Used Wire Binding Machine for sale (86,874)

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,537 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 1,030 mm, Wire EDM machine from 2021 with only 11,537 operating hours! TECHNICAL DETAILS Travel Path Travel path X-axis: 600 mm Travel path Y-axis: 400 mm Travel path Z-axis: 350 mm Workpiece Data Workpiece weight: 1,000 kg Workpiece height: max. 350 mm Workpiece width: max. 800 mm Podsx I Akuspfx Ah Usha Workpiece length: max. 1,030 mm Table Data Table width: 630 mm Table length: 950 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,400 x 2,160 x 2,320 mm Total weight: 5,440 kg EDM hours: 11,537 h Power-on hours: 29,381 h Type of input current: three-phase current EQUIPMENT 16 kg spools Note: Dismantling and loading can be carried out by the seller at an additional charge.

Condition: used, Year of construction: 1989, serial number L169 output 6 kw ja seperat digital readout ja Wizard Phjdpfx Ahjvu Hl Re Uja Puls50 Kühlwasseraufbereitungsei

Year of construction: 2022, condition: ready for operation (used), General Data Machine weight 3500 kg Measurements height 2200 mm Dimensions Podpfxsx Nkqfe Ah Uoha Machine Length 2800 mm This FANUC ROBOCUT α-C600iC was manufactured in 2022. A wire EDM machine designed for precision, it offers reliable performance for intricate metalworking tasks. Consider the opportunity to buy this FANUC ROBOCUT α-C600iC wire edm machine. Contact us for more information. Application Types EDM

Year of construction: 1990, condition: ready for operation (used), Offered is a straightening machine with cold rolling unit. 2-fold wire coil payoff, installed are: GSG COMBI rolling stand year 1994, GSG KWG.3 rolling stand year 1991, roller driver GSG ERT year 2007, straightening and cutting unit Wafios RBK51M year 2000, wire drawing unit 1 pass, wire diameter 6.0mm-12.0mm, max. speed 120m/min, min. cutting length 1600mm, cutting rate up to 80cuts/min, inlet strength approx. 50daN/mm². Package dimensions for finished material up to max. 14000mm length, up to 1000 bars per bundle. Length of the system approx. 5000mm. The system is offered without safety fence. Viewing possible by arrangement. Phjdpfxexzikfo Ah Uja

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, GF AgieCharmilles CUT E 600 – Used Wire EDM Machine, Year of Manufacture 2019 The GF AgieCharmilles CUT E 600 from 2019 is a high-precision and reliable used wire EDM machine, setting new standards in productivity, precision, and operating comfort through Swiss engineering and state-of-the-art technology. It is designed to meet the highest demands in tool and mold making, medical technology, and precision manufacturing. Main Features & Benefits ✅ Large Working Area and Robust Construction Traverse paths (X/Y/Z): 600 x 400 x 350 mm Traverse paths (U/V): ± 50 mm Max. workpiece size: 1030 x 800 x 350 mm Max. workpiece weight: 1,000 kg T-shaped design with a lowerable door for easy loading even of heavy workpieces Phjdpfx Ahexwk Ane Usa ✅ Maximum Precision and Repeatability Glass scales on all axes for long-term accuracy without recalibration Contour accuracy up to ± 2 µm, surface roughness up to Ra 0.12 µm Thermally stable construction for consistently precise results ✅ State-of-the-Art Digital Generator (IPG) Up to 18% faster processing compared to previous models Anti-electrolysis technology for improved surface quality and increased service life Automatic power adjustment (POWER-EXPERT) to prevent wire breakage TAPER-EXPERT for taper cuts up to 30° over 77 mm height ✅ Intelligent Control – AC CUT HMI with 19” Touchscreen Windows-based control system with intuitive user interface 3D graphics, DXF import, and real-time process monitoring PART-EXPERT and WIRE-EXPERT for optimal cutting conditions and precise results Remote control included as standard ✅ High Productivity and User Friendliness Automatic threading and re-threading, even for hard wires Large 25-kg wire spool for extended operation times Energy-saving ECONOWATT system reduces idle power consumption to < 1 kW Compact footprint (approx. 4 m²) for optimal integration into any workshop Ideal For: ✔ Tool and mold making ✔ Precision components from steel, carbide, or copper alloys ✔ Series production and small batch manufacturing with high quality standards 📌 Our used 2019 machine undergoes professional cleaning, servicing, and thorough testing prior to sale to ensure maximum quality and reliability. 📩 Contact us for a customized offer or a demonstration!

