Used Work Bench Grinder for sale (52,184)

Condition: used, Basic dimensions: Width: approx. 3,200 mm Height: approx. 938 mm Depth: approx. 600 mm Technical data for the workbench: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted framework ) 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm clear width: 3,000 mm 08x locking pin, used Version: sendzimir galvanized For securing the side rails against unintentional lifting out 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 3,200 mm Depth chipboard: 600 mm Surface: possibly coated (two-piece if required) 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 2,980 mm Depth chipboard: 600 mm Surface: possibly coated (two-piece if required) 06x drilling screw, new Finish: galvanized Dimensions: 6.3 x 70 mm 08x Z-bracket, used for locking / inserting chipboard Pgsdpfx Agjthfdds Ton Surface galvanized Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench 3,200 x 700 mm / 2 levels / (271.00€ incl. 19% VAT) Workbench 3.200 x 800 mm / 2 levels / (282,00€ incl. 19% VAT) Workbench 3.200 x 900 mm / 2 levels / (293,00€ incl. 19% VAT) Workbench 3,200 x 1,000 mm / 2 levels / (304.00€ incl. 19% VAT) Workbench 3,200 x 1,050 mm / 2 levels / (309.00€ incl. 19% VAT) Workbench 3.200 x 1.100 mm / 2 levels / (315,00€ incl. 19% VAT) Workbench 3,200 x 1,200 mm / 2 levels / (325.00€ incl. 19% VAT) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Basic dimensions: Width: approx. 3,180 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted framework ) 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm clear width: 3,000 mm 08x locking pin, used Version: sendzimir galvanized For securing the side rails against unintentional lifting out Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench frame 3,180 x 700 mm / 2 levels / (184.00€ incl. 19% VAT) Workbench frame 3,180 x 800 mm / 2 levels / (186.00€ incl. 19% VAT) Workbench frame 3,180 x 900 mm / 2 levels / (188.00€ incl. 19% VAT) Workbench frame 3,180 x 1,000 mm / 2 levels / (190.00€ incl. 19% VAT) Workbench frame 3,180 x 1,050 mm / 2 levels / (192.00€ incl. 19% VAT) Workbench frame 3,180 x 1,100 mm / 2 levels / (194.00€ incl. 19% VAT) Workbench frame 3,180 x 1,200 mm / 2 levels / (198.00€ incl. 19% VAT) Pjdpfsthi Husx Ag Togn Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Basic dimensions: Width: approx. 2,470 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: Polypal Type: Stockpal The scope of delivery includes: 02x workbench stand, used Material color: anthracite Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( screwed framework ) 04x Workbench traverse, used Material color: orange Box profile: 120 x 50 mm clear width: 2,300 mm 08x Locking pin, second-hand Version: sendzimir galvanized For securing the side rails against unintentional lifting out Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench frame 2,470 x 700 mm / 2 levels / (166.00€ incl. 19% VAT) Workbench frame 2,470 x 800 mm / 2 levels / (168.00€ incl. 19% VAT) Workbench frame 2,470 x 900 mm / 2 levels / (170.00€ incl. 19% VAT) Workbench frame 2,470 x 1,000 mm / 2 levels / (172.00€ incl. 19% VAT) Workbench frame 2,470 x 1,050 mm / 2 levels / (174.00€ incl. 19% VAT) Workbench frame 2,470 x 1,100 mm / 2 levels / (176.00€ incl. 19% VAT) Workbench frame 2,470 x 1,200 mm / 2 levels / (178.00€ incl. 19% VAT) Pgedpfsth N Slox Ag Tsn Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Note: The images are for illustrative purposes only. - The workbench frames are commissioned unassembled; - Production time is typically approximately 3-5 business days. Basic dimensions: Width: approx. 1,250 mm Depth: approx. 700 mm Pgodpfx Agswgicbe Ton Height: approx. 940 mm Included in delivery: 4x square tubes, used Material color: Sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole pitch: 75 x 50 mm Drill hole diameter: 13 mm 2x CS Sigma profiles, used Material color: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 970 mm 2x CS Sigma profiles, used Material color: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 420 mm 1x chipboard, used Thickness Chipboard: 38 mm Chipboard width: 1,250 mm Chipboard depth: approx. 700 mm Surface: coated if necessary (two-part if necessary) 6x self-drilling screws, new Version: galvanized Dimensions: 6.3 x 70 mm 16x screws: M12 16x nuts: M12 16x washers: M12 Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Requesting additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: excellent (used), Support belt grinder Brand: Lehnert Pgodpfx Aoyv A Dqjg Tjn Contact wheel width: 50 mm Contact wheel diameter: 250 mm Belt size: 2000 x 50 mm Motor power: 1.5 kW 380 Volt 2830 rpm

