Universal machining center

QUASER UX 500/15C Dyn

Condition: good (used), Year of construction: 2014, Universal Machining Centre Gbedpjxrcx Djfx Afcsw Machine type: DMG DMU 75 monoblock Control: Heidenhain iTNC 530 Year of manufacture: 2014 TECHNICAL DATA: 5-axis simultaneous machining Travel distances: X-axis: 750 mm Y-axis: 650 mm Z-axis: 560 mm B-axis: +/- 120° C-axis: 360° Number of controlled axes: 5 5-axis simultaneous Spindle speed range: 18,000 rpm Tool holder: SK 40 Tool changer Number of tool stations: 60 NC rotary-swivel table: Ø 650 mm Table size: 800 x 650 mm Max. table load: 600 kg Connected load: 48 kVA Machine weight: 12,000 kg Space requirements (LxWxH): 3.2 x 2.62 x 2.93 m Equipment features: Chip conveyor Internal coolant supply (IKZ): 40 bar Paper band filter Measuring probe: 3D Tool measurement: Blum laser Electronic handwheel Oil mist extraction Air through spindle center Bed flushing Operating mode: 4

Condition: good (used), Year of construction: 2011, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Technical data: Control: Mazatrol 640M Travel X – Y – Z axis mm: 1740 / 760 / 660 Rapid traverse X – Y – Z axis m/min: 36 / 36 / 36 Table Table size mm: 2000 x 760 Table load capacity kg: 1,400 Distance between table surface / spindle nose mm: 160 – 840 Main spindle Speed min-1: 12,000 Main drive power (5 min. / 30 min.) kW: 18.5 / 11 Automatic tool changer (ATC) Number of positions / spindle taper: 30 / SK 40 Max. tool diameter mm: 80 - with free adjacent positions mm: 110 Gedpfx Aswpu Hdefcobw Max. tool length mm: 350 Max. tool weight kg: 8 Machine height mm: 3442 Installation area mm: 4435 x 3300 Machine weight kg: 11,500 Accessories: Relocation detector Automatic tool length measuring system Preparation for partition for pendulum machining Electronic handwheel EIA / ISO programming Synchronous tapping Through-spindle coolant 5 bar Chip conveyor

Condition: excellent (used), functionality: fully functional, grinding length: 2,000 mm, grinding width: 700 mm, total length: 5,760 mm, total width: 1,770 mm, grinding height: 500 mm, grinding wheel diameter: 457 mm, table length: 2,400 mm, table width: 600 mm, space requirement length: 5,760 mm, space requirement width: 1,770 mm, WORKING CAPACITY: Max grinding length: mm 2.000 Max grinding width: mm 700 Max grinding height: mm 500 TABLE: Length of the fixing grooves: mm 2.400 Useful dimensions of the support surface: mm 2.000 x 600 Godpfxswdxd Ne Afcjbw Dimensions and distance between the three T-slots: mm 14 x 200 Max longitudinal stroke: mm 2.130 Continuously adjustable speed: m/min 2 ÷ 35 GRINDING WHEEL: Normal dimensions (diam. x hole): mm 457 x 203 Normal width: mm 100 Speed with 50 Hz motor: rpm 960 Max transverse stroke: mm 600 Intermittent transverse feeds: mm 1 ÷ 10 Adjustable transverse movements in continuation: m/min 0.1 ÷ 6 Automatic vertical feeds: mm 0.005 ÷ 0.05 MISCELLANEOUS: Overall dimensions: mm 5.760 x 1.770 Weight: kg 9.300

Condition: used, Year of construction: 2015, TAKISAWA LA250 year 2015 FANUC MANUAL GUIDE Max turning diameter (mm) 450 Max tuning length (mm) 765 Z-axis 800mm Gbodpfx Afovxu Uzecjw Spindle max 3500rpm Bar capacity (mm) 75 Chuck size (inch) 10" Turret 12 Positions Tool probe Parts Catcher with machine : -chip conveyor with coolant tank -Holders

Condition: good (used), Year of construction: 2009, functionality: fully functional, turning length: 1,500 mm, turning diameter: 550 mm, spindle motor power: 22,000 W, spindle speed (min.): 3,800 rpm, spindle bore: 80 mm, power: 22 kW (29.91 HP), Equipment: rotational speed infinitely variable, Okuma Macturn 350 2SW-1500 Big Bore main spindle, machine type CNC turning-milling center Make / manufacturer Okuma Okuma Model / type MacTurn 350 2SW1500 BigBore Year of manufacture 2008 / 2009 Control OSP P 200 L IGF One Touch Advanced + CAS Spindle turning time 6437 h Technical data Max. turning diameter: 550 mm Max. turning length: 1,500 mm Travel path of upper turret (milling spindle): X-axis: 505 mm/190 mm/1670 mm Y-axis: 190 mm (+95 /-95) Z-axis: 1670 mm W-axis: 1680 mm Travel path of lower turret: X/Z 210 mm/ 1670 mm Main spindle “Big Bore” version Spindle motor main spindle 22 kW, 412 Nm Max. speed main spindle 3800 rpm Spindle nose main spindle JIS A2-8 Spindle passage 80 mm Max. bar diameter: 71 mm C-axis 0.001 ° Counter spindle “Super Big Bore” version Spindle motor counter spindle 22 kW, 412 Nm Max. speed counter spindle 3300 rpm Spindle end counter spindle JIS A2-8 Spindle passage 80 mm Max. bar diameter: 71 mm Milling spindle Spindle motor milling spindle: 11 kW Max. speed milling spindle: 12000 rpm Tool holder: HSK 63 B-axis: 0.001° Tool magazine: 44 stations Lower turret Tool positions: 12 Tool holder: VDI-40, Driven tool stations: 12 positions Gbedpfxsvta Rdo Afcsw Max. power of driven tools: 7.5 kW Max. speed of driven tools 4500 rpm Machine weight: approx. 15,000 kg Space requirement 6000 x 3500 x 3000 cm Other features - High pressure cooling 40 bar - Chip conveyor Interlit ISF 614 - Heavy crane filter Interlit SBP 4 - Touch Setter - Helical Cutting - 4 Extra M-Code Set - 2x hydraulic power chuck SMW BH-D 315-95 diam. 250 mm - DNC- T1 interface - RS 232 C interface - Chuck blow-off function main counter spindle - TAS -S + TAC-C Status report after commissioning in Bergisch Gladbach Geometry measurement results Reverse play XA - axis 0.015 mm Reverse play XB - axis 0.015 mm Reverse play ZA - axis 0.020 mm Reverse play ZB - axis 0.020 mm Reverse play Y - axis 0.010 mm XA - axis measured with measuring mandrel at 300 mm 0.02, YA at 300 mm 0.007in T1,T2, T3 B-axis: alignment and function good M-drive lower turret: tested and good Milling spindle: tested up to 6000 rpm, no abnormalities Main/counter spindle tested , no abnormalities High pressure pumps function well, no abnormalities Accessories - 2 x hydraulic crane chuck SMW - pallet with 16 driven tool holders, 10 HSK 63 holders, 3 VDI 40 holders - lifting hook on the front - all original axle locks Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: ready for operation (used), Year of construction: 2005, Measuring dimensions X/Y/Z: 800mm/1000mm/700mm, max. workpiece weight: 800kg, measuring accuracy: 0.0005mm, repeatability: 0.002mm, measuring plate dimensions X/Y/Z: 1040mm/1780mm/250mm, rotary swivel head: Renishaw PH 10T Plus. The PH 10T was replaced in 2023. Documentation available. On-site inspection is possible. Godpfxeu Ur Sqs Afcjbw

Year of construction: 2004, condition: good (used), Traverses X Y Z; 680 x 394 x 625mm, B axis -110/+ 65 degrees, C axis 0.001 degrees, Godpfem H Uyzox Afcobw pallet diameter 130mm, maximum workpiece diameter 300mm, maximum workpiece height 250mm, number of pallets 40, spindle taper BT40, 240 Station ATC, spindle speed 12000rpm, Fanuc G-Tech 16I control, through spindle coolant, and swarf conveyor.

Year of construction: 1998, condition: excellent (used), Coordinate measuring machine ETALON Derby 454 Measuring range 457x508x406 mm Dimensions LxWxH 895x885x1575 mm Gjdpfx Aokvm Txefcjbw weight approx 220 kg Renishaw TP8 measuring head last calibration 2020

Year of construction: 1999, condition: good (used), machine/vehicle number: 112150, Table surface area: 300 x 500 mm Travels x / y / z: 420/300/250 mm Spindle mount: BT 30 small / large Distance table / spindle: Spindle speeds: approx. 10 - 10000 rpm Feeds: approx. 5 - 10000 mm / min Rapid traverse: x u. y / z 25/20 m / min Gbedpfx Afjf Sainocjw Spindle drive: 7 kW electr. Connection: 400 V, approx. 9 kVA kW Required space: 2500 x 1500 x 1450 mm Weight: approx. 2800 kg

Condition: used, Year of construction: 2011, turning length: 510 mm, turning diameter over cross slide: 290 mm, spindle motor power: 15 W, spindle speed (max.): 6,000 rpm, spindle bore: 51 mm, travel distance X-axis: 175 mm, travel distance Z-axis: 510 mm, chuck outer diameter: 170 mm, overall weight: 3,300 kg, Equipment: documentation/manual, Controller: Fanuc i-series. - Tool holder type: BMT 45 - Turret: 12 positions (12 driven) - Manual tailstock - Coolant: 7 bar - 3-jaw chuck 170 mm Gjdpfow Duygsx Afcobw - 4-jaw chuck 170 mm - Radial and axial driven tool holder: 1 pc each