Laboratory furnace

Nabertherm R70/9

Year of construction: 1986, condition: refurbished (used), Chamber filter press, cpl. General overhaul in stainless steel lining, 82 filter plates in PP (food safe), 30 mm cake thickness, press capacity approx. 1100 litres, filter area 96 m2, fitted new filter cloths, max. 15 bar feed pressure possible, closed outlet via 2 diagonal corner holes, automatic plate transport and filter cloth washing system in stainless steel , high-pressure pump 100 bar, Manzini piston pump (MC-100 in stainless steel) for filling, with base for raising (stainless steel), control cabinet Pjdpfxsn Dw Nks Ah Uoha

Condition: like new (used), functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 2020 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feeds from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametrical pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake Pjdpfevrckqex Ah Usha >> 2 emergency stops On request: covers for the guide. and feed spindle About the machine: A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. The Weiler runs very quietly even at high speeds. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: new, Filter cloths for all filter presses in all sizes and qualities, short delivery times, ask us Phedsg Azmmjpfx Ah Uja Location is 58762 Altena

Condition: ready for operation (used), machine/vehicle number: 64532, used hand hydraulic tube bending machine existing bending segments: 3/8, 3/4, 1 1/4 u. 2" space requirement: 850 x 640 x 780 mm Pedpjdzw Hwsfx Ah Ueha

Year of construction: 1987, condition: ready for operation (used), Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible. Pjdpfxsrgahxj Ah Ueha

Condition: new, saw blade diameter 315/350 mm capacity 90 degrees: round 125 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 160x90 mm capacity 45 degrees: round 105 mm capacity 45 degrees: square 90 mm capacity 60 degrees: flat 80x100 mm total power requirement 1,8/2,5 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,6 x 1,22 x 1,06 m The large workshop saw with sophisticated technology. (20070) • For miter cuts right and left up to 45°, end stop at 90° and at 45° left • For sawing steel, stainless steel, and, to a limited extent, aluminum profiles • Vice with quick-release lever, longitudinally adjustable clamping jaw, adjustable guide, and double clamping arm for burr-free cuts • Conical safety clutch made of hardened steel to protect the saw blades. • Large base plate made of solid cast iron for maximum stability and low-vibration sawing • 2 speeds: 30 + 60 rpm Podpfxed Iin Te Ah Uoha • Powerful special gear with elastic clutch for heavy-duty use • Automatic cooling directly on the saw blade • Saw head with double bearings • 24 V safety switch in the handle with restart lock • Length stop, assembly tool ATTENTION: Price does not include saw blade!!!

Condition: used, Technical details: max. ram stroke: 250 mm workpiece diameter - max.: 80 mm Phjdpfow Au I Iox Ah Uea max. workpiece length: max. 900 total power requirement: 1,5 kW weight of the machine ca.: 2,1 t

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, For optimum recovery of non-ferrous metals or purification of materials Psdpsvdqdijfx Ah Ueha This extremely powerful machine is mainly used for processing household waste, shredder materials, household appliances, wood, plastic, glass, IBA and bed ash and electronic scrap. This IMRO non-ferrous metal separator stands up to the demands of very high recovery quotas and high purity levels.

Year of construction: 2021, condition: new, Graver Grinding Machine Make: HERZOG (AMA) Model: Pregraph U2 Condition: New machine with warranty - for grinding of gravers, pins, punches and round parts - robust, durable construction - versatile application possibilities - motor protection and restart protection Phedpfxogllp Uo Ah Usa accessories: - Extraction tool, through axial adjustment of the disc, the previous setting is setting is retained - Machine light - Operating tool - Grinding wheel with flange - Operating instructions

Condition: used, Year of construction: 2005, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Equipment: type plate available, Mitutoyo Crysta Apex C7106 coordinate measuring machine Temperature compensation on all axes Active vibration isolation system from BILZ X-axis measuring range = 700 mm Y-axis measuring range = 1000 mm Z-axis measuring range = 600 mm Measurement uncertainty = 1.9 + 3L/1000 (µm) Renishaw PH10MQ probe head Renishaw SCR200 interchangeable rack Renishaw TP200 sensor Renishaw TP200 modules = 6 units MCosmos measuring software WIN10 PC system, 27" monitor Reference sphere / calibration sphere Optional software upgrade Phjdpfx Ahjwhb A Nj Uoa Optional hardware upgrade Full service available upon request