Condition: good (used), Year of construction: 2011, functionality: fully functional, section length (min.): 100 mm, section length (max.): 3,500 mm, type of input current: three-phase, For sale: Used WAFIOS RS4 wire straightening machine in good condition. Technical data: • Model: RS4 Phedpfew U Eubox Ah Uea • Manufacturer: WAFIOS • Straightening range: 3 to 6 mm • Equipment: includes blade, straightening stones, feed rollers in various sizes, decoiler • Year of manufacture: 2011 Condition: • Fully functional, regularly serviced Location: 74931 Lobbach Price: €9,900 net

Condition: excellent (used), Year of construction: 2016, operating hours: 29,000 h, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, The offered Mitsubishi MP2400 from 2016 represents an excellent opportunity for companies engaged in or upgrading to high-precision wire EDM machining. With a total operating time of approximately 29,000 hours, the machine is in very good condition and fully operational. Demonstration or test runs are available, allowing interested parties to gain a direct impression of the machine’s condition and performance. Machine data & technical features Series specifications: • Control unit: Advance Plus2 • Max. workpiece dimensions (W × D × H): approx. 1050 × 820 × 305 mm • Max. workpiece weight: approx. 1,500 kg • Table dimensions: approx. 840 × 640 mm • Travel distances (X/Y/Z): approx. 600/400/310 mm • Wire changes possible between Ø 0.05 / 0.10 / 0.20 / 0.25 mm • Linear shaft motor drive system offering supreme precision in the micron range (MP denotes the precision package) Special features of this machine: • Operating time: approx. 29,000 hours • Condition: very good, fully functional, demonstration possible Phsdpfx Ahexztuhs Uoa • Integrated CAM system directly on the machine (machine programming) • 20-kg wire spool station for less frequent wire changes • Accessories (excl.): 8 clamping bars, various Erowa clamping devices, prisms and custom clamps, ionizer

Condition: used, Year of construction: 2012, Travel distance: X 500 mm Y 350 mm Z 300 mm Psdpfx Ahsuu Dl Re Uoha Water bath machine Automatic wire threader

Year of construction: 2013, condition: ready for operation (used), General Data Machine weight 3500 kg Control Unit Brand MITSUBISHI Main Drive Number of axis 3 Movement X-Axis Movement 600 mm Y-Axis Movement 400 nmm Z-Axis Movement 310 mm Workpiece Workpiece X 820 mm Workpiece Y 305 mm Workpiece Z 1050 mm Workpiece weight 1500 kg Psdpfx Ahjx D Iv Ss Usha Additional Equipment Wire diameter: 0.1 – 0.3 mm This 3-axis Mitsubishi Electric MV2400R wire EDM machine was manufactured in 2013. It features a PC-based control unit with a 15" LCD touchscreen, supporting 2D/3D CAM and graphics verification. Capable of handling workpieces up to 1050 x 820 x 305 mm and 1500 kg, it offers a machining travel of 600 x 400 x 310 mm. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi Electric MV2400R machine we have for sale. Contact us for more information. Application Types EDM

Condition: excellent (used), Now in stock at Glendale we have this JBI Punch 3400. This punch includes both 3:1 and 2:1 pitch punching tools. The Punch 3400 is electrically operated via a foot pedal or sheet pressure and offers automatic sheet ejection, hugely increasing production. This model is in excellent condition and perfect working order. When innovation makes productivity and flexibility compatible… The Punch3400 is a heavy duty electric table top machine suitable for all punching applications when automatic equipment is not appropriate. Compact, it takes little working space whilst offering production levels higher than any other desk machine. Combined with the optional reception module, included with this machine, its unique punching, sheet ejection and stacking system in ONE operation provides one of the highest output (up to 18000 sheets per hour) in its range for a minimum investment. • Efficient : Punches bites of up to 30 sheets (80gsm) regardless of punching hole pattern. Punching, ejection and stacking in ONE operation with optional reception module re-delivering the punched sheets in the right order for increased productivity. • User friendly : Easy edge to hole margin adjustment. Selectable operation mode (sheet presence detector or foot pedal). Easy and accurate vertical sheet insertion. Reversing switch for quick release of paper jams. • Versatile : Fast and easy punching tool change over. All punch pins can be easily disabled for custom punch patterns. Specifications Manufacturer James Burn International Model Punch 3400 Max sheet size 340mm x 340mm Phodswpilhjpfx Ah Uja Punching capacity up to 30 sheets (80gsm) Cycle speed 60 punches per minute Punch operation Foot pedal or sheet detector Punch tools included 3:1 & 2:1 pitch for wire binding Power requirement 220/240v 50Hz Machine weight 50kg + table Dimensions L680mm x W565mm x H460mm (excluding table)

