Used Wemas for sale (12)

Condition: good (used), Year of construction: 1997, Ready for demonstration under power. Nedpsy Thlbefx Ahzsct ++++ SPECIAL PRICE €5,900 ++++ Wemas VZ 1000, Year of manufacture 1997, Heidenhain TNC 407 control, Travel X/Y/Z 1016/610/660 mm, 4th axis, 20-position tool changer, SK 40 tool holder, Spindle speed up to 6,000 rpm, Table size 1300 x 600 mm, Coolant system, High-pressure coolant (IKZ) defective, Operating hours 43,000.

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 300 mm, travel distance Z-axis: 754 mm, controller manufacturer: HEIDENHAIN, number of axes: 3, This 3-axis WEMAS DZ 270 was manufactured in 2002. It features a turning diameter of 300 mm and a turning length of 754 mm. The machine is equipped with a HEIDENHAIN control unit and a 12-station disc turret from DUPLOMATIC, allowing for efficient tool management. If you are looking to get high-quality turning capabilities, consider the WEMAS DZ 270 horizontal turning machine we have for sale. Contact us for further details. • Turning diameter: 300 mm • Turning length: 754 mm • Turret brand: DUPLOMATIC (Italy) • Turret positions: 12-station disc turret • Driven tools: Yes (axial and radial tool holders visible) • Main voltage: 3x 400 V ~ • Frequency: 50 Hz • Total power requirement: 19 kVA • Nominal current: 50 A • Control voltage: 230 V ~ / 24 V = • Lighting: 230 V / 40 W Additional equipment • Chip conveyor: Integrated inclined belt type • Tooling included: Assorted Garant tool holders, VDI holders, ER collet chucks Technical Specification Counter Spindle No Njdsy Nc E Ijpfx Ahzect Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2006, operating hours: 11,849 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis WEMAS VZ 750 was manufactured in 2006. It features a HEIDENHAIN control unit with an iTNC 530 style interface, a T-slotted work table equipped with dual manual/hydraulic vises, and a mechanical spindle interface with coolant nozzles. If you are looking to get high-quality vertical machining capabilities, consider the WEMAS VZ 750 vertical machining centre we have for sale. Contact us for further details. • Axis movement: X/Y/Z, vertical orientation • Spindle/tool clamping: Mechanical clamping with coolant nozzles at spindle Njdjy Ncgxepfx Ahzoct • Work table: T-slotted table • Electrical cabinet: HEIDENHAIN drive system; Siemens/Phoenix Contact modules; EPCOS filter • Machine features: Full enclosure; integrated work light; air and coolant lines Additional equipment • Workholding: Dual vises (manual/hydraulic) • Tooling: Assorted BT/SK tool holders on external rack • Extraction: External extraction ducting

Condition: ready for operation (used), Year of construction: 2001, operating hours: 13,677 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis WEMAS VZ 750 CENTURY was manufactured in 2001. It features an X-axis travel of 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a Heidenhain TNC 426 control unit, an electronic handwheel, and a tool changer. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 750 CENTURY vertical machining centre we have for sale. Contact us for further details. • Machine ON time: 41,712 hours Ncjdpfsy Ifp Hox Ahzjt • Measuring system: Linear position measuring system in all three axes • Handwheel: Heidenhain HR 410 electronic handwheel • Tool changer: Included • Machine access: Side doors with windows (left and right) Additional equipment • Tool probe: m&h Inprocess 3D tool sensor (Type m&h TS35.10) • Workpiece probe: m&h Infrared workpiece touch probe (Type 25.00 SK40-02) • 4th axis: Walter CDS 22 motorized rotary table/indexing head with original control unit • Rotary table features: 3-jaw chuck, RS232 interface, digital angle input • Additional 4th axis: Walter CDS 22 rotary table/indexing unit Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2001, functionality: fully functional, Wemas VZ 750, Year of manufacture: 2001, Control system: Heidenhain TNC 426, Travel range X/Y/Z: 750/500/500 mm, Tool holder: SK 40, Njdpfx Asy Ni H Sjhzjct Tool changer: 20-position, 4th axis: Walter rotary table, Electric handwheel, 3D measuring probe.

Condition: excellent (used), For sale: robust WEMAS column milling machine, model FM23. Heavy cast iron construction, very rigid—ideal for toolrooms and maintenance workshops. The machine is equipped with a 3-axis DRO D60-3V digital readout and Rascher Nürnberg–München measuring scales. Table with longitudinal T-slots, coolant system with separate reservoir and pump. Vertical spindle with a precision holder and feed adjustment. Power supply: 3×400 V. The machine is complete, recently serviced, runs smoothly, and is ready for power-on testing. Normal signs of use visible—no excessive play. Included in the price: 3-axis DRO display, scales on X/Y/Z axes, coolant tank and pump, cables, power feed roller, and work light. Additional information from photos: 'WEMAS' and 'FM23' nameplates, spindle adjustment calibration plate, DRO panel with mm/inch, ABS/INC, and calculator functions. Working parameters, spindle taper, and speed ranges to be confirmed onsite—I can measure the table and X/Y/Z travels upon request. Loading by forklift possible. Assistance with transport organization available. Ncsdpfjw I Hzpex Ahzst

