Used Wood Gripper for sale (16,825)

Year of construction: 1999, condition: ready for operation (used), This WEIMA WL 4 was manufactured in 1999. It features a robust 18.5 kW motor and operates at 400 V, 49 A, with a speed of 90 rpm. The feed opening measures 800 x 600 mm, accommodating various wood sizes for efficient chipping. Consider the opportunity to buy this WEIMA WL 4 wood chipper. Contact us for more information. Lsdpfx Aoxpklmjf Njai Application Types Other Woodworking Machinery

Condition: excellent (used), CATALOG NUMBER 7769 TECHNICAL DATA Laodpfoxix Szjx Af Nsi - Loading hopper dimension (top, L/W): 650x240 mm - Rotor width: 360 mm - Motor: 7.5 kW - Screen: 8 mm - Knife width: 90 mm - Number of knives: 3 rows of 4 pcs - Throughput: approx. 700 kg/h - Extraction outlet diameter: 100 mm - Dimensions (L/W/H): 1200x830x1440 mm - Weight approx.: 300 kg FEATURES – Made in Poland – Unpainted – Mobile – Very good condition – Used chipper Net price: 16,900 PLN Net price: 4,020 EUR (depending on exchange rate 4.2 PLN/EUR) (Prices may change due to exchange rate fluctuations)

Condition: used, mileage: 1,405,000 km, Year of construction: 2006, Serial number: XLER6X2000512xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20683 Specifications: Model year: 2006 Mileage: approx. 1,405,000 km Transmission: Opticruise Suspension: Full air Tires: See photos Body: Vang body with hydraulic roof and side Tipping: Rear tipping Laedpfx Afowqwlrj Nei Length: 870 cm Width: 255 cm Wheelbase: 410 / 136 cm Curb weight: 12,590 kg Engine power: 500 hp Fuel type: Diesel Equipment: Tool compartment Slirej sand spreaders Bull bar Auxiliary driving lights 2x bunk beds Radio/CD Air conditioning / climate control Description:Scania R500 wood chip truck with Vang body, hydraulic roof, and hydraulic side opening.EU-approved until 07.10.2025.A matching chip trailer is available for an additional cost – see photos. The truck is ready for delivery. Km: 1405000 HK: 500 Technical approved: no EU-approved until: 07.10.2025 Own weight: 12590 Total Weight: 27000 Payload: 14335 Width: 255 Length: 870 Euro: 3 Model: R500 Gearbox: Automatic

Condition: used, WORK TO BE REPRODUCED ON THE SCOLPITRICE TYPE T4: 2 left-hand pieces, Ljdpfxextqpme Af Nsai 2 right-hand pieces, Spindle center distance: 220 mm, Maximum working length: 1250 mm.

Condition: excellent (used), Year of construction: 2000, Gross single-shaft shredder GAZ 62, year of manufacture 2000, 18.5 kW, cutting system with 30 Karo blades, rotor ø 248 mm, extraction nozzle 160 mm, hopper capacity 0.6 m³, hydraulic push floor, opening 600 x 800 mm, length 1800 x 1200 mm, height 1700 mm, weight 1300 kg Lajdpfx Aexnc Ttef Noi

Condition: new, Japa® 505 PRO – Top Performance and Versatility for the Highest Demands The Japa® 505 PRO with PTO and electric drive is the ideal choice for demanding professionals who require maximum performance and consistently first-class firewood. This PRO model combines all the advantages of the basic Japa® 505 model – such as the precise Perfect Cut saw system – with enhanced features that take functionality and operating comfort to an entirely new level. ⚙️ Technical data: Log diameter: 500 mm Splitting force: 16 t Splitting wedge: 6-way Log length: up to 50 cm Oil capacity: 100 l PTO speed: 500 rpm Motor output S1: 15 kW / 400 V Gear oil: 80W 90 Conveyor length: 4,400 mm Lsdpfxoxx T Aae Af Njai Weight: 2,330 kg Original photos & honest descriptions. Shipping by arrangement. Fair prices. ❓If you have any questions, just contact us – we respond quickly & courteously!

