Used Wrap Machine for sale (64,827)

Year of construction: 2017, condition: excellent (used), Ferrari Sistemi IM 1050 Cheese Wrapper Bwsdpfx Aioz Dvl Eswjw Manufacturer: Ferrari Sistemi Model: IM 1050 Machine Type: Automatic Cheese Wrapping / Packaging Machine Country of Manufacture: Italy Application: Cheese processing and packaging Technical Description The Ferrari Sistemi IM 1050 is an industrial automatic cheese wrapping machine designed for the packaging of cheese products within an automated or semi-automated cheese processing line. The machine is suitable for use in dairy and cheese-processing environments and is designed for continuous industrial operation. Its stainless-steel construction and food-processing design make it suitable for hygienic cheese production and packaging applications. Individual piece or complete cut & pack room available Ferrai machine (block cutting options) - 5T/Hr - 2017 Cryovac machine - 5T/Hr - 1980 Metal detector - 5T/Hr - Around 2006 DEM labeller - 5T/Hr - 2018 Bypass - 4T/Hr - Around 2010

Condition: used, Year of construction: 2016, machine/vehicle number: 405329, Submitting a bid obligates you to collect the item on time, no later than December 23, 2026! Bwsdpfx Aij Agvquewjw Auction of a Beck MP 240X! Note: Accessories are sold as is, without warranty. The following applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: excellent (used), Year of construction: 2017, operating hours: 627 h, functionality: fully functional, total length: 6,900 mm, total height: 1,800 mm, total width: 1,600 mm, type of input current: three-phase, input voltage: 400 V, input current: 62 A, passage height: 300 mm, overall weight: 1,200 kg, passage width: 800 mm, input frequency: 50 Hz, nominal power (apparent): 43 kVA, throughput speed: 20 mm/s, temperature: 250 °C, Equipment: documentation/manual, BVM SC 8530 D3 Shrink Tunnel – Year of Manufacture 2017 – approx. 627 operating hours For sale is a BVM shrink tunnel SC 8530 D3, year of manufacture 2017, in technically flawless and visually very good, well-maintained condition. The system has only approximately 627 operating hours and is suitable for shrinking packaging films using hot air circulation. The adjustable tunnel transport and the adjustable side and bottom air flow allow the shrinking result to be adapted to different products and films. Technical data Manufacturer: BVM Brunner GmbH & Co. KG Type: SC 8530 D3 Year of manufacture: 2017 Machine no.: 20170962241 Commission no.: 6224 Operating hours: approx. 627 h Mains voltage: 3N 400 V Mains frequency: 50 Hz Current consumption: 62 A Power: 43 kVA Fuse rating: 63 A Max. passage width: 800 mm Max. passage height: 300 mm Transport speed: approx. 1.2 m/min at 50 Hz Bjdpfszwk T Tjx Aiwsww Working temperature: 110–250 °C Suitable for film types up to 100 µm External dimensions L × W × H: approx. 6,900 × 1,600 × 1,800 mm Total weight in operating condition: approx. 1,200 kg Sound emission: ≤ 75 dB(A) Equipment / Functions Hot air circulation Adjustable tunnel transport Temperature control Adjustable side air flaps Adjustable bottom air flow Heating fan Cooling fan Electronic preset counter Emergency stop device Cooling automatic Clean and clearly structured control cabinet Original operating manual available Condition The system is in perfect technical condition and is also visually in very good and well-maintained condition. With only approximately 627 operating hours, the machine has very low operating hours. Price €17,000 (negotiable) Inspection possible by arrangement. Further information and pictures available upon request. Subject to prior sale and errors.

