Used Work Spindle for sale (51,550)

Condition: good (used), Year of construction: 2021, functionality: fully functional, Minimax cu 410es F 26 TERSA Combination Machine * Ø 350 mm main saw blade with max. cutting height of 118 mm, achievable even with scoring blade installed * Saw assembly with permanently precise dual pivot segment guide * Scoring unit with separate motor and Ø 120 mm blade, easily adjustable from outside * High-precision format sliding table made of anodized aluminum on hardened and crimped steel guide rails * Smooth-running, high-precision anodized aluminum sliding table with proven, permanently smooth-running ball contact system on hardened and crimped steel rails * Large crosscut frame (1200 x 650 mm) with roller and extendable aluminum telescopic fence, up to 3300 mm * Saw unit tiltable from 90° to -45° * Tiltable spindle moulder from 90° to -45° backwards into the moulder fence * Four spindle speeds * Spindle reversible (right/left rotation) * Quick change to thickness planing thanks to parallel-opening planer tables * 2-speed feed on thickness planer table * Helical steel infeed roller for consistent wood feed * Three independent industrial motors * With separate rip fence and separate jointer fence * Main switch lockable * Motor equipped with protective switch * Weight: approx. 1300 kg * Surface Planer Planer table width: 410 mm Planer table length: 2200 mm Max. depth of cut: 5 mm * Extraction Connection Saw blade guard extraction port diameter: 60 mm Number of extraction ports: 3 Extraction port diameter: 120 mm * Thickness Planer Table length: 775 mm Table width: 410 mm Min. working height: 3 mm Max. working height: 240 mm Max. depth of cut: 5 mm * Electrical Data Number of motors: 3 Main drive motor power: 5 kW Scoring saw motor power: 0.55 kW Voltage: 400 V Mains frequency: 50 Hz * Spindle Moulder Tilting range: 0 – 45° Spindle diameter: 30 mm Usable spindle length: 125 mm Speeds: 3500 / 6000 / 8000 / 10000 rpm * Max. cutter diameter lowered: 240 mm tenoning: 320 mm * Planer Cutterhead Type: TERSA Diameter: 95 mm Number of knives: 4 pcs Speed: 5000 rpm * Circular Saw Unit Nwsdjyz Sdwspfx Anfsf Crosscut capacity: 2600 mm Rip capacity with fence: 1000 mm Max. crosscut width left of blade: 3300 mm Sawblade tilt: 90 – 45° Max. cutting height at 90°: 104 mm Max. cutting height at 45°: 68 mm Max. blade projection at 90°: 118 mm Max. blade projection at 45°: 84 mm (Main) saw blade diameter: 350 mm (Main) saw blade diameter with scorer: see above (Main) saw blade speed: 4200 rpm * Sliding Table and Work Table Sliding table length: 2660 mm Sliding table width: 360 mm Sliding table height: 142 mm Table length: 1250 mm Table width: 430 mm Table height: 900 mm * Feed Speed range: 6 – 12 m/min Transport available at extra cost.

Condition: used, maximum load weight: 2,150 kg, overall weight: 3,500 kg, axle configuration: 3 axles, first registration: 02/2022, total width: 2,150 mm, total height: 890 mm, Temared trailer Winch 3 axles First registration / Year of manufacture: 17.02.2022 / Vehicle type: Semi-trailer Body type: Platform KBA No. (HSN/ TSN): 1897//000 Paint color: Silver Number of previous owners: 1---- Nwodpfxoy Dyz Aj Anfjf The vehicle is unprepared! Nationwide delivery available for an additional charge. Errors and prior sale reserved. We are happy to take your vehicle in part exchange. Financing / leasing also available with no down payment! Do you have questions? We are happy to advise you!

Condition: new, maximum load weight: 15,825 kg, overall weight: 20,500 kg, axle configuration: 2 axles, loading space width: 2,480 mm, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and soon-available vehicles, on our website. Excerpt from the equipment list. Full specifications available upon request. Chassis: * Steel-welded construction with welded longitudinal beams and through Z-cross members, close cross member spacing for high floor load capacity * Ramp storage between longitudinal beams behind the axle assembly under the loading floor. Two insertion pockets for one ramp each, with closure plate on the rear headframe Underride protection: * According to EU regulations Landing legs (front): * Landing legs with single-side operation Support (rear): * Two adjustable drop supports Axles: * 2 x 10 t air suspension axle units, manufacturer SAF, drum brakes approx. 300 x 200 mm, centered wheel mounting for twin tires, ABS, total air suspension stroke approx. 200 mm (lift approx. 140 mm, lower approx. 60 mm), control via hand lever with latch function Tyres: * 8x, 235/75R 17.5 – manufacturer of our choice, on steel rims 6.75 x 17.5, mounted with ET Spray protection: * Made of PVC in front of and behind the axles, according to EU regulations Load securing: * Outer frame with one hole every approx. 150 mm for tension straps, lashing force approx. 2.5 t (lashing straps can be fastened with sideboards closed, chamfered outer frame) * 6 pairs of foldable lashing rings, evenly spaced, tensile force approx. 8 t. * Stake pockets for removable stanchions 80/50: 3 pairs in the outer frame, evenly distributed Brake system: * Compressed air brake system in accordance with EU regulations with EBS * Two coils as a connection to the truck with red/yellow coupling heads * Spring-actuated parking brake acting on one axle Floor: * Approx. 28 mm Z-hardwood floor, recessed in the outer frame Front wall: * Removable from 25 mm high sideboard Lighting system: Nwsdpfxjy Auhbo Anfjf * Lighting equipment in accordance with EU regulations, 24 volts, multi-chamber rear lights, license plate lights, side marker lamps, and tail marking lights at the rear. Connection panel on the left of the towing bar, including connection cable with 15-pin and 2 x 7-pin plugs Accessories: * 2 wheel chocks with holders * Plug-in beacon at the rear * Additional 40 mm drawbar coupling (max. gross weight 13,500 kg) * Rear extension by approx. 800 mm incl. underride protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically length-adjustable rigid drawbar, 6 x approx. 100 mm increments, with bolted towing eye approx. 50 mm as per DIN 74053 * 4 rows of stake pockets across the loading area, evenly distributed * 12 removable stanchions made of galvanized tube, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1x20’ container * 1 x 20’ extendable to approx. 2,820 mm, according to ISO 1496, EN 284, or EN 452 * 1 pair aluminum loading ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles * 6 x 25 mm sideboards and rear wall made of anodized aluminum hollow profiles, approx. 600 mm high, foldable and removable, removable Kinnegrip stanchions (internal width approx. 2,480 mm), including sideboard storage at the front near the headboard Paintwork: * Chassis shot-blasted, cleaned and premium hot-dip galvanized according to latest technology * Body components cleaned, primed and hot-dip galvanized * Chassis: hot-dip galvanized + RAL 3002 carmine red * Sideboards: RAL 3002 carmine red * Kinnegrip stanc

