Used Workbench With Drawers for sale (1,685)

Condition: excellent (used), Interroll roller conveyor 0.99m with drive The Interroll roller conveyor element is in a very good condition. Furthermore, the roller conveyor has its own drive motor. Width: 400mm Length: 990mm Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! Psdpehvmi Tsfx Afhjgg International shipping costs on request!

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: Pgodpfx Afjmk S Slohsg 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: used, Roller conveyor with chain cross conveyor Can be used after resaw. - Electric motor: 1,1 kW Podpfx Aoi Sdk Ssfhogg - Electric motor: 0,75 kW - Electric motor: 1,1 kW

Condition: used, 35m3 heated tank with a connical bottom. The tank was used to store wine. The tanks have been lenghtened from 26m3 to 35m3. 3 units available. Pgsdpfeun Nvbox Afhog

Condition: ready for operation (used), Asahi - Seiki Manufacturing Co. Ltd. NSF-10 for producing extension / extended springs with english or german loops for wire diameters up to 1mm. Machine in very good condition, possible to buy with decoiler and setted for some springs. Pedjr Izikepfx Afhegg

Condition: used, Year of construction: 2006, BUSKRO BK700 printer. Psdpfoq T N T Tex Afhsgg System on MikroJet HVT305 vacum transport table and MikroJet MJ360 receiving table (no photo). Equipped with two print heads and MikroJet Type 6521 UV fusing system. Compose IQ software. Machine in working order in continuous operation. Inspection and testing possible. In addition, I attach for replacement: 2x set of conveyor belts and 3x UV lamps.

Condition: used, Log table with elevator and log scanner Rema Control Pgedpju Smq Sefx Afheg - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m - Rema Scanner - log infeed conveyor

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) Pgedpouzv Tzofx Afhjg guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm Pjdpexdmgvofx Afhogg CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Year of construction: 2007, condition: excellent (used), REF: MM5765 1 x Record Packaging Machinery flow wrapper with Domino V230i thermal transfer overprinter and infeed conveyor. Fitted with an adjustable folding box, this unit is suitable for wrapping a variety of products in printed or clear film. Model - Scorpion MD SP. Date of manufacture - 2007. Speed - between 20 to 120 packs/minute (depending on product size). Sealing jaws - 350mm long. Infeed conveyor - 185mm wide. Outfeed conveyor - 220mm wide. Previous use - for packing cereal bars and biscuits. Overall dimensions - 4670mm L x 1350mm W. Pjdpfxjukw Nbe Afhjgg

Condition: used, Year of construction: 2001, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, controller model: Fusion 640 M, total height: 3,050 mm, total length: 7,109 mm, total width: 7,805 mm, table width: 500 mm, table length: 500 mm, table load: 500 kg, rotational speed (min.): 35 rpm, rotational speed (max.): 15,000 rpm, overall weight: 11,600 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 15,000 rpm, Horizontal Machining Centre with Palletech CNC Control Mazatrol Fusion 640M Pallet table size 500 x 500 mm Pgjdpfx Asydd D Tefhjg Number of pallets 10x Table load 500 kg Movement X-axis 710 mm Movement Y-axis 610 mm Movement Z-axis 660 mm Table indexing 360 x 1° Spindle Taper DIN 69871A Spindle speed 35 - 15.000 R/min Magazin capacity 120 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, maximum load weight: 33,458 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 06/2012, next inspection (TÜV): 06/2026, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, total width: 2,600 mm, Year of construction: 2012, Information in German: Kühlgerät Marke: Thermo King Weitere Informationen: * Leergewicht: 8.542 kg * Typ | Erste Achse: Michelin * Reifengröße | Erste Achse: 385/65 R22.5 * Reifenprofiltiefe innen links | Erste Achse: 60% * Reifenprofiltiefe innen rechts | Erste Achse: 60% * Maximale Achslast | Erste Achse: 9.000 kg * Typ | Zweite Achse: Michelin * Typ | Dritte Achse: Michelin * Reifengröße | Zweite Achse: 385/65 R22.5 * Reifengröße | Dritte Achse: 385/65 R22.5 Psdpjydt Unefx Afhjgg * Reifenprofiltiefe innen links | Zweite Achse: 60% * Reifenprofiltiefe innen links | Dritte Achse: 60% * Reifenprofiltiefe innen rechts | Zweite Achse: 60% * Reifenprofiltiefe innen rechts | Dritte Achse: 60% * Maximale Achslast | Zweite Achse: 9.000 kg * Maximale Achslast | Dritte Achse: 9.000 kg * Bremstyp | Erste Achse: Scheibenbremsen * Aufhängung | Erste Achse: Luftfederung * Marke | Dritte Achse: Andere * Bremstyp | Zweite Achse: Scheibenbremsen * Aufhängung | Zweite Achse: Luftfederung * Aufhängung | Dritte Achse: Luftfederung * Liftachse | Dritte Achse: Ja * Leichtmetallfelgen | Zweite Achse: Ja * Position | Erste Achse: Hinten * Marke | Erste Achse: Andere * Liftachse | Erste Achse: Ja * Leichtmetallfelgen | Erste Achse: Ja * Position | Zweite Achse: Hinten * Position | Dritte Achse: Hinten * Marke | Zweite Achse: Andere * Bremstyp | Dritte Achse: Scheibenbremsen * Leichtmetallfelgen | Dritte Achse: Ja Weitere Ausstattung: * Alcoa-Felgen * Hecktüren * Homepage * Leichtmetallfelgen * Liftachse * SemCollection Semtrade B.V. Kontakt | Martin Klaaijsen | Tel: | Whatsapp: | E-Mail: Exportkosten | Bitte informieren Sie sich im Voraus über die Kosten und Verfahren in Ihrem jeweiligen Land. Standort | Maasdijk (NL) | 140 km von der Grenze | 20 km vom Flughafen Rotterdam The Hague Haftungsausschluss: Änderungen, Zwischenverkauf und Irrtümer vorbehalten.