Condition: used, Year of construction: 2018, x-travel 620 mm y-travel 520 mm z-travel 460 mm c-axis 360 ° b-axis -50 / +110 ° distance spindle nose and table 170 - 630 mm CNC-control iTNC 640 HEIDENHAIN Table dimensions Ø 650 mm max. table load 500 kg Ncodpfx Ahexap Eaozet spindle turning speed range 12.000 U/min drive capacity - spindle motor 15,5 / 33,0 kW rapid traverse 48 m/min tool change unit 48 Pos. SK 40 coolant IKZ 30 bar voltage 400 V total power requirement 35 kW weight of the machine ca. 10,0 t dimensions of the machine ca. 4,00 x 2,46 x 2,85 m chip conveyor 2,90 x 0,50 x 1,30 m coolant tank 2,30 x 1,70 x 0,45 m coolant pump 0,60 x 0,50 x 0,90 m Oil cooler 0,55 x 0,60 x 1,10 m 5-axis simultaneous machining center - Serial-No.: 9496-117 - Control ON: 10,137 h - Spindle ON: 3,380 h - Control: HEIDENHAIN iTNC 640 - electr. handwheel - IKZ 30 bar - chip conveyor

Condition: excellent (used), Year of construction: 2019, Control Heidenhain TNC 620 Travel X/Y/Z 700/500/500 mm Speed 12.000 1/min IKZ 30 bar Belt filter system Measuring probe Tool magazine for 30 tools SK 40 Chip conveyor Njdeunnafopfx Ahzsct

Condition: used, x-travel 600 mm y-travel 400 mm z-travel 320 mm table-size 900 x 420 mm control konventionell tool adaptor SK40 turning speed range 35,5 - 1800 U/min quill stroke ja mm total power requirement 5,0 kW weight of the machine ca. 1,45 t Njdpoxwzcxjfx Ahzoct dimensions 1,6 x 1,2 x 1,9 m Features: - Digital display - Coolant system - Milling head with quill

Condition: used, Universal Tool Milling Machine WEMAS - MAKOSON Type WM 2 Year of manufacture: 1992 Travel ranges X: 480 mm, Y: 350 mm, Z: 250 mm Table size: 800 x 400 mm Spindle taper: ISO 40 Quill vertical travel: 80 mm Spindle speed: 35 to 4000 rpm, 3 steps Feed X, Y, and Z: 1 to 850 mm/min, stepless Rapid traverse X, Y, and Z: 1 m/min Spindle drive: approx. 3 kW ?? Electrical connection: 400 Volt, 50 Hz - Swiveling control panel with HEIDENHAIN digital readout, type Positip 850 - Spindle speed via 3 gearbox stages and stepless adjustment via frequency converter - Conventional handwheels for X, Y, Z - Vertical milling head with drilling quill swiveling +/- 90° - Manual tool clamping with M16 thread - Manual central lubrication - Coolant system integrated in machine base - Control cabinet fixed to the machine - Fixed angle table Ncedpsx Hkd Tjfx Ahzst Space requirement L x W x H: 1900 x 1700 x 1820 mm Weight: approx. 2000 kg In good condition

Condition: ready for operation (used), operating hours: 8,722 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, table load: 400 kg, spindle speed (max.): 8,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel (X-axis): 750 mm Travel (Y-axis): 500 mm Travel (Z-axis): 500 mm Table dimensions: 1,000 × 500 mm Number of T-slots: 3 Maximum table load: 400 kg Drilling performance Maximum drilling diameter (steel with tensile strength 600 MPa): 25 mm Ncodoygl Tuopfx Ahzot Drilling diameter with removable inserts from SK: 30 mm Thread cutting diameter: M20 Spindle Taper spindle bore: 40 (7:24) Tool shank: DIN 69871 Spindle diameter for bearings: 70 mm Distance spindle – table surface: 150–650 mm Spindle speed: 20–8,000 rpm Positioning accuracy Static deviation of the plane: 0.02 mm Repeatability: 0.008 mm Rapid traverse: 25,000 mm/min Feed rate: 5,000 mm/min MACHINE DETAILS CNC control manufacturer: Heidenhain Coolant system Nominal flow rate hydraulic generator for tool cooling: 32 l/min Nominal flow rate hydraulic generator for internal cooling: 60 l/min Maximum tank volume: 280 l Pneumatics Operating pressure: 0.6 MPa Operating hours Control powered hours: 30,743 h Machine powered hours: 25,946 h Program runtime: 8,722 h EQUIPMENT NC machine vice Various toolholders Drill chuck Face milling heads 4-fold clamping fixture suitable for vice 3D probe

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 650 mm, controller model: HEIDENHAIN 530, table width: 710 mm, table length: 1,400 mm, overall weight: 12,000 kg, WEMAS VZ 1200 Due to company restructuring, we have for sale: HIGH-SPEED 3-AXIS MACHINING CENTER Manufacturer: WEMAS Model: VZ 1200 Control: HEIDENHAIN 530 Ncjdpfx Ahjx Emm Uozot Year of manufacture: 2008 Table size: 1400x710 mm Travel: X 1200, Y 750, Z 650 mm Max. workpiece weight: 1800 kg Spindle: HSK 63A 16,000 rpm Power S1/S2: 15kW/19kW Tool changer: 30 positions Workpiece probe: HEIDENHAIN Tool probe: HEIDENHAIN Chip conveyor Internal coolant supply (IKZ) The machine is in very good condition, serviced, and in continuous use.