Year of construction: 1999, condition: ready for operation (used), General Data Machine weight 3200kg This WEINIG Unimat 23 E was manufactured in 1999, designed for efficient wood planing. Ideal for woodworking professionals looking to enhance their production capabilities. Contact us for more information. Laodoxn U Amepfx Af Nsi Application Types Planing

Condition: excellent (used), Catalogue number 7259 TECHNICAL DATA - Infeed width: 400 mm - Infeed height: 200 mm - Shaft width: 530 mm - Shaft diameter: 550 mm - Knife length: 530 mm Lasdperit Nlefx Af Nsi - Number of knives: 2 pcs - Screen dimensions: 50x50 mm - 2 lower toothed feed shafts - Lower shaft motor: 2.2 kW - Upper toothed feed shaft - Upper shaft motor: 2.2 kW - Conveyor belt feeder: 0.55 kW - Feeder belt length: 3000 mm - Feeder belt width: 410 mm - Main motor: 45 kW - Auto-reverse - Reverse operation - Machine dimensions (L/W/H): 2900x1600x1600 mm - Feeder dimensions (L/W/H): 3070x720x670 mm - Weight approx. 3500 kg ADVANTAGES – German manufacture – Auto-reverse (adjustable) – Reverse function – Used shredder in very good condition Net price: 85,900 PLN Net price: 20,450 EUR depending on exchange rate 4.2 EUR (Prices may change with significant exchange rate fluctuations)

Condition: used, VACUUM DRY KILN for massive wood second han machine volume: 10 m3 diameter: 150 cm n.12 aluminum plates with loading trolley machine overall dimensions: total length: cm.630 width: cm.185 weight: kg.3000 Laodpfx Afjxxlade Nei

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. Laedpfexwhw Ajx Af Nei FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Year of construction: 2023, condition: as good as new (ex-display), Joy in the forest Krpan CV a dream! KRPAN is the largest manufacturer of forestry winches in the world and also produces log splitters at the highest quality level! Lajdpfx Afounmwce Noi We have all models in stock and can deliver immediately. For a detailed description see .pdf data sheet in documents.

Condition: new, 26-HT-Wooddry365-SET Wood Drying Kit WoodDry 365 SET Our wood drying kit provides everything needed for rapid and effective wood drying. The set includes a high-performance WoodDry 365 automatic controller, a professional wood dehumidifier, two fans, two sensors, and a heater. The user-friendly operation ensures effortless handling and delivers outstanding drying results with minimal effort. CE compliant 100% Made in Austria (designed, manufactured, and quality-tested) Advantages and Features: - Complete Set: All essential components required for efficient, comprehensive wood drying are included. - Compact and Space-Saving Solution: All components are perfectly matched and require little space, making the system suitable even for smaller workshops or rooms. - Easy Operation: The intuitive WoodDry 365 controller is easy to use, suitable for both beginners and experienced users. - Optimal Drying: Thanks to the heating unit and two fans, air circulation is optimized for faster and more uniform wood drying. - Energy Efficient: The kit operates with high efficiency, ensuring low operating costs combined with excellent results. - Versatile Application: Ideal for drying wood for furniture production, woodworking, or other projects. Also suitable for use in small to medium-sized workshops. - Automatic WoodDry 365 Controller: The proprietary control unit fully manages the entire drying process. The operator only needs to specify the wood thickness, type, and desired final moisture content. The system automatically adjusts the drying process for optimum results and energy savings. - Robust and Durable: High-quality components guarantee a long service life and reliable performance over an extended period. - Combo Sensor: Specially developed for precise measurement of air humidity, wood moisture, and room temperature. - Suitable for most softwoods and hardwoods such as spruce, beech, ash, as well as exotic woods and firewood. Oak is not recommended due to its high tannin content—similar to other dehumidifier systems, its use is limited. - The standard set with one HT100 dehumidifier can process up to 9m² of wood. Technical Data: Controller Connection: 16A. Dehumidifier Rated Power Consumption: 1050W Airflow: 1100 m³/h Maximum Dehumidification Capacity: 100 liters / 24h Dimensions: 516 x 516 x 656 mm Weight: 48 kg Heater Heating Output: 9.0 kW Dimensions: 455 x 275 x 300 mm Air Output: 1,150 m³/h Fans High Airflow: 102 m³/min Air Velocity: 3.66 m/s Low Noise Operation: 64.1 dB(A) Laedpfx Ajwzzg Isf Nji Power Supply: Mains operation, hard-wired power cable (230 V, 50 Hz) Dimensions: 52 x 53 x 18 cm (W x H x D) Power Cable Length: approx. 162 cm Compact Sensor Cable: 5 meter cable Measured Values: air humidity, wood moisture, temperature Optional Equipment: - 1x additional compact sensor with 10 meter cable - 1x additional HT100 dehumidifier – for drying up to 18m² of wood - 1x air damper with cable – for optimized drying

