Used Woodworking Tools for sale (47,686)

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, -Stamping tool: Die holder with fine adjustment Fodpfxsznu Aye Anlsgf -Bore: Ø 25 mm -Dimensions: see photos -Dimensions: 300/250/H210 mm -Weight: 32.1 kg

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: Square notching die for profile steel shears and flat steel shears -Width: 50 mm -Dimensions: see photos -Dimensions: 175/60/H125 mm -Weight: 6.6 kg Fedpsznk Aisfx Anljgf

Condition: good (used), Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punching die, knife plate Fjdpfx Ajznkxwenljgf -Shearing tool: Knife plate punch die for profile steel, 6 pieces Sizes: see photos -Submission/Price: complete -Dimensions each: 188/188/H40 mm -Weight: 10 kg/pc.

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, -Punch tool: Intermediate block -Bore: Diameter 65 mm -Dimensions: see photos Fsdpfx Aneznklqsljgf -Dimensions: 370/250/H125 mm -Weight: 46.7 kg

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punch die, punching die -Punch tool: Angle notching tool, counter blade only, without notching unit -Dimensions: see photos Fgsdeznircopfx Anljf -Dimensions: 310/170/H145 mm -Weight: 24.1 kg

Condition: good (used), Die holder, separating tool, punching tool, punch, punch die, punch stamp, gill forming tool, die holder Fjdpfx Aezniqxenlogf -Stamping tool: die holder -Hole: Ø 45 mm -Bore: Ø 33 mm -Hole spacing: 180 x Ø20 mm -Dimensions: 240/85/H120 mm -Weight: 7.3 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, Fgedpfx Anezniqrolsf -Punch tool: for holding dies -Hole: Ø 100/43 mm -Dimensions: see photos -Dimensions: 345/280/H245 mm -Weight: 55.9 kg

Condition: excellent (used), functionality: fully functional, tool type: Capto C4, Offer: New, like-new turning tool holders VDI40 turning tool holder - holder shank CAPTO C4 Manufacturer: SANDVIK COROMANT Type: VDI40-CAPTO C4 Shank: Ø 40 mm ----- Consisting of: Pos1 → No.: 1405 = 1 x VDI40 steel tool holder shank C4 No. C4-RC2040-51030 Weight/piece G: approx. = 4 kg Special individual price net: €350/piece, without turning tool The integrated C4 insert holder is not included in the scope of supply. Fgjdezrmvgjpfx Anlof Price inquiry separately... ----- Last picture?: Tool holder shanks - insert holders for Capto C4 available upon request. The goods are in new, like-new and tested condition.

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, wiper, wiper plate -Scrapers: Scraper plate for punching tool, 4 pieces -Size: 10/15/30/40 mm -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 150/110/H60 mm -Weight: 6.1 kg Fgjdpfx Ansznafyslef

Condition: good (used), Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punching die, knife plate -Manufacturer: Mubea, cutting plate shearing tool for square steel / round steel -Item No.: Square steel: 27x27 mm / 50x50 mm -Round steel: Ø 31/56 mm -Number: 2x shearing tools available -Price: per piece -Dimensions: 185/185/H40 mm Fgodpfxjznadvj Anlof -Weight: 8.8 kg/pc.

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punch die, punching die -Punch tool: Angle notching tool, counter blade only, without notching unit -Hole spacing: 200/150 x Ø 18 mm -Dimensions: 255/200/H100 mm -Weight: 14 kg Fsdpfx Aezm Tmnsnlsgf

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punch die, punching die -Punch tool: Angle notching tool, notching unit -Dimensions: see photos -Dimensions: 150/130/H80 mm Fgodpfx Anezm Tkgoljf -Weight: 4.4 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, Fgjdpfx Anozm Sd Sjlsf -Punch tool: Intermediate block -Dimensions: see photos -Dimensions: 310/17/H110 mm -Weight: 22.6 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, die holder -Stamping tool: die holder -Hole: Ø 35 mm -Dimensions: see photos Fodpszm Satsfx Anlogf -Dimensions: 235/105/H130 mm -Weight: 11.1 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, die holder Fjdpezm Samofx Anljgf -Punch tool: Intermediate block -Bore: Ø 73 mm / Mounting Ø 90 mm / Hole spacing 90/75 mm M10 -Dimensions: see photos -Dimensions: 200/100/H120 mm -Weight: 6.8 kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 7,000 rpm, overall weight: 4,500 kg, CNC control Heidenhain TNC 426 Fgedpfozr D Akex Anlof electronical hand wheel manual swivel head quill coolant device measuring feeler Technische Daten: /technical details X Weg / x travel 630 mm Y Weg / y travel 500 mm Z Weg / z travel 500 mm Drehzahlbereich 2-stufig / spindle speed range (2-steps) 20 - 7000 UpM / rpm Eilgang / rapid feed 15 m/min. Spindelaufnahme / spindle taper SK 40 Gewicht der Maschine ca. / weight 4500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital display, Heidenhain active control, and continuously variable feed. Technical data: >> Year of manufacture: 1982, Machine no. 2101-1995 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Continuously variable feed in 2 axes Fsdpfx Anszrn Tyslsgf >> Rapid traverse in 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head, adjustable by 100mm on the spindle head >> Vertical quill and horizontal quill - SK40 >> Clamping system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Operating manual, parts list About the machine: Offered is a Deckel FP1 universal milling machine in very good original condition. The machine has very little backlash and all spindles move easily. Even at maximum speeds, the milling machine runs smoothly. The FP1 was in a training workshop at a university and was used very little. This newer FP1 model has continuously variable feed in two axes, and the machine also has rapid traverse in these axes. A major advantage is the active 2-axis digital display. With this Heidenhain positioning control, you can enter dimensions that the machine will automatically approach. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital display makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up.

