Gear motor 0.18 kW 105 rpm

Neri T63BN/4

Year of construction: 1986, condition: good (used), Built in: 1986 Size: 460 x 310 x 60 mm Speed: 6.000 c/h Pgjdpfx Aedymnbediow Equipment: • hand fed • 18 clamps • resting table • milling station • equalizing-leveling • hotmelt spine gluing unit • gauzing station • pile cover feeder • four line scoring • cover pressing station

Condition: excellent (used), Year of construction: 2001, For sale LVD PPEB 80/25 in very good technical condition. Under power, can be inspected any time Pgsdsrx S Hnopfx Adisw

Condition: used, Hydraulic guillotine shear STEINER type HTS 30/20 R Machine. No. 315 Year of construction 1982 cutting length 3050 mm cutting thickness 20 mm backgauge 800 mm controlled motor power approx. 30 kW mains connection 400 Volt, 50 Hz - backgauge with positioning control ELGO - backgauge adjustment via ball screws - Safety light barrier SICK at the front as intervention protection - 3 material support arms with ball rollers - electric foot switch - spare blade Space requirement of the basic machine L x W x H 4650 x 2610 x 3200 mm Pgodpfx Adjd Hxx Asisw Weight of the basic machine 27000 kg Space requirement for transport (basic machine) L x W x H 4650 x 2610 x 3200 mm Space requirement for transport (additional) L x W x H 3500 x 2450 x 1400 mm Weight complete 27000 kg Mechanically in very good condition Hydraulic problems, Electrical control in need of overhaul.

Year of construction: 1999, condition: excellent (used), machine/vehicle number: 700571/99-280108, Working width max. (mm): 660 Podpfx Adjixqb Sjiogw

Year of construction: 1993, condition: used, Chamfer lenght: 3.000 mm Stands passage: 2.750 mm Max. pressure: 180 t Podpfx Ajkh Niqodijgw Control: CYBELEC DNC 70 Stroke: 220 mm Total power: 15 kW Weight of the machine: 11.000 kg

Condition: ready for operation (used), AMADA PROMECAM 3000 x 6 shears Type GPX 630 Capacity 3000 x 6 Maximum stroke 160 mm Rate 16 to 45 strokes/min Pgjdpfx Adjvt Svreiew Cutting angle from 40' to 2°20' Rear stop stroke 1000 mm Motor 15 kw Approximate weight 6500 kg Dimensions 3750x2000x1850 mm

Condition: new, Year of construction: 2025, Swing cut guillotine shear Cutting length 3100mm Material thickness steel 10mm Pedpfxjlac Drj Adijgw Knife for stainless steel Touch control Cybelec backgauge 1000mm Cutting gap adjustable via control Delivery time 3 months

Condition: used, Year of construction: 1995, Perfect binding line Wohlenberg Master 6501 Year: 1995 Consisting of Gathering machine Wohlenberg Sprinter 7010 Description: - Hand feeding station - Number of gathering stations: 16 - Optical sheet control: WST (total 4 of 24) - Excluding pump(s) - Machine was connected to a centralised air system - Set up element - Transfer into the binder Perfect binder Wohlenberg Master 6501 Description: - Number of clamps: 18 - Milling and roughening station - Dust extraction system - Hotmelt spine glue unit with integrated pre-melter - Hotmelt side glue unit with integrated pre-melter - Gauzing station - Rotary cover feeder Pgodpfx Adstt Ug Ijijw - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Transport system vertical, length (approx): 30 mtr - Escape delivery Description modified on 14-04-25

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 320 t, working range: 4,100 mm, Like Baykal 320ton x 4metre Cnc Pressbrake For sale Make: Baykal Capacity: 4metre x 320ton Axis: R and X axis on the back gauge - 2 axis back gauge Year: 2022 Control: Esa S660W Complete with tooling: Multi V lower as well as segmented tooling Technical information: Up to 12mm thickness at 4 meters / Up to 15mm thickness at 3 meters Bending power: 320 tonne 5 axis Bending length (over tooling) 4100mm Pgodpovgc R Hjfx Adijw Bending length (between frames) 3550mm automatic under crowning and laser angle measurement system with live feedback to CNC control for the most accurate folding process

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pgodpfx Aew Iq Ugjdiew Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition