Extrusion Plant

Reifenhäuser/Dolci

Condition: excellent (used), Year of construction: 2013, screw diameter: 38 mm, This machine is in storage at Plastima Used Machinery Pgsdsvcqccopfx Adijw

Condition: used, Year of construction: 2005, Material type: LDPE, LLDPE, mLLDPE, HDPE, PP, regranulate Machine dimensions (LxWxH): 16 X 5 X 10.5 m Min/Max final Film width: 900 / 1700 mm Film thickness: 27–200 µm Capacity: Up to 240 kg/h Line speed: 0–150 m/min Screw diameter: 55/65/55 Layer ratio: Up to 25/50/25 % L/D ratio: 30/1 Number of heating zones: 3 for 55 mm and 4 for 65 mm (1 zone per screen) Dosing system: Doteco Grado; 3 units with 4 components each; centralized vacuum pump (added later); all scales fully serviced last year; new software and external touch screen; neck (before extruder) with additional magnets Electronics: Siemens, ABB Software: Macchi’s; full control via touch screen (replaced 3–4 years ago) Die head with IBC: 280 mm; 2.4 mm gap (3 heating zones); TE502 model with air ring extension Internal cooling balloon diameter control (IBC) Ultrasonic sensor (1 unit); JET internal cooling system Air ring: Karat, with 3 air inlets, 45 segments (valves), with integrated thickness control Air ring blower: YES Thermoregulation chiller: YES (Eurochiller) Bubble cage: YES; rollers with silicone cover; motorized electronic control; secondary cage with motorized open/close and adjustment Thickness control: K design (Karat, Kundig K-150); contact system integrated with air ring Collapsing frame: Free aluminum rollers Rotation: Nip roller 1800 mm (max film width 1700 mm); motorized open/close; speed control motor; other free rollers in aluminum; 2 ceramic air rollers for cooling Water-cooled rollers after nip roller: / Film centering: 2 ultrasonic sensors (Five) Corona treatment (double-sided): YES (F&B); above winders; 8 kW generator; ozone extractor and film detector; 10 mm electrode width Winders: Back-to-bac Pedpfxsw Nhavo Adijgw Winder model: Model BO; nip roller 1800 mm (max film width 1700 mm); manual shaft placement; max roll diameter 1000 mm; trim and multiple output rolls; film tension and winding control; 2 banana rollers; ‘flying knife’ (new Origa knife installed a few years ago); electric panel included Shafts: 4 x 76 mm and 4 x 152 mm Trim suction: YES; includes Supergrillo regranulation system Frame construction: YES Installed power: Approx. 150–200 kW (400 V, 3-phase

Condition: excellent (used), Year of construction: 2004, T-Die Serial No.: L 1081-041391 // Calender Serial No.: F 1201-041392 Haul-Off Serial No.: F 1201-041392-T Max. winder speed: 50 m/min Type: Film system 1080 mm usable width Equipment / Additional information: Max. gross output PP up to 1000kg/h with film width up to 1200mm A special feature is the winding system, which can cut narrow films (150 mm - 100 mm) or for example 8 x 175 mm or even 2 x 700 mm one nozzle lip with a max. film thickness of 2mm up to 1000kg/h. Total power consumption: 211 kW/h Main engine power: 250 kW Min. 068 mm film thickness in PS / min. 0.75 mm in PP Podpfx Adsw Tbr Hoiegw Maximum calender speed: Max. 50 m/min. mechanically possible Consists of: -Dosing system 5-chamber Maguire -Extruder (160 mm screw) Amut EA 160 // Age: 2003 -Screen changer (for cleaning in food production) -Melt pump -Slot die (1 insert) 120 cm -Lip with max. film thickness up to 2mm up to 1000kg/h -Calender 140 cm -Thickness gauge SBI TMD-EC/140.20.200.R -Post-cooling rollers (4 pcs.) -Winder (Film jam during roll jam) -Cutting machine & film tensioner -Film winders (3 pcs.) -Mill MAZZA CBS 25 40 2T18 // Age 2003 Fully existing infrastructure; control cabinets, pumps, etc.

Year of construction: 1990, condition: ready for operation (used), A total of three extruders including throughput measurements (scales), as-new barrels (2018) and overhauled screws are available. Total extrusion capacity: approx. 100kg/h. 1) DC smoothbore extruder, output: 17kW, machine dimensions X/Y/Z: approx. 2300mm/600mm/1100mm. 2) DC smooth tube extruder, power: 32kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. 3) DC grooved barrel extruder, output: 49kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. On-site inspection is possible. Pgjdpfx Adjvw Aqhjiow

Condition: new, Year of construction: 2021, Pick and place robot Model: KUKA 3 D1200 HM/SEL Year of production: 2021 Pedpfx Adot Ah Eweijgw Payload: 3 kg Reach: 1200 mm Control: KR C5 KSP Price for single robot: 1̶5̶.̶3̶0̶0 / 9,600€/pc. Price for robot in cell: 11,700€/pc.

Year of construction: 2014, condition: ready for operation (used), A complete Artec recycling and extrusion line is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 125mm, L/D ratio: 42, extrusion capacity: 650kg/h, degassing: 2-fold, shredder/extruder/screen changer output: 55kW/512kW/55kW. Total plant dimensions X/Y/Z: approx. 20700mm/3000mm/3400mm, control system: Siemens. Including shredder, conveying units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot granulating cut-off, bag filling and weighing station and bagging station. Documentation available. On-site inspection is possible. The system has extensively documented defects. Psdpfsv Ip Syex Adisgw