Condition: used, BW-03 cordless hand strapping tool with 2 x batteries, a charger, a Cyklop dispenser trolley and 2.5 rolls of strapping tape. Fgsdpfx Ajzrx Nxsnlef

Condition: used, Tool sharpening machine with coolant pump. Once the correct grinding angle has been set, the tool is ground using a manual/linear feed. Technical data: - Tool shank: 35 mm Fgsdpjzrx Ihjfx Anlof - Clamping length: 65 mm

Condition: used, WIDMA UWS 650 tool sharpening machine for grinding and sharpening tools or for machining complex geometric shapes. Technical data: - Length: 1,000 mm Fgsdpfx Aezrx Hkjnlef - Width: 600 mm - Height: 1,400 mm - Mounting mandrel Ø: 30 mm - Mounting mandrel length: 135 mm

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: DC, total width: 550 mm, total length: 460 mm, total height: 490 mm, input voltage: 230 V, grinding wheel diameter: 100 mm, overall weight: 51 kg, input frequency: 50 Hz, warranty duration: 12 months, power: 0.375 kW (0.51 HP), spindle speed (max.): 5,300 rpm, For grinding HSS and carbide engraving cutters, as well as cutters with one or more lips in different shapes, such as radius cutters or negative taper angle of cutters. The universal index head is provided at 24 positions so that any particular shape angle can be obtained, a free rotation of 360° or 10° is allowed for grinding finger milling cutters, rotary drill, lathe. Tool, only replace the attachment to the index head without complicated assembly. Fedpfjq E Ry Hox Anlogf Standard accessories 3 collets: Ø4, Ø6, Ø8 mm Grinding disc ×1 Spiral drill grinding attachment ×1 End mill grinding attachment ×1 Rotary tool grinding attachment ×1 Option collets: Ø3,Ø1/8, Ø5, Ø9, Ø10, Ø12, Ø14, Ø16, Ø18 mm Max. capacity of collet Ø3 - Ø18mm Max. grinding diameter Ø18mm Conical angle 0~180 ° Relief angle 0~45 ° Negative angle 0~25 ° Speed 5300 o/min Grinding disc Ø100 x 50 x Ø20mm Motor 375W Dimensions 550 x 460 x 490 mm Weight 51 kg

Condition: used, Year of construction: 1992, functionality: unexamined, Used CNC tool milling machine, Fehlmann Picomax 51-CNC 3, year of manufacture 1992. Last documented inspection: 03/31/2023. Technical data: - Travels X/Y/Z: 420 / 240 / 120 mm - W-axis: 450 mm - Table: 730 x 280 mm - Distance from table to spindle: 0–560 mm - Maximum table load: 75 kg - Spindle power: 4 kW - Torque: 45 Nm - Speed: 50–9,000 rpm - Tool changer: SF32 - Feed rate X/Y: 1–7,200 mm/min - Feed rate Z: 1–3,600 mm/min - Drilling capacity in steel: up to 20 mm - Thread cutting: up to M20 Fgodpfx Aezrnymjnlof - Milling: up to 20 mm - Weight: approx. 1,300 kg - Connection: 3 x 380 V / 50 Hz, 10 kW - Positioning accuracy: 0.01 mm on 400 mm - Repeatability: 0.002 mm Extensive accessories and documentation as shown in the photos. Location: 65618 Selters, Germany.

Condition: excellent (used), functionality: fully functional, X-axis measuring range (tool diameter) approx. 350 mm Measuring range, Z-axis (tool length): approx. 400 mm Max. tool weight: 10 kg Tool holder/base holder: SK 50 Tool adapter: SK50 to SK40 Fodpfx Anszrtzcslsgf Measurement display with operating instructions/manuals Tool presetter in very good condition.

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators Fgedpfx Anszta I Eslof • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: used, Year of construction: 2004, total height: 1,600 mm, total length: 1,250 mm, total width: 1,400 mm, Colour: Grey Empty weight: 900 kg Price: On request - Details: - └ Description: Bad bearings - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: 102850 - Motor power: 1.0kW - Transport dimensions: 1250mm x 1400mm x 1600mm (l x w x h) Fgsdpeyr Rnzjfx Anlef - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum