Used Woodturning Lathes for sale (5,280)

Condition: not inspected (used), Year of construction: 1998, overall weight: 4,200 kg, Fanuc 21T control 12-position turret Nwodez Akxyjpfx Abusn Working envelope: 600 x 350 mm Spindle speeds: 3500 RPM

Condition: used, Offered 250mm. Feed steps: 12. Cross-bed feed: 0.05-3mm/rev. Carriage and rotating section feed: 0.04-2.5mm/rev. Feed motor speed: 1000rpm. Feed motor power: 2.2kW. Permissible workpiece weight, cantilevered with a center of gravity distance of 300mm: approx. 5000kg. Permissible workpiece weight between centers, without additional support: 20000kg. Equipped with a large faceplate with clamping devices, cross-bed support, movable tool slide and mechanical lever controls. Inspection possible by arrangement. Nwodpo Afpkqofx Abusn

Condition: used, Offered is a conventional shaft lathe with tailstock. Swing over bed: 630mm. Swing over cross slide: 360mm. Center height above bed: 286mm. Spindle bore: 60mm. Spindle diameter at front bearing: 140mm. Number of spindle speeds: 30. Number of longitudinal feed steps: 41. Number of cross feed steps: 41. Longitudinal feed: 0.064-6mm/rev. Cross feed: 0.025-2.32mm/rev. Maximum workpiece weight according to manufacturer: 6000kg. Metric thread pitches: 0.219-48mm. Equipped with a large chuck, tailstock, four-way tool post, longitudinal and cross slides, as well as mechanical control levers and handwheels. Inspection possible by arrangement. Nwjdpfxe Afpk Rs Abujn

Condition: used, Offered is a single-column vertical turret lathe with tool turret. Equipped with a large rotary table with radial clamping slots, clamping brackets, vertical tool slide with turret head, digital position readout, work light and separate control panel. Inspection possible by arrangement. Njdpfj Afplbex Abuewn

Year of construction: 1977, condition: used, Offered is a conventional center lathe with lead screw and feed rod. Thread cutting: metric and imperial threads. Speed and feed selection: mechanically via gearbox. Workpiece clamping: three-jaw chuck. Tool holder: four-way tool post. Equipped with longitudinal and cross slides, tailstock with quill, lead screw and feed rod, digital position readout and work light. Inspection possible by arrangement. Nsdpj Afpluefx Abuown

Condition: used, Year of construction: 2009, machine/vehicle number: 97050022, turning length: 550 mm, turning diameter: 350 mm, spindle speed (max.): 3,500 rpm, spindle motor power: 18,500 W, bar passage: 74 mm, The Saeilo Contur MSL 450 is a used CNC turning machine, manufactured in 2009 (first commissioning in 06/2009), equipped with a Siemens Sinumerik 810D control system. It can turn parts with a diameter of up to 350 mm and a length of up to 550 mm, with a bar capacity of 74 mm. This makes it suitable for chuck and bar work in small and medium-sized series. The machine is located in the Düsseldorf area and was operational during our inspection. TECHNICAL DATA - Year of manufacture: 2009 - Control system: Siemens Sinumerik 810D - Maximum turning diameter: 350 mm - Maximum turning length: 550 mm - Bar capacity: 74 mm - Maximum spindle speed: 3,500 rpm - Spindle drive: 18.5 kW - Tailstock: live center, with hydraulic quill actuation EQUIPMENT AND ACCESSORIES - Chip conveyor, Hwang Kang (hinged belt) - Tool holders, fitted - Turning and clamping tools - Setup tools CONDITION The machine was operational during our inspection on 01.10.2026. We can send you short videos of the machine in operation upon request. Nedpfoz H Uc Ijx Abujwn AREAS OF APPLICATION Suitable for flanges, bushings, bolts and shafts up to 550 mm in length, for example in mechanical engineering, hydraulics and contract manufacturing. LOCATION AND HANDLING The machine is located in the Düsseldorf area. Inspection is possible by appointment. Disassembly, loading and transport are organized by the buyer; upon request, we can provide you with contact details for freight forwarders in the region. Price on request. Please contact us via the contact form.

