Bulk feeder

Przenośnik taśmowy 10m / 0,55m

Condition: like new (used), Year of construction: 2019, Vacomat 350 XP TWIN Nedpfszp Edwox Aazowl The Vacomat 350 XP TWIN is a high-performance dust extraction unit and a true energy-saving marvel among mobile dust extractors. Two frequency-controlled motors (5.5 kW each) ensure that the suction power is adjusted accordingly, especially under highly variable operating conditions. This ensures that only the energy that is actually needed is consumed. This dust extractor handles air volumes of up to 10,000 m³/h and is ideally suited for extracting dust from large CNC machines or entire machining centers. The innovative and highly intelligent control system automates the extraction process in conjunction with the connected machines. Extraction starts automatically as soon as a connected machining center is switched on. If the power requirement is lower, only one fan is started. As soon as several extraction points are in operation, the second fan is automatically switched on. As standard, the filter sleeves are cleaned automatically during operating breaks, as soon as all connected machining centers are switched off. Our patented filter shaking system then ensures gentle cleaning via a pneumatic/mechanical process using a compressed air connection (inlet pressure 6 bar, air consumption per cleaning cycle approx. 11 l). Optionally, and particularly recommended for very high and extremely fine dust concentrations, such as gypsum dust, an efficient pressure pulse cleaning system is available. The cleaning process via the compressed air tank takes place offline, after the extraction operation (NOTE: height then +100 mm and length +350 mm). Our Vacomats are manufactured using a modular system. As standard, the dust and chip mixture is discharged into four dust-tight chip collection containers (4 x 120 l) with durable plastic liners. A negative pressure channel securely holds the foil bags in the collection container. Viewing windows make it easy to check the fill level. Low energy consumption thanks to a modern, high-efficiency motor (IE3) "Made in Germany" and a flow-optimized internal housing with low air resistance. Heat recovery through a recirculation system: The warm exhaust air is filtered and fed back into the workshop. Low noise level: A double-walled filter sleeve housing absorbs the extraction noise directly inside the Vacomat. In addition, the fan housing is soundproof. Approved for indoor installation in the wood dust area - manufactured according to the new DIN EN 16770 standard. Healthy return air: High-quality, specially developed filter materials made of antistatic polyester needle felt filter out 99.9% of dust and chip waste from the air (dust class M for St 1 dust, according to TRGS 553). Increased safety through fire and explosion protection measures according to DIN EN 16770: pressure pulse tested up to 20,000 Pa, automatically activated powder extinguishing system - no water damage! Operational reliability: A pressure gauge continuously monitors the extraction performance. Error messages are displayed by the signal light. Low follow-up costs due to high-quality components and long service life of the filter medium: For example, an extra-large settling chamber ensures an initial separation of coarse chip waste. This prevents the filter sleeves from being additionally loaded with material. Low maintenance effort thanks to the maintenance unit on the motor console and easy access to the inside of the filter. All specifications according to the manufacturer.

Condition: new, Year of construction: 2026, Make: S&F GmbH Nwodpfx Aajw Ad Rrozjl Type: MFB-500/5 Belt width: 500 mm Centre distance (A-A): 5,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: worm gear motor Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.1 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 450 kg Machine colour: RAL 6009 Fir green Suitable for the following bulk materials, among others: Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,8 / 20 Nedpfxeidqphs Aazewl Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) by N.C. 08.376 (Kw 4,5 x 2) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) 283.1513 + 283.201 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.42 (Kw 0,66 x 2) 0°-25° - max 30 m/min, Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-30° Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) 08.348 (KW 0,66 x 2) 4 profiles Profile edge scraping unit 08.516 (4 profiles) Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Buffing unit 08.612- 2 (Kw 0,25 x 2) Milling grooving unit 08.183 (Kw 3 x 1)

