Used Woodwop for sale (38)

Condition: excellent (used), AUTOMATIC MULTI-BORER "WEEKE" In line with another machine possible Numerical Control Power Control Software WoodWop (TOPDRILL BST 500) Through-feed motorized transport belts (No.) 2 (with adjustable speed) Horizontal units/supports (No.) 2 Drilling heads/Blocks for each horizontal unit (No.) 2 Spindles for each horizontal drilling head (No.) 11 Max. working width (mm) 3000 Min. working width (mm) 250 Bottom vertical units/supports (No.) 6 Drilling heads/blocks for each bottom vertical unit (No.) 2 Spindles for each drill head of the bottom vertical supports (No.) Various Top vertical units/supports (No.) 2 Drilling heads/block for each top vertical unit (No.) 2 Spindles for each drill head of the top vertical supports (No.) Vertical top pressure clamps (No.) 6 Transport belt to evacute chips (wastes) Iiedpfx Agsh Ryhno Noh Quota (axes) digital display Total installed power (Kw) 26

Condition: ready for operation (used), Technical characteristics Workpiece length max: 5200 mm - for tool Ø 25: 5375 mm Workpiece width max: 1400 mm - for tools Ø 25 mm: 1550 mm Workpiece thickness 300 mm max up to 60 mm with a standard clamping device Console table: consoles with front stop 8 units Rear stop (fixed) 4 units Lifting rails Console length 1340 mm Side stops left 2 units - right 2 units Suction cups 160 x 115 x 100 mm 16 units Suction cups 125 x 75 x 100 mm 8 units Vacuum pump 140 m3 / h Modern control system from a WINDOWS computer WINDOWS XP operating system Industrial pc 17 inch flat screen Ethernet network connection WOODWOP program Voltage 400 V 50/60 HZ Additional vacuum pump 100 m3 / h Chip conveyor belt 13-spindle drilling head 9 vertical 6 x drilling spindles 4 Y-drilling spindles 4 horizontal spindles 2 pins in X 2 Y-pins Main spindle 11kW HSK F63 Liquid cooling 1000/24000 rpm Ø of tools 180 mm max C axis including C axis tilt drive Unlimited swivel range 12-station tool changer Ø 135 mm CONSOLE LED positioning system Caractéristiques usinageWindows PCVacuum pump Power and Motors Voltage: 400 V Pluging: Three-phased Iiodst Eyglepfx Ag Noh Overall dimensions

Condition: excellent (used), Year of construction: 2007, operating hours: 23,983 h, functionality: fully functional, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, spindle speed (max.): 7,500 rpm, TECHNICAL DETAILS Workpiece length: 200 – 2,500 mm Workpiece width: 70 – 1,000 mm Workpiece thickness: 4 – 80 mm Power and Operation Operating power: 21 kW Software: WoodWop 4.5 Speeds Rapid traverse X-axis: 130 m/min Rapid traverse Y-axis: 80 m/min Rapid traverse Z-axis: 50 m/min Spindle Spindle speed: 1,500 – 7,500 rpm Compressed air and extraction Compressed air requirement: 7 bar Dust extraction: approx. 4,450 m³/h MACHINE DETAILS Iiodpfxewi Inzo Ag Njh Dimensions (L x W x H): approx. 7,300 x 3,700 x 2,100 mm Weight: 5.5 t Operating hours: 23,983 h Workpiece counter: 102,199 pieces

Condition: excellent (used), Year of construction: 2004, 4-axis machine with console table, Iisdpfxstv D Elo Ag Nsh 6 supports manually movable in X, 3 vacuum cups per console, vacuum pump 100m³/h Vacuum connection for templates LED display for suction cup position display Working range X: 200 - 3250 mm Working range Y: 70 - 1220 mm Working range Z: 12 - 100 mm (passage 150 mm) 12 vertical drilling spindles 6 horizontal drilling spindles, 4 of which in X direction and 2 in Y direction. Grooving saw in X-direction Milling spindle 12 kW up to 24000 rpm with C-axis 360° interpolation, liquid circulation cooling - WZW 8-fold front and 8-fold rear Tool changing aid at the front right POWERCONTROL PC 85T control unit with TFT 17″ WoodWop 5.0 incl. MDE and production list software Operating terminal Adapter units (included in the scope of delivery): -Lock box 2 spindles with blow-off nozzle Barcode scanner