Condition: good (used), Year of construction: 2003, bench drill, pillar drill, column drill -Manufacturer: Ixion, bench drill type BT13ST -Clamping table: 170 x 170 mm -Travel distance: 210 mm -Spindle mount: Drill chuck B16 (1-13 mm) Psdpfx Aek Tuwvjg Tsgn -Protrusion: 180 mm -Speeds: 420 - 2100 rpm continuously variable -Column: Diameter 65 mm -Spindle stroke: 70 mm, with fine stop -Motor: AEG 0.7/1.0 kW -Voltage: 380 V -Dimensions: 620/235/H800 mm -Weight: 70 kg

Condition: new, ROGI surface grinder, type FSG-4080A Table dimensions ----- 406 x 813 mm Psdpfx Agoga T Iao Togn Longitudinal travel of the work table ----- 900 mm Transverse travel of the work table ----- 450 mm Overhang ----- 580 mm Max. permissible workpiece weight ----- 500 kg Grinding wheel ----- 350×40×127 mm Motor ----- 4 kW Weight ----- 3400 kg Machine dimensions ----- 3600×2630 mm

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale: 4 x Tacchella PROFLEX C3 / PROFLEX 3 C1 LR/R-B CNC external/internal cylindrical grinding machines. Pgedpfxozdv S Is Ag Tsn All four machines are from the year 2023 and are equipped with Siemens SINUMERIK ONE CNC controls. They feature hydrostatic guides, a CNC B-axis, an LR/R-B grinding head configuration, Marposs measuring/process monitoring, AE gap crash monitoring, grinding wheel balancing system, workpiece spindle, tailstock, external and internal cylindrical grinding capabilities, and automatic workpiece handling. The machines are designed for medium to large-sized workpieces. According to the PROFLEX C3 parameters, the maximum grinding diameter is up to 600 mm, the maximum workpiece weight between centers is up to 400 kg, the distance between centers is 800 – 2,100 mm, and the maximum grinding length is 400 – 1,600 mm. Clean note in the offer:

Condition: used, Wolfking C 250 UNI Meat Grinder The Wolfking C 250 UNI is an industrial high-efficiency grinder designed for processing frozen, fresh, and cooked products. The hopper has a large capacity of 300 L, allowing standard meat bins to be unloaded directly into the machine with ease. Pgjdpfezcrihox Ag Ten This meat grinder is suitable for medium and large-scale processing companies. It is an ideal machine for processing meat, game, poultry, fish, vegetables, pet food, baby food, plant-based products, and fruit. The grinder is constructed entirely from stainless steel, ensuring durability and compliance with strict hygiene standards. Technical Specifications - Production capacity: up to 8,000 kg/h (depending on product type and cutting size) - Cutting system: Unger, 250 mm - Hopper capacity: 300 L - Infeed height: 1,540 mm - Discharge height: 780 mm - Voltage: 400 V (3+N, 50 Hz) - Power: 37 kW - Weight: 1,282 kg - Machine dimensions (W × D × H): 1,270 × 1,750 × 1,540 mm

Condition: new, Year of construction: 2026, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, Pgedpfozfiq Hox Ag Tjn YOUR competent partner when it comes to BENDING BENCHES Folding bench ZGR2000/0,8L from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: -Working width 2140mm - Sheet metal thickness up to 0.8mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 160° -Bending beam: 15 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop -Weight about 175kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT. Self pickup Certificate CE Guarantee: 12 months. Self pickup

Condition: used, maximum load weight: 33,870 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 12/2024, next inspection (TÜV): 12/2026, total width: 2,550 mm, total height: 2,635 mm, Equipment: ABS, crane, DIMENSIONS AND WEIGHTS ? Chassis length 13,300 + 200 mm ? Loading area length 13,500 mm ? Loading area width 2,475 mm ? Overall width 2,550 mm ? Loading height approx. 1,435 mm ? Overall height approx. 4,000 mm ? Front overhang 1,200 mm ? Rear overhang 3,800 mm ? Wheelbase 8,000 mm ? Axle distance 2,020 mm ? Fifth wheel height 270 mm ? Saddle coupling height 1,165 mm ? Saddle load 15,000 kg ? Total axle load 27,000 kg ? Permissible total weight 42,000 kg CHASSIS FRAME ? Flat frame with two longitudinal beams made of I-profile ? Through-bolted cross members at a distance of approx. 550 mm ? Longitudinal beams also designed as crane guide rails ? Crane guide rail width 1,300 mm ? Suitable for a swiveling loading crane up to 16 tm ? U-profile edge 140 x 100 x 4 mm with V-groove ? Fixed access ramps for crane up to 16 tm ? Ramp length approx. 350 mm ? Rear overhang without wooden floor ? Stainless steel transverse end member at the rear ? Demountable light bar ? Fixed steel bumper FLOOR ? TÜV-certified floor across the entire loading area ? 4 mm steel floor between the longitudinal beams ? Steel floor also continuous in the middle area SIDE BOARDS ? 2 x 5 folding and removable aluminum side boards ? Side board height approx. 1,000 mm ? Design with 3 hinges per side board ? Kinnegrip uprights in aluminum design K20 ? Aluminum divider board ? 4 x 2 upright pockets ? 2 insertion uprights LOAD SECUREMENT ? 29 lashing eyes with a load capacity of 2.5 t each ? Additional 2.5 t lashing options in the V-groove ? TÜV-certified load securing system ? Maximum number of lashing points integrated into the outer frame Pgjdpszftf Uofx Ag Ten LIGHTING AND ELECTRICAL SYSTEM ? 24 Volt electrical system ? 7-pole ISO-N socket ? 7-pole ISO-S socket ? 15-pole ISO socket ? EBS connection ISO 7638 + 24N ? Intertruck Flatline LED taillights ? LED fog light ? 2 LED work lights on the support legs ? 2 LED work lights between axle 2 and 3 ? 2 LED reversing and work lights at the rear ? 5 yellow LED side marker lights per side ? LED outline lights at the rear ? LED outline lights at the front ? LED license plate light ? Reflector strips on the sides and at the rear according to EC SUSPENSION ? 3 axles ? Air suspension ? Disc brakes ? ABS ? EBS ? Steered axle version ACCESSORIES ? Plastic license plate holder ? Underrun protection according to EC directives ? Fixed access steps at the rear left and right ? Access rungs ? Aluminum air reservoir ? Chock with holder on the support legs ? Wide Wiese mudguards ? TÜV certificates for body and floor CRANE PREPARATION ? Prepared for Kennis R16/71-3 New ? Swiveling truck-mounted loading crane ? Crane guide integrated into the chassis ? Delivery without loading crane Painting: ? Chassis RAL 9005 Deep Black ? Edge profile RAL 9005 Deep Black ? Front panel RAL 9005 Deep Black ? Bumper RAL 9005 Deep Black ? Axles and hubs black ? Steel rims standard color ? Light bar hot-dip galvanized and painted white ? Steering rod and turntable galvanized ? Side boards anodized ? Underrun protection aluminum-colored SCOPE OF DELIVERY ? TÜV certificates for body and floor ? Complete crane preparation for Kennis R16/71-3 New ? Delivery without loading crane

Condition: excellent (used), Working travels 450 x 260 x 560 mm Spindle stroke 120 mm cross table 770 x 320 mm Drilling capacity 25 mm Spindle speeds 55 - 9200 Rpm With DRO With Threading attachement Pgsdpfx Aotpgcneg Ton Misc accessories MARCELS MASCHINEN CH

Condition: excellent (used), Drilling capacity -20 mm Spindle taper FEHLMANN Spindle speeds 50-6300 rpm Throat 276 mm Pgodpouy Sazjfx Ag Ton Cross table 530 x 255 mm Digital read-out Accessories MARCELS MASCHINEN CH

Condition: good (used), functionality: fully functional, Year of construction: 2010, load capacity: 200 kg, mast type: other, lifting height: 3,800 mm, platform width: 780 mm, overall weight: 630 kg, empty load weight: 630 kg, transport length: 1,200 mm, transport width: 780 mm, transport height: 1,750 mm, next inspection (TÜV): 06/2027, tire condition: 90 %, Equipment: UVV, We offer you: Aichi RM04B tracked aerial work platform Year of manufacture: 2010 Weight: 630 kg Load capacity: 200 kg L x W x H: 1.25 x 0.80 x 1.74 meters Lifting height: 3.80 meters Working height: 5.80 meters Robust tracked chassis Non-marking tracks Off-road tracked aerial work platform, capable of handling slopes up to 25% Can overcome ground obstacles Also suitable for work on uneven ground Excellent traction enhances ground grip Highly maneuverable in confined spaces For indoor and outdoor work Operates entirely on electricity Emission-free operation Inspection valid until 06/2027 Tracks in like-new condition Upon request, available with new batteries for an additional charge Pgjdpfx Ajzdx H Uog Ton The machines are completely inspected and refurbished by us Spare parts available Six months warranty This advertisement does not constitute a binding offer; it serves only as an illustration. All information is provided to the best of our knowledge. Errors, typos, and prior sale are subject to change. You will receive an invoice with VAT stated. Shipping is possible for an additional charge. If you have any further questions, please do not hesitate to call us. Sincerely, K.u.K. Maschinen GmbH

Condition: excellent (used), Gea combiGrind 200 frozen block grinder. In lovely condition. Has been fully checked over. stainless steel worms. Pgsdpfxoy U Hrie Ag Ten

Condition: good (used), Year of construction: 2000, operating hours: 5,006 h, fuel type: diesel, GENIE S-45 Telescopic boom lift / aerial work platform 4x4 DEUTZ DIESEL 15m working height, 300cm work platform A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can arrange a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland Pgedpozcxw Sefx Ag Ten

Condition: used, 10 containers dedicated to hydrogen testing L 6058 x W 2438 x H 2896 mm Ready to be connected to cooling/electrical/H2-N2 systems Cooling capacity: 100 kW Electrical capacity: 40 kW (can be increased to 100 kW) Podpfxszgv Rvj Ag Togn Bench automation software provided (Horiba STARS) Durability testing Characterization testing EU declaration of conformity available

Condition: used, Year of construction: 2023, functionality: fully functional, roll width: 465 mm, total width: 540 mm, total length: 3,250 mm, conveying length: 3,250 mm, power: 0.37 kW (0.50 HP), axle spacing: 125 mm, frame height: 120 mm, frame width: 35 mm, Powered Roller Conveyor / Work Table / Conveyor Technology Model: Flat Belt Condition: Used Year of manufacture: 2013 Manufacturer: AMI Fördertechnik Total length: approx. 3,250 mm Total width: approx. 540 mm Conveyor width: approx. 465 mm Roller/shaft pitch: approx. 125 mm Steel frame Frame height: approx. 120 mm Frame width: approx. 35 mm Color: Light grey Includes 2 SEW motors (0.37 kW) Includes side guides Feet must be ordered separately Available stock: 10 units Price per unit Podpfsylmi Usx Ag Tsgn Internal item number: 2026021902 Features: Condition: fully functional, with signs of use Ideal for fast material handling Professionally dismantled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was operational up until dismantling. Thanks to the excellent craftsmanship of the conveyor technology, your material glides smoothly to its destination—even under heavy loads. Tailor-made solutions for your intralogistics Whether roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods—we are your competent partner! We are happy to provide you with a customized quote or advise you on design and installation questions. Simply inform us of your requirements and local conditions. Benefit from our many years of experience and outstanding network of industry professionals. We have successfully realized projects for companies in a wide range of industries, such as logistics, pharmaceuticals, crafts, and electronics. Together we will find ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automated sorting technology or additional components such as picking shelves or containers.

Condition: new, Year of construction: 2026, total length: 6,100 mm, Articulated telescopic work platform Podezfq Dbopfx Ag Tjgn Manitou 150 AETJC Drive Electric Year built 2026 Work height (mm) 15,000

Condition: used, Year of construction: 2025, total length: 20,590 mm, - Arbeitshöhe max. 43,15m - Plattformhöhe max. 41,15m - Seitliche Reichweite max. 27,43m - Reichweite unter Nullniveau 6,00m - Tragfähigkeit – unbegrenzt 300 kg - Tragfähigkeit – begrenzt 454 kg - Max. Personen auf der Plattform (begr./unbegr. Reichw.) 3/2 - Plattformschwenkbereich 160° - Länge Korbarm 5,48/9,14m - Vertikaler Korbarm-Schwenkbereich 130° - Oberwagen-Schwenkbereich 360° - Seitlicher Überhang (Achsen eingefahren) 1,14m - Seitlicher Überhang (Achsen ausgefahren) 1,70m - Fahrgeschwindigkeit – eingefahren 4,3 km/h - Fahrgeschwindigkeit – angehoben 0,65 km/h - Steigfähigkeit – eingefahren(2) 35% - Neigungssensor-Aktivierung (Längsachse/Querachse) 4,5° / 4,5° Psdpfx Aozfq A Deg Tsgn - Wenderadius – innen/außen (Achsen eingefahren) 8,03m/ 9,96m - Wenderadius – innen/außen (Achsen ausgefahren) 2,90m/ 6,17m - Reifen 445D50/710 - Antriebsart Diesel - Hydrauliktankinhalt 227 L - Kraftstofftankinhalt 151 L - Geräusch-/Schalldruckpegel (Boden) 91 dBA - Geräusch-/Schalldruckpegel (Plattform) 75 dBA - Vibrationen < 2,5m/s - Reifenkontaktdruck 896 kPa

Condition: used, Year of construction: 2025, total length: 20,590 mm, - Arbeitshöhe max. 43,15m - Plattformhöhe max. 41,15m - Seitliche Reichweite max. 27,43m - Reichweite unter Nullniveau 6,00m - Tragfähigkeit – unbegrenzt 300 kg - Tragfähigkeit – begrenzt 454 kg - Max. Personen auf der Plattform (begr./unbegr. Reichw.) 3/2 - Plattformschwenkbereich 160° - Länge Korbarm 5,48/9,14m - Vertikaler Korbarm-Schwenkbereich 130° - Oberwagen-Schwenkbereich 360° - Seitlicher Überhang (Achsen eingefahren) 1,14m - Seitlicher Überhang (Achsen ausgefahren) 1,70m - Fahrgeschwindigkeit – eingefahren 4,3 km/h - Fahrgeschwindigkeit – angehoben 0,65 km/h - Steigfähigkeit – eingefahren(2) 35% - Neigungssensor-Aktivierung (Längsachse/Querachse) 4,5° / 4,5° - Wenderadius – innen/außen (Achsen eingefahren) 8,03m/ 9,96m - Wenderadius – innen/außen (Achsen ausgefahren) 2,90m/ 6,17m - Reifen 445D50/710 - Antriebsart Diesel - Hydrauliktankinhalt 227 L - Kraftstofftankinhalt 151 L - Geräusch-/Schalldruckpegel (Boden) 91 dBA - Geräusch-/Schalldruckpegel (Plattform) 75 dBA Pgsdpfx Aezfq Aweg Ten - Vibrationen < 2,5m/s - Reifenkontaktdruck 896 kPa

Condition: new, length 2000 mm width 700 mm work height max. 900 mm dimensions of the machine ca. 2,0 x 0,7 x 0,9 m weight 130 kg Pgodezafm Uspfx Ag Ten Workbench - Made in Germany Industrial quality, particularly robust and durable design for the highest demands! demands! Workbench top 45 mm thick made of high-quality multiplex beech

Condition: new, length 2000 mm Podpfxjzafm Io Ag Togn width 700 mm work height max. 900 mm dimensions of the machine ca. 2,0 x 0,7 x 0,9 m weight 160 kg Workbench - Made in Germany Industrial quality, particularly robust and durable design for the highest demands! demands! Workbench top 45 mm thick made of high-quality multiplex beech Drawers 1 piece left 1 piece right Cladding right, left rear

Condition: good (used), Year of construction: 2009, fuel type: electric, Genie Z45/25DC Articulating Boom Lift / Work Platform, 16m working height, Electric, 2009. A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can schedule a viewing and/or test drive free of charge. Please call in advance, as we are not always present. Van de Wert Trading B.V. Pgodpfxszcuq Ie Ag Tjn Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 2020, condition: ready for operation (used), A fully automatic Cleveland CNC cut-off and face grinding machine for carbide and HSS bars is available. Grinding spindle speed: 2000rpm, max. cut-off wheel diameter: 200mm, workpiece diameter range: 3mm-32mm, max. workpiece length: 500mm, length accuracy: +/-0.02mm, face runout accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 1900mm/1200mm/2400mm, weight: approx. 1700kg. Documentation available. An on-site inspection is possible. Pgjdpszhb Dkofx Ag Tsn