Tilting dividing table Ø 300 mm

Plateau diviseur inclinable Ø 300 mm

Condition: ready for operation (used), functionality: fully functional, HURON NU-4 is equipped with several buttons, switches and levers to control its operations. x-travel: 1100 mm y-travel: 700 mm z-travel: 500 mm spindle/table distance: 9-509 mm Kodpfxsriulge Ah Usnf spindle head - swivelling: 360°. spindle taper: SK 40 Meziv spindle speed range: 30 - 2066 rpm spindle speed steps: 27 feed rates: 1.6 - 820 mm/min feed steps: 27 table surface: 1435 x 460 mm rapid traverse on X and Y axes: 2.8 m/min rapid traverse on Z axis: 1.4 m/min total power requirement: 10 PS(HP) weight of the machine approx.: 3.1 t dimensions of the machine approx.: 2.36 x 1.65 x 1.45 m (w x h x d)

Condition: excellent (used), Year of construction: 2008, TECHNICAL DATA Table Clamping surface: 1200 x 450 mm Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distances Between T-slots: 65 mm From spindle center to underside of counter-support: 160 mm Feeds Longitudinal feed: 0-4000 mm/min Cross feed: 0-4000 mm/min Vertical feed: 0-1500 mm/min Rapid traverse Longitudinal feed: 4000 mm/min Cross feed: 4000 mm/min Vertical feed: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55-3000 Head, swiveling: 0-140 ° Quill Movement Quill diameter: 90 mm Quill stroke: Manual Feed: 75 mm Weight: approx. 2300 kg SCOPE OF DELIVERY Among others (not an exhaustive list): Knedpfewuurwsx Ah Uef ABENE milling machine Heidenhain control Tool holder set Coolant pump Leveling feet Mounting block Complete operating documentation Exact scope of delivery according to photo documentation

Condition: excellent (used), Maximum machinable diameter above the bed: 575 mm Maximum machinable diameter above the slide: 525 mm Maximum machinable diameter above the small cross slide: 300 mm Distance between centers: 2000 mm Spindle passage diameter: 51 mm Number of spindle speeds: 18 Spindle speed range: 32 to 2500 rpm Bed width: 400 mm Maximum cross slide travel: 305 mm Kodpfx Ahswlgdyo Usnf Maximum upper slide travel: 140 mm Maximum tailstock travel: 150 mm Overall dimensions: 3405 x 1175 x 1345 mm Machine weight: 2200 kg

Condition: ready for operation (used), Year of construction: 1984, spindle bore: 51 mm, turning diameter over bed slide: 575 mm, center width: 1,500 mm, turning length: 1,500 mm, overall weight: 2,000 kg, 2 axes Heidenhain DRO, capacity 1500x575 mm, spindle bore 51 mm, Multifix turret Knjdpsw Hp Rxjfx Ah Ujf

Condition: used, Year of construction: 1984, weight 1,4 t 227 Kodpfxsnl Nq Ho Ah Usnf ja

Condition: used, Parallel Lathe CAZENEUVE HB 575 x 1500 mm Kodpsxwcwdefx Ah Uonf Between points: 1500 mm Maxi Ø on bench: Ø 575 mm Maxi Ø over saddle: Ø 300 mm Spindle diameter: Ø 51 mm Spindle speed: from 25 to 2000 RPM Square turret 3-jaws chuck: Ø 350 mm Spindle motor: 8,8 kW Threadings: Metric + Whitworth Tailstock: CM5 Auto Feeds longitudinal + transversal Straight Bed Lubricant tank Lubricant pump Voltage: 220 V Tri Dimensions (L x W x H): 3000 x 1300 x 1800 mm Weight: approx 2,2 T

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, table width: 450 mm, table length: 1,530 mm, table load: 350 kg, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Knodpfxoxtbkus Ah Uof Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!