Eccentric press

WMW PEDV10/II-S

Condition: used, Round-tub vibratory finishing machine WALTHER TROWAL Type CLS-230 Order No. 05.833/00 Year of construction 1969 Tub diameter 1100 mm Total tub height approx. 650 mm Working container / Gross volume max. 230 liters Usable volume approx. 115 liters Speed 1100 to 1800 rpm, stepless Motor power 7.5 kW Power connection 400 Volt, 50 Hz - Operating cycle manual and via timer - Stepless motor speed adjustment via variator gearbox Nljdpfx Aofqpxioh Uok - Manually adjustable eccentric imbalance weights - Container with polyurethane lining – lining partially damaged or worn - Sound-insulated lid - Manual separation flap - Built-in screening device after the separation flap - Liquid connection - Material discharge opening 180 x 150 mm - Control cabinet for wall mounting - Baffle lid with perforated screen Space requirement with base L x W x H 1800 x 1750 x 1700 mm Net weight approx. 1800 kg In good condition Function description: Workpieces and abrasive media are set in motion by the generated vibration and are recirculated extremely gently. The constant relative movement between workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm Nsdpfx Ahjfx Hv He Uelk no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: used, Year of construction: 2001, Technical details: tube diameter: 74 mm wall strength: 5 mm tube diameter min.: 10 mm tube diameter max.: 74 mm round material: Stahl max: 40 mm control: Trumpf-Rohrtechnik IsoBend 2.0 bending radius max.: max: 300 / min: 65 mm bending angle max.: max: 195 / min: 0,1 ° bending speed: (°/s): 90 / (°/s²): 190 °/s Nlsdpfeu Ibvhex Ah Uek tube pipe draw up length: 3000 mm work pressure of hydraulic: Betriebsdruck max: 300 bar total power requirement: 43 kVA weight of the machine ca.: 8,5 t dimension machine xH: 6,5 x 1,6 x 1,6 m dimension control panel: 0,8 x 0,6 x 1,4 m It is a multi radius bending machine with bending head and swivel arm. (Cold bending machine) Possible applications: only for processing pipes, round steels and wires made of steel, stainless steel and non-ferrous metals. Due to the cross slide of the bending head, the following advantages can be listed: -free programmable X and Y axes -level change cross slide: tical travel = 300mm (vert. position freely programmable) and max. horizontal movement 350mm -Bending forms of different sizes within a stack of bending forms can be approached as required. The bending direction is to the right. Control software Trumpf-Rohrtechnik IsoBend 2.0 Hydraulic unit with high-pressure multi-flow pump Mandrel retraction unit Slide rail (speed max. 362mm/sec. and acceleration max. 1100 mm/sec.) i.D. *

Condition: good (used), Manufacturer: WEINGARTEN Type: ER 125 Nlsdpfx Ahsn D Ebao Ujk Table size: 800x620 mm A small crack is visible on the load-bearing part of the press; it has been used this way for years. !!

Condition: used, Year of construction: 1999, x-axis 6450 mm y-axis 400 mm z-axis 380 mm working lenght 6500 mm Number of tools 8 St. tool taper BT30 tool changing time 1,2 sec diameter of tools max. 80 mm turning speeds 6000 U/min Feed speed X = 34 m/min. Feed speed Y+Z = 18 m/min. total power requirement 8,5 kW dimensions 9800 x 3000 x 2400/3300 mm Nlodpfx Ahjt H Sn Ro Ujk weight 5400 kg *Bar machining center, 3-axis machining of aluminum, plastic, steel and stainless steel profiles*

Condition: good (used), Year of construction: 2002, machine/vehicle number: 022885001, Offer 24342 Technical data: - Fully automatic machine with hydropneumatic feed and MPS control system - with pre-programmable work cycles with infinitely variable speed regulation - Particularly suitable for stainless steel cuts - Workpiece clamping in pneumatic machine vice - Saw blade diameter 370 mm - Cutting speeds infinitely variable 15 - 70 1/min - Miter adjustable Right up to 45°, left up to 45 - 60° - Cutting range at 90° around 130 mm - Rectangle 180 x 100 mm - Square 120 x 110 mm - mitred at 45° around 130 mm Nljdpot N Rk Nsfx Ah Uok - Rectangle 120 x 100 mm - Largest opening width of the pneum. Machine vice 160 mm - Drive 400 V / 3 kW - pneumatic connection 6 - 8 bar - Coolant device - infeed - roller conveyor 1000 mm - Discharge - roller conveyor with stop + digital measuring device 4000 mm - Space requirement approx. W 7500 x H 2050 x D 1100 mm - Weight approx. 1200 kg

Condition: good (used), Working length 6000 mm 12-position automatic tool changer Nedpfswlzg Nsx Ah Uolk

Year of construction: 1980, condition: good (used), machine/vehicle number: 3253-80, Offer 22045 Technical data approx: - Compressive force 10 t - throat 150 mm - Table size . 520 x 320 mm - Table height adjustable 160 mm - drop-through hole in table 165 x 125 mm - gr. installation height 220 mm - ram surface 240 x 150 mm - mortise in ram 30 mm - ram adjustability 40 mm Nlsdpfxsktg Dho Ah Ujk - stroke adjustment 4 - 60 mm - stroke rate 130 1/min - hydr. actuated clutch - Two-hand operation - E. foot switch - separate switch cabinet - drive 380 V / 1,1 kW - space requirement approx. W 1000 x H 1800 x D 1100 mm - weight approx. 1300 kg

Condition: used, Single column eccentric press WEINGARTEN type ERV 40 Machine No. 537 / 65 Year of construction 1965 Compressive force 40 ton. throat 230 mm table size 570 x 470 mm ram surface 250 x 200 mm clamping spigot bore Ø 40 mm installation height max. approx. 520 mm stroke adjustment 8 - 88 mm slide adjustment travel 63 mm Stroke rate 70 strokes per minute Drive power 3 kW Mains connection 380 Volt, 50 Hz - Table height adjustment - Overload protection by crushing plate - clutch-brake combination by WEINGARTEN friction thread clutch Nlodpfx Aoffm Hhjh Usk - electric 2-hand operation and foot switch - central lubrication via hand pump space requirement L x W x H 1600 x 1150 x 2300 mm weight approx. 2,6 ton.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1500050209, bar length: 12,000 mm, Bar machining center was purchased in 2022 as part of a partial business acquisition. For this purchase, an appraisal was prepared by the original owner. (Appraisal attached) The machine has hardly been used over the past three years as we have two other machining centers. Nsdpfx Ahsxlq Rbe Uslk Bar machining center ex works (can be dismantled and collected at any time)