Condition: refurbished (used), SINGLE-SIDE SIZING & EDGE BANDING MACHINE (Left side machine) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 1 ALU Panels thickness (min/max) mm 6 - 55 Numerical Control /Software IMATRONIC 121 /01 Adjustable feeding speed (m/min ) 6 - 30 SIZING PART : Pre-milling Unit (vertical joint trimmers) adjustable by N.C. (2 x Kw 4,5) 08.376 Spraying unit (Anti-sticking liquid) EDGE-BANDING PART : Lamps to heat the workpieces side + Glueing Unit (P.U.R. Glue + Quick Melt unit) 04.1569 Band Pressure zone mm 1000 + Edge coils supporting unit (N. 6 reels) Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) working speed 25 m/min (swivelling 0-25°) Rough Trimming unit 08.0555 (2 x Kw 1) Fine Trimming unit 08.055 (2 x Kw 1) 30° + Spraying Unit (for sliding liquid) Multi-Profile Copying unit 08.348 (fine and contour trimming) adjustment by N.C (2 x Kw 0,66) Profile edge scraping unit (Multi-profile, adjustable by N.C.) 08.516 Glue scraping unit 08.517 (Pneumatic) Nedpfx Ajcr T N Doazewl Spraying Unit (for polishing liquid) Buffing unit 08.614 (2 x Kw 0,25) Milling grooving unit 08.183 (1 x Kw 3) Smoothing unit with spheres 08.53 Chamfer Sanding Unit for straight edges WI (4 x Kw 0,75)

Condition: used, Technical details: floor-plate length: 2000 mm plate width: 1500 mm plate height: 820 mm Plate thickness: 185 mm weight of the machine ca.: ca. 2,1 / 2,2 pro Platte t transport dimensions LxWxH: ca. 2,0 x 1,5 / pro Platte m There are 6 of these clamping plates for sale. (price per piece) Material cast steel/profile casting T-slots according to DIN 650: a=43; h=105; b=76; c=50 mm; center distance 375 mm 4x passage holes Ø 90 mm 10x fixing holes Ø 25 mm with countersink Ø 85 x 135 mm with base frame for shelf no. 1+3+4+5+6: L: 1990 mm x W: 1490 mm x H: 185 mm with base frame for panel no. 2: L: 2020 mm x W: 1515 mm x H: 520 mm Nwedpfju N D Rdex Aazol *

Condition: new, Year of construction: 2025, operating hours: 8 h, functionality: fully functional, conveyor belt width: 900 mm, conveyor belt length: 18,320 mm, discharge height: 8,320 mm, motor manufacturer: Caterpillar, Belt length / width: 18,320 / 900 mm Njdpfx Asw Hccneazjwl Cat C1.7 engine: output 36 kW at 2,800 rpm Conveying capacity: approx. 400 t/h Discharge height: 8,320 mm at 22.5° incline Belt: hydraulically retractable and extendable Height adjustment: hydraulic Remote control: wired remote Crawler undercarriage length: 1,800 mm with 400 mm track plate

Condition: good (used), Year of construction: 2023, operating hours: 1,031 h, functionality: fully functional, overall weight: 18,999 kg, Belt width: 1,200 mm Belt length: 30,500 mm Dimensions in working position: 28,219 x 2,489 x 12,268 mm (L x W x H) Discharge height at 22° inclination: 12,268 mm Engine manufacturer: Cat C2.8 Operating weight: 18,999 kg Transport dimensions: 16,078 x 2,489 x 3,149 mm (L x W x H) Nwodpoyw Hlujfx Aazsl Engine power: 55 kW Throughput: approx. 700 t/h

Condition: like new (used), functionality: fully functional, New feed hopper, approx. 11 m³ Inlet opening: approx. 4.0 x 2.4 m new steel structure with BRÄUER discharge chute Working area: 600 x 1,000 mm Nwodezvytgjpfx Aazol Drive with 2 unbalanced motors

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 081263, Connection value: 380V, 1.85kW, 4.8A Length of pressure bar: 3100 mm Nwodpfeh U Dbrsx Aazol Pneumatic material clamping with manual lever valve Chassis Stop guide, 520 mm long 6x support brackets

Condition: like new (used), functionality: fully functional, New feed hopper, approx. 15 m³ Nedpfxszr D Tvs Aazowl Inlet opening: 3.7 x 3.1 m New steel structure made of HEB200 profiles with discharge chute from HAVER & BOECKER Working area: 1,750 x 1,250 mm 2 x 1.4 kW drive