Used Wmw for sale (462)

Condition: used, Technical details: Hjdpfju Nkpyox Ahast floor-plate length: 660 mm floor plate width: 450 mm floor plate height: 70 mm passage opening in table: Ø 115 mm weight of the machine approx.: 111 kg space requirements of the machine approx.: 660x450x70 mm fall trough hole 115mm T-slots : according to DIN 650 and 508 a=22mm b=38mm h=40mm c=17mm *

Condition: used, Technical details: diameter of piston: Ø 160 mm weight: 200 kg dimensions: 0,6 x Ø 0,3 m draw cushion for a WMW Erfurt Press type PYE 160 blankholder force 50Mp ejector force 4 Mp stroke up to 160mm flange diameter 280mm piston diameter 160mm piston central drill hole M 16, fixing holes M 24, diameter 118mm hydraulic connection 2x 1 inch Hsdpfx Ahou Nurfsast *

Condition: excellent (used), Year of construction: 1989, Type: EDU / 80 DR EK ICH FQW / FQS Q ApW/Q ApSS Number: 1824/1989 Mounting: SK 50 Hodjh Ar Tyspfx Ahajt Contact surface, W x H: 480 x 460 mm Hole spacing, W x H: 425 x 415 mm Gear diameter, internal / external: 75 / 100 mm Speed range: 18 to 2,800 rpm Condition: very good Weight: 280 kg Dimensions: 560 x 410 x 1,000 mm

Condition: used, Year of construction: 2019, Two Heckert H55 4-axis machining centers for sale. Travel distances: x: 700 mm, y: 750 mm, z: 780 mm. Machine dimensions: length: 7060 mm, width: 3030 mm, height: 3835 mm, weight: 10,900 kg. Hedpfx Asw D Hhcohaet

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 630 mm, LATHE TECHNICAL SPECIFICATION – PERFORMANCE OVERVIEW Workpiece Capacity Turning diameter over bed (nominal / max): 630 mm / 660 mm Turning diameter over carriage: - Short slides: 400 mm - Long slides: 320 mm Max. swing in front of faceplate notch: 720 mm Notch length: 265 mm Over bed: 305 mm Over floor: 1125 mm Machine Construction & Spindle System Bed width: 550 mm Spindle bore: 72 mm Faceplate: - Diameter: 630 mm - Width: 120 mm Tooling & Setup Tool cross-section (cutter): 40 × 40 mm Tool holder side length: 200 mm Spindle & Drive Performance Main motor speed: 1400 rpm Spindle speed steps: 18 Hedpfxsx Acpde Ahajt Max. permitted faceplate speed: 560 rpm Feed Ranges Longitudinal feeds: - Steps: 68 - Range: 0.035–10 mm/rev Cross feeds: - Steps: 68 - Range: 0.014–4 mm/rev Rapid Traverse Rates Longitudinal: 5000 mm/min Cross travel: 2000 mm/min Thread Cutting Capability Metric threads: - 84 types, 0.2–224 mm Inch threads: - 94 types, 140–1/8 TPI Module threads: - 72 types, 0.1–112 Pitch range: - 94 types, 280–1/4 Machine Dimensions Overall length: 2300 mm + distance between centers Width: 1850 mm Height: 1725 mm Ask for a testing video! Robust and precise heavy-duty lathe featuring wide turning capacity, extensive thread cutting options, and high feed/rapid traverse performance. Ideal for demanding workshops requiring versatility, power, and reliability.

Condition: used, Year of construction: 2015, Technical details: weight of the machine ca.: 4 t Hodpjl Ha Ubsfx Ahast

Condition: excellent (used), Year of construction: 1984, power: 17 kW (23.11 HP), type of input current: three-phase, pressing force: 160 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 125 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 700 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 22,000 mm, total width: 12,500 mm, total height: 34,500 mm, overall weight: 7,000 kg, operating pressure: 160 bar, installation height: 800 mm, pressure: 250 bar, Hydraulic press PYE 160 S/1M. Year of manufacture: 1984. Manufacturer: VEB Wema Zeulenroda (Germany). The machine has undergone a general overhaul. Specifications: Maximum pressing force: 160 tons. Operating pressure: 16 MPa. Upper table: 700 x 450 mm. Lower table: 900 x 630 mm. Daylight opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 200 mm/sec. Upward speed: 125 mm/sec. Power requirement: 17 kW. Oil tank capacity: 500 l. Weight: 7000 kg. Height: 3450 mm, Length: 2200 mm, Width: 1250 mm. Machine in very good condition. Inspection and test under power possible. Hedpfx Ahoqy E I Rjaot

