purchased in 2016 for a medical project and was only used for a few test cycles in the sterile cleanroom. It is in absolute factory condition, both mechanically and visually (pp. 1-2). • Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG (p. 1) • Type: R 245 Medical / Clean Design (pp. 2, 15) • Year of manufacture: End of 2016 (pp. 1, 3) • Condition: Like new, unused (New Old Stock), stored in the cleanroom, dust-free • Operating hours: Only approximately 60,000 individual packs (equivalent to approximately 15 cycles) (p. 14) 📦 Technical data & dimensions • Total footprint (L x W x H): approximately 700 cm x 140 cm x 230 cm (including discharge conveyor) • Frame length, base machine: 5,500 mm (divisible frame for easier transport) (p. 6) • Machine nominal width (bottom film): 355 mm (worldwide standard, easily available) (pp. 6, 23) Lhsdpezwgxrefx Aggjl • Top film width: 342 mm (pp. 2, 23) • Infeed path: Comfortable, knee-free infeed path of 1,125 mm (p. 6) • Power supply: 400 V / 50 Hz / 3 phases (p. 8) • ATTENTION: no compressor included! 🛠️ Tool & format data (4-cavity contour tool) The installed original tool provides a highly precise, visually appealing contour packaging (ergonomic oval/drop shape), ideal for premium products (p. 14): • Format layout: 4 lanes side by side / 1 row (pp. 13-14) • Actual cavity inner dimensions per cavity (L x W): 152 mm x 64 mm (pp. 14, 16) • Package outer dimensions (L x W): 185 mm x 82 mm (pp. 14, 23) • Package depth: 19.5 mm (mold plate type 5, directly water-cooled) (pp. 14-15) • Infeed / discharge length: 185 mm (pp. 13-14) ✨ Premium features & expensive optional extras (included!) • Integrated printer: MULTIVAC MR293 HP/TT in-line direct printing system with a fully integrated MULTIVAC TTO 10 thermal transfer printer (300 dpi) for printing logos, batch numbers, and expiration dates directly in the control system (pp. 19-20). • Integrated chiller: Rittal air/water heat exchanger in a stainless steel housing for self-contained tool cooling in a closed circuit (no external water connection required) (pp. 6, 11). • Automated discharge conveyor: High-quality Intralox discharge conveyor (800 mm) with a blue Intralox chain and its own frequency inverter for synchronous package transfer (p. 12). • Scrap film management: Original MULTIVAC RSW 20 edge strip winder with integrated tear-off control and winding drive for clean film disposal (p. 12). • Gas flushing device (MAP): Gas injection bars installed on the tool side for packaging under modified atmosphere are available. • Control system: Modern 12.1" color touchscreen terminal with HMI 2.0 user interface and IPC 06 control (Windows Embedded) (pp. 9-10). • Documentation: Operating manual, spare parts catalog, electrical and pneumatic wiring diagrams in German included in the scope of delivery (pp. 19-20). 💰 Price € 39,900,- net, excluding VAT. • Shipping costs: Available upon request, throughout Europe • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT, ex wareh

Condition: used, Second-hand SAC window production line comprising: - Automation - SAC Type P5 (left-hand) - SAC Type P5 (right-hand) - SAC Type T400 - Window tool set IV 72/92 for sashes Technical data: Lsdpoz Dttysfx Aggshl - On request

Condition: used, Little used European Spraydry Technologies model 8 - 19 Tall Form Spray 304 stainless steel ATEX rated spray dryer system. Mass balance design capabilities approximately 246kgs feed @ 10% solids with 26kgs Powder @ 5% residual moisture + 220kg/h water evaporated based on Potato Proteins. Inlet temperature 190 deg.c. with exhaust temperature 90 deg.c. Mass flowrate of drying air rated 6,895kg/hr. System includes the following parts: (1) Airco model CHP inlet fan driven by 11kw motor. (1) Lanemark model DB07 propane burner with control panel. (1) Tall form spray dryer chamber with conical base fitted with dislodging hammers fitted to cylinder and cone. Access/inspection doors. Explosion suppression bottles. (1) Stainless steel feed lance with pressure nozzle. (1) 304 Stainless steel product cyclone with explosion suppression bottles. Includes DMN Westinghouse type AL250DairyMZC-11 APS rotary lock value with motor. (1) Exhaust air chamber with explosion suppression bottle. (1) Gough type GBS550 stainless steel vibratory sifter/screen, mounted on stainless steel mobile frame. (1) Feed balance stainless steel vertical vessel. (1) FBF Italia model FBF2004/P High pressure plunger pump. (1) Mettler Toledo type V4-REM industrial flow-though metal detector with Piab conveying system. (1) Airco type CHP825 exhaust fan driven by 30kw motor. (1) Robbe model Atlas filling machine for bags with controls. Lodpfxoz D Efno Aggehl Various small scale circulation pumps, pipework, instrumentation and ducting available. Specifications: Material Of Construction: 304 Stainless Steel Type Of Spray: Nozzle

Condition: used, Year of construction: 2011, Overview Bohrer R30 crate washer, built in 2011, for returnable bottle crates. The washer is currently part of a 15,000 bottles per hour bottling line. Stainless steel tunnel housing with inspection windows, access platform with stairs over the machine and its own stainless steel control cabinet. The machine is still installed and running in a mineral water plant. Technical data - Manufacturer: Bohrer - Model: R30 - Year of manufacture: 2011 - Machine type: crate washer for returnable crates - Currently installed in a 15,000 bottles/h line - Power supply: 400 V, 50 Hz - Connected load: 20 kVA - CE marked Equipment - Stainless steel tunnel housing with inspection windows - Access platform with stairs and railings - Stainless steel control cabinet with push-button operation and emergency stop Condition Lhsdpfxoz Eh Sgo Aggol Used. The machine is still installed and under power at its production site and can be inspected by appointment. Availability Immediately.