Condition: ready for operation (used), functionality: fully functional, The THIMON SWING PRO 5-sided strapping machine is a state-of-the-art industrial solution designed to provide complete pallet strapping using a single consumable. Thanks to its patented triangular arm technology combined with a motorized rotary table, it performs the packaging of all five sides of the pallet in a single cycle, while guaranteeing excellent load stability. This technology improves the protection of goods against dust, moisture, and stresses related to transport. Designed for the food processing, logistics, pharmaceutical, paper, or manufacturing industries, the WRA-PAL SWING PRO combines a high throughput with reduced stretch film consumption. Its motorized pre-stretch module and 1,000 mm film width allow for a reduction in consumable usage of 20 to 40% while improving load retention. Furthermore, its capacity to accommodate reels up to 100 kg offers significantly greater autonomy than conventional systems and limits production downtime. The machine easily adapts to different pallet sizes thanks to its numerous adjustments. Its cutting and heat-sealing device eliminates film tails at the end of the cycle, while its patented pleated film system reinforces the cohesion between the pallet and the load. In addition, the use of a single film for all five sides guarantees inviolable product protection and improves their preservation during storage and transport. At Europ'Équipement, this strapping machine undergoes a complete overhaul before being sold. Each component is inspected, serviced, and tested to offer manufacturers a reliable, high-performance, and immediately operational solution, while significantly reducing the investment compared to new equipment. Technical specifications: Packaging of all 5 sides with a single film reel Motorized rotary table Bodjzhwfkjpfx Aiwjww Patented triangular arm with mobile linkage Motorized pre-stretch module Film width: 1,000 mm Adjustable pre-stretch: 0 to 350% Reel capacity up to 100 kg Automatic cutting and heat-sealing device Pleated film reinforcing load cohesion Anti-fall system for the stretching carriage Touchscreen operator interface Frequency inverters Programmable industrial controller Adaptation to different pallet sizes Simplified maintenance thanks to optimized kinematics

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: Bwjdpfoxxb Rrjx Aiwew X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Traysealer Multivac T350 Bedpozulkhjfx Aiwoww These Multivac T-350 tray sealers are ideally suited for packaging food, medical, and pharmaceutical products. The automatic tray sealer achieves up to 6 cycles per minute, providing high production capacity. This sealing machine can process various types of trays, including plastic (PE, PP, PET), aluminum, and foam trays. The tray sealer can perform sealing, vacuum packaging, and MAP packaging (gas flushing). It is an ideal packaging machine for meat, fish, game, poultry, cheese, pet food, baby food, and other products. The machine is completely manufactured from stainless steel. Production capacity: 6 cycles/min Functions: sealing, vacuum, MAP gas flushing Equipped with: 2-compartment format: (2x) 158 x 125 mm Optional: Busch vacuum pump, 160 m³/h Voltage: 400 V (3 + N, 50 Hz) Power: 7.5 kW Dimensions (W x D x H): 3870 x 1150 x 2050 mm

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, type of input current: AC, product height (max.): 2,200 mm, product length (max.): 1,500 mm, product width (max.): 1,500 mm, input voltage: 230 V, working height: 2,200 mm, CYKLOP CST 212 pallet wrapper, semi-automatic packaging machine Foiling of palletized goods with stretch film, for loads of different sizes and weights. Manufacturer: CYKLOP CST 212 Type Wrapping machine (Avvolgitore) Year of manufacture: 2020 Turntable diameter: 1600 mm Turntable speed: 4 - 12 rpm Bwsdpfx Aew Tzdveiwew Turntable speed can be adjusted in several stages The starting height of the foiling can be adjusted in several stages Pallet height sensor Rainproof program Load: Length/width: Max. 1000x1200 Height: 2.2 meters Pallet weight: max. 2000kg Weight: 645 kg Frequency: 50/60 Hz Total current consumption: 10 A Voltage: 230, 1-Phase, 50/ 60 Hz Power supply: 0, 85 kW

