Used Wire Cut Edm Machine for sale (66,512)

Condition: like new (used), Year of construction: 2008, operating hours: 1,120 h, Controller ARISTECH (similar as FANUC) Number of axes: 4 Table size 640 x 470 mm X Axis Travel 425 mm Y Axis Travel 300 mm Z Axis Travel 250 mm Hedpovvl Uajfx Abdji Max workpiece size 800 x 600 x 250 mm U Axis Available:standard Weight cca 3000 kg Dimensions LxWxH = 1860 x 2050 x 2100 mm The machine consist of following units 1. EDM machine 2. Controller cabinet 3. Water tank and pump 4. Water cooler 5. Transformer 6. Transformer Nr.2 (power supply) The machine was barelly used. Still unter power. It will be due to company liquidation.

Condition: like new (used), Year of construction: 2018, operating hours: 2,700 h, functionality: fully functional, machine/vehicle number: MR24D1056, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 295 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 800 mm, empty load weight: 3,500 kg, tank capacity: 860 l, Equipment: documentation/manual, For sale: Mitsubishi MV2400R precision wire EDM machine (2018), in excellent technical condition, continuously operated, fully functional, and ready for immediate use – very low operating hours (only 2,700 hours). Technical Specifications: - Year of manufacture: 2018 - Manufacturer: Mitsubishi Electric - Model: MV2400R - Control system: Mitsubishi M700 Series - Axis travel (X/Y/Z): 600 / 400 / 310 mm - Max. workpiece dimensions: 1050 × 800 × 295 mm - Max. workpiece weight: 1,500 kg - Worktable size: 840 × 700 mm Hedpsxu Hvljfx Abdji - Wire diameter: 0.1 – 0.3 mm (0.25 mm currently in use) - Positioning accuracy: ±1 µm - Power supply & cooling: complete and fully functional - Machine dimensions (L×W×H): 2687 × 3030 × 2150 mm - Weight: approx. 3,500 kg Equipment and Accessories: - Original upper and lower wire guides - Automatic Wire Threading (AWT) - Filter tank with ion-exchange resin - Complete set of clamping and locating devices (in carrying case) - Wire alignment device - Original operation manuals and documentation Additional accessories purchased for over €10,000: - Wire guides for 30° angle cutting (upper and lower) - Processor battery - Precision workpiece clamping vise - 0-600 PSI pressure gauge (2 pcs) - MV power contact (259320) (2 pcs) - CF card with software - 0.25 mm EDM wire – 3 new spools - 2 sets of new filters - Machine transport and handling system Condition: The machine is well-maintained, regularly serviced, and ready for immediate operation. Complete filtration and cooling systems included. We offer assistance with transport, installation, and commissioning of the machine, as well as operator training – we are EXPERIENCED. Price negotiable. VAT invoice available. Export (0% VAT) possible.