Condition: used, Year of construction: 2015, Biesse Uniline 4500 CNC processing center (i.e. for window & door frames) Description Biesse Uniline 4500 Machine nr; 1000004833 Year of construction: 2015 Machining lengths: 175 - 4,500 mm Number of milling motors: 1 Motor power: 19.2KW (25.7HP) Label printer: No Tool holder: HSK 63F Lhodpfjzp Hbqox Aggjl Changer type: Fixed + movable Number of positions in toolchanger: Flexstore total 44 Software: BiesseWorks Office licenses: 1 x Fencing: Yes complete Extra The machine has a MULTIFUNCTION UNIT EQUIPPED with a drilling unit with four tool outputs. This is placed at the front of the processing unit. Also equipped with a CNC-controlled rotation axis so that the required output is automatically selected. The outputs are equipped with ER25 recordings, speed 5,000 rpm. (If this drilling unit is also to be used for sloping frames, only two exits (opposite each other) are used). The machine also has a MULTIFUNCTION UNIT EQUIPPED with a mortising unit with two tool outlets. This is placed at the front of the processing unit. Also equipped with a CNC-controlled rotation axis so that the required output is automatically selected. The outputs are equipped with ER32 recordings, speed 16,000 rpm. (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: like new (used), Year of construction: 2022, functionality: fully functional, punching force: 18 t, working range: 2,500 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, Used Trumpf TruPunch 3000 S20 with Sheet Master Compact sheet load and unload for sale Technical data TruPunch 3000 medium format (S20) Dimensions, weights Width 6282 mm Depth 6548 mm Height 2195 mm Weight with all units 10700 kg Control, hardware, electrics Hard disk type SSD Number and size of the hard disc 2 GB x 120 GB Hard disk memory for customer programmes 10 GB Screen Touch screen Screen size 21.5 in Interface USB Network connection RJ45 Control type Bosch CML75 Operating system Windows 10 IoT Axis data X/Y/C axis drive NC-controlled, maintenance-free three-phase current servo motors Punching head drive Electric drive Maximum axis speeds - X axis 90 m/min Maximum axis speeds - Y axis 60 m/min Maximum axis speeds - Simultaneous 108 m/min Maximum axis speeds - C axis (punching) 350 rpm Maximum axis speeds - C axis (tapping) 350 rpm Maximum punching stroke rate (E = 1 mm) 800 1/min Maximum marking stroke rate 1000 1/min Precision - Positioning deviation Pa +/- 0.1 mm Precision - Position range Ps +/- 0.03 mm Precision - Smallest programmable increment 0.001 mm Working range and workpiece size Maximum sheet thickness 6.4 mm Maximum workpiece weight 150 kg Working range - X axis 2500 mm Working range - Y axis 1250 mm Punch-specific data Maximum punching force 180 kN Maximum presser foot force 20 kN Maximum tool size, punching (outer circle) 76.2 mm Maximum tool size, forming (outer circle) 101.6 mm Single tool changing time 2.8 s MultiTool changing time 0.5 s Number of linear magazine stations 20 pieces Number of tools when using MultiTool / clamps 18 pieces - 180 pieces Loading / part removal Maximum part size, part removal flap, punching 400 mm x 600 mm Flap size (X x Y) 400 mm x 1250 mm Maximum part size, fixed chute, punching 180 mm x 180 mm Connected loads, ambient temperature Pressure range, compressed air connection minimum (same direction) / maximum (static) 7 bar / 14 bar Painting Main colour white, NCS S 0505-R80B Secondary colour blue, RAL DESIGN 250 20 20 Switch cabinet/periphery grey, RAL 7040 SheetMaster Compact 2500 x 1250 mm (AK05) General Maximum Y1 axis traverse speed (suction frame) 27 m/min Maximum Y2 axis traverse speed (unloading cart) 18 m/min Lsdpfx Agoykt N Segehl Maximum Z axis traverse speed 20 m/min Y/Z axis drive Asynchronous motors controlled by frequency converter Loading Maximum sheet size 2500 mm x 1250 mm Minimum sheet size 1000 mm x 1000 mm Minimum sheet thickness 1 mm Maximum sheet thickness 6.4 mm Maximum sheet weight 160 kg Unloading Minimum sheet thickness 1 mm Maximum sheet thickness 6.4 mm Maximum sheet weight 160 kg Maximum stack height 190 mm Painting Main colour white, NCS S 0505-R80B Secondary colour blue, RAL DESIGN 250 20 20