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: 070/2819, Automatic pallet strapping machine Manufacturer: Itipack Model: SP1/F Serial number: 070/2819 Specifications: - Electrical power supply: 400 V, 50 Hz - Motor power: 1 kW Bwodpfx Aiez Inlfjwow - Current: 2.5 A - Strapping band size: steel band 16 × 0.4 mm Year of manufacture: September 2009 Approximate weight: 1,000 kg Approximate dimensions (L × W × H): 2,400 × 1,500 × 2,500 mm

Condition: used, Semi-automatic pallet wrapping machine, stretch wrapping machine Design with a horseshoe-shaped rotating platform for easy loading with a pallet truck Bsdpopygwqefx Aiweww Semi-automatic pallet wrapping machine Manufacturer: Siat Type: HSD 312-S Model A 400 Volt / 50 Hz Year of manufacture: 2000 Pallet wrapping machine Capacity: 1200 kg Rotating platform: with fork recess Rotating platform diameter: 1500 mm Adjustable rotating speed of the rotating platform Motorized film pre-stretch adjustable to 100% or 200% Rotating table height: 75 mm Wrapping programs Program 1: Double wrapping with raising and lowering of the film carriage Program 2: Double wrapping with raising – pause for attaching the top cover of the pallet – and lowering of the film carriage Program 3: Simple wrapping with only raising of the film carriage Program 4: Simple wrapping with raising of the film carriage and pause for attaching the top cover Intended use Wrapping palletized loads with stretch film or netting pallet wrapping machine Maximum pallet dimensions: L = 1200 mm W = 800 mm H = 2100 mm kg = 1200 pallet wrapping machine, stretch wrapping machine More articles – new and used – can be found in our shop! International shipping costs on request!

Condition: like new (used), Year of construction: 2020, Professional Vacuum Packaging Machine Minipack-Torre MVS 45 X I am offering for sale a professional chamber vacuum packaging machine, the Minipack-Torre MVS 45 X, manufactured by the well-known Italian company, Minipack-Torre. The machine is in excellent, like-new condition and has been very well maintained. It features a high-quality stainless steel construction and digital controls. Suitable for professional vacuum packaging of food and other products. Ideal for restaurants, butcher shops, food processing facilities, and small manufacturing businesses. Technical Specifications: Manufacturer: Minipack-Torre, Italy Bwsdpoz Rv R Nefx Aiwjw Model: MVS 45 X (MV45X) Year of manufacture: 2020 Power supply: 220–230 V Frequency: 50–60 Hz Maximum power consumption: 1.1 kW Maximum current: 6 A Digital control panel Stainless steel construction Transparent vacuum chamber lid CE marking Condition: Like new Price: €600 Location: Ivanka pri Nitre, Slovakia For more information or if you are interested, please feel free to contact me. The machine can be inspected in person by prior arrangement.

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, LEONARDO has all the properties of the small, yellow LEO stretch robot, such as the small working area of 750 mm around a pallet, compact design and motorized drive. In addition, it offers an electronically adjustable film brake, up to 100% motorized film stretching and the patented push mast, which allows it a winding height of 2,350 mm - with a total height of only 1,560 mm when not in use. • Compact design: only 75 cm space required • For pallets up to a maximum height of 2350 mm • Patented extension mast, from 1560 mm (at rest) to a maximum height of 2,350 mm Bwjdpfxeih Srij Aiwow • Electronically adjustable film brake, a motorized up to 100% • Electric maneuver (patent) that reduces the work area compared to other robots • 6 freely programmable programs (program memory) • Wide caliper strap • Electrically controlled steering • Maintenance-free battery (2 x 12 volts) • Charger: 220 volts integrated Pallet dimension: Length: min. 600 mm / max. without limit Width: min. 600 mm / max. without limit Height: min. 500mm / max. 2350mm Foil thickness of 8-30 my Pallet weight: min. 50 kg machine size: Height: 1,560 mm (resting state) Length: 1066mm Width: 738 mm Weight: 195 kg Battery for electric drive 24 V Built-in quick battery charger 230 V Warranty: 12 months (single-shift operation),

