Soft PVC Coextruder

Politsch PCO-30

Year of construction: 2011, condition: good (used), functionality: fully functional, machine/vehicle number: 10061195, Soft PVC Coextruder Gsdpoxgh Imjfx Abdoil

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: Gedeg Ezaropfx Abdjil 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2-1, 2006, Eurobend CNC 16x4 rebar from coil straightening and cutting machine in used but working condition. 4 x 5 Ton decoilers with pneumatic brakes. 4 x rotor for diameter 8-10-12-16 mm rebar wire straightening and automatic cutting with hydraulic moving cutters. 1 line or even up to 4 lines together cutting. PC with barcode scanner option. Cutting length up to 14 meters and more. Pockets for storage. Chain conveyor for transport of bundles. Gisdpfx Absrdvq Ajdsl

Condition: used, machine/vehicle number: 11415, Rotor diameter: 260 mm Rotor width: 260 mm 3-blade rotor, 2 rows of stator blades Inlet cross-section approx. 260 x 260 mm Gedpfsghgl Isx Abdoil Drive motor 5.5 kW Grinding mill with built-in feeder for bar stock. Weight approx. 500 kg

Condition: used, wire diameter - max. 10 mm Gjdewu Hg Hepfx Abdoil wire diameter - min. 3 mm wire length 8 m total power requirement 7,5 kW weight of the machine ca. 1,1 t dimensions of the machine ca. LxBxH 2,53 x 0,75 x 1,1 m

Condition: good (used), machine/vehicle number: 334, Year of construction: 2006, Offer 25428 Height-adjustable aluminum double-girder gantry crane - mobile Technical specifications: - Electric chain hoist by ABUS, type GM 6, year 2018, 1500 kg capacity - Electric chain hoist with two lifting speeds: 4 and 1 m/min - Operation via electric hand remote control - Electric chain hoist equipped with manual lateral travel brake - Min. / max. total height approx. 3100 / 4350 mm - Min. / max. clearance height (lower edge of gantry): 2780 / 4020 mm - Min. / max. hook height approx. 2150 / 3430 mm - Clearance between end frames approx. 4800 mm - Total width approx. 5000 mm Gijdpjxwm A Djfx Abdjl - Total depth approx. 2200 mm - 4 swivel castors - Total weight – crane plus hoist: approx. 300 kg - Power supply: 400 V

Condition: good (used), Year of construction: 2010, Arburg 570 H 2000-400 (2010) Clamping force: 200 t Gsdpfswpkfcsx Abdsil Screw diameter: 35 mm Shot weight: 141 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 154 cm3 Screw stroke: 160 mm Injection pressure: 2000 bar Type: Horizontal Drive: Hybrid Equipment: Thermoplastics cylinder cpl. 35 mm high-wear resistance Drive unit w. 11 kW motor and 21.4 l/min capacity SELOGICA 'direct' controller Air blast system 1 with pressure reducer Interface for robot system (EUROMAP 67), 50-pin AED - electrom. dosage drive 9 electr. heating control circuits for mould heating Interface for colouring device 8 free cooling circuits manually adjustable Position-regulated screw

Year of construction: 2016, condition: ready for operation (used), Control panel: Siemens SIMATIC HMI, connected load: 80kW, weight: 1.85t, operating hours: approx. 4500h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Documentation is complete, on-site inspection is possible. Godpfx Aov Uz Awobdsil

Condition: used, functionality: fully functional, machine/vehicle number: 036, Year of construction: 1997, IDE single screw extruder for PVC profiles Gedpfexghxrox Abdeil

Condition: like new (used), DEMAG chain hoist DKUN 10 - 2.5 tons. Gijdsxpw N Sspfx Abdsl