Condition: repair required (used), Year of construction: 2009, functionality: limited functionality, machine/vehicle number: 305484, saw blade diameter: 450 mm, cutting height (max.): 160 mm, feed length X-axis: 2,000 mm, cutting range round steel at 45°: 150 mm, cutting range round steel at 90°: 150 mm, type of input current: three-phase, cutting range square steel at 45°: 140 mm, cutting range square steel at 90°: 140 mm, CNC cold saw from the renowned brand Kaltenbach, model KKS 401 NA 2000. There is a lot of information to provide, so I have posted several pictures with basic details to give you an overview of the saw's capabilities. It is a rare model with a feeder (single piece) of 0-2000mm, as well as repeat cutting of 2000-9999mm. Automatic zeroing before cutting. CNC saw head with automatic rotation of +/-60 degrees, 2 types of lubrication, emulsion, and direct spray. Option to direct the cut piece to an ejector for small pieces, as well as a chain ejector with a function for lowering longer and heavier pieces. I haven't included this in the pictures as it is not installed, but the saw also comes with a set of protective guards with safety barriers and a large number of spare parts. The complete documentation is original and is linked to the machine's serial number, making installation easy and straightforward. Problem explanation: the saw is connected to the electrical power supply, and each individual function (and there are many) is fully operational. The problem arises during automatic operation; the most likely cause is the program parameters themselves (it uses the Windows platform). I haven't been able to find a suitable programmer who can learn on my machine. Possible solution: I contacted the saw manufacturer, and they directed me to their authorized service provider, so I have their contact information, which I can provide to the future buyer. The estimated cost of repair in Serbia is between 3000-5000 EUR. If you are closer to Germany or the Czech Republic, this cost will be significantly lower. So, there are two price categories: if you buy the machine in its current condition, the price is as advertised. If I resolve the problem, the price will be considerably higher. The advertised price includes professional dismantling and loading onto a truck (a rather important, and not inexpensive, item). Transportation is at the buyer's expense. I hope I have clarified the current condition of the machine. Due to a change in business activities, the saw is surplus to production. Happy shopping! Lhjdpfx Aeyk Inpjggjl

Condition: good (used), Year of construction: 2016, 2016 Tornos DT 26 Swiss Type CNC Sliding Head Lathe With Fanuc Series 31i-Model B Control & Tornos SBF326-3.2M Bar Feeder Maximum Bar Ø25.4mm. Rapid Traverse 32m/min. Standard Workpiece Length With Guide Bush 225mm. Standard Workpiece Length Bushless 50mm. Main Spindle- Spindle Speed Range 0-10,000rpm (10.5kW Motor). Maximum Turning Tools 6 (Shank 12 x 12mm.). Number Of Frontal Tools (Main-Operation/Counter-Operation) 4/4. Max Front Drilling Ø12mm, Max Front Tapping M10 x 1.5.Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter Spindle-Maximum Bar Ø25.4mm. Main Spindle- Spindle Speed Range 0-15,000rpm (5kW Motor). Max Insertion Length Of Workpiece Into Counter Spindle 100mm. Max Standard Length Of Workpiece 120mm. Max Back Drilling Ø10mm, Max Back Tapping M6 x 1. Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter-Operation-Max Number Of Tool Positions 8, Max Rotating Tool Speed 7,200rpm (1kW Motor). S/No. 2581050017 (2016). Please note a loading charge of £200 + VAT to be added to buyer's invoice. Ledpfx Aoz Dg Eveggohl With Coolant System, Hennig Chip Conveyor, Krauft Bauer Fire Suppressor Unit, SEI Mist Extraction Unit, Parts Catcher, Parts Conveyor, Signal Tower, Tool Kit, Cromar Swarf Bin & Manuals. Overall Dimensions L2,230 x W1,250 x H1,730mm. Weight 2,400kg.

Condition: used, Year of construction: 1992, functionality: unexamined, machine/vehicle number: FBZ-8732, travel distance X-axis: 2,500 mm, type of input current: three-phase, input voltage: 380 V, CNC bed-type milling machine Anayak FBZ-HV-2500 with a swiveling universal milling head, year of manufacture 1992, Fidia control system. Lhjdpfx Aoz A Uitoggsl Serial no. FBZ-8732, connection 380 V, 50 Hz, 60 A, 40 kW. Longitudinal travel X 2,500 mm, bed-type table with continuous T-slots. Equipment: Irudex chip conveyor with chip collection cart, hydraulic unit with hydraulic ring for hydraulic tool release, control panel with keyboard, safety guard with viewing window. Location: Homburg (Saar), Germany. Inspection by appointment. Price on request, net plus VAT, ex works; dismantling and loading by arrangement. All information without guarantee.

