Used Copper Wire Drawing for sale (5,281)

Condition: ready for operation (used), Used and fully functional RMG 89 wire drawing machine: Max. diameter: 14 mm. Capstan diameter: 900 mm. Drawing force: 3,850 kg. Motor: 18.75 kW Speed: 21.25 m/min. Weight: 2,000 kg. Nlsdpfx Aajzx Rikszeg

Condition: ready for operation (used), Lot of Well Ascent copper coil/winding wire Various widths and thicknesses: 0.274 x 2.070, 0.190 x 2.760, 0.080 x 1.000, Nedpfxeym Amfs Aazelg and more. Total of 25 reels Copper wire weight: ~115 kg (approximate) Manufacturer: Well Ascent

Condition: good (used), Year of construction: 2000, For wire diameters from 1 to 5.5 mm Drawing drum diameter: 400 mm Drawing speed max. 25 m/min For screw manufacturing/cold forming Nljdpfjy N Df Nex Aazjg

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Machinetype: multiple wire drawing machine - dry Info: straight through Make: VEB Type: 8 Block Constr. year: Njdpfswi Tidsx Aazslg inlet wire diameter: 2,5 mm finished wire diamter: 0,8 mm number of drafts: 8 diameter of capstan: 400 mm speed -meters/sek: 15 m Location: Europe

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, TEUREMA EHS-110 WIRE DRAWING LINE Year of manufacture: 1999 Maximum speed: 10 m/s Total installed power: 230 kW TEUREMA EHS-110 wire drawing line with robust construction, equipped with a Tecno Impianti drawing bench and prepared for industrial use. The machine has undergone a complete electrical modernization, including a new main electrical panel, Siemens S7-1500 PLC, Siemens 1200 HMI screen, 100% new wiring, and new push-button stations, which significantly improves the reliability, maintenance, and operability of the unit. LINE COMPOSITION Coil stands - 2 tilting winders - Maximum capacity per winder: 3,000 kg Vertical winding tower - 6-meter tower - Lifting and lowering carriage with a hoist Mechanical decaling unit Soaping unit - Motor: 1.5 kW - Speed: 1,500 rpm TECNO IMPIANTI DRAWING BENCH - Number of steps: 2 - Two-ring coil: - 1st ring: Ø 610 mm - 2nd ring: Ø 760 mm - 3-speed gearbox: - 3.90 m/s - 7.20 m/s - 10.00 m/s - Power: 160 kW - Frequency: 50 Hz Horizontal coiler - Horizontal drive - Maximum coil capacity: 3,000 kg Nedpfxezycake Aazolg - 2-speed gearbox: - 7.3 m/s - 10.0 m/s - Maximum coil diameter: Ø 1,200 mm - Core diameter: Ø 600 mm - Usable width: 900 mm - Power: 45 kW TECHNICAL DATA - Inlet diameter: 5.5 to 14 mm - Outlet diameter: 4 to 12 mm - Number of blocks: 1 vertical - Maximum line speed: 10 m/s - 2 CL30 A 33 Eurolls cassettes - Rollers: Ø 150 x Ø 90 x 15/20 mm - Total machine power: 230 kW - Frequency: 50/60 Hz ELECTRICAL AND AUTOMATION UPGRADE - Completely new main electrical panel - Siemens S7-1500 PLC - Siemens HMI 1200 screen - 100% new wiring - New push-button stations - New programming AVAILABLE SERVICES Possibility of supply with: - installation - assembly - commissioning - technical assistance - adaptation according to customer needs

Condition: refurbished (used), Year of construction: 1999, In Line WIRE DRAWERS RMG 45 Used and revised to new. Operational. Manufacturer: RMG Type: 45 Max. Ø (mm.): 8 Nodsyrdznspfx Aazolg Capstan Ø (mm.): 500 Max. Speed (m/min.): 36 Year: 1999 Available at H.B.R. srl - Italy Cheaper Price

Condition: good (used), Single Head Capstan Block Wire Drawing Machine Nljdpfx Aaet Ixkzjzjg Maximum Inlet Wire's Diameter: 30 mm

Condition: used, functionality: fully functional, machine/vehicle number: D20E/7694, Offer Number: D20E/7694 Machinetype: multiple wire drawing machine - dry Make: SKET / MILL Nljdpjwi S Ixsfx Aazog Type: 8 BLOCK Constr. year: inlet wire diameter: 6,5 mm finished wire diamter: 1,6 mm number of drafts: 8 diameter of capstan: 550 mm and 650 mm speed -meters/sek: 8-12 Location: Europe

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Nljdpfxor Nfvme Aazjg Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 31.07.109.22, functionality: fully functional, operating hours: 1,200 h, power: 3 kW (4.08 HP), input voltage: 230 V, input current: 20 A, input frequency: 50 Hz, type of input current: DC, volume flow: 1,450 m³/h, intake vacuum (max.): 2,400 mbar, suction capacity: 3,200 m³/h, intake manifold diameter: 160 mm, filter area: 20 m², noise level: 70 dB, actuation type: pneumatic, total height: 2,005 mm, total length: 1,775 mm, total width: 898 mm, overall weight: 370 kg, year of last overhaul: 2022, Equipment: CE marking, documentation/manual, PRICING & CURRENCY NOTICE FOR UK BUYERS: Headline price is €5,000 due to platform limits. Actual price is fixed at £4,250 GBP. UK Buyers: Fixed at £4,250 GBP via BACS bank transfer. No conversions. Overseas Buyers: Must clear into our UK bank as exactly £4,250 GBP net of all fees. 📌 COLLECTION LOCATION NOTICE: The machine is NOT at our registered account/billing address. Location: Private workshop just outside West Calder (rural area), West Lothian, Scotland. Access: Ample space and suitable access for vans, flatbeds, and collection couriers. Full Address: Provided directly to the buyer upon formal agreement of sale. Overview & Provenance: For sale due to a complete workshop closure. This premium Felder RL 160 clean-air dust extractor was purchased brand new directly from an official Felder dealership. One private owner from new. Meticulously maintained and looked after in a clean workshop environment. Clear Title & Ownership: Originally financed through Novuna over a 4-year term. All payments are fully complete as of August 2026. The machine is sold with 100% clear title, free from any financial encumbrances or liens. Official settlement confirmation can be shown upon request. Rare Single-Phase Configuration: Factory-built single-phase (230V) machine. Maximum operational current draw of 19.7A (requires a 25A backup fuse circuit, typically running on a 16-amp industrial socket). Ultimate plug-and-play setup for high-end home workshops or sites without 3-phase power. Premium Factory Upgrades & Accessories: • Pneumatic Filter Cleaning: Factory-fitted Jet-Pulse automatic compressed-air cleaning system. Blasts dust from inside filters to ensure maximum, constant suction and extend filter life. • Integrated Mobile Chassis: Factory heavy-duty caster wheel kit for effortless movement. • Dry-Air Protection Kit: Inline moisture filter and integrated pressure gauge. Ensures air supply is clean, dry, and regulated, fully protecting filters from moisture damage. • Pneumatic Pipework: Extra lengths of plastic compressed-air piping included alongside currently fitted pipework for immediate setup. Technical Specifications: • Certification: H3 Certified (Residual dust < 0.1 mg/m³ for clean indoor workspace air). • Max Airflow: 3,200 m³/h • Intake Vacuum / Negative Pressure: 2,400 Pa • Extraction Port: 160 mm • Filters: Original Felder filters, used but in perfectly fine, clean operational condition. • Noise Level: Exceptionally quiet 70 dB operational sound pressure level. Nodpezvh Dyjfx Aazslg Transaction & Returns Terms: • Price: £4,250 (No VAT to add / Private Sale). • Payment: Strictly via secure Direct Bank Wire Transfer (BACS / IBAN / SWIFT). No PayPal, cheques, or cash-on-delivery couriers. • Shipping: Buyer must independently arrange, insure, and pay for all transport logistics. Machine released only once funds fully clear. • Returns: Private sale. Sold as described with no returns. Viewing and testing under power at the workshop is highly welcomed and encouraged.