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, power: 8.75 kW (11.90 HP), pressing force: 25 t, stroke length: 500 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 360 mm, clearance between the columns: 800 mm, total length: 16,500 mm, total width: 10,500 mm, total height: 27,500 mm, overall weight: 2,200 kg, die cushion stroke: 160 mm, Hydraulic press PYE 25 S1M with ejector. Year of manufacture: 1987. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: Maximum pressing force: 25 tons. Working pressure: 16 MPa. Upper table: 450 x 360 mm. Lower table: 630 x 500 mm. Clearance: 800 mm. Cylinder stroke: 500 mm. Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Lower ejector force: 10 tons. Lower ejector stroke: 160 mm. Power requirement: 8.75 kW. Weight: 2200 kg. Height: 2750 mm, Length: 1650 mm, Width: 1050 mm. Hsdpfxjtzwxdo Ahaet Very good technical condition. The machine has undergone a complete overhaul. Machine can be inspected and tested under power.

Condition: used, Technical details: Pressure: 2,3 t stroke: 280 mm throat: 155 mm max. ram stroke: Vorlauf: 0,08 m/sec daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: max. 355 mm clamping plate on table: 280 x 280 mm passage opening in table: Ø 100 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 725 mm total power requirement: 1,1 kW weight of the machine ca.: 0,5 kg dimension machine xH: 0,6 x 0,7 x 1,6 m Press with mechanical 2-hand operation. Pressure test up to 2,3to performed. Good condition. Hedpfx Asu Nfwljhast *

Condition: used, Year of construction: 1991, Technical details: Pressure: 160 t stroke: 500 mm throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250 x 630 x 100 mm passage opening in table: 4x D=62 mm ram speed - forward: 200 m/s ram speed - reverse: 125 m/s ram surface area: 450 x 850 mm mortise hole in ram: 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter * Hjdew D Awmspfx Ahaot

Condition: used, Technical details: pressure: 40 t Hjdpfx Asw Smukehast distance between columns: - mm stroke: 500 mm throat: 360 mm distance table/ram: max. 800 mm daylight dimension : table/slide up: 600 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,450 m/s Table dimensions: 750 x 500 mm passage inside table: 200 mm surface area of ram: 360 x 450 x 72 mm mortise hole in ram: 40 x 75 mm height over floor: 700 mm total power requirement: 13 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,75 x 1,15 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: excellent (used), functionality: fully functional, Facing & Centering Machine Model: FZWD 160 Year: 1978 Location: Rostock Country: Germany Manufacturer: WMW Saalfeld Control system: Conventional Machine weight: 4 t Total power requirement: 19 kW Dimensions (L x W x H): 3.1 x 2.59 x 1.7 m Workpiece diameter: 20 - 160 mm Workpiece length: 140 - 1,000 mm Workpiece weight: 125 kg Cutter mounting: SK 50 Rapid traverse: 6,000 mm/min Spindle speeds (cutter head): 56 ... 280 rpm Feed rates, stepless: 15 ... 800 mm/min Max. milling slide stroke: 230 mm Max. cutting depth: 6 mm For center drills: 4 ... 20 mm Feed rates, stepless: 15 ... 375 mm/min Hedpfx Ahoytitreast Max. feed travel: 60 mm

Condition: good (used), Year of construction: 2010, Machine is in good condition. Parts shown by hand not come. Hodpfex N Atfsx Ahajt

Condition: used, rated capacity 23 kW Hedpfxsucgnie Ahaot rated current 43 A voltage 400 V For sale is an electrical control cabinet, which originally belonged to the a single-column eccentric press, make Erfurt, type PEE III/160

Condition: good (used), functionality: fully functional, Honing machine SZS 200X500D Hjdpfx Aoy D A Niohast

Year of construction: 1966, condition: good (used), Machine number: 6665/66 Type / Model: PEDV 10/II-S Pressing force: 10 t Table: 450 x 300 mm Hodpfxsh Tktie Ahast Ram: 190 x 140 mm Ram stroke: 6 to 50 mm Downward ram adjustment: 45 mm Upward table adjustment: 140 mm Die opening: 140 mm Overhang: 170 mm Maximum distance between table and ram: 320 mm Stroke rate: 160 /min Sheet metal thickness per stroke: 2 mm Sheet metal thickness for continuous stroke: 1 mm Connection: 1.2 kW Accessories/Equipment: Condition: good Weight: 1.0 t Dimensions: 900 x 850 x 2,200 mm

Condition: used, Technical details: width: 300 mm depth: 150 mm height: 340 mm Hedpeu N Ecnofx Ahajt weight of the machine ca.: 31 kg

Condition: used, Technical details: diameter: 600 mm passage: 250 mm width: 100 mm revolution per minute: 500 U/min Hodpsu N Ez Dofx Ahaot weight of the machine approx.: 175 kg 3-jaw chuck with internal jaws flange Ø 730 x 10mm (pitch circle bore Ø 680mm) 1 set of external jaws 1x chuck key *

Condition: used, Technical details: faceplate diameter: 900 mm width: 120 mm Hodpfx Aou N E A Uohast max. passage: Ø 140 mm weight: 330 kg Equipment: -4x clamping claws Flange mounting: -Ø inside: 410mm continuous x depth: 50mm -12x clamping holes Ø 26mm, pitch circle Ø 460mm *

Condition: used, Technical details: faceplate diameter: 1000 mm width: 150 mm boring diameter: Ø 130 mm max. passage: Ø 130 mm weight: 475 kg dimensions: Ø 1000 x 255 mm Equipment: -4x external/internal jaws; clamping travel approx. 200mm; clamping range max; approx. Ø 900mm / min. approx. Ø 100mm. Hedpeu N E E Nsfx Ahast -clamping flutes size according to DIN 650: a=22mm; h=43mm; b=40mm; c=16mm x length= 285mm Flange mounting: Ø inside: 195mm, depth 21mm 4x clamping bore pitch circle Ø 235mm *

Condition: used, Technical details: x-travel: 500 mm y-travel: 380 mm z-travel: 330 mm control: Siemens 840 D / 810 D spindle cone ISO: vertikal/horizontal: 40 table surface area: 400x800 fest mm spindle turning speed - continuous: verikal/horizontal: 35-1800 U/min spindle head swivable left - right: 90 ° rapid traverse X,Y: 3,15 mm/min. rapid traverse Z-axis: 1,6 m/min feed continuous: X/Y/Z: 6,3 - 1250 Total power requirement: 7,4 kW Weight approx.: 1,8 t dimension machine xH: 1,8 x 2,2 x 1,8 m dimensions electric cabinet LxWxH: 0,5 x 0,85 x 2,1 m Machine was rebuilt in 2002, modernized with a modern control Siemens 840D/810D shopmill. - adjustment travel via counter holder slide: 440mm Equipment: Hodpfeu Nc R Nex Ahaot - cooling system - control panel with jib arm Accessories: - various collet sleeves - div. SK 40 tapers - various milling arbors i.D. *

Condition: used, Technical details: floor-plate length: 1100 mm plate width: 800 mm plate height: 100 mm number of T-slots: 3 Stück distance between Columns: 300 mm weight of the machine approx.: 650 kg Hjdpfou Nkluex Ahajt T-Slots according to DIN 650 und 508 - width a:30mm - width b:50mm - height c:30mm - height h:50mm *

Condition: used, Technical details: table diameter: 300 mm table height: 250 mm rotation movement: 360 Grad passage: 40 mm swivellable: einseitig 90° ° weight of the machine approx.: 126 kg dimensions LxWxH: 0,65 x 0,52 x 0,25 m basis stand area:380x330mm T-slots: according to DIN 650 und 508 T-slots 4x163mm length and 4x 135mm length - a=12mm - h=19mm - b=21mm Hjdsu Nknpepfx Ahaet - c=9mm *

Condition: used, Technical details: length: 640 mm Hedpsu Nkrnjfx Ahaet width: 465 mm thickness of clamping plate: 90 mm weight of the machine approx.: 70 kg

Condition: used, Technical details: faceplate diameter: 350 mm width: 80 mm boring diameter: 50 mm weight of the machine ca.: 32,0 kg dimensions: 350x125 mm face slide with 4 internal/outer clamping chucks (clamping travel 80mm) clamping area internal: dia 110-350mm and external dia. 40 -300mm flange intake dia. 130mm Hodpfeu Nk T Sox Ahaot *