Year of construction: 2023, condition: ready for operation (used), Main Drive Spindle speed range 3600 RPM Spindle motor power 5 kW Tool taper ISO30 Number of axis 3 Workpiece Workpiece X 270 mm Workpiece Y 1250 mm Workpiece Z 50 mm Workpiece weight 40 kg Lodpfx Aexn U Dwjf Neai Additional Equipment 20" LCD TFT monitor Industrial PC WSC user interface with Lister, parametric tools, and parametric setup Graphical CAD programming TPA EDI32, basic version USB port Storage of all files Macro programming Import of DXF files CE compliant Main Drive Spindle speed range 3600 RPM Spindle motor power 5 kW Tool taper ISO30 Number of axis 3 Workpiece Workpiece X 270 mm Workpiece Y 1250 mm Workpiece Z 50 mm Workpiece weight 40 kg Additional Equipment 20" LCD TFT monitor Industrial PC WSC user interface with Lister, parametric tools, and parametric setup Graphical CAD programming TPA EDI32, basic version USB port Storage of all files Macro programming Import of DXF files CE compliant This 3-axis VITAP K3 CNC Wood Machining Centre was manufactured in 2023. Consider the opportunity to buy this VITAP K3 CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining

Condition: excellent (used), Year of construction: 2008, cutting length (max.): 4,250 mm, cutting height (max.): 80 mm, cutting width (max.): 4,300 mm, main saw diameter: 350 mm, power: 15 kW (20.39 HP), Machine type: fh4 430 HT220 ERB / MCS-Evolution Cutting length: 4.250 mm Cutting width: 4.300 mm Year of construction: 2008 Saw blade projection max .: 95 mm Saw blade diameter max .: 350 mm Main saw motor: 15 kW Scorer aggregate Scorer saw blade diameter max .: 300 mm Automatic cutting length adjustment Scorer aggregate, motor-driven adjustable Package height max .: 80 mm Saw aggregate forward: up to 120 m / min Saw aggregate backward: up to 120 m / min Feeder: up to 80 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 7 pcs grip push clamp Clamp opening: 90 mm Push-off trolleywith 2 pcs. Push-off devices Book aligning device for longitudinal board edges Strip aligner before and after the pressure beam Air cushion tables: 3 pc(s). 2100 x 600 mm Lsdpfxsqi Azps Af Neai Spindle lift table: - Panel width: 2200 mm - Integrated roller conveyor Feeding roller conveyor: - Length: 4600 mm - Width: 2200 mm - Transport direction longitudinal - Recesses for forklift trucks This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted!

Year of construction: 2014, condition: good (used), functionality: fully functional, machine/vehicle number: 231890, Timber drying kiln MÜHLBÖCK, complete with heat recovery system, model 1306. Depth: 4x120 cm, height: 3x120 cm, timber length: 5.20 m. Heating capacity: 225 kW. Flow temperature: 90°C. Water volume: 13 m³/h. Electrical connection power: 20 kW. Fans: 3x3.0 kW and 2x4.0 kW. Complete with control container.\n\nAdditionally, timber drying kiln VANICEK VF522/2D, year of manufacture 2000, complete. Heating capacity: 174 kW. Water temperature: 80/70°C. Water volume: 15 m³/h. Electrical connection power: 4.4 kW. Fans: 4x1.1 kW.\n\nBoth drying kilns must be dismantled by the buyer as soon as possible. Lodpsv Habijfx Af Njai

Condition: new, Year of construction: 2025, Weima single-shaft shredder Type: WL 4 Rotor diameter: 260 mm Rotor width: 600 mm Self-cutting hopper Logspaser (600x1050 mm) Motor power: 18.5 kW Double knife row with 28 pcs. Weight: 1300 kg Lodpjxwyx Sefx Af Nsai Extraction nozzle: 160 mm incl. bolted extraction trough. Screen perforation: 15 / 20 mm (or as requested and agreed) Stock machine immediately available. Price ex stock Rosenheim, excluding shipping.

Condition: excellent (used), CATALOG NUMBER 7176 TECHNICAL DATA - Loading hopper inlet: 1050x600mm - Outlet for shredded wood: 160mm diameter - Rotor working width: 590mm - Main motor: 18.5kW - Pump motor: 0.75kW - Number of knives: 14 pcs - Knife size: 30x30mm - Screen: 10x12mm - Pressing drawer - Electric auto-reverse - Dimensions (LxWxH): 1900x1200x1530mm - Weight: 990kg ADVANTAGES – Auto-reverse – German manufacturing – Unpainted – Like WEIMA WL4 – Pressing drawer – Very good condition – Used shredder Net price: 48,900 PLN Lsdpfx Aop R I Nlsf Neai Net price: 11,640 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: new, functionality: fully functional, overall weight: 650 kg, The Japa® 315+ with electric drive offers comprehensive features and high capacity in a compact, mobile unit. We have increased the capacity – the maximum log diameter is now 31 cm and the log length is 50 cm. ⚙️ Technical specifications: Maximum log diameter 310 mm Splitting force 5.6 t Splitting wedge 4-way Log length up to 50 cm Oil capacity 30 l Motor output S1 4 kW / 400V Ljdpoxx Szhjfx Af Njai Weight 600 kg Dimensions 4060 x 1330 x 2580 mm Original photos & honest descriptions. Shipping by arrangement. Fair prices. ❓If you have any questions, feel free to contact us – we respond quickly and courteously!

