Used Wire Forming for sale (8,890)

Condition: used, Year of construction: 1997, functionality: not functional, type of input current: three-phase, overall weight: 422 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 14 A, Equipment: cooling unit, documentation/manual, We offer this used AGIE AGIECUT 125 wire EDM machine, manufactured in 1997. Todpfjz Affnsx Al Ajc Type: AGIEPULS MMD Serial number: 491.010 Electrical diagram: 624262.2 Weight: 422 kg Voltage: 3 x 400 V Frequency: 50 / 60 Hz Rated current: 14.75 A The machine is currently disconnected. All electronic components, circuit boards, and the numerical control unit are intact. We suggest using it for spare parts recovery. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 5,075 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.0175 Condition: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Platform height: 8900 mm Picking height: 10500 mm Initial inspection: Yes Cabin width: 1200 mm Year: 2015 Hours: 5075 hours Capacity: 48 V / 620 Ah Todpjzv H N Uefx Al Asc Options: FULL options!! - Triplex mast - FFL - SAFETY doors with TILTING FUNCTION!! - Adjustable forks! - PSA (Sick) - Induction / Wire Guidance - End-of-travel sensors on the mast

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 960540, GIC 3100 bagging machine direct from closed salad factory. In nearly new condition but has had it's electronic components removed (we will replace these with new direct from GIC). Large choice of tooling available. Tjdjyx Na Ropfx Al Aoc

Condition: good (used), Year of construction: 2009, operating hours: 1,850 h, functionality: fully functional, overall weight: 4,000 kg, Equipment: documentation/manual, The machine was put into operation in Switzerland in 2010 and operated flawlessly until its last day. The machine comes from a prototype development department, which explains the low number of operating hours. Tedpjz Hzz Dofx Al Ajc

Condition: excellent (used), Year of construction: 2018, Profiling machine Todoztkw Dspfx Al Ajc

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 3,483 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.016 Category: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Tjdezv H Nzspfx Al Aec Capacity: 1200 kg Picking height: 10500 mm Initial inspection: Yes Cabin width: 1200 mm Year: 2015 Hours: 3483 hours Capacity: 48 V / 620 Ah - Year of manufacture 2021 Options: FULL options!! - Triplex mast - FFL - SAFETY doors with TILTING function!! - Adjustable forks! - PSA (Sick) - Induction / Wire Guidance - End-of-travel sensors on the mast

Condition: excellent (used), AGIE – CNC wire electrical discharge machining (EDM) machine – AGIEMATIC CF20 / AGIEPULS MMD / DA-15/TP For sale, a complete industrial CNC wire EDM machine from AGIE, manufactured in Switzerland. The machine is designed for the precise cutting of metal components using the wire EDM process. The offered set includes: - AGIE AGIEMATIC CF 20 – CNC control - AGIEPULS MMD – pulse generator for EDM - AGIE DA-15/TP – dielectric preparation and circulation unit - working fluid filtration system - cooling unit - pumps and auxiliary equipment - complete set of cabinets and accessories as shown in the pictures Device data from the nameplates: AGIEMATIC CF 20 - series: 465 - device: 004 - weight: 280 kg - power supply: 3 × 380 V - 50/60 Hz - power: 1.2 kVA AGIEPULS MMD - series: 436 - device: 001 - weight: 415 kg - power supply: 3 × 380 V - 50/60 Hz - power: 10 kVA DA-15/TP - series: 228 - device: 004 - weight: approx. 420 kg - power supply: 3 × 380 V - 50 Hz - power: 4.8–6.9 kVA Tsdsz Et Rujpfx Al Aec Manufacturer: AGIE, Switzerland. The machine is a complete set with the original AGIE control, generator, and dielectric system. Condition: used, condition as shown in the pictures. Inspection on-site is possible. Before purchasing, it is possible to verify the completeness of the equipment.