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 03DR2150, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total length: 2,687 mm, total width: 3,030 mm, overall weight: 3,500 kg, Equipment: cooling unit, Wire-Cut EDM Machine The machine comes from productive operation and is in fully functional, used condition. All relevant assemblies are complete; the generator cabinet, control system, wire feed, and AT system (Automatic Threader) are all present and complete. Running times according to control system: Processing time: approx. 29,062 h NC on-time: approx. 43,836 h Ready-/TFT downtime: approx. 8,966 h Maintenance records (excerpt): Filter change: last performed at 176 h / 200 h Resin change: 21 h / 1000 h Oil refill: 742 h / 1000 h Conductivity sensor: 742 h / 1000 h Current supply rotation: 57 h / 80 h The machine is complete but shows typical signs of use after more than 10 years in operation Accessories are extensive and well organized Servicing always confirmed as per control system Automatic threading system included Accessories / Equipment: Original Mitsubishi nozzle & roller/bearing kit: various guide rollers upper and lower diamond guides nozzle set (upper/lower nozzle) drying stones / assembly tools NSK/Japan replacement bearings spare tension rollers Manufacturer’s wooden box Mitsubishi Electric Spare and consumables: Hodpfex Hadvex Abdji resin container (packed) filter elements quick adhesive components A/B pH test strips process chemicals (for EDM) logbook / maintenance records Documentation / manuals: complete folders: Operator’s Manual MV Part 1 & 2 training materials “Advance Series” operating instructions (German) maintenance and AT maintenance sheets Travels (X / Y / Z): 600 × 400 × 310 mm Working table / workspace: table size: 840 × 640 mm (square table) max. workpiece dimensions: 1050 × 800 × 295 mm max. workpiece weight: 1,500 kg Wire data: wire diameter: 0.1–0.3 mm max. wire feed: 23 m/min tension: 0.5–25 N automatic threading (AT), including fine-threading Taper cutting: opto-linear T/C device, ±75 mm (X/Y), max. taper angle 15° at 260 mm workpiece height Generator / Control system: transistor-controlled pulse generator 15" LCD touch control 6-axis simultaneous control integrated 2D and 3D CAM (Parasolid viewer) NC memory up to 1 GB USB interfaces (2×) Dielectric system tank capacity: 860 l filter flow rate: 50 l/min paper filters (2 pcs) resin container 10 l (ion exchanger)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 591.063.002.0050, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,850 kg, table length: 900 mm, Equipment: documentation/manual, The AgieCharmilles CUT 300 Sp is a high-performance and versatile wire EDM, ideal for precision manufacturing of molds, prototypes, and complex components, offering: * extensive spatial travels Hedpjwwrk Nsfx Abdji * large dielectric capacity * ability for taper cutting * robust CNC control system.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 591.063.050.0035, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,850 kg, table length: 900 mm, Equipment: documentation/manual, Professional Wire EDM Machine AgieCharmilles CUT 300 (2012) Hedpfx Abswwq S Ssdji Premium wire electrical discharge machining center from GF AgieCharmilles, ideal for precision manufacturing, tool & die making, and aerospace applications.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 591.063.060.0016, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,800 kg, table length: 900 mm, Equipment: documentation/manual, The CUT P 550 model from 2017 is an advanced five-axis wire EDM machine, ideal for precise industrial applications: * wide angular range capabilities (up to 30–45°), * efficient and intelligent IPG generator, * accuracy within a few µm, Hjdpfx Aewwrtwobdji * advanced automation systems and anti-collision protection, * stable, durable design enabling fully automatic operation.

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 80.4055.0109, workpiece weight (max.): 1,000 kg, travel distance X-axis: 450 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 360 mm, table width: 700 mm, overall weight: 9,000 kg, table length: 500 mm, Makino EDNC 43 CNC Sinker EDM CNC sinker EDM machine (electrical discharge machining) Control: Makino MGF / MGF‑20 / MGF‑60 – stable and widely used in industry Working axes: X = 450 mm, Y = 350 mm, Z ≈ 350 mm Table: 700 × 500 mm, load capacity up to 1000 kg Hedpfxjwww Sxj Abdsi C‑Axis: full rotation – ideal for rotary electrodes

Condition: excellent (used), Year of construction: 2015, operating hours: 5,090 h, functionality: fully functional, machine/vehicle number: T0298, workpiece weight (max.): 850 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 250 mm, workpiece height (max.): 245 mm, workpiece length (max.): 670 mm, type of input current: three-phase, table width: 960 mm, input frequency: 50 Hz, Equipment: cooling unit, The Sodick VZ500L is a wire-cut EDM (Electrical Discharge Machining) machine from Sodick, designed for electro-erosive machining of metals. This is a wire-type machine equipped with linear drives, enabling precise cutting of intricate shapes at an angle based on CAD files (e.g., DXF, STEP, IGES). Main features: Type: Wire-cut EDM Manufacturer: Sodick Model: VZ500L Drives: Linear Working range (X x Y x Z): 500mm 350mm 250mm Maximum workpiece dimensions: 960mm 670mm 245mm Maximum workpiece weight: 850 kg Capabilities: Angular wire cutting (based on 3D models) Additional features: Automatic wire feeding (AWF) Hjdpfx Ajx Ekcysbdei Immersion in dielectric fluid

Condition: good (used), Travel on X axis (longitudinal) 400 mm Travel on Y axis (transverse) 250 mm Hjdpfx Asxbm Uzobdoi Travel on Z axis (vertical) 400 mm Max. workpiece length 850 mm Max. workpiece width 500 mm Max. workpiece height 400 mm Max. workpiece weight 1000 kg CNC type CHARMILLES Tank length 1200 mm Tank width 700 mm Tank height 400 mm Plant closure sale: various machines, accessories, cutting tools, tool holders, vices. Please call for contact; no replies to OLX messages. Prices are net and open to reasonable negotiation. 1. Bench drill press 2. Jungner surface grinder 3. SPC 20 surface grinder 4. Surface plate (layout table) 800x500 5. MAHO 800 6. 2D dividing head, diameter 300 mm 7. 3D dividing head, diameter 300 mm 8. Tesa 700 height gauge 9. Charmilles 200 die sinking EDM 10. Charmilles Drill 11 die sinking EDM 11. Metal bandsaw