Condition: used, Multispindle lathe GILDEMEISTER AS 32 Nwjdpfx Abs Afz Smjusn

Condition: used, Year of construction: 2008, Distance between centres 1500 mm Center height 250 mm Swing over bed 500 mm Swing over cross slide 300 mm Swing in gap 710 mm Length of gap 240 mm Spindle bore 82 mm Spindle speeds 11-1600 rpm Automatic feeding Rapid feeding Equipped with: 3 quick change tool holders 2 axis dro 4-jaw chuck (400 mm) Nwodpoz Szm Sjfx Abuon Steady rest (270 mm) Face plate (650 mm)

Condition: used, Year of construction: 1995, machine/vehicle number: .04503009, with CNC control, manufactured by OKUMA, type: OSP 7000 L, max. turning length: 1000 mm, max. turning diameter: 250 mm, with tool turret with 12 tool positions, all 12 tool positions suitable for driven tools, with filter system and chip conveyor. Nwodpjz Nhrvefx Abusn

Condition: used, Year of construction: 2011, turning diameter over cross slide: 75 mm, turning diameter: 381 mm, spindle speed (max.): 3,500 rpm, spindle bore: 75 mm, travel distance Z-axis: 850 mm, total height: 2,325 mm, total length: 4,820 mm, total width: 2,100 mm, overall weight: 8,000 kg, CNC Lathe with Y-axis, driven tools and 2nd Spindle CNC Control Fanuc series 18i-TB Turning diameter 381 mm Spindle bore diameter 75 mm Spindle speed 3500 R/min Spindle motor 22/15 Kw Movement X-axis 190 + 69,5 mm Movement Y-axis +55 / -55 mm Movement Z-axis 850 mm Movement W-axis (subspindle to mainspindle) 830 mm Nedpfszv Smfsx Abuown Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper VDI 40 Bar feeder Irco-Breuning ILS MUK Spindle motor driven tools 4000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), ROMI GL 240 2 Axis CNC Lathe Nodpfxezu Nggo Abujwn Swing over Z axis cover mm 420 Maximum cutting diameter mm 300 Maximum cutting length mm 400 Travel (X axis) mm 188 Travel (Z axis) mm 400 Spindle nose ASA A2-5" Spindle hole diameter mm 58 Bar capacity (dia.) mm 51 Speed range rpm 6 to 6000 Rapid traverse (X & Z axis) m/min 30 Number of stations atc 12 AC spindle motor hp/kW 20/15

Condition: new, Year of construction: 2026, faceplate diameter 2000 mm swing diameter 2500 mm turning height 1600 mm control Fanuc 0i-D stroke of vertical slide 1000 mm tool holder 1 distance face plate/tool carrier 1075 - 1875 mm vertical adjustment of the crossrail 800 mm workpiece weight 13 t faceplate turning speed range -stepless- 1 - 200 U/min feeds mm/min Nsdpfjzzd Ryjx Abuswn rapid traverse 10/12 m/min weight of the machine ca. 42 t This machine is a new machine with (C) or without milling spindle. It will be sold with full service and warranty by Wirths GmbH (Price without live tooling). Control: Fanuc 0i-D. Machine has safety guard and 12/18 (C) position ATC.

Condition: ready for operation (used), turning length 450 mm turning diameter over bed 245 mm turning diameter over slide rest 135 mm spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm turning speeds 60 - 3000 U/min bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V weight of the machine ca. 340 kg. range L-W-H 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts Nwjdpfx Abszbc Daeuen The Primus series is the most compact precision sliding headstock and sliding headstock lathe(LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" - three-jaw chuck - Folding lathe chuck guard - chuck key - MULTIFIX steel holder with 3x inserts - Sliding tailstock - Control panel, front left - infinitely adjustable feeds for flat and top support - Pole-changing drive motor - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. - EMERGENCY OFF button at the front

