Industrial robot automation swivel arm

REXROTH SR6 Turbo Scara

Condition: used, Bosch Rexroth Type: SCARA SR6, control panel defective Guedpfx Adozh U R Ro Roi Bosch Rexroth pivoting arm robot, turbo SCARA SR6 with control unit Rated load: 2 kg Maximum load (sleeve diameter 20 mm): 5 kg Maximum load (sleeve diameter 25 mm): 8 kg Rated maximum moment of inertia (axis 4): 500 kgcm² Maximum moment of inertia (axis 4): 1000 kgcm² Horizontal force, continuous/maximum: 60/150 N Vertical force, continuous/maximum: 200/300 N Torque (axis 4), rated/maximum: 5/10 Nm Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Weinig Unimat 23 EL four-sided planer Working width 230mm Working height 160mm Head arrangement: Bottom 5.5kw Right 4kw Left 5.5kw Right 4kw Top 11kw Bottom 5.5kw Top 7.5kw Bottom 7.5kw Feed speed adjustable on variator 6-36m/min Feed driven by cardan shaft Rollers driven in table Pneumatic pressure pads Godpferb An Ujx Ad Roui CE certificate Year of production 2003

Condition: repair required (used), Stroj za struženje manjših koškov Gujdouknznopfx Ad Rei iz lesa stroj dela debelino od 7 -45 mm

Condition: used, Year of construction: 2000, machine/vehicle number: 0-260-06-0228, Foot-operated 1200 x 800 mm 80 mm dust extraction port pneumatic connection Cable + plug, 16 A Gujdpfxoigadlo Ad Roi 1 set of operating tools 1 set of feeler rollers

Condition: new, Year of construction: 2023, Extraction capacity of filter unit at spigot*: 2600 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 65 db(A) Dimensions L/W/H in mm: L 975 / W 508 /H 545 Colour: RAL 7035 Weight: 90 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil contents) and smoke, for small to very large machine workrooms | Oil mist separator. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories Guedpfsh Rdxnox Ad Rsi - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as Option and can be controlled, for example, with a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: good (used), Year of construction: 1996, 2 lines of ridgid box making machines with an extra lid-closing machine at the end of the 2 lines. Price is 12.500,- € for each line. Sold only as set. Godpfx Asi Dpb Usd Rjui

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Gusdpfx Aot Tqy Ejd Rji Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, 2 × KWB Powerfire TDS 300 – biomass boiler cascade Two automatic wood chip boilers, each rated at 300 kW, with a combined output of approximately 600 kW. The boilers can operate independently, allowing flexible output adjustment and redundancy. Features: - Rotary grate combustion system - Cyclone combustion chamber - Lambda-controlled combustion - Automatic output modulation - Automatic heat exchanger cleaning - KWB Comfort 3 controls - Suitable for wood chips and pellets Scope of delivery: two boilers with boiler-side feed augers and drive motors. Fuel-store extraction and additional conveying equipment are not included; available separately on request. The net price is for both boilers together. Inspection, exact equipment, collection location and transport must be agreed in advance. Installation and commissioning are the responsibility of the buyer. We also offer biomass boilers, pellet boilers, wood gasification boilers, pumps, buffer tanks, feeders and heating accessories. Guodpfxey A Ewtj Ad Rsi

Year of construction: 1998, condition: used, SECOND-HAND CNC CONTROL COPYING BAND SAW MZ UNIDUE 013 - NUM control - n. 3 cnc axis - cutting section 1300x800 h 100 mm - angle of cut 90°+/- - wheels diameter 900 mm Gujdpeimwtrjfx Ad Roi - volt. 380/50 - s/n 06 - CE rules (year 1998)

Condition: used, Year of construction: 2012, functionality: limited functionality, power: 45 kW (61.18 HP), Steam turbine Manufacturer: Siemens Type: AFA 2.5 Godpfx Adox H Rwys Roui Year of construction: 2012 Fresh steam pressure: 4.10 bar Fresh steam temperature: 153°C Fresh steam quantity: t/h Wheel chamber pressure: bar Wheel chamber temperature: °C Exhaust pressure: 0.90 bar Exhaust temperature: 140°C Electrical power: 45 kW Rated speed: 3,000 rpm Quick stop speed: 3,600 rpm Steam turbine with generator and vacuum condenser with pumps, without inspection, as is, without overhaul at current location. bps Consulting GmbH CONSULTING | PLANNING | SERVICE Steam turbines | Power plant systems and components info(at)bps-energie.de