Broaching Machine-Internal - Vertical

RAUSCH RS10/1300

Year of construction: 2003, condition: ready for operation (used), A total of seven injection molding machines Arburg are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, plate distance: 750mm, plate dimensions X/Y: 570mm/570mm, tie bar distance: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, plate distance: 350mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, injection volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, injection volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Psdpfx Ahetyyn Hs Uoha

Condition: used, Year of construction: 2007, No. 3177 Optimizing cross-cut system Grecon Dimter OptiCut 200-1 Used, year of construction 2007 For cross-cutting fixed lengths Wood dimensions to be processed: Input lengths min./max. 3000 - 5000 mm Input widths min./max. 80 - 200 mm Input thicknesses min./max. 38 - 80 mm Timber cross-sections max. 200 x 50 Final timber length min./max. 700 - 1000 mm Average number of cuts / board 5 Wood types: Softwood or hardwood Performance of the system: Feed speed max. 180 m/min, infinitely variable Time per cross-cutting process incl. brakes 0.7 - 1.2 s Position overview: Phjdpfou Atmusx Ah Uea Pos. 1: Infeed conveyor belt in front of saw Length 1.5 m coupled with feed motor of the saw Item 2: OptiCut 200-1 automatic cross-cut saw in left-hand design With built-in length measuring wheel and built-in blow-out device for waste Graphics-capable input terminal, 1 / 4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is fed from the left Pos. 3: Outfeed conveyor belt / sorting station with drive unit, without ejector Belt length approx. 1.5 m Machine already dismantled and stored The infeed table was not used by the previous owner. 2 feed rollers were installed for the material feed. The conveyor table is there, only the rubber belt is missing. Sale on behalf of customer, ex location Austria, without transportation and assembly Errors in description and price excepted Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Controller FANUC Series 18i-MB Table size 1300 x 650 mm Table load 1500 kgs X travel 1100 mm Y travel 650 mm Z travel 600 mm Phsdpfeuu Rzrjx Ah Uea Spindle speed 12000 rpm Tool holder type MAS BT40 ATC magazin 30-fold Weight 7200 kgs Dimensions LxWxH = 3100 x 2300 x 3100 mm Features, accessories - Chip conveyor - Coolant unit - Spindle cooler - CTS - Manuals Very good condition.It will be sold because of liquidation of production.

Year of construction: 2007, condition: excellent (used), TOP CONDITION - OVERHAULED IN 2022! Year of construction: 2007 Table format: 3000 x 1500 x 100 mm Power: 4000W Control: Mazatrol preview with LAN / USB incl. cooler Phjdpfx Ajhturvjh Uja incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. quick piercing incl. ball roller table incl. 4 x head change magazine incl. 2 cutting heads incl. 10 x automatic nozzle changer FE: up to 20mm VA: up to 12mm oxide-free designed for high pressure cutting up to 20 bar No Foundation is necessary! Optional automatic loading and unloading by Mazak CELL510 could be offered with warranty / commissioning / training always regularly serviced

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette Psdpfortd Uwex Ah Ueha - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Year of construction: 1978, condition: excellent (used), machine/vehicle number: 2751, General / technical data: Hydraulic horizontal internal broaching machine in in good technical condition Manufacturer: Karl Klink Model: RIW 6,3 Machine No: 2751 Year of manufacture: 1978 Weight: 2,3to tractive force: 6,3t broaching speed: hydraulically infinitely variable from 1m/min to 7m/min Return speed: hydraulically stepless adjustable from 7m/min to 25m/min Pjdpfxsiw Dlkj Ah Ujha maximum stroke: 1320mm maximum workpiece diameter: max. 420mm table opening: Ø 80mm dimensions: (w x d x h) approx. 5.700mm x 600mm x 1.900mm power supply: 380 Volt / 50 Hz / 4kW Accessories/ optional equipment: - Coolant / lubricant system - without tool feeder - Oil and chip tray (approx. 2,000mm) Remark: The machine is ideal for the production of keyways. Broaches as well as broaching mandrels can be supplied on request. The machine is ready for demonstration under power in our warehouse.

Year of construction: 1979, condition: ready for operation (used), Max. grinding diameter: 300mm, Max. grinding length: 1950mm, Max. workpiece length: 2000mm Phsdpfxshq Uigj Ah Uja Max Feed rate 1 – 30 m/min. Coolant supply 100 l/min Inf. variable speed range 2.000 – 6.000 RPM. Spindle 88 mm Centers height 150 mm Grinding wheels 100 – 250 mm Spindle power 3,5 kW Grinder Power 15 kW – 380 V – 50 Hz

Condition: used, Year of construction: 1992, Technical details: tube diameter: 6 mm Podpswivn Nsfx Ah Ujha tube diameter max.: 16 mm bending angle max.: 90 ° electrics - voltage/frequency: 220 / 50 V/Hz Total power requirement: 0,75 kW Weight approx.: 0,145 t machine dimensions LxWxH: ca. 1,0 x 0,8 x 1,2 m Application: Mini tube bending machine with free bending head. Processing of precision steel tubes according to DIN 2391/C, material 35.4 NBK Ø 6 - 16mm. -With hydraulic drive -8-fold bending preselection angle up to 180 -Pipe stop length 1m -Emergency stop button -mobile with parking brake -pivoting pipe head (vertical in horizontal position) -required hydraulic oil = approx. 20 liters (e.g. Esso Nuto 32) Accessories: various bending tools *

Condition: ready for operation (used), Sertom brand calender, hydraulic, length 25000 mm with invitation, 2 lower rollers 300 mm, upper roller 318 mm, thickness 14 mm. 22 Kw rotation, 5.5 kw movements, 2.5 kw bunk. Overall dimensions: 600x190x210(h)cm Weight: 15,500 kg Pjdpfxenr Npyo Ah Uoha

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm Pedpfx Aek Egrpoh Usha spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set