Condition: good (used), Year of construction: 2010, operating hours: 5,750 h, functionality: fully functional, turning length: 393 mm, turning diameter: 200 mm, spindle bore: 51 mm, MSX 853 cnc control 3-jaw chuck diameter 210mm 12-fold revolver C-axis driven tools tail stock coolant device chip conveyor Nedpfxezd S S Ro Abuswn Technische Daten: / technical details Drehdurchmesser / turning diameter 200 mm Drehlänge / turning lenght 393 mm X-Weg / X-travel 160 mm Z-Weg / Z-travel 450 mm max. Drehzahl Spindel / max. spindle speed 50-3000 UpM /rpm Eilgang X/Z / rapid feed X/Z 24/30 Anzahl der Revolverplätze / number of tool places 12 max. Stangendurchmesser / max. bar diameter 51 mm Antriebsleistung Spindel / drive capacity spindle 13,5 kW Gewicht ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2009, turning diameter max. 750 mm turning length 3.500 mm turning length Standard: 3.071 mm control Sinumerik 840 D Siemens Njdpfx Aezluhwsbuown Working height 1.300 mm x-travel 435 mm z-travel 3.071 mm max. workpiece weight between centers 2.000 kg turning speed range - main spindle 10 - 3.000 min/-1 power capacity - main spindel 61,2 / 195 kW max. Torque 779 Nm spindle head A 11 DIN 55026 Spindle speed range subspindle 10 - 3.000 min/-1 power capacity - Sub spindle 73 / 233 kW max. Torque 932 Nm spindle head A 11 DIN 55026 spindle diameter in front bearing 180 mm U-axis min. -5 - max. 430 mm w-axis min. 276 - max. 3.347 mm tool taper VDI 50 number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 3.000 min -1 power capacity - driven tool-stations 9,7 kW Torque 50 / 31 Nm x-axis Y0: min. -25 - max. 410 mm x-axis Y+55: min 70 - max. 505 mm x-axis Y-55: min -120 - max. 315 mm y-axis -55 - +55 mm z-axis min. 676 - 3.747 mm tool taper VDI 50 number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 3.000 min -1 power capacity - driven tool-stations 9,7 kW Torque 50 / 31 Nm feed speeds X: 0,1 - 18.000 mm/min feed speeds Z: 0,1 - 30.000 mm/min rapid power traverse in X-and Z direction 18 / 30 m/min Feed force 15 kN total power requirement 85 kVA weight of the machine ca. 26,5 t dimensions of the machine ca. 9,0 x 4,0 x 3,3 m CNC Lathe NILES SIMMONS - N 30/3LT - 3500 - Extensive accessory package - NOT INCLUDED: Tools on the turrets! - Full-stroke clamping cylinders on BOTH spindles

Condition: used, Year of construction: 1963, turning diameter over bed 390 mm turning diameter over slide rest 190 mm Nodsy Tyyqopfx Abuown turning length 1000 mm turning dia. in gap 460 mm spindle head DIN 55026 Gr. 6 spindle bore 52 mm turning speed range 11,2 - 2240 U/min power requirement 7,5 kW bed width 355 mm dimensions 2,8 x 1,3 x 1,6 m weight of the machine ca. 1,9 t Equipment: - Multifix "B" with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jaws

Condition: good (used), Year of construction: 1979, functionality: fully functional, Lead and Feed Spindle Lathe Manufacturer: WEILER, Type: COMMODOR Year of manufacture: 1979 Technical data Manufacturer: Weiler Type: Commodor Swing over bed: 400 mm Distance between centers: 1000 mm Spindle bore: 50 mm Spindle speed range: 63-2000 rpm Drive power: 4 kW Dimensions: approx. L 2.2 x W 1.0 x H 1.7 m Weight: approx. 1.5 t Equipment Nsdpjz Ahuxefx Abuewn • 3-axis digital display • Drill chuck • 3-jaw chuck, manufacturer: Röhm, D200mm • Multifix holder • Additional 3-jaw chuck that is on the machine is not included in the scope of delivery! All information is subject to change without notice. A live demonstration is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Used CNC lathe Nedpfsz Ant Ujx Abuswn Manufacturer: Böhringer Model: NG 180 Year of manufacture: 2004 Equipment: includes steady rest

Condition: good (used), Year of construction: 1997, functionality: fully functional, Used CNC turning machine Manufacturer: Böhringer Type: VDF 250 Cm Nwedpfoz Anv Nex Abuon Year of manufacture: 1997 with accessories.

Condition: refurbished (used), Year of construction: 1998, workpiece weight (max.): 15,000 kg, travel distance Z-axis: 1,000 mm, chuck outer diameter: 1,750 mm, spindle speed (max.): 400 rpm, turning diameter: 2,100 mm, turning height: 1,350 mm, rotational speed (max.): 3,000 rpm, feed force Z-axis: 50,000 N, year of last overhaul: 2026, The Millennium provides very high precision turning and versatile machining capability. Always precise, always powerful. Features of this machine:- – Involute chain drive for very high speeds, very low noise – a 36” diameter Timken cross roller bearing, the ultimate bearing – see last page – All steel 1750mm dia. 4 jaw chuck for high speeds. Maximum loading 15,000kgs. – A servo powered C axis control that provides backlash free C axis movement – high power and high accuracy – 200mm square forged steel ram - high accuracy heavy cutting when required and incorporating a 15KW ISO 50taper live spindle providing speeds 20 to 3000rpm for rotary contour milling, pcd drilling and angle milling and grinding with attachments (new heads can be provided to order). 1350mm maximum height under ram – Automatic pick up of turning tools, live tools and attachments from the 18 pocket tool magazine Njdpfx Aoy Uwxtsbuown – Raise and lower crossrail - high precision latching and clamping at 200mm pitches – flexibility without loss of accuracy Fanuc 18Ti. A very precise, powerful and versatile machine tool. Performs all functions shown in photo gallery 12 months guarantee