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Chassis: * Welded construction made from high-quality steel profiles with thru-profile cross members. Designed for high point loads. Coupling device: * Fifth wheel plate with 2-inch kingpin Underrun protection: * According to EC regulations, bolted design Side guard: * According to EC regulations Landing legs: * 2 x 12 t landing legs with compensation foot and single-sided operation on the right in direction of travel Axles: * 3 x 9 t air suspension axle assembly, SAF brand, with disc brakes approx. 430 x 45 mm, wheel fixing mid-centered ET120, ABS, total air suspension lift approx. 180 mm, of which lift approx. 110 mm and lower approx. 70 mm * Air suspension operated via hand control valve with stop function Nedpey Auhzsfx Anfewf Steering: * Last axle forcibly steered by linkage Axle lift: * First axle liftable, with fully automatic, load-dependent lift control Brake system: * Two-line compressed air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, anti-mix couplings fixed to front cross member, without connecting line to motor vehicle * Wabco brand Tyres: * Sixfold, 385/65 R22.5 160J on rim 11.75 x 22.5 ET 120 - brand at our discretion. Incl. tire pressure monitoring system, tire pressure display in cab (pre-installed by chassis manufacturer) Mudguards: * According to EC regulations, 1/4 PVC mudguards in front of and behind axle assembly Load securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t) * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t) * Drilled holes in outer frame every approx. 500 mm for lashing straps (straps can be hooked in with closed drop sides, beveled outer frame) Stake pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * Plug-in stakes: 20 galvanised tubular stakes approx. 80/50 mm, total length approx. 1,000 mm * Magazine for 20 plug-in stakes on the inside of the front wall Front bulkhead: * Reinforced steel bulkhead, fixed, interior covered with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor, recessed into the outer frame Side walls: * 4 x 250 mm side walls and rear wall made of anodised aluminium hollow sections, foldable and removable, removable Kinnegrip stakes * Side wall and stake magazine under the chassis * Left and right insertion rails for side walls and stakes Lighting system: * According to EC regulations, 24 Volt with multi-chamber lights, LED side marker lights, LED position lights front white, LED outline marker lights at rear, license plate lights * 1x 15-pin and 2x 7-pin plug sockets on front cross member Equipment: * Two wheel chocks with holders * Warning signs according to ECE 70 * Work spotlight on lamp bracket (operated via reverse gear) * Holder for rotating beacon at rear, incl. beacon * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm Paintwork: * Chassis and front bulkhead sandblasted, primed and coated in a single colour * Chassis: hot-dip galvanised + RAL colour of choice * Front bulkhead: RAL colour of choice * Side walls: anodised aluminium * Top stakes front bulkhead: hot-dip galvanised * Hubs: KTL blac

Condition: new, maximum load weight: 38,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, Our complete vehicle inventory, including immediately and shortly available vehicles, can be found on our website. Selection of features. Complete equipment details upon request. EQUIPMENT: * Gooseneck, length approx. 4,100 mm, with central beam * Extendable load area, length approx. 9,400 mm, with 350 mm x 10° rear bevel and integrated hook-in rail for use with separate aluminum loading ramps * Pneumatic locking system with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the selected platform length * Technical fifth wheel load: 18,000 kg * Suitable for tractor units: 4 x 2 and 6 x 2 * TPMS Tire Pressure Monitoring System in accordance with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced steered, mounted on turntables * Technical axle load: 12,000 kg per axle * Air suspension with lift/lower valve * 235/75 R 17.5 3PMSF twin tires, manufacturer of our choice * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic operations (without supply connections installation on the tractor unit) * 4 pairs of recessed lashing rings in the outer frame of the gooseneck: - The first three pairs are flat (LC 10,000 daN) - The rear pair is fold-out (LC 10,000 daN) * 4 pairs of stake pockets recessed in the outer frame of the gooseneck for plug-in stakes approx. 100 x 50 mm * 2-inch king pin * Mechanical landing legs with 2-speed gearbox and crank; JOST Modul B, static test load approx. 50,000 kg * Wooden flooring approx. 32 mm thick, framed in aluminum omega profiles on the gooseneck and platform * 10 pairs of recessed, flat-mounted, foldable lashing rings in the outer frame of the load area * One pair of lashing rings (LC 10,000 daN) in front of the last axle and at the end crossmember of the trailer * All other lashing rings (LC 5,000 daN) * 6 pairs of stake pockets recessed in the outer frame of the load area for plug-in stakes approx. 100 x 50 mm * 1 spare wheel holder under the load area, right side when facing forward * 1 lockable stainless steel (INOX) toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load area on the left when facing forward * Rear crossmember with bevel approx. 350 mm x 10° * Integrated hook-in rail for loose aluminum loading ramps at the rear crossmember Nwodpey Augdsfx Anfof * 1 pair of drop-down supports at the rear crossmember * Steering override from front and rear via cable remote control with single-track axle monitoring (no installation on tractor unit) * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) * 1 LED work light on both left and right of front bulkhead, wired to the tractor unit’s connection rail * Locking positions at each 500 mm on the extension * Internal holder for stakes not in use, mounted to the inside of the gooseneck bulkhead * 4 wheel chocks with holder under the load bed * Galvanised extension sections for platform widening by approx. 230 mm per side (without wooden planks) * 1 LED work light on both left and right in front of the axles, wired to the connection rail for the tractor unit * 2 axle load gauges mounted on the left side, including axle load diagram * 1st axle with traction aid * Mountings for warning signs under the gooseneck as well as left and right at the rear crossmember * Acoustic warning signal when reversing * EU reflector at the rear of the vehicle

