Used Wire Cuting Forming for sale (5,897)

Condition: ready for operation (used), BTO 215 spring coiling machine + AB1 decoiler cap wire diameter: 0,4 1,5 mm Pgjdpfx Adswrt T Ueijw winding diameter: max 45 mm max spring length: 100 mm max length of leg: 60 mm speed: 80 m/min power: min 3 kW / max 5,2 kW length: 1300 mm width: 900 mm height: 2000 mm weight: 700 kg

Condition: good (used), functionality: fully functional, A Thermobend 2000 is a bending machine used for bending plastic sheets such as PMMA (acrylic glass) and methacrylate. The machine operates with heating wires to heat and bend the sheets at specific locations. Key features Pgodpfjxn T Nrex Adiew Capacity: The machine has a usable length of 2000 mm. Functionality: Can bend sheets with a thickness of 1 mm to 20 mm. Configuration: Equipped with 2 bending beams heated both from above and below. The distance between the wires is adjustable, with 3 wires above and 3 below per group. Dimensions: Length: 3200 mm x Width: 1000 mm x Height: 1600 mm Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Financial information VAT/margin: Margin: The listed price includes VAT (VAT is non-deductible for businesses).

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Pgjdjxtwddspfx Adiow

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Pgjdsmk S Slopfx Adijw Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language.

Condition: used, Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor with tachometer dynamo and cooling fan Pedpfx Ajq Rxz Tedijgw -Engine: Type GLF 100/13 -Voltage: 170/200V -Power: 6.5 kW -Speed: 3000 rpm -Tachometer dynamo: Hübner TDP 0.2 T-4 60V 1000/max. 9000 rpm -technical Data: see photo of nameplate -Shaft: Ø 28 x 45 mm -Design: B5 -Dimensions: 640/250/H390 mm -Weight: 57 kg

Year of construction: 2006, condition: used, Ultrasonic and electrolyte cleaning, wire cleaning line, wire cleaning plant, wire treatment plant Manufacturer: Sirio-Wire Type: M0209 Psdpfx Adof Nku Reiegw Number of wires / cores: 12 (6+6) Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying. Year of construction: 2006 The plant was only in operation for about three years, then the production was moved to another location. Process: Ultrasonic and electolytic cleaning in a hot bath. On the manufacturer's website siriowire you will find a detailed description of the process under "Ultrasonic and Electolytic Cleaning". The unit is in good working condition and is complete except for the pumps. On the photos the catwalk for the operator and the collecting basin in which the plant stands are missing, these photos are still supplemented. On the last three photos you can see plants of this design in operation.

Condition: good (used), Zip Wire closed spiral in spools Pgjdpfx Adewunmbsiow 3 pallets of spirals, 12 whole new spirals + 12 started. In 3:1 and 2:1 spacing. Sold only in whole.

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. Podsxghngjpfx Adiogw It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: used, Line for forming cevapcici and cevapi (grinder with mixer, portioning device and belt transporter) Psdpjg Atrvjfx Adiogw

Condition: used, Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A Pgsdpfofcl H Uex Adijw -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg

Condition: used, Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A Pgsdpfx Aefcl H Iodiew -Dimensions: 275/275/H225 mm -Weight: 8.1 kg

Condition: like new (used), Year of construction: 2021, operating hours: 1,657 h, load capacity: 1,250 kg, lifting height: 7,000 mm, fuel type: electric, mast type: triplex, construction height: 3,200 mm, Manufacturer + model: JUNGHEINRICH EFX 413 Mast: X + i - 120 - 3F7000 ID: 25101.6261 Category: Used Mast: 3F7000 Forks: 1200 mm Lowered height: 3200 mm Lifting height: 7000 mm Capacity: 1250 kg Year: 2021 Operating hours: 1,657 hours Pgsdpfxsxrrbbo Adiow Battery: 48 v / 750 ah Options: - VNA truck - with wire guidance Condition: LIKE NEW!!