Year of construction: 2003, condition: used, functionality: fully functional, D&K Acculam 2760 Laminator with Feeder, Exit tray and Transformer. Recently removed from a printshop. Machine has been in full working order and producing live jobs. Machine is sold Ex works. No cutting unit is included. Machine is located in my warehouse in Tadley/Reading UK. Video in production on request. The D&K System 2760 (often referred to as the Acculam series) is a fully automated one-sided lamination system designed for high-volume, short-run digital and offset printing. It typically includes an automatic feeder, a laminator with curl management, and a flying knife separator. Technical Specifications Max Lamination Speed Up to 60 fpm (18 meters per minute) Max Sheet Size 26" x 30" (standard) or up to 28" x 40" (B1 version) Min Sheet Size 8.5" x 11" (21.6 cm x 27.9 cm) Paper Weight Range 80 lb. Text to 18 pt. Board (approx. 115–350+ gsm) Temperature Range 180°F – 300°F (70°C – 140°C) Warm-up Time Approximately 20 minutes Electrical Requirements 230 Volt, 30 Amp, Single Phase Air Requirements 6 cfm (some models may require up to 8 cfm) System Dimensions 5' W x 14' L x 5' H Key Features Feeding System: Utilizes a state-of-the-art automatic suction feeder and belt table to ensure accurate sheet registration. Adhesion Technology: The System 2760 DN variant features two sets of heated nip rollers specifically for better adhesion to difficult digital prints like Xerox iGen or HP Indigo. Curl Management: A patented decurling system ensures sheets lay flat even when using thin paper or thick films like polyester and nylon. Pgedpox Nawnsfx Afheg Versatility: Supports both thermal (heat) and pressure-sensitive (cold) lamination with optional release liner take-up for PSA products.

Condition: used, axle configuration: 2 axles, first registration: 01/1999, total length: 13,750 mm, total width: 2,550 mm, suspension: air, tire size: 315/80 R 22.5, wheelbase: 8,640 mm, Year of construction: 1999, Equipment: ABS, = Additional options and accessories = - Lift axle = Further information = Pgodpoyfd U Uefx Afhog Axle configuration Tyre size: 315/80 R 22.5 Brakes: drum brakes Suspension: air suspension Rear axle 1: twin tyres; left inner tread: 40%; left outer tread: 40%; right inner tread: 40%; right outer tread: 40% Rear axle 2: twin tyres; left inner tread: 40%; left outer tread: 40%; right inner tread: 40%; right outer tread: 40% Weights Unladen weight: 8,110 kg Payload: 24,890 kg Gross vehicle weight: 33,000 kg Functional Loading platform height: 120 cm Condition Damage: none Identification Registration number: OL-14-XG

Condition: new, mileage: 1 km, power: 110 kW (149.56 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, fuel tank capacity: 150 l, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, Year of construction: 2025, Equipment: air conditioning, = Additional Options and Accessories = - Radio/CD player - Spare wheel - Toolbox = Notes = The Mercedes-Benz Accelo 915 4x2 flatbed truck with drop sides is a compact and versatile vehicle, ideally suited for light to medium-duty transport tasks in urban and regional environments. Its maneuverability, fuel efficiency, and payload capacity make this truck an excellent choice for a wide range of logistics applications. Specifications: - Drive: 4x2 (two driven rear wheels) - Engine: 4.2-litre, 4-cylinder Euro 3 turbo diesel engine with 150 hp / 110 kW and 580 Nm - Transmission: Manual gearbox - Safety: Safety markings and side guards - Comfort: Spacious cab with adjustable seats, air conditioning, and multifunction steering wheel Cargo Bed: - Type: Flatbed with drop sides (foldable side panels for easy loading and unloading) - Dimensions: Body length from 5 to 6 meters, depending on configuration - Payload: Up to 4.5 tonnes, depending on load and specification - Material: Aluminum flatbed frame for maximum load capacity - Ergonomic: Low loading height for convenient loading and unloading Options and Customization: - Bed options: Additional lashing eyes and securing points for cargo - Safety: Reflective safety markings and side guards Applications: - Logistics and distribution: Suitable for goods delivery in urban areas - Agriculture: Transport of agricultural products or light machinery Pgodpfx Afjydn Aajhsg - Construction: For transporting building materials such as timber, bricks, etc. - Retail: Suitable for delivering goods to shops or markets Dimensions: L. 7134 mm W. 2148 mm H. 2480 mm The Mercedes-Benz Accelo 915 4x2 flatbed truck with drop sides offers reduced fuel consumption and lower operating costs, thanks to its efficient 4-cylinder turbo diesel engine—perfect for businesses with daily delivery requirements. Its tight turning radius makes this truck ideal for narrow city streets and confined loading areas, making it perfectly suited for urban distribution. = Further Information = Year of manufacture: 2025 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Max. axle load: 3200 kg; steered Maximum rear axle load: 6200 kg Number of cylinders: 4 Engine displacement: 420 cc Gross vehicle weight (GVW): 9,000 kg

Condition: used, axle configuration: 3 axles, first registration: 07/1997, total length: 14,070 mm, total width: 2,480 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 9,880 mm, Year of construction: 1997, Equipment: ABS, = Additional options and accessories = - Air suspension = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle make: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: tyre tread left: 25%; tyre tread right: 25% Rear axle 2: tyre tread left: 30%; tyre tread right: 30% Rear axle 3: tyre tread left: 25%; tyre tread right: 25% Weights Unladen weight: 6,160 kg Payload: 37,840 kg Gross vehicle weight (GVW): 44,000 kg Functional Loading platform height: 140 cm Condition Damage: none Podpfx Afoydlpwohegg Identification Registration number: OF-38-GG

Condition: excellent (used), mileage: 233,000 km, power: 133 kW (180.83 HP), first registration: 10/1998, fuel type: diesel, tire size: 305/70R22,5, axle configuration: 4x2, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 200 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro2, suspension: steel-air, total length: 7,170 mm, total width: 2,450 mm, Year of construction: 1998, Equipment: ABS, crane, differential lock, electric window regulation, = Additional Options and Accessories = - 5-speed manual transmission - Heated mirrors - Comfort driver's seat - Differential lock - Differential lock - Speed limiter - Hydraulic system - Radio/CD player - Sun visor - Power take-off (PTO) - Power take-off (PTO) - Central lubrication = Comments = ORIGINAL DUTCH, GOOD CONDITION DAF FA65-180CF 4x2 CHASSIS WITH HOOK-ARM SYSTEM & HMF 953K2 CRANE BEHIND CAB!! 180HP, 6-CYLINDER ENGINE (MECHANICAL INJECTION PUMP AND INJECTORS)!! ZF MANUAL GEARBOX!! Pgsdpfxjyfhzfo Afhog P.T.O.!! HYDRAULIC KIT!! SUN VISOR!! ETC.!! AJK HOOK-ARM CONTAINER SYSTEM (FOR 5 - 6 METER CONTAINERS)!! HMF 953K2 CRANE MOUNTED BEHIND CAB WITH 2 HYDRAULIC EXTENSIONS!! ROTATOR!! TRUCK IS IN GOOD WORKING AND DRIVING CONDITION, READY FOR USE!! MORE DAF 4x2 / 4x4 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS AVAILABLE IN STOCK!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE; SHIPPING, TRANSIT REGISTRATION, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US, WE ARE A “ONE STOP SHOP” COMPANY!! YOU CAN ALSO WATCH OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) ENGEL TRUCKS; “YOUR GLOBAL TRADING PARTNER” = Further Information = Technical Data Number of cylinders: 6 Engine displacement: 6,242 cc Transmission Transmission: ZF 5 GEARS MANUAL, 5-speed, manual gearbox Axle Configuration Tyre size: 305/70R22.5 Brakes: drum brakes Front axle: Max. axle load: 7,100 kg; Left tyre tread: 70%; Right tyre tread: 70%; Suspension: leaf spring Rear axle: Twin tyres; Differential lock; Max. axle load: 11,500 kg; Left inner tyre tread: 60%; Left outer tyre tread: 60%; Right inner tyre tread: 60%; Right outer tyre tread: 60%; Reduction: single ratio; Suspension: air suspension Weights Unladen weight: 9,460 kg Payload: 9,140 kg Gross vehicle weight: 18,600 kg Functionality Lifting capacity: 9,500 kg Crane: HMF 953K2 / 2 hydraulic extensions / rotator, manufactured 1998, mounted behind cab Body brand: AJK hook-arm system with HMF 953K2 crane, hook-lift container system Maintenance, History, and Condition APK (roadworthiness inspection): valid until 09/2026 Technical condition: very good Visual condition: very good Identification Registration number: BG-TF-03 Further Information Contact Sales Department or Erik Engel for more information.