Condition: new, maximum load weight: 16,180 kg, overall weight: 20,500 kg, axle configuration: 2 axles, total width: 2,480 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Below is an excerpt from the equipment. Full specification available upon request. Chassis: * Steel welded construction made of welded longitudinal beams and punched-through Z cross members; close cross member spacing for high floor load capacity * Ramp holder: Between the longitudinal beams, behind the axle assembly, under the loading floor, two slide-in pockets for loading ramps (one per pocket), with cover plate in the rear head frame Underrun protection: * In accordance with EU regulations Landing legs: * Front: landing legs with single-sided operation * Rear support: two adjustable drop legs Axles: * 2 x 10 t air suspension axle assemblies, brand SAF, approx. 300 x 200mm drum brakes, center-bored for twin tires, ABS, total air suspension lift approx. 200mm (of which raise approx. 140mm, lower approx. 60mm), manual lever control with detent function Tyres: * 8 units, 235/75 R17.5 - brand of our choice. Mounted on 6.75x17.5 rims with offset Splash guards: * PVC splash guards in front of and behind the axles as per EU regulations Load securing: * On the outer frame, boreholes for lashing straps at approx. every 150 mm, lashing capacity approx. 2.5 t * 6 pairs of folding lashing rings evenly distributed, lashing capacity approx. 8 t * Stake pockets for 80/50 insert stakes: 3 pairs on the outer frame, evenly distributed Brake system: * Compressed air brake system according to EU regulations with EBS * Two coils as coupling to the truck, red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm Z hardwood floor recessed into the outer frame Lighting system: * Lighting system according to EU standards, 24 Volt, multi-chamber rear lights, license plate lights, side marker and lane departure lights at the rear, connection plate left at the drawbar, including connecting cable with 15-pin and 2 x 7-pin connectors Nedpjy Auf Tofx Anfswf Accessories: * 2 wheel chocks with holders * Detachable flashing beacon at the rear * 40 mm towing device supplied (GVW max. 13,500 kg) * Rear extension approx. 800 mm including underrun protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable rigid drawbar in length, 6 x approx. 100 mm increments, with bolted 50 mm towing eye per DIN 74053 * 4 rows of stake pockets across the loading area, evenly distributed * 12 galvanized pipe insert stakes, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1 x 20' container * Container locks 1 x 20' extendable to approx. 2,820 mm, compliant with ISO 1496, EN 284 or EN 452 * 1 pair of aluminum loading ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles Paintwork: * Chassis shot-blasted, cleaned, and high-quality hot-dip galvanized to the latest technological standard * Body components cleaned, primed, and hot-dip galvanized * Chassis: hot-dip galvanized + RAL 9011 graphite black * Outer frame: hot-dip galvanized + RAL 9010 pure white * Hubs: KTL black * Underrun protection: RAL 9010 pure white * Rims: RAL 9006 silver * Fittings: galvanized / KTL black

Condition: used, mileage: 84,553 km, power: 90 kW (122.37 HP), first registration: 07/2013, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 03/2027, color: yellow, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,740 mm, total width: 2,220 mm, total height: 2,915 mm, Equipment: ABS, crane, soot filter, Renault 120 DXI Palfinger Steiger P260B 4x2 Self-propelled work platform Suspension: leaf spring Wheelbase: 3.90 m PALFINGER Type: P260B Year: 2013 4x hydraulic extension Nwsdpfx Anoy Aqf Nsfef 4x hydraulic outriggers 2x work baskets + emergency controls Equipment: - 3 seats - Radio-CD-DVD-AV-USB - Electric windows We are happy to assist you with financing/leasing through our partners. All information is provided without guarantee. Subject to errors and prior sale.

