Measuring Plate

PLANOLITH Messtisch 3000 x 2000 x 930mm

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one Gedpfsfg E Hpsx Aadstu The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: Gtjdofg E Hlepfx Aadeu 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: good (used), Marble plate Length: 3500 mm Width: 1500 mm Thickness: 300 mm Height on feet: 930 mm Godoig Hu Nepfx Aadotu Number of feet: 5 feet 1 small failure on the top (L 150 mm x W 20 mm) - see photo Weight: approx 3 T

Condition: good (used), Year of construction: 2000, Manufacturer: KUKA Gtedpfx Aajh Dwr Uedsu Tip: KR 350/2 Year of manufacture: 2000 Net weight: 1870 kg Without cable and control cabinet. Addendum to the measurement report!

Year of construction: 2022, condition: as good as new (ex-display), Manipulator with hydraulic height adjustment, face plate with clamping slots and manual remote control. Height (face plate horizontal): approx. 532 - 1.132mm Lifting distance/lifting time (hydraulic): approx. s = 600mm, t = 20s Swivel range of face plate: approx. +-300°. Height (Pl.-sch.vertical axis): approx. 709mm Gtjdpfx Ajfw Ah Readsu Dimensions face plate: Ø1.200mm x 40mm, 6x clamping slots Speed of the main axle: approx. 2.0 rpm (other Torque main axis of rotation: approx. 7,500 Nm Face plate speed: approx. 2.5 rpm Face plate torque: approx. 1,500 Nm

Year of construction: 1999, condition: used, pulling force - max. 6,0 t max. ram stroke 1250 mm dimensions of the machine ca. 1,20 x 1,20 x 3,25 m Gsdpfxed Il A Ns Aadetu

Condition: used, length:1800 mm width:1200 mm weight of the machine ca.:1,6 t Gjdpfxscxxu De Aadetu dimensions of the machine ca.:1,8 x 1,2 x 0,4 m

Condition: ready for operation (used), travel distance X-axis: 750 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 725 mm, Equipment: chip conveyor, documentation/manual, 4-axis machining center, year 2016, control: Siemens 840D Solution Line, NC rotary table 360 x 0.001 degrees, 2-fold pallet changer, pallet size: 500 x 630 mm, 60-fold tool changer, HSK63 tool holder, IKZ, Knoll PF 210/1750 gravity belt filter, Hyfra TKR 30 coolant temperature control, Knoll 450 K-1 scraper belt conveyor, infrared measuring probe Godpfxjrx Sh Ae Aadjtu

Condition: used, Year of construction: 2000, turning diameter . mm turning length . mm Gtedpfxjqn A Rne Aadeu control 2x 840 D Kühlmittelsystem chip conveyor ja kW generator - rated current 95,00 A connected load 65,00 kW

Condition: excellent (used), Perfectly preserved six-spindle INDEX MS 25 automatic lathe with six transverse and six longitudinal tool guides. Gtodpfx Aajqhkukodsu The price is negotiable depending on the selected additional equipment: clamping pods, tools, chip conveyor, etc. The machine is still in production. Viewing possible by arrangement.