Controlled rotary table with drive

Rottstedt Roundinho R60U

Year of construction: 1990, condition: good (used), CNC-4th axis NIKKEN type: CNC-200 year 1990 with counterholder and base plate. Ihjdogabu Uepfx Addjt

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Mikron / GF HPM 450 U WPC with Pallet Changer About the machine: High-precision 5-axis simultaneous milling machine with 7-position pallet changer (WPC). Excellent condition, extensive equipment! Very low spindle hours! Technical data: - Heidenhain ITNC 530 HSCI - X-axis: 600 mm - Y-axis: 450 mm - Z-axis: 450 mm - B-axis: +45° / -120° - C-axis: 360° - Spindle speed range: 20,000 rpm - Spindle drive: 23 / 30 kW - Torque: 91 Nm - Tool holder: HSK 63 - Pallet size: 280 x 280 mm - Max. pallet load: 150 kg - Number of tool magazine pockets: 60 - Max. tool diameter: 90 (130) mm - Max. tool length: 200 mm - Max. tool weight: 6 kg - Tool change time: 3 sec. - Feed force X-Y-Z: 5 kN - Rapid feed X-Y-Z: 22 m/min - Acceleration X-Y-Z: 5 m/s² - Rapid traverse B-axis: 50 rpm - Rapid traverse C-axis: 140 rpm Accessories: - 7 pallets, including 6 pallets with clamping devices (see photo) - Electronic handwheel - Infrared measuring probe - Laser tool measurement - Direct path measuring systems - APS Advanced Process System - ITC Intelligent Thermal Control - rConnect Live Remote Control (1 year) - KinematicsOpt - CT 60 tool magazine Ihedpfxox Hx Rhs Addet - DYNAFIX 7-position pallet changer - SIGMATEC 15 / 900 cbm/h oil mist extraction system - Tool blow-off device - Blowing air at the spindle carriage - Blowing air through the spindle center - Internal coolant supply 18–70 bar - Paper band filtration system - Chip conveyor - Spindle oil cooler Machine dimensions L x W x H: 6600 x 4000 x 2800 mm Weight: approx. 8,600 kg An inspection/test under power onsite is of course possible. We are not your average machine dealer – here, you will be advised by a CNC expert! We are happy to offer you transport, installation and setup, as well as commissioning and a machine training session, all performed by our own technicians. Everything from one source: Baumgärtner CNC GmbH & Co.KG is a company specialized in: - Service - Maintenance - Overhaul - Automation of DMG machines and other well-known manufacturers. We support you! From machine purchase, through transport and installation, to commissioning and subsequent maintenance or repair work, you can rely on us.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 1,000 mm, Measuring Range Ihedodv I Abepfx Addot X – axis 1200 mm Y – axis 2000 mm Z – axis 1000 mm Accuracy acc. ISO 10360 E = [2,6 + 4L/1000]µm DCC controller Renishaw UCC S5 JS box Renishaw MCU-5 (wireless on demand) Temperature sensor Renishaw Probe system Renishaw REVO 5-axis scanning probe Probe changer Renishaw (price REVO system new appx. € 80.000,--) Application software Inspect3D Inca V6 avzula version built 2014, retrofit 2017 with Revo

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 240 mm, overall weight: 6,000 kg, spindle speed (max.): 42,000 rpm, 5-axis HSC milling machine Röders RXP500DSC with linear direct drives in all axes and torque drives in the rotary axes. Travels: X450mm, Y400mm, Z240mm Spindle / table distance: approx. 315mm - Linear direct drives in all axes - wear-free Ihedpfxott Args Addjt Specification: - Tool changer places: 19 - Cooling unit for drives, motors, spindle and cable cabinet - Measuring laser for the fully automatic measuring of milling tools (length / diameter / contour / cone angle) as well as wear monitoring including tool cleaning before measuring - Handbox - Remote maintenance - Automatic 3D probe including calibration ball in the tool changer - Minimal quantity lubrication - emulsion cooling - Spindle HSK40E with max. 42.000 rpm - Spindle compensation - Zero point clamping system Erowa integrated in the machine table - manual operating of chuck clamping - Automation package for retrofitting the machine with a pallet changer - Handbox The machine is overhauled in our house and is now in almost new condition. The machine can be inspected and tested under power after completion at our site. Please make an appointment with us!