Condition: used, Year of construction: 2000, operating hours: 1 h, power: 206 kW (280.08 HP), next inspection (TÜV): 05/2027, Equipment: ABS, air conditioning, cabin, Unique, high off-road capability special vehicle LOF M.A.N. Agro single-wheel, all-wheel drive tipper truck 4x4 type L 90 with Hiab loading crane X-HiPro 122 E-3 with radio remote control and Meiller 3-way tipper body, Agro tires 445/65 R22.5, hydraulic rear axle steering, PTO drive at the rear, 3-axle differential locks, Euro 3 engine without ADBlue, leaf-sprung suspension, air conditioning, additional second hydrostatic drive, 2 x trailer coupling, from a second owner with only 47,000 km. Lhsdpfsz Edwrsx Aggol The tipper body and loading crane are interchangeable and can be removed. LOF tractor unit Long cab with bunk and 2 rear windows PTO drive at the rear Single Agro special tires 445/65 R 22.5 Air conditioning Wheelbase 3,600 mm Gross vehicle weight 16,500 kg, gross vehicle weight 18,000 kg possible Unladen weight 10,897 kg Payload 5,603 kg at gross vehicle weight 16,500 kg Payload 7,103 kg at gross vehicle weight 18,000 kg possible Engine Euro 3, D0836 LFL03, 6 cylinders with 280 hp (without Ad_Blue) All-wheel drive 4 x 4 All-wheel steering on both axles Front and rear axles can be steered individually or together Front-wheel drive can be engaged All-wheel longitudinal lock Differential lock in front and rear axle Hydrostatic drive for steplessly adjustable speeds between 0-5 km/h Rear axle steerable with electronic/hydraulic steering system for extremely small turning radii Meiller 3-way tipper (year of construction 2023) approx. 3.60 m x 2.30 m x 0.40 m high Radio remote control for tipper Headboard 0.70 m high Bed with lashing eyes Loading crane Hiab X-HiPro 122E-3 (year of construction 2019), foldable behind the cab Crane with 3 hydraulic extensions Lifting capacity at approx. 4.30 m / 2,560 kg // 8.10 m / 1,260 kg // 10.20 m / 980 kg according to the manufacturer Slew and gripper control 2-point support with one swivel support Radio remote control Floor control UVV crane valid until 03/2027 Gearbox ZF 16 S 109 mechanical Gearshift locking pneumatic Transfer gearbox VG1000/2 with off-road reduction Front and rear axles leaf-sprung Stabilizer for front and rear axle Front axle VA9-0950 driven, rear axle AP H9-1380AP Axle ratio i = 5.92 Front springs parabolic 7.5 tons, rear springs trapezoidal Trailer coupling ring spring with air pressure connections 3 hydraulic connections at the rear for auxiliary hydraulics Permissible gross train weight 30,000 kg ABS Engine brake Cruise control Fuel tank 300 liters on the right Sun visor Work lights on the cab roof Roof hatch Electric window on the right Driver's comfort seat air-sprung Passenger's comfort seat air-sprung Radio The tipper body and loading crane are removable / interchangeable system German vehicle from a second owner Very good and well-maintained condition Service was completely performed at 45,000 km Sale exclusively to commercial businesses Price NET plus 19% VAT. We will gladly provide you with attractive financing options. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2162

Condition: used, Year of construction: 2000, operating hours: 1 h, power: 206 kW (280.08 HP), next inspection (TÜV): 05/2027, Equipment: ABS, air conditioning, cabin, Unique, highly off-road capable LOF M.A.N. Agro special vehicle, single-tire all-wheel drive tipper truck 4x4, type L 90 with Hiab X-HiPro 122 E-3 loading crane with remote control and Meiller 3-way tipper body, Agro tires 445/65 R22.5, hydraulic rear axle steering, PTO drive at the rear, 3-axle differential locks, Euro 3 engine without AdBlue, leaf-sprung suspension, air conditioning, additional second hydrostatic drive, 2 x trailer coupling, second-hand with only 47,000 km. The tipper body and loading crane can be exchanged and removed. LOF tractor unit Long cab with bunk and 2 rear windows PTO drive at the rear Single Agro special tires 445/65 R 22.5 Air conditioning Wheelbase 3,600 mm Total weight 16,500 kg, total weight 18,000 kg possible Unladen weight 10,897 kg Payload 5,603 kg at a total weight of 16,500 kg Payload 7,103 kg at a total weight of 18,000 kg possible Engine Euro 3, D0836 LFL03, 6 cylinders with 280 hp (without AdBlue) All-wheel drive 4 x 4 All-wheel steering on both axles Front and rear axles can be steered individually or together Front-wheel drive can be engaged All-wheel longitudinal lock Differential lock in the front and rear axles Hydrostatic drive for infinitely adjustable speeds between 0-5 km/h Rear axle steerable with electronic/hydraulic steering system for extremely small turning radii Meiller 3-way tipper body (year of manufacture 2023), approx. 3.60 m x 2.30 m x 0.40 m high Remote control for the tipper body Headboard 0.70 m high Bed with lashing points Loading crane Hiab X-HiPro 122E-3 (year of manufacture 2019), foldable behind the cab Crane with 3 hydraulic extensions Lifting capacity at approx. 4.30 m / 2,560 kg // 8.10 m / 1,260 kg // 10.20 m / 980 kg according to the manufacturer Slew and grab control 2-point support with one pivoting support leg Remote control Lhedez Edx Nspfx Aggel Floor control UVV crane valid until 03/2027 Gearbox ZF 16 S 109 mechanical Gearbox shift locking pneumatic Transfer gearbox VG1000/2 with off-road reduction Front and rear axles leaf-sprung Stabilizer for front and rear axles Front axle VA9-0950 driven, rear axle AP H9-1380AP Axle ratio i = 5.92 Front springs parabolic 7.5 t, rear springs trapezoid Trailer coupling ring spring with air pressure connections 3 hydraulic connections at the rear for auxiliary hydraulics Permissible total towing weight 30,000 kg ABS Engine brake Cruise control Fuel tank 300 liters, right Sun visor Work spotlights on the cab roof Roof hatch Electric window on the right Driver's comfort seat, air-sprung Co-driver's comfort seat, air-sprung Radio The tipper body and loading crane can be removed/exchange system German vehicle from the second owner Very good and well-maintained condition Service was completely carried out at 45,000 km. Sale exclusively to commercial businesses. Price NET plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2162

Condition: used, Year of construction: 2015, Cutting and machining center, FTB 100 A2 2S3 NFZ Feed direction from right to left Windows 10 min. cutting length (PVC only): 296 mm min. part length (PVC with steel): 300 mm max. part length (PVC with steel): 4,000 mm max. profile depth: 130 mm max. profile height: 130 mm Automatic feeder magazine for manual loading, for 12 profiles with a min. length of 600 mm and a max. length of 6,500 mm: 8 axes - CNC - machining station A2 Lhjdezm Hr Rspfx Aggsl - 3 CNC axes X, Y, Z - one 2-way spindle each, 0.75 kW 2 S 3 – Sawing station - 1x stepless swivel range of the saw from 45° - 135° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm - 1x saw 45° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools Cross conveyor with buffer function CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools TFT screen for steel length display - 12" TFT screen for displaying the steel lengths for manual steel insertion and insertion depth. Label thermal printer PF4i with LAN - with network connection for manual application of labels Laser e-SolarMark 30W - CO2 laser, 30 W power - 230V 50Hz / 115V 60Hz, 1PH, 700W ASE 100 S steel cutting and insertion - with feeder magazine with 12 slots Control panel steel profile loading ASE 100 - 15-inch TFT display touchscreen Double screw unit from above and below - automatic distance adjustment between the two screw units, motorized, screw spacing: min 155 mm / max. 500 mm Double dowel hole drilling station Ø 6mm and Ø 10 mm - with automatic adjustment to different profile types with 8 lateral positioning points 3-axis - CNC - machining station S, type L - one 3-axis tool carrier (twin module) for up to 18 machining units, equipped on both sides One locking component insertion station for a standard locking component for frame profiles - with vibrating hopper, bunker and locking component singulation - positioning for attaching the locking components Locking component insertion station via bar magazine - One locking component insertion station for a locking component for frame profiles and mullions/transoms, on one side. 2x screw unit for locking component inserter - automatic single screw unit for locking component insertion stations, positionable in the y-axis Cross conveyor magazine - for transporting the profiles for stacking Stacking and sorting unit, 3 axes - one stacking and sorting unit in a 3-axis design Carriage change station - one carriage change station for positioning two carrier carriages in the profile stacking position. Plant capacity: approx. 270 frame units in 7.5 hours with 85% availability approx. 130 mullions, posts, uprights with the following machining operations: Frame approx. 1200 x 1200 mm: 4 x cutting 2 drainage slots, rebate bottom 2 drainage slots outside/bottom 2 ventilation slots, rebate top Screws 4x/part 6-8 x standard locking component insertion for window 8 x sealing groove milling 2-3 x dowel holes vertical bars for window

Condition: used, Manufacturer: WEINIG Type: UC6 Year of manufacture: 1997 Condition: untested Machine description/technical data WEINIG UNICONTROL6 window manufacturing system including Oertli tool set IV68 and IV77 wood + wood/aluminum (all cutting drawings available upon request) Screen control for 99 window types. 1 type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Manufacturing possibilities: Individual parts, double parts, frame-wise, series production, edge profiling Control of tool positions (longitudinal and transverse machining) via selector switch on the control panel Transverse machining: - electronic length stop for wood lengths up to 2,600 mm, with auxiliary stop for wood lengths up to 3,600 mm, with slot table that moves along and has separate control -Studio window setup: Swiveling length stop ± 60° with electronic digital display and pneumatic clamping Sliding counter rail Special pressure pad for the production of angled parts Cut-off saw 3 kW Axial adjustment manually with mechanical digital display Laser guide for cut-off saw to detect the section Cut-off saw pneumatically controlled, mortise dimension adjustable via mechanical numerical display Mortise and slot spindle 11 kW (standard 7.5 kW) Tool clamping length: 320 mm Number of tools: 4 x 80 mm Axial adjustment: 240 mm Electronic spindle brake Longitudinal machining: 7 feed rollers in the infeed and 5 in the outfeed, high/low controlled for faster and shorter edge profiling process Synchronous spindle (vertical right) 7.5 kW Before the profiling spindle for splinter-free edge profiling Profiling spindle 11 kW (standard 7.5 kW) Lhodpfxezx Smqj Aggel Number of tool positions: 4 x 80 mm, pneumatically controlled Axial adjustment: pneumatic Mechanical spindle brake Profile milling unit (horizontal above) 3 kW After the profiling spindle, radially controlled to 2 positions and axially controlled to 3 positions Mechanical spindle brake Profile milling unit (vertical right) at the end of the machine 3 kW Radially controlled to 2 positions and axially controlled to 3 positions Plunge automation: The plunging in/out at the beginning/end of the wood is controlled via 2 adjustable limit switches. Plunge tolerance ± 3 mm. Mechanical spindle brake Return conveyor to the operator including identification function for further processing Partial renewal of pneumatic hoses and extraction hoses in the machine required! Price in €: on request VAT: exclusive Availability & Location Location: Greater Freiburg area Available: promptly after dismantling Inspection: in operating condition / in operation Price in €: on request

Condition: used, mileage: 275,000 km, power: 93 kW (126.44 HP), first registration: 12/2010, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 2, Equipment: central locking, * Power steering * Partition wall * Central locking system Speed control: Cruise control * Electric windows Lhjdpfoz D Hkxex Aggjl * Radio Cooling system: C33 France with cooling plate in the cargo area Type: 526 EV Body: Cazaux The vehicle is in good condition!

Condition: used, Used Stainless Steel Millchem Dissolver type FMG25HD. Driven by a 22/15kW, 380V, 1500/750 rpm motor. Stainless Steel Turbine has a diameter of approximately 300mm. Supplied with (1) stainless steel tank with a capacity of approximately 1300 litres measuring 1180mm diameter x 1240mm. Lhedpfx Agezd Urgegol

Condition: used, Year of construction: 2018, Bed milling machine, second-hand Make: Austen Model AX 607 Year of construction: 2018 Control unit Basis HH Ljdpfou Rfh Tox Aggehl 5-axis HSC bed-type milling machine for machining of long parts, such as beams. Was used for aluminum profiles in window construction and can also be used for light steel machining. steel. Spindle rotates and swivels. Machine moves on linear guides and has direct HH measuring systems. Technical data: X-travel 7000 mm Y-travel 600 mm Z-travel 600 mm Spindle speeds infinitely variable 20-20,000 rpm Spindle motor 11 kW Feed range X-direction 0-90 m/min. Feed range Y-direction 0-50 m/min. Feed range Z-direction 0-40 m/min. Tool changing device 15 Pos. Spindle holder 63 HSK- Total power requirement 50 kVA Machine weight 12 to. Space requirement 9x2x2.7 m

Condition: used, DSG Type 17 x 36 Gap Bed Centre Lathe Ledpfx Ajzvp Iaoggshl Ø405mm 4 Jaw Chuck. Swing Over Bed Ø432mm. Swing Over Cross Slide Ø229mm. Swing Over Gap Ø660mm. Centre Height 216mm. Distance Between Centres 1,000mm. (20) Speed Range 16-2,000rpm. Spindle Bore Ø76mm. QTC. S/No. 41238-3-79. With Coolant System, Bott 2 Door Storage Cabinet With Contents Of Toolholders, Tooling & Hand Tools. Steel Storage Rack With 3 Faceplates, 2 Fixed Steadies, Ø305mm 3 Jaw Chuck, Ø305mm 4 Jaw Chuck. Weight 2,540kg.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 050.940-08, LUTRO Painting and Drying System – 2 Booths + Dryer – Year of Construction 2008 Price: €24,900 (negotiable) net Dismantling and removal to be carried out by the buyer For sale is a comprehensive LUTRO painting and drying system for professional/industrial use. The system was manufactured in 2008 by LUTRO Luft- und Trockentechnik GmbH and, according to the available nameplates, consists of two booths and one dryer. The system also includes the existing ventilation/filtration system, heating/burner technology, and the electrical control system with a Siemens SIMATIC touch panel. The system is currently still assembled on-site. This allows a prospective buyer to gain a good impression of the layout, components, and scope of the system before purchase. System components: 1. LUTRO KSP 7 BT Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: KSP 7 BT Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.0 m Max. component width: 3.5 m Max. component height: 2.0 m Max. wheel load: 700 kg Usable volume: 81 m³ Total steam volume: 127 m³ Connected power according to nameplate: 7.5 kW Air velocity: 0.24 m/s Air flow rate: 24,000 m³/h Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 1,713 g Maximum permissible solvent quantity during spray operation: 80,000 g/h 2. LUTRO KSP 8 BT Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: KSP 8 BT Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.5 m Max. component width: 3.5 m Max. component height: 2.5 m Max. wheel load: 1,000 kg Usable volume: 122 m³ Total steam volume: 178 m³ Connected power according to nameplate: 11 kW Air velocity: 0.23 m/s Air flow rate: 30,000 m³/h Minimum exhaust air volume flow: 1,800 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 2,321 g Maximum permissible solvent quantity during spray operation: 100,000 g/h Ledszwvb Ajpfx Aggehl 3. LUTRO TR 1 Dryer Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: TR 1 Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.0 m Max. component width: 3.5 m Max. component height: 2.0 m Max. wheel load: 700 kg Usable volume: 81 m³ Total steam volume: 107 m³ Connected power according to nameplate: 4 kW Air velocity: 0.15 m/s Air flow rate: 15,000 m³/h Minimum exhaust air volume flow: 900 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 1,307 g Maximum permissible solvent quantity during spray operation: 50,000 g/h Equipment / existing components Based on a visual assessment, the system includes, among other things: 2 LUTRO booths 1 LUTRO dryer Large-area floor extraction with grating Ceiling filter/supply air system Supply and exhaust air technology Ventilation units Heating/burner technology Air ducts Electrical switch cabinets LUTRO system control Siemens SIMATIC touch panel Booth doors and personnel doors with viewing windows Lighting and other existing system equipment In principle, the system scope present on-site will be sold. Condition The system is in used condition, reflecting its age, and is currently still assembled. Important note regarding dismantling and transport Dismantling is not included in the purchase price. Price €24,900 (negotiable) net Inspection / further information An inspection of the system is possibl