Condition: used, functionality: fully functional, Year of construction: 2008, machine/vehicle number: 04 18750, load capacity: 200 kg, overall weight: 1,400 kg, empty load weight: 1,400 kg, For sale is a reliable Nifty 120 T trailer-mounted boom lift from the year 2008, in good, well-maintained condition. Ideal for working at height such as tree trimming, roof work, façade cleaning, or installations. Technical specifications: - Working height: approx. 12.2 m - Lateral outreach: approx. 6.1 m - Year of manufacture: 2008 Nodpfx Anoy Amfxsfowf - Power source: Battery + 230V mains (hybrid) - Own weight: approx. 1,400 kg - Platform capacity: approx. 200 kg Condition & Features: - Fully functional and ready for immediate use - Simple controls from both basket and ground - Hydraulic outriggers ensure stable support - Compact design – ideal for confined work sites - Normal signs of use consistent with age Advantages: - Flexible operation thanks to hybrid drive (indoors & outdoors) - No additional generator required - Easy to transport (suitable for cars with appropriate towing capacity) Price: €12,500 gross (Export: €10,504.20 net) Viewing and test run available by appointment. If you have any questions, please feel free to contact us.

Condition: used, first registration: 03/2002, next inspection (TÜV): 03/2027, Equipment: ABS, Export only Sale only abroad SPR 324 Kotschenreuther Nsdpfxsy Dmq Do Anfewf 3 axles

Year of construction: 2001, condition: excellent (used), machine/vehicle number: PB 04 02.01/1070, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Nwedjidqtlspfx Anfjf

Condition: excellent (used), machine/vehicle number: 85039, Model: 371 Equipment / Additional information: Ø max. 15 mm Nodpfxeth U E Eo Anfewf Distance between drills: 60-120 mm

Condition: excellent (used), machine/vehicle number: 70218, Equipment / Additional information: Various tools Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Nsdpfx Aspithaenfewf

Year of construction: 1986, condition: excellent (used), machine/vehicle number: 1767, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Nodpfjpitfxox Anfjwf

Condition: used, Motor output 5,9 kW Spindle diameter 30 mm reus 3000 / 4500 / 6000 / 9000 U/min Nsdpoyrhv Njfx Anfjwf Panhans Type 259 swivel spindle milling machine or table milling machine for precise milling, profiling, and rebating of solid wood and wood-based materials. The machine has a swiveling milling spindle, enabling versatile machining at different angles. Ideal for carpentry, furniture making, and interior design. Includes Haffner feed device.