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 2,340 mm, total length: 2,600 mm, total width: 2,600 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, overall weight: 3,300 kg, warranty duration: 6 months, GF AgieCharmilles CUT 300 Year of manufacture: 2013 Charmilles Millenium Control Travel paths (X / Y / Z): 550 x 350 x 400 mm Travel paths (U / V): 550 x 350 mm Maximum taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Manual tank door (accessible from one side) Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Cutting speed: 340 mm²/min Best surface finish: Ra 0.10 µm Phsdpfx Ahsxwktmj Usa Available wire diameters: 0.15 to 0.33 mm Dimensions of the complete unit: 2600 x 2600 x 2340 mm Total weight of the unit: 3,300 kg The machine will be cleaned, fully overhauled, and functionally tested by us after the order is received. You will receive a 6-month warranty on the machine. We are happy to offer you commissioning of the machine.

Condition: good (used), Karl Tranklein Joint forming machine Machine in very good condition, ready for production. Technical data: Max. thickness: 9 cm Max. width: 50 cm Power supply: 230 V, 50 Hz Weight: 90 kg Phedovac T Uopfx Ah Uea

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 530 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, wire diameter (max.): 0.35 mm, number of axes: 5, wire diameter (min.): 0.1 mm, Main Drive Number of axis 5 Min. Wire Diameter 0.1 mm Max. Wire Diameter 0.35 mm Movement X-Axis Movement 530 mm Z-Axis Movement 400 mm Y-Axis Movement 350 mm This 5-axis ONA KE350 wire EDM machine was manufactured in 2002. It features X/Y/Z travels of 530 × 350 × 400 mm and U/V travels of 140 × 140 mm, supporting a maximum workpiece size of 1050 × 800 × 400 mm and weight up to 3000 kg. It includes high-precision closed diamond guides and capabilities for automatic wire threading and water temperature control. Consider the opportunity to buy this ONA KE350 wire EDM machine. Contact us for more information. Phjdox D D Taspfx Ah Usa Application Types EDM

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Vertex 2 Year of manufacture: 2007 Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface finish: 0.05 µm Ra Phjdpfx Ajxwb Stjh Uea Available wire diameters: 0.07 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Includes console with USB interface The machine will be cleaned, overhauled, and tested by us upon receipt of order. Commissioning and training can also be offered on request.

Condition: good (used), Sumbel Enano 150 gluing machine Phsdpfxju Umapj Ah Uja The machine is fully operational ready for production. Like a new one. It is the most valued brand among small gluing machines. An ideal solution for the production of covers, decorative packaging, etc. Production Germany. The machine works on cold glue Copper cylinders. Smooth adjustment: glue thickness, gap thickness. A set of separators, Simple cleaning without the need for tools. Working width 150mm 230V power supply Weight 30kg

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 1860 mm Measurements depth 1400 mm Measurements height 1800 mm Machine weight 1900 kg Main Drive Number of axis 5 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 220 mm Phsdex D Iifepfx Ah Uja V-Axis Movement 32 mm U-Axis Movement 32 mm Workpiece Workpiece weight 500 kg Additional Equipment Water purifier tank Central lubrication Paper filtration Working light This 5-axis Mitsubishi FX10K wire EDM machine was manufactured in 2001. It features a 32-bit CNC control, automatic wire threading, and a generator for brass wire cutting. Capable of handling workpieces up to 630 × 530 mm and 500 kg, it includes a water purifier tank and central lubrication. Reach out for more information about this machine. Application Types EDM

Condition: good (used), Corner cutter Zhengrun FD-QJ80 Very good condition. This is a professional, production device for rounding corners. Solid cast iron construction, strong pressure ensure precision of operation. Replaceable knives. Adjustable margins. Stack height 80mm Weight 270kg Phjdpfx Aevac Theh Uoa Efficiency 85 cycles/min Power supply 400V The waste is directed outside the machine. This is the currently produced model.

Condition: good (used), Hohner Favorit wire stitcher Very good condition, ready to work. A reliable machine, with legendary durability. Technical data: Podpfx Ahowungbo Uoha performance: 160-225 cycles / min sewing thickness: 25mm (piercing up to 40mm without closing the clamp from the bottom) wire diameter: max. 1mm Power supply: 380V Weight: 280kg The machine has an adjustable table for block and booklet sewing.

Condition: good (used), Renz Mobi 500 Semi-Automatic Spiral Binding Machine In perfect condition, manufactured in 2019. This semi-automatic spiral binding machine from the German company RENZ features: • Touchscreen control • The fastest setting changes for various work formats in this class via an electronic panel, which is particularly important for small, frequently changing runs • Spiral diameter adjustments from 1/4″ to 1 1/4″ (6.9 to 32.0 mm) using a knob • Hanger feeder • Quiet operation. No compressor required. • Working width: 105-500 mm Psdpfjxk U Insx Ah Uoha • Mobile, easy to move • Outfeed conveyor included • No special operator training required 230V power supply Weight: 550 kg

Condition: good (used), Semi-automatic spiral binding machine Renz Autobind 700 III Machine in very good condition, ready to work. Efficient semi-automatic for the production of calendars, notebooks and other products bound in metal spirals. Fast operation Supports spiral diameters in the range of 3/16”-1 1/8” Working width up to 700 mm Crimping thickness approx. 23 mm Efficiency up to 1200 cycles/h The semi-automatic unwinds the spiral from the spool, counts the stitches, cuts the spiral to the specified number of stitches and transfers the spiral section to the crimping zone. The operator places a calendar with previously made perforation on the table The calendar is automatically transferred to the crimping zone after pressing the pedal. Power supply 230V + compressed air Psdpfxswt Sume Ah Usha Weight 615 kg + cabinet with tools 300 kg.

Condition: good (used), Zechini Angolar M automatic corner cutter Production Italy. Perfect condition. This is a professional, production device for rounding corners and for cutting corners for hardcover. Pjdsvac Tnjpfx Ah Usha A solid cast iron construction, strong pressure ensure precise operation. Replaceable knives (7mm radius knife included) Adjustable margins. Stack height 50mm Weight 110kg Efficiency 40 cycles/min Power supply 400V This is the currently produced model.

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Perfect condition, purchased from a warehouse, used as a backup. Book press with groove burner. Manufactured by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Phjdpfxewud Tko Ah Uoa Weight 250 kg Power supply 380 V + compressed air.

Condition: good (used), Hang PiccoStar 102-50 eyeletting machine The device is in perfect condition, ready to work. Technical data: 1 eyeletting head (eyelet hole diameter 5.5mm, outer flange 8mm) Psdeu Umavspfx Ah Ujha Power supply 230V Frontal and side margins Push-button operation. The device punches holes and crimps the eyelet in one pass. Automatic eyelet feeding.

Condition: good (used), Horizon HCB-2 semi-automatic machine for producing hardcover books The machine is in very good condition, little used. The task of the machine is to produce a finished cover, assemble the book block into the cover and joint forming in the finished book. The machine is very easy to set up, operate and service. The machine is equipped with the following elements: touch control monitor table for mounting the cover with a laser pointer module for wrapping veneer edges ironing rollers barcode scanner Phodpfx Aju Umbash Uoa Technical data: – cover size: max. 680.6×340.8mm; min. 322.4 x 169.7 mm – spine thickness: min. 3mm; max. 25mm – cover weight range: 105 – 160 g/m2 – speed: max. 150 cycles/hour – dimensions: 1,800 x 1,050 x 1,536mm – weight: 456kg Power supply: 230 V / 50 Hz instruction manual included and a large set of materials. Ask About The Product

Condition: good (used), Schmedt PraLeg HHS 1815 XL Case in machine Machine in perfect condition, purchased from the national library. Practically unused. The machine suspends the book block in a prepared hard cover. Two gluers, smooth adjustment of glue thickness. Phedpfowud S Tex Ah Uoa The machine has full documentation with a CE certificate. Format: Block height: 80 – 440 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Efficiency approx. 200 – 300 pcs/h Power supply 230V Weight 300 kg