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We offer you: CNC machining center, universal, with pallet automation Manufacturer: DMG MORI Type: DMU 50 3rd with PH Cell 150 Year of manufacture: Machine 2023 / Automation 2025 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Ljdpoz A A Dxofx Aggohl Table dimensions: D 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 120 Feed rates: Rapid traverse (x/y/z): 42 m/min Operating hours: approx. 12,320 h Spindle hours: approx. 4020 h Technical features & accessories: - Active spindle cooling - Direct path measuring system in all axes - Scraper-type chip conveyor with cleaned filter screen - Internal coolant supply (IKZ) 40 bar, consisting of: - Paper band filter - 600 l tank - Cabin roof - Rotary through-feed in the spindle - Double filter - Blow-off air through the spindle center - Rotating viewing window - Flushing gun for chip removal - Oil and emulsion mist separator - Infrared measuring probe, manufacturer Heidenhain TS 460 (if available) - Tool measurement system, manufacturer Heidenhain TT160 (if available) - Preparation for 3D quickSET - Automation interface PH Cell, consisting of: - Interface - 4-channel rotary through-feed - Automatic loading door - Operating mode 4 - Tracy surface interpolation - Pallet loading and unloading system PH 150, consisting of: - 10-position pallet storage - External electronic handwheel (if available) Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Subject to change and errors in the technical data and information, as well as prior sale!

Condition: like new (used), Year of construction: 2008, functionality: fully functional, planing width: 530 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,800 rpm, total length of planing tables: 2,300 mm, total width: 1,000 mm, total height: 920 mm, overall weight: 750 kg, Equipment: CE marking, KNAPP AD 530 SUPER Planer-Thicknesser | 530 mm | TERSA Shaft | Electric Table Lift | Year 2008, Planer-Jointer! Professional KNAPP AD 530 planer-thicknesser, manufactured in Austria. This is a high-class industrial machine designed for intensive use in woodworking shops, furniture production, and the manufacture of window and door frames. The AD 530 model stands out with its robust construction, 530 mm working width, long cast iron tables, and a modern TERSA shaft, enabling quick knife changes without adjustment. An additional advantage is the electric table lift on the thicknesser, which provides convenient and very precise adjustment of the working height. Key advantages: - Austrian KNAPP production - Year of manufacture: 2008 - Working width: 530 mm - TERSA MONOBLOCK planing shaft with 4 knives - Quick knife change without adjustment - Electric thicknesser table lift - Automatic opening of the planer tables - Long cast iron work tables - Robust construction with a weight of 750 kg - Industrial quality construction TECHNICAL PARAMETERS: - Manufacturer: KNAPP Produktion GmbH - Model: AD 530 SUPER - Year of manufacture: 2008 Lodezxxqvjpfx Aggohl - Country of manufacture: Austria - Working width: 530 mm - Length of planer tables: 2300 mm - Shaft diameter: 120 mm - Shaft type: TERSA MONOBLOCK - Number of knives: 4 - TERSA knife dimensions: 530 × 35 × 3 mm - Shaft speed: 4800 rpm - Maximum planing height: 250 mm - Minimum planing height: 3 mm - Maximum material removal: 8 mm - Feed speeds: 7 / 11 / 15 / 19 m/min - Tilting fence 90°–45° - Thicknesser table dimensions: 530 × 930 mm - Motor power: 5.5 kW - Power supply: 400 V - Machine weight: 750 kg - Machine dimensions: 2300 × 920 × 1000 mm Equipment: - TERSA MONOBLOCK shaft with 4 knives - Automatic opening of the planer tables - Electric thicknesser table lift Application: The machine is perfect for: - furniture production, - carpentry, - companies producing stairs, - production of windows and doors, - processing of solid wood, - professional woodworking workshops. The machine is in very good technical condition. A solid construction ensures high operational smoothness, great cutting accuracy, and years of trouble-free operation. PRICE VAT MARGIN BRUTTO OR VAT23% INVOICE WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: good (used), Year of construction: 2010, Weinig Conturex C124-R CNC Window production machine (in right side infeed composition) Also available C124-L (Right-side infeed) year 2019 Description; Year of construction: 2010 Working width 40 - 260 mm Working height 25 - 150 mm Ratio of wood height to width max. 2:1 Powergrip clamping table Table support length 2x 2280 mm Workpiece length without follow-up cycle 220 - 2700 mm Workpiece length with follow-up cycle 2700 - 4500 mm Workpiece length with multiple follow-up cycle 4500 - 6000 mm Full description on request Available approx. summer 2026 (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Lodpfszg A A Eox Aggshl Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: ready for operation (used), Year of construction: 2012, complete production line from SCM Technical details: Workpiece length 250 - 3,100 mm Productivity 180 parts/shift Feed rate, continuously adjustable, max. 20 m/min Automatic central lubrication system CE conformity marking 2 slot spindles with HSK85 tool holders 2 profiling spindles, right, with HSK85 tool holders 2 profiling spindles, left, with HSK85 tool holders 3 spindles, horizontal 8 tool changers, 96 positions Space requirement approx. 30,000 x 15,000 mm Equipment of the system: 1 - Transverse conveyor SCM for feeding the planing machine 2 - Planing machine Superset NT 31 3 - Transverse conveyor SCM to the double-end profiler 4 - Double-end profiler SCM Multiten D 5 - Transverse conveyor SCM to the drilling machine 6 - Drilling machine SCM Fleximat 7 - Double-angle transfer with transverse buffer SCM TA 1/1 8 - Drilling machine SCM Fleximat 9 - Double-angle transfer with transverse buffer SCM 10 - Longitudinal conveyors 11 - Profiling machine SCM Winprof R 12 - Transverse conveyor SCM 13 - Profiling machine SCM Winprof L Ledpfx Aoz D R S Toggehl 14 - Transverse conveyor at the outfeed SCM