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, feed length Z-axis: 1,000 mm, workpiece weight (max.): 15,000 kg, spindle motor power: 37,500 W, spindle speed (max.): 415 rpm, turning diameter: 2,100 mm, turning height: 1,300 mm, workpiece diameter (max.): 2,100 mm, year of last overhaul: 2026, As with all Millenniums this machine has the wonderful base structure and table drive design that makes all the production wishes possible – the highest accuracy and the highest chip removal Nwsdpfxey Uw Sgo Abusn When this machine is delivered to the customer it will have been fully serviced and refurbished to ensure those qualities are ready for you to use turning, pcd drilling, rotary contour milling, angle drilling, grinding – see it all on the Millennium films on the website Only the best machine tools are designed and built with this quality and strength

Condition: new, turning length 2000 mm turning diameter 560 mm turning diameter over slide 350 mm turning speeds 25.0 - 1500 U/min swing diameter over bed slide 350 mm turning dia. in gap 785 mm quill travel 180 mm quill: 5 MK spindle bore 105 mm spindle taper DIN 55029 D 1-8 engine output 7.5 kW weight of the machine ca. 2720 kg range L-W-H 3340 x 1150 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Clamping disc 450 mm - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - 2 centering points - Initial filling with Shell Tellus 46 - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE Nedpfx Ajxabtpebujwn - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Slip clutch - LED machine light - Change gears - Reduction sleeve - Chip back wall - Operating tool

Condition: ready for operation (used), Year of construction: 2002, turning length 750 mm turning diameter 310 mm turning diameter over slide rest 175 mm spindle bore 32.0 mm tailstock quill taper MT 3 MK turning speeds 85 - 2200 U/min bed width 200 mm spindle taper DIN 55027 GR 5 total power requirement 2.2 kW weight of the machine ca. 710 kg range L-W-H 1884 x 717 x 1262 mm New price ~ 20.000 euros from a technical college (!!) - in checked condition - machine videos - ?v=iqU7Bkh6INo ?v=aSViqjk51Ik Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - "NEWALL" digital display, front left Nodsxab Tpepfx Abuewn - MULTIFIX steel holder with 4x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning diameter over support 175 mm - Spindle bore 32 mm - bed width 200 mm - Spindle mount / DIN 55027 GR 5 - Spindle taper 4.5 M - Spindle speed 85 - 2000 rpm. - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 770 kg

Condition: new, turning length 1500 mm turning diameter 420 mm swing diameter over bed slide 255 mm turning dia. in gap 580 mm spindle bore 52.0 mm turning speeds 45 - 1800 U/min bed width 250 mm spindle taper DIN 55029 D 1-6 taper in tailstock 4 MK quill travel 140 mm total power requirement 3.0 / 4.5 kW weight of the machine ca. 1400 kg range L-W-H 2570 x 900 x 1600 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Coolant system - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Slip clutch - Turret stop with fine adjustment - Thread gauge Nwjdpfoxab Umex Abujn - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Initial filling with Shell Tellus 46 - LED machine light - Change gears - Reduction sleeve - 2 centering points - Chip back wall - Operating tools - Operating instructions

Condition: used, turning length 800 mm turning diameter 280 mm turning diameter over slide rest 150 mm spindle bore 42.0 mm tailstock quill taper MT 3 MK bed width 208 mm turning speeds 42 - 2022 U/min spindle taper DIN 55027/5 quill stroke 90.0 mm voltage 380 V total power requirement 3.0 kW weight of the machine ca. 750 kg range L-W-H 1800 x 800 x 1250 mm Nwjdexacg Rjpfx Abujn Due to its design (type, performance, feed rates, etc.) it can be used successfully in training workshops, but also for toolmaking and repair shops. Equipment: - robust conventional lead/spindle lathe - WMW 3-jaw chuck Ø 150 mm - faceplate 280 mm - MULTIFIX quick-change holder, with insert - movable tailstock - chuck key - machine base with storage area - pole-changing drive motor - operating instructions