Condition: used, Travel: 260x160x180mm Work-place: 600x900mm Complete with belongings - Documentation available: Yes - CE certificate present: No Hodpfex Igc Usx Abdji - Control: CNC Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2019, Wire EDM machine Manufacturer: Mitsubishi Electric Model: MV1200S NewGen Year of construction: 2019 Operating hours: approx. 9,500 Control: M800 D-CUBES Mitsubishi Electric control system Hybrid construction Travel paths X/Y/Z: 400 x 300 x 220 mm Travel paths U/V: 120 x 120 mm Max. workpiece dimensions: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS – Optical Drive System Tubular direct drives in XY axes Linear encoders in XY axes Intelligent AT – Automatic Wire Threading For wire diameter 0.10 – 0.3 mm Automatic fine hole searching function Hjdoxpfy Sjpfx Abdoi 5 controlled axes – prepared for additional axes PFC – Precise Finish Circuit LLS – Long Life System 10 kg wire station Wire alignment block Wire chopper Compressor cooler ä25226

Condition: excellent (used), Year of construction: 2006, Mitsubishi wire EDM machine FA20S, year of manufacture: 2006 With accessories Hodpfx Abowt N Uqodji More pictures and data will follow shortly.

Condition: new, The Neospark T 500 is an advanced Wire Cut EDM machine from the renowned brand KNUTH, known for its precision and efficiency in electrical discharge machining. This high-performance machine is ideal for companies specializing in mold and tool making, providing exceptional cutting capabilities for electrically conductive materials, especially when separating 3-D printed components from their base plates. The Neospark T features a rigid cast-iron frame with precision-machined surfaces, ensuring permanent mechanical precision through its advanced linear guides and preloaded ballscrews on all axes. Operating costs are notably low thanks to its cost-effective design, while the user-oriented IPC-based 4-axis control system enhances process reliability. Moreover, it includes a specialized aluminum cutting function that extends wire life and minimizes the risk of breakage during machining. With features like a central lubrication system, easy setup via handheld controls, and integrated CAD/CAM software, the Neospark T 500 is a robust choice for professionals seeking efficient and reliable Wire Cut EDM solutions. To explore this product further, request a quote today. Hjdpfxowt Du Sj Abdei

Year of construction: 1987, condition: ready for operation (used), A Mitsubishi wire EDM machine including an automatic wire changer (AWF system) is available. Travel X/Y: 381mm/749mm, table dimensions X/Y: 647mm/797mm, max. workpiece dimensions X/Y/Z: 647mm/749mm/259mm, max. workpiece weight: 950kg. Machine dimensions X/Y/Z: approx. 1850mm/2600mm/1950mm, weight: approx. 4100kg. Including 12 wire spools and one ceramic replacement plate. The wire changer is defective. Documentation available. An on-site inspection is possible. Hjdex Hz Shepfx Abdji

Year of construction: 1990, condition: ready for operation (used), With dielectric, fully automatic water treatment system with ion exchanger, filtration system, clamping system with generator and adaptive discharge unit for precise machining, cooling and hydraulics, external pump and filtration systems. Without documentation, maintained internally, pneumatic hoses have been renewed, the machine has not been in operation since 2022 but was last functional. A clamping system is optionally available. An on-site inspection is possible. Hjdpew S Tygjfx Abdji

Year of construction: 1995, condition: ready for operation (used), X-axis: 400mm, Y-axis: 250mm, Z-axis: 256mm, max. workpiece weight: 400kg, max. workpiece dimensions: 580/860/250mm, support surface: 680/500mm, min. start hole diameter: 2mm, cutting rate: 185mm²/min, generator: Agiplus-MMD, control: Agimatic CF20. With dielectric processing unit DA-15/C. The display power supply is defective. The machine has already been dismantled, an on-site inspection is possible. Hedpfx Abew Sxx Isdei

Year of construction: 2008, condition: refurbished (used), AGIECUT Challenge V3, Year of manufacture 2008 travels: X= 500 mm, Y= 350 mm, Z= 256 mm travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER- hand box for comfortable set-up Incl. AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled and extensively tested by us after receipt of order. Incl. user training at Techma on your overhauled machine Hsdpfx Abem Amf Dedoi Optional: transport, commissioning, training, cooler

Condition: good (used), Year of construction: 1998, Controller FANUC Series 16W Max size of wpc. 800 x 730 x 300 mm Max table load 750 kg X travel 520 mm Y travel 370 mm Z travel 300 mm U travel 120 mm V travel120 mm Dia of wire Ø 0,05 – 0,33 mm No. of axes 5 (X, Y, Z, U, V) Hsdpfxeul Uwle Abdji Capacity of tanks 650 Liters Accessories - Dielectric cooler - Coolant unit - Interface RS232 - MPG - Automatic wire threading - Manuals

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Table size 700 x 480 mm X travel 350 mm Y travel 250 mm Z travel 250 mm U/V travel +/-45 mm Max. taper cut +/-10 degree Hedpfei A I Hfex Abdji Max. size of workpieces 820 x 680 x 250 mm Max. weight of workpieces 400 kgs Wire speed 3 - 330 mm/sec Dimensions LxWxH = 2500 x 2500 x 2200 mm Weight ca. 2640 kgs Accessories - Coolant tank - Manuals Very little working hours. The machine is like new. There are two identical machines.

Condition: used, Year of construction: 1972, Technical details: wire diameter - max.: 12 mm wire diameter - min.: 2,0 mm control for program: Process Controler Total power requirement: 18,5 kW Weight approx.: 10,5 t dimension machine xH: 2,6 x 1,8 x 2,7 m dimensions LxWxH: Schmiermittelanlage: 0,6 x 0,4 x 0,8 m dimensions electric cabinet LxWxH: 0,5 x 1,2 x 2,1 m dimensions of coil: 2,6 x 1,8 x 2,7 m Hjdpfx Absu Ic Hnedei WRAIGHTING AND CUTTING MACHINE from the manufacturer Wafios-Hack Also called spring coiling machine, for the production of right and left hand tension / compression springs. Feed length 17400 mm Spring Ø 120 mm Output range: Yield 1 - 70 pieces/min. Spring Ø 25 - Ø 200 mm Wire thicknesses round steel Ø 5.0 - 140 mm and square steel 5.0 - 12.5 mm Feed speed - spring length max. 42,000 mm and wire feed F1= 40 m/min. + F2= 28 m/min. + F3=20 m/min. currently mounted on the machine: 6 feed rollers for wire intake Ø 4 mm to produce the end product: tension spring wire Ø 4 mm, outer Ø 34 mm and length at 135 mm Operation via control panel, Process Controler BRANKAMP Equipment: Lubricant system Wire reel reel Switch cabinet cooler reel Optional accessories and/or spare parts see photo i.D. *

Condition: used, Technical details: wire diameter - max.: 9,0 mm wire diameter - min.: 2,0 mm voltage: 380 V / 50 Hz V control voltage: 220 V Total power requirement: 18 kW Weight approx.: 5,0 t dimensions: Schmiermittelanlage: 830 x 650 x 1000 mm dimension machine xH: 3,3 x 1,5 x 1,45 m dimensions electric cabinet LxWxH: 0,7 x 1,5 x 1,75 m WIRING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right and left-hand tension and compression springs as well as torsion springs. The springs can be produced with any pitch and shape of spring body. Output max. 90 pieces/min. Outer spring Ø 10 - 120 mm Unlimited wire feed length, speed = 27 - 80 m/min. Coiling device: two-finger system wire thickness Ø 2.0 - 9.0 mm; spring outer Ø Ø 10 - 120 mm Single-finger system: wire thickness Ø 3.0 - 7.0 mm; spring outer Ø max. Ø 60 mm Equipment: 5x feed rollers, wire holder 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire roller holder POST, motor-driven, mandrel holder Ø 1,400 mm Lubrication system Hjdpfxevc Akle Abdoi Control cabinet cooler RITA Hydraulic unit Optional many accessories and/or spare parts! i.D. *

Condition: used, Year of construction: 2005, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, Travel X 350 mm / Y 250 mm / Z 220 mm Hodpfxsx Hghuo Abdei incl. chiller Automatic wire threading Water bath

Condition: used, Year of construction: 2015, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, Travel: X 600 / Y 400 / Z 310; Water bath machine; Automatic wire threading; Chiller. Hodpfsx Hgg Dox Abdsi

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06F2S765, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, The machine is currently serviced and in good condition. The wear parts have been extensively replaced. The EDM machine has barely been used in the last four years. Transport, installation and operator training can be organized at an additional cost. Hedpowtd Edofx Abdsi

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Challenge 2 eCut Hsdpjxyxfpefx Abdoi Year of manufacture: 2005 Travel ranges (X/Y/Z): 350 x 250 x 256 mm Travel ranges (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface finish: 0.2 µm Ra Available wire diameters: 0.10 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Includes console with USB port The machine will be cleaned, overhauled, and tested by us after receipt of the order. Commissioning and training can also be provided upon request.