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Nsdpfxjz Adnue Aazolg

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, paper weight (max.): 208 g/m², paper width (max.): 350 mm, paper height (max.): 500 mm, production capacity: 4,500 unit/h, No minimum price – guaranteed sale to the highest bidder! Auction of a brochure production line! TECHNICAL DETAILS Gathering towers Models: Horizon VAC-100a / VAC-100m Number of towers: 2 Stations per tower: 10 Feeder system: Air suction feeder Voltage: 230 V Frequency: 50 Hz Current draw: 10.4 A per section Booklet making and folding module Model: Horizon SPF-200A Voltage: 230 V Frequency: 50/60 Hz Current draw: 3.4 / 3.2 A Booklet making heads: 2 Brochure thickness: up to 4.5 mm Functions: Wire stitching and center folding Front trimmer Model: Horizon FC-200A Function: Automatic front trimming Operating mode: Inline operation with Horizon SPF-200A Cutting quality: High-precision cut Stacking unit Model: Horizon ST-40 Voltage: 230 V Frequency: 50 Hz Current draw: 4.7 A Function: Automatic stacking of finished brochures Production capacity: max. 4,500 brochures/h Feeder stations: 10, expandable to max. 60 Nlodpszy Hhxjfx Aazeg Sheet format max.: approx. 350 × 500 mm Paper weight: 52–208 g/m² Booklet thickness: max. 2 mm for saddle stitching Processing: Gathering, stitching, folding, and stacking in one system MACHINE DETAILS Production counter: approx. 1,800,000 brochures EQUIPMENT Horizon VAC-100a gathering tower Horizon VAC-100m gathering tower Horizon SPF-200A booklet making and folding module Horizon FC-200A front trimmer Horizon ST-40 stacking unit Data sheets for the individual components of the system, including further detailed technical data, can be found in the appendix.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1154, total height: 2,040 mm, total length: 2,200 mm, total width: 1,770 mm, type of input current: three-phase, table width: 400 mm, overall weight: 3,100 kg, table length: 600 mm, table height: 220 mm, empty load weight: 2,800 kg, table load: 450 kg, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, The Sodick AQ325L wire EDM machine was manufactured in 2002 by the Japanese company Sodic Co., Ltd. This is a precision CNC machine designed for cutting various shapes in conductive materials using the EDM (Wire Cut) method. This model combines a compact design with high machining accuracy, making it ideal for both single and serial production, especially for manufacturing parts with complex geometries. The machine offers a working area capable of machining parts with dimensions up to 350 × 250 × 220 mm and a weight of up to 450 kg. The stable construction and precise axis guidance ensure high repeatability and cutting accuracy, even with demanding materials and complex contours. Additional U and V axes allow for tapered cuts up to 20°, which significantly expands the technological capabilities of the machine. The Sodick AQ325L EDM machine operates with wire diameters ranging from 0.15 to 0.30 mm, offering adjustable wire tension over a wide range and a high wire feed rate, resulting in efficient and stable machining. The immersion system enables operation in a dielectric fluid, increasing the surface quality and dimensional accuracy of the machined parts. The Sodic AQ 325 L wire EDM machine is equipped with an efficient dielectric system with a capacity of 530 liters, featuring a filtration system based on replaceable paper filters and a deionizer, which guarantees the maintenance of appropriate operating parameters and a long service life for the components. The ergonomic table height and well-thought-out design facilitate operation and the preparation of parts for machining. Nljdpfxez Az Uvs Aazeg Thanks to its robust construction, high weight, and proven technology from the manufacturer Sodick, the AQ325L model is a reliable solution for tool shops, production facilities, and companies involved in precision metalworking. Specifications of the Sodic AQ 325L Wire EDM Machine - Table travel (X / Y axis): 350 × 250 mm - Z-axis travel: 220 mm - Auxiliary table travel (U / V axis): 80 × 80 mm - Working table size: 600 × 400 mm - Working tank dimensions: 895 × 650 mm - Maximum workpiece height: 220 mm - Maximum workpiece height during immersion machining: 200 mm - Maximum workpiece weight: 450 kg - Maximum workpiece weight during immersion machining: 300 kg - Distance from the floor to the top surface of the table: 965 mm - Taper / cutting angle: 20° / 80 mm - Wire tension: 300–2300 g - Max. wire feed rate: 250 mm/s - Wire diameter: 0.15–0.30 mm - Max. wire spool weight: 6 kg - Machine dimensions (W × D × H): 1650 × 1900 × 2040 mm - Overall machine dimensions: 2250 × 2200 mm - Machine weight: 2800 kg Dielectric tank - External dimensions (W × D × H): 550 × 2200 × 1770 mm - Weight of empty tank: 230 kg - Capacity: 530 l - Deionizer: 10 l Filtration system: 2 replaceable paper filters - Layout / arrangement as shown in the drawing - Total length of the system: 3000 mm - Total width of the system: 3500 mm - Power supply: 3-phase AC 220V (50/60Hz)

Year of construction: 2021, condition: like new (used), functionality: fully functional, Component 1: ATM-800 P Tangential Dereeler (2 pieces) Heavy-duty dereeler for controlled unwinding of copper wire coils. • Max. coil diameter: 800 mm • Max. coil width: 300 mm • Pickup hole: Ø52 / Ø56 mm • Max. coil weight: 300 kg • Braking force: 100 - 2000 N • Brake torque: 3 - 800 Nm • Max. speed: approx. 5 rpm • PLC control with torque sensor Component 2: HBK-40-S Automatic Taping Machine Professional automatic taping machine for coil and conductor insulation. • Servo-controlled taping head • Operator terminal and display • Integrated X-axis guidance Nedpoz Ap R Iefx Aazolg • Electric hysteresis brake • Automatic overlap control via encoder • Suitable for various insulation materials

Condition: like new (used), Year of construction: 2004, functionality: fully functional, overall weight: 4,000 kg, total height: 2,100 mm, total width: 6,200 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,800 mm, input current: 1,250 A, Siemens Sikus Type 3200 Power Distribution Panel Sub-distribution switch cabinet, distribution panel, power distribution board 400V 1250A (for further information, please refer to image 21) Nlsdpoynv H Ijfx Aazsg 9x single cabinets 600mm – 1x 800mm = total length 6200mm (contrary to the drawing: 10x 600mm!!) Cabinet dimensions approx. H210xW60/80xD60cm each, incl. plinth and lifting eyes Connection from transformer 1250A to circuit breaker (Siemens 3WN6361-DWA05-1KA1) with coupling switch etc. (images of the circuit diagrams are attached). Three identical Siemens circuit breakers are installed. Equipped with multiple transformer metering on the main switch and residual current monitoring Busbar rated up to max 1600A Outgoing circuits: circuit breakers – Neozed NH00, NH1 fuses, etc. Excellent condition – almost as new – see pictures The dismantling was carried out by a professional electrical company. All copper busbar connectors and screws are included. Internal wiring for energy metering is pulled back and labeled. The cabinets are dismantled and packed on 5 pallets. Weight approx. 4000kg Collection only by appointment in 75053 Gondelsheim Forklift available for loading Shipping by freight forwarder possible, please inquire with ZIP code

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, Complete production line for Chain Manufacturer - VITARI Njdpfx Aasyfg Tgjzslg Year - 1980 Line Consists : 1.Wire drawing machine SKP8 T.I. 95647 1.1. Producer: Tecno Impianti 1.2. Model SKP 8 2P Serial Nr 9564/7 1.3. Year of production 1995 -1999(depends on condition) 1.4. Country of origin Italy 2.Bending machine for roundlink chain production 2.1. Producer:Abbondio Vitari S.p.A . 2.2. Model CC18 2.3. Year of production 1973-1987 2.4. Country of origin Italy 3.Contact welding machine for roundlink chain production 3.1. Producer:Abbondio Vitari S.p.A . 3.2. Year of production 1978-1981 3.3. Country of origin Italy 4.Contact welding machine for roundlink chain production 4.1. Producer:Abbondio Vitari S.p.A . 4.2. Year of production 1978-1981 4.3. Country of origin Italy 5.Calibrating machine for roundlink chain production 5.1. Producer: Delmatic SNC 5.2. Model KTR 1 5.3. Serial Number K113-06-05-7 5.4. Year of production 2006-2007 5.5. Country of origin Italy 6.Manual contact welding machine for roundlink chain production 6.1. Model N12 6.2. Producer: CEA COSTRUZIONI ELETTROMECCANICHE ANNETTONI S.p.A. 6.3. Year of production 2005-2007 6.4. Country of origin Italy Partly renewed (Pneumatic system, cooling system, etc) Production tool included For today got 6 same type lines, ready to use, ready for check. Any of them can be connected for check up. Delivery to EU included in price Our company also offers training and, if required, start-up services for putting the line into operation

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. Nljdpfx Aaewrp Emjzeg The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the las

Condition: used, Trumpf TRUMPF TruDisk 6602 (4C) High-Power Disk Laser with up to 6.6 kW Type: TruDisk 6602 (4C) The TRUMPF TruDisk 6602 (4C) is a high-performance disk laser offering approximately 6.6 kW of continuous power output – perfectly suited for welding, cutting, and surface treatment processes for metals such as steel, aluminum, copper, etc. System type: TruDisk 6602 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: November 2012 Drawing number: 20-10-02-A5 No further in-house inspection has been performed. Operating hours could not be read out. The laser was operating flawlessly until decommissioning. Key Technical Features: • Power: Continuously adjustable from 80 W up to 6,600 W, max. 6.6 kW for machine tool applications • Beam quality: < 2 mm·mrad for excellent focus handling • Wavelength: 1030 nm (infrared), adaptable to green wavelength for specific models • Output options: Up to 4 laser outputs (4C) for simultaneous supply of multiple process cells • Cooling system: Integrated heat exchanger (up to 28°C inlet temperature), optional compressor cooling (up to 38°C) • Modular and service-friendly: Compact footprint (< 1 m²), modular components for fast maintenance and service Benefits & Applications • Maximum process stability: Real-time power regulation ensures reproducible results • Reflection resistance: Patented resonator design enables welding of reflective metals such as copper and aluminum Nljdpfx Aozii D Ieazeg • Industry 4.0 ready: Sensor-integrated monitoring system, OPC-UA interface for condition monitoring & predictive maintenance • Energy efficiency: Up to 50% reduction in power consumption thanks to intelligent pulse control and energy-saving modes • Versatility: Application range includes welding (including BrightLine for nearly spatter-free seams), cutting, hardening, casting processing, additive manufacturing, laser wire deposition welding, and more Suitable Use Cases: Ideally suited for industrial high-power laser applications: Application | Features ---|--- Automotive structural part manufacturing | Deep penetration welding with high reproducibility Copper welding | Particularly suitable with green wavelength (> 95% spatter reduction) Remote hybrid welding | Fast processing of large surfaces with robust beam Additive manufacturing & hardening | Enabled by excellent beam quality and compact design Main Technical Data Property | Specification ---|--- Laser power | Up to 6,600 W (6.6 kW), continuous Beam quality | < 2 mm·mrad Wavelength | 1030 nm (infrared) Number of outputs (4C) | Up to 4 simultaneously usable fiber outputs Fiber connector diameter | 100–600 µm (depending on configuration) Beam delivery | Fiber-based, passive (no deflection mirrors required) Cooling | Water/air-cooled, internal or external chiller Dimensions | Approx. 1000 × 800 × 2100 mm (W×D×H, variant-dependent) Weight | ~800–1200 kg (excluding cooling) Power supply | 380 V - 10% ... 460 V +10%, 3-phase AC + PE, 38 kW / 41 kVA, 59 A / 400 V, 50–60 Hz Control | TruControl 1000/3000, OPC-UA interface Safety standards | Laser safety class 4 according to EN 60825-1 Weight: approx. 1200 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data. Information may be subject to alteration!) We are happy to answer any further questions you may have by phone.

Condition: new, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15VWL1032, The machine includes fixtures for the production of electrical couplings in the following range: 250 - 800 mm SDR11 355 - 1200 mm SDR17 900 - 1200 mm SDR26 Original MSA drawings are also included. The VWL 1200 is a CNC controlled vertical three-axis electric pipe laying machine designed for laying medium to large fittings or pipes. The machine can produce fittings typically in the 250 to 1400 mm internal diameter range (1400 mm SDR17). An optional 2-axis CNC drilling unit is available for drilling fusion indicators during the wire laying cycle or for drilling end holes during the external profiling cycle. The VWL 1200 uses special fixtures that clamp onto an innovative feature that is integral to the coupling design, so that there is a separate fusion zone in each half of the coupling. The process of laying the wire starts at one clamp at the end of the coupling. The wire is inserted with twice the required pitch at the end of the fusion zone, whereupon the tool system rotates and then moves in the opposite direction between the first laid pitch until it reaches the resting position at the second clamp. The process is completed at the second part of the coupling. Nlodpfxeu Itk Ro Aazsg The VWL 1200 system is designed to allow the loading and unloading of larger couplings (which can weigh up to approximately 300 kg even before the wire is inserted). The machine has a completely open top, which allows easy loading overhead using a gantry system. Alternatively, parts can be loaded through the extra wide operator's door using suitable gripping and handling equipment.

Condition: used, Year of construction: 2015, Agie Charmilles Cut 300 SP Wire-Cut EDM. Serial No. 591.063.002.0159 (2015). Country of Origin: Switzerland Nodpfxjz Ar Ago Aazelg Location: These lots are located in Swindon, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Lot 2 of Auction 3505

Condition: excellent (used), Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire Feeder Nljdpfeg T S Tajx Aazeg Plain Text Display Press Force Monitoring Wire Straightener Bosch Stripping Machines Bracket and Brush Motor with Mounted W32/1-32 Tool Soundproof Cabin Drums of Copper Wire with Stamped Parts Control Cabinet Item Condition: Very Good Manufacturer's Description, Deviations Possible. You are purchasing the machine as shown in the pictures. Complete factory closure, large selection of storage platforms, pallet racks, shelving units, and paternosters. High-quality industrial machines, lathes, grinders, and hand tools. Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Condition: excellent (used), Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire Feed Plain Text Display Press Force Monitoring Wire Straightener Bosch Stripping Devices Bracket and Brush Motor with Attached W32/1-32 Tool Soundproof Cabin Barrels of Copper Wire with Punched Parts Control Cabinet Technical Specifications: Drive Power: 7.5 kW Speed (min. - max.): 40-250 rpm Press force / punching unit: 200 kN Longitudinal feed: 250 mm Longitudinal strip width: 50 mm Wire diameter: 6.0 mm Machine weight: 3500 kg Dimensions without electrical components (L x W x H): 3600 x 1500 x 2400 mm Item condition: very good Manufacturer's description, deviations possible. You are purchasing the machine as shown in the pictures. Complete factory closure, large selection of storage platforms, pallet racks, shelving units, and paternosters. Nodpfx Aajg T S Tdozelg High-quality industrial machines, lathes, grinders, and hand tools. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more punching and bending machines - new and used - in our shop! International shipping costs upon request!

