Extraction Conveyor 500 MM - BRAND NEW!

Nutek NTM 410M 500

Year of construction: 2013, condition: used, machine/vehicle number: 10074, System: piston diaphragm pump Manufacturer: Abel Type: CM G E272 Manufacturer no.: 10074 Construction year: 2013 Performance: 15 m3/h Pressure: 1.00 MPa Motor: 7,5 kW, 50 Hz Rodpfxsdkdi Ne Aaasr

Condition: used, Year of construction: 2015, 20 Ft. Shipping container equipped with screw compressor installation with 2 Ingersoll Rand R30I-A10 screw compressors of 30 kW each. Rjdpewbf U Nsfx Aaajr

Condition: new, overall weight: 340 kg, volume flow: 1.44 m³/h, Atlas Copco G11FF screw compressor Specifications: - condition - New - manufacturer - Atlas Copco - capacity - 1440 l/min - main engine power - 11,0 kW - tank - 500 l - maximum operating pressure - 10.00 atm - built-in refrigeration dryer - electronic setting of compressor operating parameters - soundproofed cabin (only 67 dB) - meets CE standards - weight - 340 kg Additional information: - possibility to obtain a manufacturer's warranty after commissioning by an authorized Atlas Copco service center - instruction manual in Polish and a set of documents for the Office of Technical Inspection - available immediately or within 7 working days Rsdpfx Ash Unupeaaor

Year of construction: 2006, condition: good (used), Airpress screw compressor with dryer Rodei Eq D Depfx Aaaer Bar: 10 Tank: 200 L Year: 2006

Condition: used, color: red, Year of construction: 1981, operating hours: 4,391 h, Tank pressure: 11 bar Rjdpfx Aajx S Nxasaer

Year of construction: 2019, condition: as good as new (ex-display), Rolling burr tool Make Gleason - Hurth Rsdefgwt Ejpfx Aaaer Type:CH7M5R - 7B340-B1A 200 mm diameter unused is delivered in a wooden box Weight 9,5 kg

Condition: ready for operation (used), Year of construction: 1960, machine/vehicle number: 719, Manufacturer: Hurth Model : LF 00 Machine No. : 719 Year of manufacture : ca.1960 Weight: ca. 400 KG General / technical data: used horizontal grooving milling machine with crank gear controlled groove length adjustment and automatic depth adjustment groove width for cutter Ø: from 2 to 10mm length of grooves in one cut: from 0 to 60mm + cutter diameter 10 depth feeds feeds: 0,03 to 0,3 mm milling feed: 8 speeds of the milling carriage by crank stroke: 5,1 / 7,3 / 10,2 / 13,9 / 18,4 / 25,4 / 34,7 / 49,5 strokes/min spindle speeds: 4 pieces 970, 1370, 1950, and 2750 rpm table dimensions (rigid table): 160mm x 355mm table height adjustment: 40mm Rodpfx Aeg Uq Dfeaaer transversal movement of the table ( against the cutter ): 110mm power supply / spindle motor power: 380Volt 50 HZ / 0,8 KW / 920 1/min approx. space requirement of the machine: 670mm x 1100mm x 1200mm (bxtxh) Accessories / special equipment: Chip tray coolant device Machine documentation Remarks: The machine is in a condition corresponding to its age. The machine is preferably designed for production use in small and medium series. The machine has a simple crank gear adjustment to determine the length of the groove.

Year of construction: 2015, condition: excellent (used), The drum follower plate system A280 has the proven Scheugenpflug double-piston pump. This pump only comes into contact with material on one side, while a flushing liquid on the rear ensures that abrasive fillers do not get caught on the seals. With this system, highly abrasive, pasty media can be conveyed continuously and reliably with an unrivaled service life. 2 Component Follower Plate System. Redpfx Ajif Ug Esaasr

Condition: used, Year of construction: 2019, Compressor with tank and dryer Airpress VSD22 INTEGRA Serial no. R4337F/2019 Year of manufacture 2019 Max 8 bar Power 22 kW 120 cfm 204 m³/hr Tank capacity 600 L Effective capacity 996 l/min Refrigerant R407C 400 V Dimensions 1950 × 878 × 1785 mm, weight 775 kg Rjdpfx Aajwh Ncqoaer - Year: 2019 - Documentation available: Yes - CE certificate present: No - Serial number: R4337F/2019 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), 4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve Rsdpfxjgw Ture Aaasr -Manufacturer: Rexroth, hydraulic control block from Fischer DHS 12 / 3000 guillotine shears -Type: 4 WEH 32 E 33 / 8LW 220-50 NET -Pressure relief valves: Rexroth type DBW 20 B 2-30 -Dimensions: 560/365 / H335 mm -Weight: 154 kg