Condition: used, Year of construction: 2001, x-travel 2050 mm y-travel 1100 mm z-travel 800 mm Control Fanuc 18iM Super Cap II Ihjdporw Dknjfx Addjt turning speeds 60-6000 U/min tool magazin: 60 tool taper BT50 total power requirement 26 kW weight of the machine ca. 23,6 t required space 6,3 x 3,3 x 3,8 m

Condition: good (used), Year of construction: 1989, total height: 6,450 mm, For sale Beche short-stroke die hammer KGH 4B. Machine weight 65 t Working capacity 40 kJ Ihjdpfx Ajrt Uc Eoddet max. impact frequency 98 min max. usable number of blows 41 min max. bear stroke 790 mm Machine is disassembled Technical data on request

Condition: excellent (used), Year of construction: 2017, SIEMENS 840D SL control Working travels 550 x 320 x 420 mm Milling head swivellling +100 / -10 ° Spindle taper HSK A50 Ihjdpfewwundex Addot Spindle speeds -12'000 rpm Tool changer with 64 Pos. Turning spindle 4'500 rpm NC swivel rotary table with B- + C-axis Tool breakage control system Tool lenght measuring device 3D-measuring tracer Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 5831, travel distance X-axis: 7,500 mm, travel distance Y-axis: 6,200 mm, travel distance Z-axis: 2,000 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 7,500 mm, feed length Y-axis: 6,200 mm, feed length Z-axis: 2,000 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 150 kVA, torque: 45 Nm, controller manufacturer: Fanuc, workpiece length (max.): 7,500 mm, workpiece width (max.): 6,200 mm, workpiece height (max.): 2,000 mm, workpiece diameter (max.): 6,200 mm, workpiece weight (max.): 50,000 kg, total height: 5,500 mm, total length: 12,800 mm, total width: 8,900 mm, table width: 6,200 mm, table length: 7,500 mm, table load: 50,000 kg, spindle speed (min.): 24,000 rpm, spindle speed (max.): 28,000 rpm, coolant supply: 8 bar, spindle motor power: 28,000 W, number of spindles: 1, number of slots in tool magazine: 32, input voltage: 380 V, type of input current: AC, operating speed: 80,000 mm/s, Equipment: documentation/manual, rotational speed infinitely variable, Table Dimension 6,840 x 4,400mm. Axis Travel 'X'=7,500mm, 'Y'=6,200mm, 'Z'=2,000mm, 'B'=±110°, 'C'=±300°. Rapid Traverse 'XY'=85m/min, 'Z'=45m/min, 'BC'=9,000°/min. Iodeu I Nzrjpfx Addeht Maximum Spindle Speed 24,000rpm (28 kW Motor). Spindle Taper HSK 63F. 16 x 2 Position Tool Racks. S/No. 5831 (2011).

Year of construction: 2022, operating hours: 0 h, condition: new, Mobile cleaning centrifuge including buffer storage for dirty water, agitator and double membrane compressed air pump. - new machine - numerous other variants and special designs on request Machine type: Process water centrifuge solid-liquid Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Iedpef Sqfqjfx Addeht Application: vibratory finishing technology, general solid-liquid separation, cooling lubricant processing, wet blasting systems, ... Benefits: - High discharge through acceleration forces acting in the system of over 1800 times the acceleration of gravity - Management of the process water in a circuit, which minimizes operating costs and protects the environment - Saving of expensive additives for the vibratory grinding process (compound) - Economical and efficient separation of solid particles from a mixture - Economical and efficient separation of solid particles from a mixture - Suitable for process liquids up to 70 ° C (optional cooling available) - frequency-controlled motor drive for smooth acceleration and braking of the rotor Are you looking for innovative solutions for surface treatment and process water treatment? We offer a wide range of systems in the field of vibratory grinding, drying and process water technology, which are precisely tailored to your application. From development to production: We deliver all of our products from a single source and everything is "Made in Germany". ----- Please just contact us, we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Year of construction: 2006, condition: ready for operation (used), A DMG Mori 3-axis precision milling machine is available. Travel X/Y/Z: 200mm/200mm/190mm, speed: 40000rpm, feed: 30m/min, accuracy: 0.001mm. Machine dimensions X/Y/Z: approx. 1800mm/1550mm/1850mm, weight: approx. 2200kg, control: Siemens 840D, operating hours: 4979h, spindle hours: 1041h. The spindle was completely overhauled in 2023. An on-site inspection is possible. Ihedevi N D Sjpfx Addet