Year of construction: 2004, condition: good (used), functionality: fully functional, Wrapping machine Manufacturer: Böhl Bwodpfxeznczdj Aiwow Type: BSB-45 SX-2 Year of manufacture: 2004 Total power consumption: 2.5 kW Product dimensions: Width: 5-250 mm Height: 5-250 mm Length: 600-6000 mm Machine weight: 950 kg Includes roller tables: 2 x 4 m

Condition: used, Year of construction: 2021, machine/vehicle number: DW2110130101, functionality: fully functional, power: 32 kW (43.51 HP), input voltage: 380 V, input current: 85 A, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 30 mm, number of axes: 4, number of slots in tool magazine: 10, total height: 2,400 mm, total length: 4,300 mm, total width: 2,250 mm, overall weight: 2,000 kg, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, Equipment: CE marking, We offer this used Apollo 4AX 2030 CNC Router, year of manufacture 2021. Manufacturer: Apollo Bodpfxez Iz Imo Aiwjww Model: 4AX 2030 Year of manufacture: 2021 Condition: used Machine type: CNC Router If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Semi-Automatic & Fully Automatic Pallet Wrapping Machine Manufacturer: Cousins Model: LPSWA-CE (“The Switch Semi2Auto”) Operating Type: Semi-automatic & Fully automatic Year of Manufacture: 2021/2022 Features and Specifications of the LP-SWA SERIES Production Speed: Up to 35 loads per hour. Load Capacity: Maximum load weight: 4,500 lbs dynamic – 10,000 lbs static Maximum load size to safely pass through the tower: 67" x 67" (96" load diagonal) x 80" H Maximum load size to remain within the turntable: 46" W x 46" L (65" load diagonal) x 80" H Low-profile turntable: 65-inch diameter, laser-cut steel plate with all-around deck protection. Maintenance-free 54-roller bearing support system. Turntable height 2.813 inches from the ground. ANSI No. 50 direct chain drive with chain tensioner. Rotational speed between 3 and 12 RPM with smooth start acceleration. 1/2 HP AC motor with variable speed. End-of-cycle deceleration and positive stop alignment. Robust all-around deck to protect the turntable, 3-sided loading, and pit mounting. Forklift openings front and rear for easy movement. Accu-Count precise turntable positioning system for additional film savings! Film carriage lift: 1/2 HP DC motor with variable speed ANSI No. 40, direct chain drive with shock absorber and anti-drop protection Automation Features: All-electric – No pneumatics required Patent-pending A-arm film cutting and holding device starts and ends the wrapping process at the top of the load. Cousins Smart Engineering has developed an advanced cutting and holding device with the A-arm. It offers significant productivity improvements and safety benefits. This technology is only available on Cousins machines. This unique method of applying and cutting the stretch film offers the following advantages: • Selectable top wrapping function • Stabilizes the load early in the wrapping cycle • Places the film end at the top of the load instead of at the bottom • No film clamp on the turntable that can be damaged by dirt or operator error – also, no slip rings are needed to power the turntable, reducing maintenance Bodpjwb A N Rjfx Aiwoww • The placement of the load on the turntable is not critical • No air connections or noisy compressors • New automatic load detection safety feature during the first rotation detects uneven or partially stacked top layers and automatically adjusts the A-arm height to avoid obstacles • A-arm anti-drop protection Control Functions: Electronic control with LED user interface Wireless start/stop remote control with one transmitter (additional transmitters available) On/Off/Reset switch and operating indicator Automatic wrapping cycle start/pause with a single button Cycle pause for applying top sheets Reinforce wrapping control for the wrapping center Emergency stop button Turntable jog button Buttons for lowering and raising the film carriage Control of film tension (force-to-load) Separate speed controllers for raising and lowering the film carriage Variable speed control of the turntable Three-beam automatic load height sensor for dark or glossy loads Separate control for 1 to 12 wraps for upper and lower wrapping Selectable parameters for reduced film tension for top wrapping

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23SFERA05, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series Bodpfxoz Indue Aiwsww 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 3500mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 1340, type of input current: three-phase, input voltage: 380 V, Multivac Galaxy TS 355 Blister Packaging Machine Bods Ah E Hzopfx Aiwoww The Multivac Galaxy TS 355 is a semi-automatic lidding machine designed for packaging products (particularly food) in rigid trays, in a modified atmosphere (MAP), or under vacuum. Key Features: • Output: Up to approximately 10 cycles per minute. • Control: Multivac MC 06 control system. • Film: Film width up to 500 mm, with trim winding. • Vacuum/Gas: Equipped, depending on the configuration, with a vacuum pump (e.g., Bosch or Busch, 63 m³/h to 100 m³/h) with inert gas injection and high-performance sealing. • Hygiene: IP55 protection and rounded shapes that facilitate cleaning, suitable for demanding environments or cleanrooms. • Power: Three-phase electrical connection (380V), compressed air, and water, depending on the options.

Condition: new, Year of construction: 2024, functionality: fully functional, Machine with frictioned roller carriage and tension adjusting of the film. The machine run with any type of stretch film. Completely mechanical driving, it doesn’t required any electric supply. Bwodpexwa H Njfx Aiwjw

Year of construction: 2016, condition: like new (used), functionality: fully functional, BÖHL JUNIOR S 450 VA fully automatic packaging machine / wrapping machine for spirally wrapping long goods with packaging material (typically stretch film) Product dimensions • Width: 15 – 220 mm • Height: 15 – 120 mm • Length: approx. 600* / 800 mm to 6,000 mm • Weight: approx. max. 3,000 kg / 6 meters including carriage - maximum cross-sectional diagonal of the product: 220 mm (customer-specific) Note: max. weight only possible if transferred with a powered, in-house conveyor system. (A) 600 mm* without carriage (B) 800 mm with carriage or distance between carriages min. 600 mm Packaging materials • PE stretch film, thickness approx. 17 – 50 μm (recommended 23 μm) • Roll diameter max. 400 mm • Roll width max. 125 mm • Core diameter 76 mm Specifications • Wrapping ring D = 450 mm inner diameter • Speed max. 20 m/min. (frequency-controlled) Technical data • PLC control Siemens S7 with touch panel • Control voltage 24 V DC • Connection voltage 3 x 400 V – 50 Hz • Power consumption approx. 7 kW • Pre-fuse 35 A • Noise level 75 db (A) • Operating pressure 6 bar • Air consumption approx. 20 standard liters per cycle Technical section • Packaging material feed and mechanical pre-stretch system for 125 mm • Automatic clean-cut cutting unit for the packaging material • Electromotoric height adjustment of the wrapping ring • Automatic height detection of the product via light barriers • Packaging material tear and end detection • Pneumatic pressure rollers on the infeed and outfeed sides • Powered transport rollers on the infeed and outfeed sides in the machine • Quick-change device for packaging material rolls • Manually adjustable side guide plates as side centering in the infeed • SIEMENS frequency inverters for wrapping ring drive and feed • Complete electrical control, SIEMENS PLC S7 with touch panel • 2 m powered conveyor system with PU-coated rollers in the infeed area • 2 m powered conveyor system with PU-coated rollers in the outfeed area Packaging program - the following packaging programs are included: Wrapping - the product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product (edge protection). The overlap of the film during wrapping can be adjusted using a frequency inverter. Wrapping with intermediate bandages - the bundling points are activated by means of a timer. The product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product. In addition, stability bandages are wrapped. The transport is stopped after adjustable distances, and layers are wrapped in place for an adjustable time. The overlap of the film during wrapping can be adjusted using a frequency inverter. This program may eliminate the need for strapping bands in some cases. Bundling - the bundling points are activated by means of a timer. The product is not wrapped along its entire length. Film bandages are wrapped, and the number of layers per bundling point is adjustable. The distance between the bundling points can be preset via the timer. Continuous transport without wrapping Machine dimensions (without safety fence): • Length: 1,930 mm • Width: 1,500 mm • Height: 2,200 mm • Conveyor height: 900 mm • Machine weight approx. 1,600 kg Operating side: on the right in the direction of transport Paint: machine RAL 7032, gray Bjdpezn Ipyjfx Aiwoww The system is in VERY GOOD technical and optical condition.