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15 Todpjxghngefx Al Aoc

Condition: good (used), functionality: fully functional, total height: 1,500 mm, total width: 1,700 mm, total length: 2,250 mm, type of input current: three-phase, overall weight: 500 kg, film width: 650 mm, compressed air connection: 6 bar, input voltage: 400 V, product height (max.): 199 mm, nominal power: 4.5 kW (6.12 HP), Side sealing machine – in very good condition, fully functional Tedey Ttrmepfx Al Aoc For sale is a high-quality side sealing machine in very good, well-maintained condition. The machine is fully functional and has been regularly serviced. The side sealing machine is ideal for the professional packaging of products with shrink film and ensures uniform, clean packaging results. Details: Very good, well-maintained condition Fully functional Uniform heat distribution Robust industrial design Ideal for production and packaging lines The machine can be inspected and tested on-site by arrangement. If you are interested or have any questions, please do not hesitate to contact us. Data sheet Box Motion Side Sealing Machine DEAPSS-5025BM Model DEAPSS-5025BM Applicable films (half-tube): POF / PP / PE Sealing mechanism 1: Longitudinal sealing (pneumatic) Sealing mechanism 2: Traveling transverse sealing (pneumatic) Sealing blade width (transverse): 500 mm Maximum product height: 199 mm Maximum format width (W + H): 450 mm* Maximum roll size (L x Ø): 650 x Ø 300 mm Machine size (L x W x H): 2250 x 1700 x 1500 mm Conveyor belt speed: 35 m / minute Maximum power consumption: 4.5 kW Connection voltage: 400 V / 3 phases Sealing cycles: up to 100 pieces / minute Air pressure (dry air): 6.0 bar Machine weight: approx. 450 kg

Year of construction: 1992, condition: used, machine/vehicle number: 1784, ITEK Graphix 985CF / Ryobi 3202MCS – 2-colour continuous forms offset press Year: 1992 Condition: used Price: €3,250 excluding VAT Delivery terms: EXW Son en Breugel, the Netherlands ITEK Graphix 985CF, the ITEK version of the Ryobi 3202MCS, 2-colour offset press for printing continuous stationery and fanfold forms. The machine is equipped with tractor feed and pack-to-pack delivery. The press comes from a small printing company which ceased its activities due to serious health problems of the owner. The machine was mainly used for single-colour printing. After arrival at our warehouse, the machine was thoroughly cleaned. The machine runs and turns mechanically, but it has not printed again after cleaning. Therefore, no recent print test is available. The electronic counter is currently not working because its internal battery is exhausted. The total impression count is therefore unknown. Technical specifications * Number of colours: 2 Tsdpfezqhgdjx Al Ajc * Application: continuous stationery / fanfold forms * Feeding system: tractor feed * Delivery: pack-to-pack * Paper width: approximately 127–356 mm / 5–14 inches * Form length: approximately 178–356 mm / 7–14 inches * Length adjustment: in increments of 1/6 inch * Maximum printing size: approximately 330 × 355.6 mm * Paper thickness: approximately 0.06–0.20 mm * Production speed: approximately 4,000–6,000 forms per hour * Dampening system: molleton * Electrical supply: 230 V, single phase, 50 Hz * Power consumption: approximately 550 W * Dimensions: approximately 1,500 × 900 × 1,410 mm * Weight: approximately 550 kg Included * Original Ryobi operating manual * Original Ryobi parts catalogue * Safety documentation * Various loose rollers * Additional trays, shafts, rods and tools * Other accessories shown in the photographs The machine is offered in its present condition and can be inspected by appointment in Son en Breugel, the Netherlands.

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 5,550 mm, construction height: 2,360 mm, operating hours: 2,442 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast: Z + i - 3F5550 ID: 25064.5758 Cat.: Used Todpezv Ru Usfx Al Aec Mast: 3F Lowered height: 2360 mm Lifting height: 5550 mm Capacity: 1000 kg Platform height: 4750 mm Picking height: 6350 mm Initial inspection: Yes Cabin width: 1500 mm Year: 2018 Hours: 2441 hours Capacity: 48 V / 465 Ah Options: FULL options!! - Triplex mast - FFL - DOUBLE steering!!!! - Adjustable forks! - 2 x Blue spot - PSA - Floodlights - Induction / Wire guidance

Condition: used, Year of construction: 1970, für MK3 Todjztfy Topfx Al Asc weight of the machine ca. 4 t

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 310 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, feed rate X-axis: 600 m/min, feed rate Y-axis: 1,000 m/min, table load: 1,000 kg, Equipment: compressor, fridge, FANUC Robocut α-C600iB Todpfezlc Tbex Al Aoc

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 500 kg, The machine was purchased during the liquidation of a company. Flowpack machine ITALDIBIPACK Dibiflow 500 – Year of manufacture 2021 – Very good condition For sale is a high-quality flowpack packaging machine from the manufacturer ITALDIBIPACK, model Dibiflow 500, year of manufacture 2021. The machine is in very good, well-maintained condition and is ideal for the efficient packaging of a wide variety of products in tubular bags. Technical data Manufacturer: ITALDIBIPACK S.p.A. Model: Dibiflow 500 Year of manufacture: 2021 Connection: 400V – 3Ph + T + N – 50/60 Hz Power: 4.3 kW Weight: approx. 500 kg Equipment & Features Todpjxw S Ixofx Al Aec Robust construction High-quality sensors for product and film detection Adjustable guide rails for different product widths Clean, modern control and drive technology Ideal for food, non-food, industrial products and more CE marking Perfectly suited for continuous packaging processes Condition The machine is ready for immediate use and shows only minor signs of wear. The guide systems, rollers, sensors and the entire mechanics are in very good condition (see pictures). Price Negotiable – €13,000 + €4,000 printer

Condition: used, Year of construction: 1970, für MK3 weight of the machine ca. 4 t Todpfx Aleztfzdo Aec

Condition: good (used), Very high spec bagging machine. Large choice of forming sets including block bottom. Todpfx Aloywpblo Aec

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Maximum workpiece dimensions: 1,550 x 1,200 x 595 mm Maximum workpiece weight: 4,000 kg X and Y axis travels: 1,200 x 800 mm U and V axis travels: 260 x 260 mm Z axis travel: 600 mm Permissible wire diameter: 0.2 – 0.30 mm Simultaneously controlled axes: 4 (X, Y, U, V) Motors: AC on all 5 axes Maximum taper: 30° over 100 mm Machine weight: 9,600 kg FILTRATION UNIT Tsdpfsxwmacox Al Ajc Tank capacity: 3,000 liters Conductivity control system: Automatic Resin capacity: 14 liters Temperature control: Automatic Dielectric cooling system: Chiller GENERATOR Power circuits: AC MOSFET Minimum surface roughness: Ra 0.35 µm Cutting speed: 360 mm²/min (brass wire Ø 0.30 mm) Automatic wire threading: Standard Power supply: 400V, three-phase CNC CONTROL Hardware: 64-bit industrial PC Memory: 1 GB Screen: 15” TFT touchscreen Data input: Keyboard, RS232, floppy disk, LAN, USB Positioning system: Closed-loop servo-controlled Number of controlled axes: 5 (X, Y, U, V, Z) Minimum programmable increment: 0.0001 mm MACHINE EQUIPPED WITH: Optical scales on X and Y axes 600 mm Z axis Wire spool holder for coils up to 50 kg No. 1 set of 0.25 mm guides No. 1 set of 0.30 mm guides Taper cutting system Automatic wire threading and re-threading after breakage Clamping system: frame with universal drilling pattern 64-bit CNC control with 16 GB memory AC power generator with anti-electrolysis device Automatic technology generation Serial interface, floppy drive, LAN, USB Dielectric unit with automatic demineralization system Chiller Year of manufacture: 2018

Condition: used, Year of construction: 1998, Control FANUC Series 16-W x-axis 320 mm y-axis 220 mm z-axis 180 mm u-axis 120 mm v-axis 120 mm rapid traverse (x) 900 mm/min rapid traverse (y) 900 mm/min rapid traverse (z) 450 mm/min rapid traverse (u) 450 mm/min rapid traverse (v) 450 mm/min max. workpiece weight 250 kg weight of the machine ca. 1,5 t connected load 11 kVA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Todpjzrh N Uofx Al Aec Subject to change, errors in technical data and specifications, and prior sale.