Condition: excellent (used), mileage: 626,000 km, power: 184 kW (250.17 HP), first registration: 03/2012, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 6,180 mm, fuel: diesel, fuel tank capacity: 300 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro5, suspension: steel-air, total length: 10,000 mm, total width: 2,550 mm, loading space length: 7,650 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, Year of construction: 2012, Equipment: ABS, air conditioning, electric window regulation, power mirror, spoiler, tail-lift, traction control, = Additional Options and Equipment = - Heated mirrors Podsyfhurjpfx Afhogg - Comfort driver's seat - Roof spoiler - Speed limiter - Radio/CD player - Sun visor - Toolbox = Notes = M.A.N. TGM18.250BL 4x2 CHASSIS WITH PLYWOOD BOX, D’HOLLANDIA DHLM 1,500 KG TAIL LIFT, AS-TRONIC GEARBOX & AIR CONDITIONING (ENGINE ISSUE!!) 250HP, EURO 5, 6-CYLINDER ENGINE!! (ENGINE ISSUE!!) AS-TRONIC GEARBOX!! AIR CONDITIONING!! SUN VISOR!! ROOF SPOILER!! ETC.!! MULDER PLYWOOD BOX: DIMENSIONS (L x W x H): approx. 7.65 m x 2.48 m x 2.65 m (internal)!! D’HOLLANDIA DHLM 1,500 KG TAIL LIFT!! SIDE DOOR ON RIGHT!! STAINLESS STEEL TOOLBOX!! ETC!! TRUCK HAS ENGINE ISSUE AND IS NOT DRIVEABLE, WE CAN ARRANGE TRANSPORT FOR YOU!! MORE M.A.N. 4x2 / 4x4 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS AVAILABLE IN STOCK!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE VISIT OUR WEBSITE: SHIPMENT, STACKING, TRANSPORT, TRANSIT REGISTRATION OR LOADING? NO PROBLEM FOR US! WE ARE A "ONE STOP SHOP" COMPANY!! YOU CAN ALSO CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ?v=G1cTWpn_7kQ ) ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information No. of cylinders: 6 Engine displacement: 6,871 cc Transmission Gearbox: AS-TRONIC, 6-speed, automatic Axle Configuration Tire size: 315/70R22.5 Brakes: disc brakes Front axle: Max. axle load: 7,500 kg; Tire tread left: 50%; Tire tread right: 50%; Suspension: leaf spring Rear axle: twin tires; Max. axle load: 11,500 kg; Tire tread left inside: 60%; Tire tread left outside: 60%; Tire tread right inside: 60%; Tire tread right outside: 60%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 8,765 kg Payload: 10,235 kg Gross vehicle weight: 19,000 kg Functional Tail lift: D’HOLLANDIA DHLM 1500, rear liftgate, 1,500 kg Body manufacturer: MULDER PLYWOOD BOX WITH LOADING PLATFORM Loading platform height: 110 cm Condition Technical condition: good Visual condition: very good Identification Registration: BZ-TL-02 Further information Contact Sales Department or Erik Engel for more information.