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, workpiece weight (max.): 2,500 kg, travel distance X-axis: 1,550 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 500 mm, empty load weight: 15,100 kg, Submitting a bid obliges you to collect the item on time on 15.12.2025! The original price of the machine was EUR 337,000! TECHNICAL DETAILS Travel X-axis: 1,550 mm Travel Y-axis: 1,040 mm Travel Z-axis: 500 mm Travel U-axis: 500 mm Travel V-axis: 500 mm Max. workpiece size: 1,800 x 1,250 x 500 mm Max. workpiece weight: 2.5 t MACHINE DETAILS Dimensions & Weight Machine dimensions: 5,300 x 4,440 x 3,180 mm Machine weight: 15.1 t Pgodpfxoxy Rzvj Adisw

Year of construction: 2024, operating hours: 15 h, condition: like new (used), functionality: fully functional, Imported from china to the uk 2025. Upgraded power, control and control panel wiring to UK/Eu specifications. Brand new and comissioned. fully automated and fully adjustable output to a maximum of 15meters per minute. Saftey pull cord and E stop system installed Pgsdpfx Adjxl U Scsiow

Condition: used, Year of construction: 2022, Excetek HD30Z EDM Hole Drill. S/No. MH22300003 (2022) Location: These lots are located in Birmingham, UK. Pgodpfx Aexx Sz Iodijw A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. (This Lot is Lot 11 of Auction 3425A on our Cottrill & co website - Ending 27th November 2025 at 3pm)

Condition: as good as new (ex-display), Year of construction: 2018, Complete powder packing system for manufacturing and filling bags up to 25kg. The plant was purchased in 2017/2018 and has never been installed. The system comprises of the following equipment: Pgjdevlgq Ijpfx Adijw 1 x Entecon 1000L stainless-steel powder storage tank. 1 x Entecon AMC blower conveyor with control box. 1 x All-Fill S10 powder filler with agitator and outfeed (2017). 1 x Gainsborough Engineering Co. GV5 vertical form, fill and seal bagging machine (2018) fitted with Markem Imaje Smart-Date X60 thermal printer. Sealing bars - 620mm (horizontal) and 800mm (vertical). 1 x Gainsborough Engineering Co. mobile outfeed conveyor. Infeed - 200mm. Outfeed - 1000mm.  1 x OCS Checkweighers GmbH HC check weigher (2017) to weigh up to 60kg. Type - HC. Weigh table dimensions - 1000mm long x 790mm wide. Footprint of full system (including space required to operate it safely) - 9m long x 4m wide x 6m high. Please enquire for more photos and technical specifications about the system. Viewings welcomed.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 160 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 150 mm, overall weight: 2,200 kg, In working condition, removed from production, documentation available. Pgjdpfexyyrqox Adisw

Condition: used, Year of construction: 2019, functionality: fully functional, Rated voltage: 220/380 V; Current: 30 A. The vacuum forming machine comes with its own wood cutter/former (see pictures). Pgsdpfsxzpw Ejx Adijw

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 11516, workpiece weight (max.): 10,000 kg, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 700 mm, empty load weight: 19,500 kg, Submitting a bid obligates you to collect the machine on time on 15.12.2025! The original purchase price of the machine was EUR 400,000! TECHNICAL DETAILS Travel X–Y: 2,000 x 1,300 mm Travel Z: 700 mm Travel U–V: 500 x 500 mm Maximum workpiece dimensions (X, Y, Z): 2,450 x 2,000 x 700 mm Maximum workpiece weight: 10,000 kg Taper cutting angle 400 mm: ±30°/400 mm Taper cutting angle 600 mm: ±20°/600 mm Position resolution (X, Y, U, V): 0.001 mm Minimum programmable increment: 0.001 mm MACHINE DETAILS Machine weight: 19,500 kg Pjdpfx Adexy Rxueijgw

Condition: used, Year of construction: 2022, table length 640 mm table width 540 mm 810 x 700 x 215 mm travel x / y / z 400 x 300 x 220 mm V-axis 120 mm U-axis 120 mm workpiece weight max. 500 kg Control M800 D-CUBES wire dia. 0,1 - 0,3 mm weight of the machine ca. ca. 3,1 t dimensions of the machine ca. 2,8 x 2,1 x 2,1 m Mechanical engineering concept: Hybrid design Machine included: - ODS - Optical Drive System - Tubular direct drives in XYUV axes - Linear scales in XYUV axes - Collision protection XYUVZ axes - Intelligent AT - Automatic wire threading for wire diameters 0.10 - 0.3 mm - Automatic fine hole search function - Easy 3D-Setup workpiece position detection - 5 controlled axes - prepared for additional axes - PFC - Precise Finish Circuit - H-FS - Finishing stage - LLS - Long Life System - 10 kg wire station - 4-sided framing table - hardened - Wire alignment block - Wire chopper - Compressor cooler Mitsubishi Electric M800 D-CUBES control system: - 19” full-touch monitor with gesture control - Hand pilot with configurable LCD display - Job planner incl. job interruption function Pjdpfx Ajvt Ec Sjdiogw - 3D CamMagic on board - Import of 3D Parasolid, 2D DXF / DWG - Graphic check: 3D, front and side view and top view - Operating and maintenance data output included - Interfaces: Ethernet TCP-IP, 2 x USB port - Corehole technology Incl. the following special options: - ERGO-Lux light Ergonomic workspace lighting with LED floodlight Two LED lights, 3 x 6 watts each IP67 version for use in the work area Anodized aluminium housing with reflector insert - Training course 5-day basic seminar at a Mitsubishi training center Mitsubishi training center for 1 person if attended within 12 months of commissioning. Travel and accommodation costs are at your expense - all dimensions, weight and performance data without obligation - Used machine without warranty - interim sale reserved -

Condition: ready for operation (used), machine for expanding and reducing tubes 3 heads no tooling included (can be supplied on demand) Pgjdpowrt Tzefx Adijw Dimensions: 1500 x 2000 x 2000 mm Weight: 1600 kg

Year of construction: 1992, condition: excellent (used), Roller Rolling Machine Make Abele & Höltich type BB 20 YEAR 1992 roll diameter 180 mm 5,5,kw 400 Volt space requirement : Pgodpsg Tcn Iefx Adijw W.2400 mm depth 2100 mm height 1800 mm Documents available

Condition: ready for operation (used), Year of construction: 2001, operating hours: 25,539 h, functionality: fully functional, machine/vehicle number: 0.2633/331852, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, total height: 200 mm, total length: 800 mm, total width: 500 mm, workpiece height (max.): 200 mm, type of input current: three-phase, overall weight: 2,200 kg, table load: 500 kg, positioning accuracy: 0.005 mm, Equipment: cooling unit, documentation/manual, fridge, CHARMILLES TECHNOLOGIES from 2001 Model: ROBOFIL 290 P Pedpev Rfm Sjfx Adijgw 0.25MM AND 0.30MM WIRE EROSION MACHINE MAKE AN OFFER TO BUY BACK Features: - Maximum part dimensions: 850 x 500 x 200 [mm] - Maximum weight: workpiece weight: 500 [kg] - X x Y x Z strokes: 400 x 250 x 200 [mm] - U x V stroke: 400 x 250 [mm] - clearance/height angle: ±30 [°] / 200 [mm] - wire diameter: 0.25 [mm] - acceptable coil types: P3 and P5 - tank capacity: 300 [l] - generator: 10 [kVA] - 400/400V isolation transformer - dimensions: 1800 x 1600 x 2130 [mm] - weight: 2200 [kg]

Condition: ready for operation (used), machine for expanding and reducing tubes 1 head Podpfowrt Tujx Adiogw no tooling included (can be supplied on demand) Stroke: 150 mm Power: 11 kW Dimensions: 2200 x 800 x 1200 mm Weight: 500 kg

Condition: ready for operation (used), machine for expanding and reducing tubes 2 heads Pgodpfxowrt Tns Adiow