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 5,550 mm, construction height: 2,360 mm, operating hours: 2,482 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast: Z + i - 3F5550 ID: 25064.5759 Category: Used Mast: 3F Lowered height: 2360 mm Lifting height: 5550 mm Capacity: 1000 kg Platform height: 4750 mm Tedezv H Tyjpfx Al Ajc Picking height: 6350 mm Initial inspection: Yes Cabin width: 1500 mm Year: 2018 Hours: 2482 hours Capacity: 48 V / 465 Ah Options: FULL options!! - Triplex mast - FFL - DUAL steering!!!! - Adjustable forks! - 2 x Blue spot lights - PSA (Pedestrian Sensing Alarm) - Floodlights - Induction / Wire Guidance

Condition: used, Year of construction: 2015, Travel range: X 600 mm Y 400 mm Z 400 mm Including coolant system Water bath machine Tjdsz D Egrepfx Al Ajc

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 10,500 mm, construction height: 4,730 mm, operating hours: 1,629 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 308 Tsdpfxjzut Uho Al Aoc Mast: L + i - 3F10500 ID: 23123.5000 Category: Used Mast: 3F Lowered height: 4730 mm Lifting height: 10500 mm Capacity: 1000 kg Platform height: 10500 mm Picking height: 12100 mm Cabin width: 1500 mm Year: 2018 Hours: 1629 hours Capacity: Complete NEW 48 V / 620 Ah - Year of manufacture: 2026 Options: - Mast Triplex - FFL - PSA (Sick) - Induction / Wire Guidance – complete, LIKE NEW!!

Condition: used, Year of construction: 2011, Wire erosion / EDM Tsdpfx Asz Aq Dvsl Aec Travel distance X: 700 mm Travel distance Y :450 mm Travel distance Z: 420 mm max. workpiece size X: 910 mm max. workpiece size Y: 660 mm max. workpiece size Z: 400 mm max. workpiece weight: 1200 kg table size X: 650 mm table size Y: 400 mm with AWF ( Automatic Wire Feeding ) U / V axis: +101 generator: 30 Ampere submerged cooling unit CNC wire EDM machine 5 CNC axes: X / Y / Z / U / V Automatic wire threading Dual Water Jet with Annealer Automatic wire break recovery 15" TFT touchscreen Linear glass scales in X / Y Dielectric chiller Automatic temperature control Max. table load: 1,200 kg Max. machining current: 30 A Programmable wire tension: 2–30 N Standard wire spool: 16 kg Machine weight: approx. 6,000 kg

Condition: used, functionality: fully functional, Year of construction: 2021, !! Short delivery time, we are happy to advise you !! A simple flow pack machine suitable for packaging various products. Tedpfxsu T N Umj Al Asc You have the option to inspect it locally before making a purchase decision. 3 units available Used. Thermal transfer printer available as an option: €1,900

Condition: used, Year of construction: 1986, Format: 520 mm Tsdpfx Alezywcge Aoc Equipment: Exchangeable casettes format change system Perforation unit for Business forms Remaliner finishing options: Roll to Fold, Roll 3 Offset units 3 x 22 Zoll printing unit inserts

Condition: good (used), DREISTERN P3.100 Profiling Line – 16 driven stations and 2 × 18.5 kW Short title for platforms with character limits: DREISTERN P3.100 Profiling Line, 16 driven stations Platform data * Machine type: Profiling line / Roll forming line * Manufacturer: DREISTERN * Model: P3.100 * Year of manufacture: not known / to be added before publication * Condition: used, dismantled * Control system: not available For sale is a DREISTERN profiling line, type P3.100, with 18 stations, 16 of which are driven. The line is equipped with 16 profiling stands, 50 mm working shafts, quick-change plates, and two Bosch motors, each with 18.5 kW. The modular design with mechanical quick clamps and quick-change plates is suitable as a solid mechanical base for customer-specific roll forming applications. A constructive expansion with additional stations is possible. According to the previous operator, the line operated flawlessly until it was dismantled at the customer's site. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine bed and drive * Production direction: from left to right * Axle distance: 330 mm * 18 stations in total * 16 stations driven, with 16 gearboxes * Quick-change plates * Mechanical quick clamps * Coolant piping * 2 × Bosch motor, each 18.5 kW Profiling stands * Number in scope of supply: 16 pieces * Tool width per stand: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with groove * Fixed lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes * Worm gear ratio: 1:7.5 * Lower/upper shaft ratio: 1:1 Scope of supply * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit * Special straightening device * 16 gearboxes Tjdpfx Alezzyd Ne Aoc * 16 profiling stands * 2 Bosch motors, each 18.5 kW * 32 universal joints