Condition: used, Used Hosokawa Nauta type conical mixer, approximately 750 litre working capacity. Ljdpfxozbuhds Aggshl

Condition: used, mileage: 47,000 km, power: 206 kW (280.08 HP), first registration: 09/2000, fuel type: diesel, overall weight: 16,500 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2027, color: white, gearing type: mechanical, emission class: euro3, Equipment: ABS, air conditioning, all wheel drive, crane, Unique, highly off-road capable LOF M.A.N. Agro special vehicle, single-tire all-wheel drive tipper truck 4x4, type L 90 with Hiab X-HiPro 122 E-3 loading crane with remote control and Meiller 3-way tipper body, Agro tires 445/65 R22.5, hydraulic rear axle steering, PTO drive at the rear, 3-axle differential locks, Euro 3 engine without AdBlue, leaf-sprung suspension, air conditioning, additional second hydrostatic drive, 2 x trailer coupling, second-hand with only 47,000 km. The tipper body and loading crane can be exchanged and removed. LOF tractor unit Long cab with bunk and 2 rear windows PTO drive at the rear Single Agro special tires 445/65 R 22.5 Air conditioning Wheelbase 3,600 mm Total weight 16,500 kg, total weight 18,000 kg possible Unladen weight 10,897 kg Payload 5,603 kg at a total weight of 16,500 kg Payload 7,103 kg at a total weight of 18,000 kg possible Engine Euro 3, D0836 LFL03, 6 cylinders with 280 hp (without AdBlue) All-wheel drive 4 x 4 Lhedpoz Edw Sjfx Aggsl All-wheel steering on both axles Front and rear axles can be steered individually or together Front-wheel drive can be engaged All-wheel longitudinal lock Differential lock in the front and rear axles Hydrostatic drive for infinitely adjustable speeds between 0-5 km/h Rear axle steerable with electronic/hydraulic steering system for extremely small turning radii Meiller 3-way tipper body (year of manufacture 2023), approx. 3.60 m x 2.30 m x 0.40 m high Remote control for the tipper body Headboard 0.70 m high Bed with lashing points Loading crane Hiab X-HiPro 122E-3 (year of manufacture 2019), foldable behind the cab Crane with 3 hydraulic extensions Lifting capacity at approx. 4.30 m / 2,560 kg // 8.10 m / 1,260 kg // 10.20 m / 980 kg according to the manufacturer Slew and grab control 2-point support with one pivoting support leg Remote control Floor control UVV crane valid until 03/2027 Gearbox ZF 16 S 109 mechanical Gearbox shift locking pneumatic Transfer gearbox VG1000/2 with off-road reduction Front and rear axles leaf-sprung Stabilizer for front and rear axles Front axle VA9-0950 driven, rear axle AP H9-1380AP Axle ratio i = 5.92 Front springs parabolic 7.5 t, rear springs trapezoid Trailer coupling ring spring with air pressure connections 3 hydraulic connections at the rear for auxiliary hydraulics Permissible total towing weight 30,000 kg ABS Engine brake Cruise control Fuel tank 300 liters, right Sun visor Work spotlights on the cab roof Roof hatch Electric window on the right Driver's comfort seat, air-sprung Co-driver's comfort seat, air-sprung Radio The tipper body and loading crane can be removed/exchange system German vehicle from the second owner Very good and well-maintained condition Service was completely carried out at 45,000 km. Sale exclusively to commercial businesses. Price NET plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2162