Condition: used, Year of construction: 1997, Henkovac H 1000 – Industrial Vacuum Packaging & Sealing Machine (1997) The Henkovac B.V. H 1000, manufactured in 1997, is a robust industrial vacuum packaging and sealing machine designed for high-volume food processing environments. Built for reliability and durability, it is ideal for commercial kitchens, food processors, and manufacturing lines that require hygienic, efficient, and consistent vacuum packaging. Key Features: - Heavy-Duty Vacuum Packaging: Securely evacuates air from packages, extending product shelf life and maintaining quality. - Reliable Sealing: Ensures airtight seals for a variety of food products, including meats, cheeses, and prepared meals. - Industrial-Grade Construction: Designed for continuous operation in demanding food processing environments. - Versatile Application: Suitable for vacuum packaging of different types and sizes of food products. - Long-Term Reliability: Proven design ensures dependable performance even after decades of use. Bwjdoyudxxepfx Aiwew - User-Friendly Operation: Controls and interface designed for efficient workflow in industrial kitchens. Technical Highlights: - Manufacturer: Howden Food Equipment B.V. - Model: H 1000 - Year of Manufacture: 1997 - Machine Type: Industrial vacuum packaging and sealing machine - Applications: Food processing, commercial packaging, shelf-life extension Whether for high-volume production lines or specialized food processing tasks, the H 1000 delivers professional vacuum sealing performance, combining durability, hygiene, and reliability. More photos and full specifications: / * Manufacturer: Henkovac * Model: H 1000

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Bjdpsx D Tbmsfx Aiwsww Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), I am offering a SANPACK FIX pallet wrapping machine designed for securing loads with stretch film during storage and transport. Bwodjz Sm Ngspfx Aiwow Technical specifications: Manufacturer: Sanpack Model: SANPACK FIX Power supply: 3×380V + N + PE Frequency: 50 Hz Power: 0.55 kW Rated current: 2.0 A Protection rating: IP54 Advantages: Rotating pallet table Stretch film holder Robust industrial construction Control panel operation Ideal for warehouses, production facilities, and logistics centers Visual condition matches the photos. The machine is used.

Condition: reconditioned (used), Year of construction: 2005, machine/vehicle number: 3069 / BM5132, BM5132 Professional wrapper with stretch film height adjustment Bedpfx Aijqpgl Rswoww Wrapping height approx. 2,500 mm Turntable diameter 1,600 mm max. load 1,600 kg Film roll width 500 mm Weight approx. 500 kg Supply voltage 400V - 50 Hz - 3 Ph