Condition: used, machine/vehicle number: 8308, mileage: 191,919 km, power: 158 kW (214.82 HP), first registration: 04/2018, fuel type: diesel, overall weight: 11,990 kg, tire size: 245/70R17.5, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Equipment: air conditioning, airbag, central locking, differential lock, electric window regulation, onboard computer, power assisted steering, Special features - Electric windows - Radio - ABS / ASR - Rearview camera - Differential lock - Air conditioning - Power steering - Central locking - Fog lights - Air-suspended driver’s seat Superstructure France Elevateur 192 CPM Aerial Working Platform Njdpfx Aoy Av N Tsnfowf - Working height: 19 m - Lateral outreach without outriggers: 7.5 m - Lateral outreach with outriggers: 11.8 m - Basket load: 265 kg / 2 persons With 220V power socket With compressed air connection 2 water connections: one with 24V electric pump, 2.7 bar; the other a high-pressure connection with petrol-powered pump, 200 bar. - Tower rotation: 400° - 4 hydraulic outriggers and 2 hydraulic rear axle stabilizers - Maximum operating inclination (slope): 5% - Maximum lateral inclination: 15% - Fully insulated fiberglass basket (1000 V) - Steel boom with 2 telescopic sections - Articulated pendulum arm 180° - Emergency operation (remote control) in the cabin - Inclination alarm (tilt sensor) - Basket rotation: 2 x 90° - Operating hours counter - Emergency pump Body features - Tool shelves - Stainless steel water tank 200l - Sine wave inverter 2500VA - Quick coupling for compressed air - Vice - 220V socket Renault D12 with France Elevateur 192 CPM aerial platform, mounted on a 12-ton truck, suitable among others for the facade cleaning industry. The basket is equipped with a high-pressure water pump, petrol-engine driven, 200 bar, as well as a second water connection with 24V electric pump, 2.7 bar. There is also a compressed air connection in the basket. All functions of the aerial platform are fully operational and have been checked by our workshop. The vehicle is ready for registration. German paperwork, TÜV, and UVV certificates are included free of charge. Additional features such as trailer hitch, lighting, shelving, and more are available upon request. ACR-Juretzki Nutzfahrzeughandels GmbH – your reliable partner for used commercial vehicles All vehicles we offer are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. Presentation is exclusively with original photos, taken directly at our premises – ensuring full transparency regarding the actual condition of the vehicle. Prior to sale, our vehicles receive comprehensive preparation in our in-house specialist workshop – including mechanical, body, and paint work. This ensures they are optimally prepared for the next technical inspection. We also guarantee the authenticity of indicated mileage. Trust is good – inspection is better: On request, the vehicle can be inspected by independent organizations such as TÜV, DEKRA, or KÜS – also available as remote inspection. Our range of services for you: - Delivery of your vehicle to your chosen location - Complete processing of export formalities, incl. export license plates - Individual financing and leasing offers - Trade-in of your current vehicle - Installation of special equipment as required Looking for something specific? If you currently cannot find a suitable vehicle for your business in our inventory, please contact us – we are happy to assist you.

Condition: used, Year of construction: 2017, operating hours: 943 h, machine/vehicle number: 28 36741, fuel type: hybrid, Weights Empty weight: 14.520 kg Functional Mast: articulated arm Lifting capacity: 280 kg Working height: 2.800 cm Nwjdpfx Ansyiydasfof Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Outrigger Max. horizontal reach: 1900 m Transport dimensions (LxWxH): 9.28x2.49x2.7 Additional information Please contact PFEIFER GROUP for more information

Year of construction: 2023, condition: like new (used), functionality: fully functional, Worktable AT 2000 with beechwood top and drawers Mobile baker's table Beechwood worktop with rear gallery Drawer unit on the left Two storage shelves on the right Stainless steel construction Nedpfx Anjxvkxyefswf Approximate dimensions: 2000 x 800 x 980 mm (W x D x H) Used machine, cleaned Options: Delivery service New castors/wheels

Condition: excellent (used), Year of construction: 2002, RAS Multibend-Center RAS 79.26 Year 2002 Used RAS Multibend Centre CNC Folder Max working 2560mm Max sheet thickness (mild steel) 2.0 (2.5mm) Max sheet thickness (stainless steel) 1.5mm Max sheet thickness (aluminium) 3mm Finished part length min. (w/o corner tools) 200/250mm Nwodpfx Asrxt Hqenfjf Finished part length (w. small corners) 380/430mm Finished part length min (w. large corners) 430mm / 480mm Finished part width min. (inside) 150 (140mm) Finished four sided part height max 203mm Side free space corner tools (small/large) 30/ 50mm Folding beam travel range 180 Deg Working height 1000mm Machine width 7700mm Machine length 5800mm Machine max height 2400mm Weight approx 17000kg Drive power 25kw

Condition: excellent (used), Year of construction: 2001, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, working width: 1,850 mm, working range: 1,850 mm, 1 Used Salvagnini cnc automatic panel bender for sale cnc folder P4.1812 Servo-controlled panel bender LS Upper bending blade LI Lower Bending blade MLA.ZR Manual length Adjustment of Blankholder CLA Long Tab Bending Unit HP12015 R81 Chiller Njdpfswb E Uvox Anfjwf Max. length at entrance: 1850mm. Max. width at entrance: 1500mm. Minimum length at entrance: 285mm. Minimum width at entrance: 190mm. Maximum diagonal: 2150mm. Maximum width at exit: 1500mm. Maximum reference dimension: 2000mm. Minimum sheet thickness: S min: 0,50mm. Maximum sheet thickness, Mild Steel (max. 410 N/mm2): Max: 2,00mm Maximum sheet thickness, Stainless steel (max. 600 N/mm2): Max. = 1.25mm Processing of pre-painted material Smax= 3,00mm. Maximum tool length for CLA option: 1000mm.

Condition: excellent (used), Year of construction: 2002, RAS Multibend Center 79.22 Automatic cnc FOLDER / Panel bender Year 2002 Specifications • Working Length: 2160 mm/ 7.09’ ft. • Maximum Sheet Metal Thickness: Steel – (400N/mm2) 2.0 mm • Maximum Sheet Metal Thickness: Stainless Steel – 1.5 mm • Maximum Sheet Metal Thickness: Aluminum – 3.0 mm • Maximum Development Sheet Width: 1500 mm/ 4.92’ ft. • Maximum Four-Sided Fold Height Max: 203 mm • Bending Blade Reach: 180 ° Degrees • Machine Width: 5500 mm approx./ 18.04’ ft. approx. Njdpforxt Axjx Anfewf • Machine Length: 7000 mm approx. / 22.97’ ft. approx. • Machine Height: 2500 mm/ 8.20’ ft. Power: 18 kW Frequency: 50hZ Pressure: 6 Bar Weight: 21,000 kg/ 46,297 lbs. approx.

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: 2467088, power: 48 kW (65.26 HP), load capacity: 230 kg, lifting height: 18,390 mm, platform length: 1,830 mm, platform width: 760 mm, overall weight: 7,350 kg, transport length: 10,150 mm, transport width: 2,420 mm, transport height: 2,740 mm, fuel type: electric, color: blue, Technical specifications Year of manufacture: 2007 Drive: Electric 48 kW Working height: 20.39 m Platform height: 18.39 m Njdpfx Aoyqzvgjnfewf Platform dimensions (L x W): 1.83 m x 0.76 m Overall dimensions (L x W x H): 10.15 m x 2.42 m x 2.54 m Lateral outreach: 13.54 m Slewing: 400° Load capacity: 230 kg Basket arm length: 1.24 m Travel speed: 4.8 km/h Weight: 7,350 kg Gradeability: max. 30% Fully functional, general signs of wear

Condition: used, functionality: fully functional, Year of construction: 2002, machine/vehicle number: 2465838, power: 36.4 kW (49.49 HP), load capacity: 230 kg, lifting height: 18,420 mm, platform length: 1,830 mm, platform width: 910 mm, overall weight: 10,620 kg, transport length: 8,980 mm, transport width: 2,490 mm, transport height: 2,550 mm, fuel type: electric, tire size: IN 355/55 D625, color: orange, Equipment: UVV, Technical data Year of manufacture: 2002 Drive: Bi-Energy Working height: 20.42 m Platform height: 18.42 m Platform dimensions (LxW): 0.76 x 1.83 m Working outreach: 13.54 m Weight: 10,150 kg Climbing ability: max. 30% Nwedpfx Aeyqyvrjnfjf UVV inspection: new Slew range: 180° Electric: 48V DC, Batteries: 8x6V Diesel engine: operational General signs of use

Condition: ready for operation (used), Lathe Fabr Takisava Type TAL 510 with lathe chuck + quick-change holder + center punch Nwodpsvyuuqjfx Anfjf

Condition: good (used), Year of construction: 1988, Lathe KMK 40 Speed 1800 rpm Turning length 1000 mm with 3 jaws 4 jaws Multix with 4 inserts Rotating center point Face plate Collet chuck with collet set Nsdsu Uh U Ispfx Anfjwf

Condition: good (used), Kern lathe D 23 V with Forkard lathe chuck Multifix B digital display Nwsdevl Ig Dspfx Anfjf