Condition: excellent (used), Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire Feed Plain Text Display Press Force Monitoring Wire Straightener Bosch Stripping Devices Bracket and Brush Motor with Attached W32/1-32 Tool Soundproof Cabin Drums for Copper Wire with Punched Parts Control Cabinet Drive Power: 7.5 kW Speed (min. - max.): 40-250 rpm Press force / bending slide: 80 kN Press force / punching unit: 200 kN Longitudinal feed: 2050 mm Longitudinal belt width: 50 mm Nlsdpfx Aaog T S Ttezog Wire diameter: 6.0 mm Machine weight: 3500 kg Dimensions without electrical components (LxWxH): 3600 x 1500 x 2400 mm Item condition: very good Manufacturer's description, deviations possible. You are purchasing the machine as shown in the pictures. Complete factory closure, large selection of storage platforms, pallet racks, shelving units, and paternosters. High-quality industrial machines, lathes, grinders, and hand tools. Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2002, functionality: fully functional, REF: MM6296 1 x Offshell Services Ltd twin-lane shellfish peeling machine with 2 x Podmores feeding hoppers. Technical specification ⚙️ ✅ Manufacturer – Offshell Services Ltd. ✅ Model – The Offshell Press MK V (Peeler). ✅ Date of manufacture - 2002. ✅ Configuration – Twin units mounted side-by-side. ✅ Construction – Stainless steel and aluminium frame. ✅ Power – 3-phase electric supply. ✅ Operation – Mechanical off-shell press for food processing applications. Njdpfx Aaoxuhw Dezelg ✅ Condition – Used, average wear, complete with manual / electrical drawings. Decommissioned and packed for transport

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2278358, type of input current: AC, total height: 2,500 mm, total width: 3,000 mm, total length: 1,200 mm, overall weight: 900 kg, For sale is a SCHUNK Sonosystems LS-C 9 kW ultrasonic welding system in very good condition. The system was used exclusively for development and laboratory purposes and was not used in series production. Accordingly, the machine is in very good technical and optical condition and is almost like new. The LS-C is a universal ultrasonic welding system for joining copper and aluminum conductors with contact parts, busbars, and flat contacts. Due to its flexible system concept, it is particularly suitable for development departments, technical labs, prototype manufacturing, and small series applications. Technical data Manufacturer: SCHUNK Sonosystems GmbH Model: LS-C laboratory system Ultrasonic generator: 9 kW Frequency: 20 kHz Voltage supply: 3 × 400 V, 50/60 Hz Compressed air requirement: 6.5 bar Welding range: flexible Al conductors approx. 25–160 mm² and Cu conductors approx. 25–120 mm² (application-dependent) Equipment Dynamic process control Monitoring of welding height, energy, and welding time PC-based user interface with Windows system Memory for over 10,000 applications and process data sets Network capability and data export Soundproof enclosure Nsdpfx Aaezzaxaszslg Force sensor Universal anvil Welding pressure cylinder combination Ø 80 mm and Ø 125 mm Complete vibration system for 95 mm² Cu conductors Cable clamps and stranded wire end stop CE-compliant design Also included in the scope of delivery Tool set for 50 mm² conductors Tool set for 70 mm² conductors Condition The machine was used exclusively in development and laboratory operations and was not subjected to continuous production loads. Accordingly, the operating hours are low and the system is in very good condition. Application areas Development and prototype construction E-mobility and battery technology Cable assembly Laboratory and technical lab use Pre-series and small series production Inspection and functional demonstration possible by arrangement. Technical documentation and further images are available upon request.