Condition: used, Film Wrapping Machine for pharma single and multipacks Pester PEWO-fold Bsdpfxo Af Ahvo Aiwjww Folieneinschlagmaschine für pharmasichere Einzel- und Sammelgebinde - Film Wrapping Machine for pharma single and multipacks Pester PEWO-fold Year 1991 - Serial-No. N-261 Maschinen Abmessungen: 2950 x 1450 x 2100 mm [L x B x H] Ausstattung: K-Stapler Min. Formatbereich: Faltschachtel 30 x 15 x 60 mm [a x b x h] Gebinde 60 x 30 x 60 mm [L x B x H] Max. Formatbereich: Faltschachtel 150 x 80 x 250 mm [a x b x h] Gebinde 250 x 250 x 140 mm [L x B x H] Leistung: bis zu 60 Gebinde/ Min. Steuerung: Schneider Electric PacDrive 3 / Rockwell Automation (Allen-Bradley) Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: refurbished (used), Year of construction: 2004, functionality: unexamined, total width: 1,200 mm, total length: 5,000 mm, total height: 2,000 mm, product height (min.): 850 mm, film width: 420 mm, The machine can process both hard and soft film, is capable of tray forming, product gas flushing, and has forming tool cooling, or can perform only vacuum forming. Various forming tools included: 1:1; 1:2; 1:3; additionally, slice packs with peel corner are possible. Comes with a fully refurbished vacuum pump. Also included are approximately 50 rolls of film. The machine must be removed from the premises, hence special price for everything: €3,000 negotiable. Bodpfx Aeynnlcjiwoww

Condition: new, Year of construction: 2026, CORMAK FUTURA1620P Pallet Stretch Wrapping Machine Bsdpfx Ae Ahiuweiweww The CORMAK FUTURA1620P is a pallet stretch wrapping machine equipped with an E-shaped turntable, designed to secure loads with stretch film in warehouses, logistics centres and manufacturing facilities. The cutouts in the platform allow pallets to be loaded and unloaded using a standard manual pallet truck (pallet jack), without the need for an additional loading ramp. With a load capacity of 2000 kg, a wrapping height of 2000 mm and a turntable diameter of 1650 mm, the machine can prepare palletised loads of various dimensions for transport, provided they fall within its operating range. Adjustable rotation speed and a capacity of up to 40 wrapping cycles per hour make it easy to adapt the wrapping station to regular shipping operations. E-Shaped Turntable – Convenient Pallet Truck Loading Without a Ramp The key distinguishing feature of the FUTURA1620P is its rotating platform with cutouts arranged in the shape of the letter E. The spaces between the load-bearing sections of the turntable allow the forks of a compatible pallet truck to be inserted without having to drive onto a raised platform using a ramp. This solution is particularly useful in facilities where pallets are routinely transported using manual pallet trucks. Side guide rails are positioned in front of the platform cutouts to guide the pallet truck. They help the operator align the truck correctly with the turntable and accurately insert the forks into the designated spaces. This makes loading more organised and efficient, especially when handling multiple pallets at the same wrapping station. The loading process involves just a few simple steps: the operator approaches the machine with a pallet, inserts the forks into the cutouts, lowers the load onto the turntable's supporting surfaces and withdraws the pallet truck. Once the wrapping process is complete, the pallet can be picked up again with the pallet truck and transported to the storage or shipping area. The absence of a loading ramp eliminates the need to manoeuvre a loaded pallet truck up an incline and reduces the additional floor space required in front of the machine. Main Advantages of the CORMAK FUTURA1620P Pallet Wrapper - E-shaped turntable – designed for loading and unloading pallets using a pallet truck. - Side guide rails – help correctly align the pallet truck with the cutouts in the platform. - Ramp-free operation – simplifies workplace organisation and eliminates the need to push a loaded pallet truck up a ramp. - Load capacity of up to 2000 kg – enables the wrapping of heavy palletised loads within the turntable's permissible load limit. - Adjustable rotation speed of 0–12 rpm – allows the wrapping speed to be adapted to the characteristics and stability of the load. - Mechanised stretch film wrapping – reduces the need for operators to manually walk around pallets while applying stretch film. Load Capacity, Wrapping Height and Turntable Diameter in Practice The maximum load capacity of 2000 kg makes the pallet wrapper suitable for securing pallets containing bulk packaging, industrial components, warehouse materials and finished products. Technical Specification Turntable diameter [mm] 1650 Load capacity [kg] 2000 Maximum load dimensions [mm] 1200 × 1000 Wrapping height [mm] 2000 Turntable shape E-shaped Turntable rotation speed [rpm] 0–12 Film pre-stretching Yes