Condition: good (used), Year of construction: 2008, functionality: fully functional, We offer for sale: WEEKE (Homag Drilling Systems) – OPTIMAT BHC 200 – High-Precision CNC Machining Center Technical data: • Year of manufacture: 2008 GUIDE SYSTEM AND DRIVE TECHNOLOGY • Dust-protected linear guide system • Rack-and-pinion drive in X-axis; ball screw drive in Y- and Z-axes • Axis travel: Isdowx Iidepfx Ag Njih - Y = 1822 mm - Z1 = 300 mm - Z2 = 185 mm • Worktable: - X = 5250 mm (length) - Y = 1250 mm (width) - Z = 100 mm (thickness) (Optimat BHC200) • Control system: HOMAG PowerControl/woodWOP • Equipment: o Automatic tool changer o Multi-spindle drilling head o Integrated vacuum table for secure clamping o Suitable for machining wood, plastics, and light metals • Condition: Good; very well maintained, serviced regularly / last service 03/25 • 10/2022 – Machine upgrades: - New industrial PC (Siemens Industrial PC) - woodWOP 8 / Windows 10 update Advantages of the HOMAG BHC200: • Precise and efficient machining of a wide range of materials • Ideal for joineries, furniture manufacturers, and custom productions • Reliable performance even for demanding projects Scope of delivery: • Machine + industrial PC • Operating manual • CE SAFETY AND PROTECTION DEVICES - Side and rear safety fencing - Three-segment safety tread mat in the front area allows loading of workpieces in the non-active working zone Inspection and test run on site are welcome! Dismantling and transportation are to be arranged by the buyer.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0-201-21-4348, travel distance X-axis: 5,800 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 600 mm, controller manufacturer: HOMATIC, controller model: PC85, workpiece length (max.): 5,860 mm, workpiece width (max.): 1,600 mm, total height: 2,950 mm, total length: 11,500 mm, total width: 7,500 mm, spindle motor power: 7,500 W, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, HOMAG BAZ 722/58/K Isdpfx Aowpb Nfjg Njih Portal 4-axis CNC machine with 2 shuttle tables and gluing unit Year of manufacture: 2004 Maximum workpiece dimensions: Workpiece length X max. (with gluing unit) - max. 5660 mm for single allocation - max. 2680 mm for pendulum operation Workpiece length max. (cutter D=25mm) - max. 5860 mm for single allocation - max. 2870 mm for pendulum operation Workpiece width Y max. - max. 1300 mm - all units - max. 1400 mm - with gluing unit - max. 1520 mm - with milling operation D=25 mm EQUIPMENT / SPECIFICATION Console table / vacuum system - 2 independently operating shuttle tables in Y direction (2 Y-axes) - Both shuttles can be used synchronously (moved) for processing large workpieces (single processing). - 6 movable consoles per shuttle (total 12), each with 1 longitudinal stop at the front Each console fitted with a lift-off rail on the side - Console length 1340 mm - 3 retractable side stops 2 x left, 1 x right (mirrored) - Approx. 20 block suction cups 160x140 mm - 2 vacuum pumps, capacity 100/140 m3/h, 1 x for left field, 1 x for right field Milling spindle / units / tool changer - Main spindle 7.5 kW (in S6 or S1 operation), n max = 18,000 1/min, vector-controlled HSK F63 tool clamping Liquid cooling with temperature monitoring NOTE: The main spindle was replaced in 2021. - C-axis with unit interface - Additional spindle with permanently mounted gluing unit (own X and C axis), 360° gluing, with butt gluing - Double edge roll holder, automatic edge change - Fixed drilling head with 12 vertical spindles (individually selectable) / 6 spindles in X and 7 in Y direction, Drive motor 4 kW, 4500 – 6000 1/min - 18-fold tool changer (rotary type) - Saw and crosscut unit for tool changer - Drilling and milling unit 4 spindles (2 * X-, 2 * Y-direction) - Combination flush-milling and scraping knife unit Chip extraction / safety / other - Chip conveyor belt in machine body - Safety fence left and right of the machine, 1 door with safety functions - Extraction nozzle Control / software: • PowerControl PC85 operating system NOTE: Both machine computers were replaced in 2020. • WoodWop 5.0 • Woodscout • Power supply 400 V, 50/60 Hz • Cooling unit for switch cabinet • Laser positioning Mr. BEAM Machine dimensions (occupied area after installation) L 1150 x W 700 x H 290 cm Availability: immediately

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Numerical Control PowerControl (Software woodWOP) Safety cabin (enclosure) of the working head Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) WEEKE Prepositioning Unit - to position workpieces in machines with clamp grippers faster. In-feeding working table (panel support) and Out-feeding table (with motorized belts) With pushing system to automatically infeed the workpiece Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 2500 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) Iiodslkdpmjpfx Ag Nsh WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 23 Vertical drilling spindles (power Kw 2.3) No. 5 Horizontal drilling spindles (4 in X + 1 in y) WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 23 Vertical drilling spindles (power Kw 2.3) No. 5 Horizontal drilling spindles (4 in X + 1 in y)

Condition: ready for operation (used), Technical characteristics 5 axes Max workpiece length single 6000 mm, pendulum 2375 mm Max. workpiece width rear 1300 mm Ijdpst Ttn Eofx Ag Noih Max. workpiece thickness 300 mm, incl. clamping device Consoles with front stop 10 units 100 mm high suction cups for processing the underside of the workpiece Vacuum pump 2 x 100 m3/h Windows control system Windows XP operating system 17" TFT flat screen WOODWOP program Graphic representation of the clamping stations Modern 3D graphic interface software Remote diagnostics Operating voltage 400 V, 50/60 Hz Control cabinet can be positioned on the right or left 5-axis main spindle 15 kW drive5+ HSK F63 Liquid cooling Electronically controlled from 1000 -24000 rpm Tool length 230 mm max Tool Ø: max 180 mm for milling tools 350 mm max for saw blade use Z-axis travel 750 mm Vibration sensor for monitoring the spindle during machining Tool changer by disc 18 stations D=130 milling tool HSK F63 Place pickup for saw blade 350 mm 25 spindles drilling unit (19 vertical, 2+4 horizontal, grooving saw) Laser projection for positioning of suction cup clamp to show the contour to be milled program in WOODWOP Chip transport belt Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions Lenght: 9500 mm Width: 5000 mm Height: 3450 mm

Condition: excellent (used), Year of construction: 2014, Homag Weeke work center Mod. BMG 111/45/12/K Working range with electrospindle 4500 x 1550 mm Working range with all groups 4500 x 1250 mm Drilling head with 12 vertical spindles 4+2 horizontal blade group 0/90 Electrospindle 9 Kw 12 Hp HSK rotation speed from 1250 to 24000 rpm 4 axis rotation aggregates Circular 8-position tool changer Lateral 8-position tool changer Side tool change pick-up Special aggregate FLEX 5 HIGH PERFORMANCE drilling milling sectioning Automatic tilt adjustment 0 – 100 Shavings transport device ejection to the right 8 Schmalz work surfaces 16 suction cups Laser suction cup positioning Iedpfx Agjv Tz Hye Neih 2 vacuum pumps Control POWERTOUCH Woodwop dxf import Teleservicenet assistance CE regulation Year 2014

Condition: good (used), Year of construction: 2005, 4-axis machine with console table, 6 supports in X manually movable, 3 vacuum cups per console, Vacuum pump 100m³/h Vacuum connection for templates LED display for cup position indicator Working range X: 200 – 3250 mm Working range Y: 70 – 1220 mm Working range Z: 12 – 125 mm (clearance 150mm) 19 vertical drilling spindles 6 horizontal drilling spindles, of which 4 in the X and 2 in the Y direction. Grooving saw in X direction Milling spindle 9 kW up to 24000 rpm with C-axis 360° interpolation, liquid circulation cooling – WZW 8-position tool changer at the back Control system POWERCONTROL PC 85 with TFT 15″ WoodWop 5.0 incl. MDE and production list software Operating terminal / UPS Iiodpfswpkcusx Ag Njh Delivery includes only the tools and HSK holders shown!

Condition: good (used), Year of construction: 2011, I sell the 3-axis CNC working centre HOMAG WEEKE VENTURE 106M with beam table Year 2011. Configuration: 3-axis main spindle 9 KW Tool magazine 9 positions HSK63 1 grooving saw X-direction Drilling head 14+4+2 spindles Iodpfxevld Epo Ag Njih Useful working area 3050 x 1260mm. 2 working fields, 2 clamping areas Automatic central system of lubrication. Software WoodWop 6.0 with full instructions. Pump BECKER 110m3/hr. Good condition. Available immediately.

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Goose-neck type - Front emergency carpets Numerical Control Type PowerControl PC 85 - Software WoodWop No. 10 Supports/Rails (mm 1340) LED system (on the rails) for the vacuum pods positioning Automatic Tools Changing System (Store at No. 18 folds) Iiedpfx Aeh Ucn Reg Njh Max. useful working area (X - Y - Z) mm 6175 x 1550 x 60 Max. useful working area (X - Y - Z) in edge banding mm 6000 x 1475 x 60 No. 2 Working areas - No. 2 Vacuum pumps (capacity m3/h 100 each) Motorized carpet to evacuate the wastes from the working process Total installed power KW 27 Working groups (top) No. 17 Independent vertical boring spindles (power of the drilling head Kw 2,2) No. 4 Independent horizontal boring spindles No. 1 Vertical main Electro-spindle HSK F63 Kw 11 No. 1 Circular Saw 0°-90°) diam. (mm) 125 No. 1 Edge Banding head on board (axe Y) Power Edge, Glueing Unit (Hot Melt + Quick Melt Unit) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 2 reels/Coils)

Condition: excellent (used), Year of construction: 2017, Weeke Optimat BHX 055 Year of manufacture 2017 Main use: approx. 900 operating hours Working area X 200 – 3050 mm Working area Y 70 – 850 mm Working area Z 12 – 60 mm, special workpiece thickness: 8 mm 13 vertical drilling spindles 4 horizontal drilling spindles in X axis 2 horizontal drilling spindles in Y axis Iisdpfxswakdaj Ag Nsh Grooving saw in X direction Milling spindle 5 kW; 1250 – 24,000 rpm 4-station tool changer (WZW) Workpiece clamping system POWERCONTROL control system with 17-inch TFT flat screen, Windows XP operating system WoodWop 7.1 including MDE and production list software Delivery includes only all tools and HSK holders shown!