Condition: used, axle configuration: 2 axles, first registration: 01/1999, total length: 13,750 mm, total width: 2,550 mm, wheelbase: 8,640 mm, Year of construction: 1999, Equipment: ABS, = Additional options and accessories = - Lift axle = Further information = Unladen weight: 8,080 kg Payload: 24,920 kg Pgjdpeydd Dajfx Afhjg Gross vehicle weight: 33,000 kg Loading platform height: 120 cm Damage: none Registration number: OL-12-XG

Condition: used, axle configuration: 3 axles, first registration: 01/2011, total length: 13,710 mm, total width: 2,550 mm, suspension: air, tire size: 455/40 R 22.5, wheelbase: 9,110 mm, Year of construction: 2011, Equipment: ABS, = Additional options and accessories = - Air suspension = Further information = Axle configuration Tyre size: 455/40 R 22.5 Axle make: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 45%; right: 45% Rear axle 2: Tyre tread left: 40%; right: 40% Rear axle 3: Tyre tread left: 35%; right: 35% Weights Unladen weight: 6,500 kg Payload: 32,500 kg Gross vehicle weight: 39,000 kg Functional Loading platform height: 110 cm Condition Damages: none Pjdpfjydd Aisx Afhsgg Identification Registration number: OL-34-GF

Condition: used, first registration: 12/2018, fuel type: diesel, fuel: diesel, Year of construction: 2018, Equipment: crane, Unladen weight: 36,570 kg Lifting capacity: 60,000 kg Crane: Year of manufacture 2018 Damages: none Pedpfx Asyddicofhjgg Registration number: 09698

Condition: used, Year of construction: 2021, Serial number: 21xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22194 Specifications: 2021 model 1102 hours (may increase slightly) Silicone-filled tires (puncture-free) Tires (see pictures) Bucket Forks Lock Articulated steering Auxiliary hydraulics Lights Ready for delivery Description: Podeya Uc Sopfx Afhogg We have a 2021 Giant D204SW wheel loader with bucket and pallet forks for sale. The wheel loader has recently had oil and filter changed, performed by the owner. Everything works as it should, according to the owner. Ready for delivery. HK: 20 Own weight: 1100 Kw: 15 Model: D204SW hjullaster m/ skuffe og pallegafler

Condition: used, machine/vehicle number: ZCFA90D020243xxxx, mileage: 207,223 km, Year of construction: 2004, Please contact ATS Norway for more information Please provide reference number upon request: 22198 Specifications: Podpfx Afsya Ubbohogg • 2004 model • 207,223 km (will increase slightly) • EU approved until: 19.06.26 • 4x2 • Manual transmission • Euro 3 engine • 182 hp • 3-way tipper • Remote control for tipping • Front suspension: steel • Rear suspension: air • Tires (see pictures) • Some sweating on the tipping cylinder • Air conditioning • Radio • Lights • Video • Delivery ready Description: We have a 2004 Iveco 90E18 4x2 tipping truck with 3-way tipping for sale. There is some sweating on the tipping cylinder. Besides this, the truck works as it should according to the owner. There is little rust on the frame compared to the year model and mileage. The truck is delivery ready. Km: 207223 HK: 182 Technical approved: Yes EU-approved until: 19.06.2026 Own weight: 4830 Total Weight: 9000 Payload: 4095 Width: 240 Length: 595 Kw: 134 Euro: 3 Model: 90E18 4x2 tippbil m/3 veistipp Gearbox: Manual

Condition: used, machine/vehicle number: YY9SL28MX2T01xxxx, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 22195 Pedpfx Afoya T U Tehogg Specifications: • 2013 model • EU-approved until: 12.06.26 • 3-axle • Tires (see pictures) • Hydraulic drive-over ramp • Extra reverse lights • Ready for delivery Description: We have a 2013 Damm SL-28M 3-axle machinery trailer with hydraulic drive-over ramp for sale. Everything works as it should according to the owner. Some cosmetic damage may be present since it is from 2013. It is EU-approved and ready for use. Ready for delivery. Technical approved: Yes EU-approved until: 12.06.2026 Own weight: 7780 Total Weight: 30000 Payload: 22220 Width: 255 Length: 1192 Model: SL-28m 3 akslet maskinslep m/ hydraulisk kjørebro

Condition: used, machine/vehicle number: WKESD00000088xxxx, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 22261 Specifications:• EU-approved until 29.05.2026• Model year: 2019• Air suspension• Tyres (see photos)• Thermo King refrigeration unit• Total hours: approx. 4,233• Engine hours: approx. 4,180• Internal length: approx. 1,349 cm• Internal height: approx. 272 cm• Overall length: approx. 1,404 cm• Width: approx. 260 cm• Axle spacing: 131 / 131 cm• Unladen weight: approx. 8,891 kg• Maximum payload: approx. 36,109 kg Description:Krone box semi-trailer with Thermo King unit with approx. 4,180 engine hours.EU-approved until May 2026.Available for delivery at short notice. Technical approved: Yes EU-approved until: 29.05.2026 Own weight: 8891 Total Weight: 45000 Payload: 36109 Width: 260 Length: 1404 Model: 2019 Krone skapsemi med Thermo King aggregat Pgjdjyduu Nepfx Afhog