Year of construction: 2001, condition: ready for operation (used), This HEESEMANN BÜRKLE wood production line was manufactured in 2001. It features a comprehensive oil application line, including RBO vacuum feeding Tornado SC 1300, HEESEMANN MFA 8 with cross-lengthwise brushes, and BÜRKLE SLC 1400 roller application machines. Enhanced with a new Siemens control system in 2024, consider the opportunity to buy this HEESEMANN BÜRKLE wood production line. Contact us for more information. Lsdpjxnr Hpefx Af Noai Application Types Complete Production

Condition: good (used), Year of construction: 1994, Drum chipper, high-speed chipper with horizontal infeed max. infeed width 300 mm max. infeed height 85 mm Motor 18.5 kw Laedpfx Aju Rl Sfof Nji frequency-controlled for variable speed without vibrating chute

Condition: good (used), Gescha extraction system, very well maintained, suitable for spray mist and dust, equipped with a single-stage switch. Mounted on lockable castors for easy mobility. Can be shipped via freight carrier (price upon request). The Gescha extraction system is a premium solution for your woodworking shop, carpentry, and spray painting applications. It provides efficient and safe extraction of wood dust and paint particles, improving air quality and protecting health. This system is ideal for small to medium-sized workshops, offering reliable performance and user-friendly operation. Its robust construction and straightforward installation allow for quick and hassle-free commissioning. Lajdoxt U Rnopfx Af Nsi

Condition: excellent (used), CATALOG NUMBER 7611 Technical specifications: - Inlet dimensions: 460x180mm - Outlet diameter: 300mm - Shaft width: 550mm - Shaft diameter: 350mm - Number of knives: 10 pcs - Knives arranged in 2 rows - Autoreverse function - Knife setting device - Sieve diameter: 30mm - Feeding conveyor from top and bottom - Bottom pull shaft - Feeding conveyor length: 4400mm - Main motor: 37kW - Upper feed motor: 1.5kW - Lower feed motor: 2.2kW - Dimensions (L/W/H): 6100x1150x1000mm - Weight approx: 3500kg ADVANTAGES – German-made Lasdpfxsv Ublfe Af Noi – Autoreverse function – Feeding conveyor from top and bottom – Knife setting device – Very good condition – Used shredder Net price: 98,900 PLN Net price: 23,550 EUR Net price calculated at 4.2 PLN/EUR (Price may change with significant currency fluctuations)

Year of construction: 2003, condition: ready for operation (used), Main Drive Spindle speed range 1500–18000 Tool taper HSK F63 Ljdpfjxnr H Aex Af Neai Number of axis 4 Tools Max weight 6 kg Max tool length 200 mm This 4-axis HOMAG PROFI BAZ20/30/16/V/D was manufactured in 2003. It features a Homatic CNC control, WOODWOP CNC programming, an 18-position disk changer, and a main spindle with a 12 kW three-phase motor. Capable of handling workpieces up to 3000 mm in length and 1400 mm in width, it includes a continuous table with adjustable vacuum clamps. Consider the opportunity to buy this HOMAG PROFI BAZ20/30/16/V/D CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining

Condition: good (used), Year of construction: 2006, Drum chipper, high-speed with horizontal infeed max. infeed width 450 mm max. infeed height 140 mm Motor 75 kw with frequency converter for variable speed no vibrating chute included Lodsu Rl Ruspfx Af Noai

Year of construction: 2021, condition: ready for operation (used), Main Drive Spindle speed range 24000 rpm Spindle motor power 12 KW Tool taper HSK F63 Number of axis 3 Movement X-Axis Movement 3500 mm Y-Axis Movement 950 mm Z-Axis Movement 80 mm Table Table load 130 kg Tools Max weight 7.5 kg Laedpfxexnd I Es Af Nji Additional Equipment Teleservice package via Internet Automatic central lubrication 4-fold linear changer for use with power packs This 3-axis FORMAT4 Creator 950 CNC Wood Machining Centre was manufactured in 2021. Ideal for precision woodworking, it offers robust construction and advanced control features. Consider the opportunity to buy this FORMAT4 Creator 950 CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining