Bending machine tools and accessories

Promecam OUTILLAGES

Condition: ready for operation (used), Year of construction: 2005, - USED - TUBE BENDING MACHINE AXIS: 3 MAX TUBE DIAMETER: 30X2 mm WORKING LENGHT: 3000 mm Redevhc Uuepfx Ah Uol X-AXIS POSITIONING SPEED: 900 mm/sec Y-AXIS BENDING SPEED: 200 °/sec Z-AXIS ROTATION SPEED: 360 °/sec MAX BENDING RADIUS: 20 A 170 mm CONTROL UNIT: DNC800

Year of construction: 1992, condition: good (used), 21 rolls, Ø 80 mm strip width: 500 - 1.650 mm strip thickness: 1 - 5 mm Rodpfsg Iirnjx Ah Ujl

Condition: used, different types available Rjdodc A Sbjpfx Ah Ujl

Condition: excellent (used), Year of manufacture: 1991 Rjdjwq Dpqjpfx Ah Usl Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Working stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R The machine starts up, but the control unit does not respond to commands. The previous owner replaced the original AMADA control with a DELEM unit.

Condition: good (used), Press Brake Brand: AMADA Model: HFT 80/25 Capacity: 2500 x 80T 4 axes Distance between uprights: 1800 mm Dimensions: 3500 x 1500 x 2100 mm Weight: 6,500 kg Rodpfxowivdds Ah Uol Equipped with new and used tooling

Condition: good (used), Year of construction: 1978, sheet thickness brass (max.): 3 mm, Motorized folding machine Fab. Lotze Typ. HZ - 2500 x 3mm year 1978 Technical data Make: Lotze Type: HZ-25 Year of construction: 1978 Effective length: 2500 mm Sheet thickness: max. 3 mm Equipment Redpfjrc E S Esx Ah Uol - Bending angle adjustment via potentiometer - Tool package with focus rail, bending rails, reinforcement rails - Manually adjustable back gauge All specifications without guarantee

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Rodpfoxddvnex Ah Ujl Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.

Condition: used, Year of construction: 1986, plate thickness 6,0 mm pressure 18 t cutting angle - upper blade 90 ° blade length 225 x 225 mm voltage 380 V total power requirement 5,5 kW Rjdeg Ip Efspfx Ah Uel weight of the machine ca. 650 kg dimensions of the machine ca. 1,10 x 0,80 x 1,05 m - Angular stops adjustable

Condition: used, Technical details: Rsdpfxjw Au I Ij Ah Uel max. ram stroke: 250 mm workpiece diameter - max.: 80 mm max. workpiece length: max. 900 total power requirement: 1,5 kW weight of the machine ca.: 2,1 t

Condition: used, functionality: fully functional, Year of construction: 1989, roller (top) diameter: 200 mm, side roll diameter: 150 mm, sheet thickness (max.): 6 mm, working length: 3,000 mm, Working length 3000 mm Bending capacity 6 mm Bending capacity 4 mm Top roller diameter 200 mm Rjdeuzm Ayjpfx Ah Ujl Diameter of side rollers 150 mm Hydr. folding bearing