Vibro sieve

Russell 804

Condition: as good as new (ex-display), Year of construction: 2026, SRF master figure left 2 m suction arm Scope of application Low smoke and dust Sporadic usage Use Little run the extractor hood required Flexible by additional hose connection rear Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Push handle and cable holder Procedure filter type disposable filter filter surface approx. 12 m² ᐳ 99% filtration efficiency 3-stage filter material glass fibre welding smoke off vagina class W3 Additional filter two prefilter basic data suction capacity Max 950 m ³/h diameter extraction arm Ø 150 mm length extraction arm 2 m diameter suction connection Ø 150 mm electrical connection 230 V / 50 Hz motor 1,1 kW sound pressure level 72 dB(A) dimensions (W x D x H) 705 x 655 x 900 m m weight approx. 71 kg Cpodpfxedqzbrj Aa Njw

Condition: excellent (used), We have two almost identical sieving stations on frames to sit over bins. Both new in 2014 and in lovely condition. Photos show the machines before washing. 550mm sieve diameter. Choice of mesh screens. Each machine will be supplied with one screen. Csdpevpv Nujfx Aa Nepw

Condition: good (used), Year of construction: 2020, operating hours: 1,730 h, functionality: fully functional, overall weight: 580 kg, total length: 1,335 mm, total width: 750 mm, total height: 1,880 mm, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, noise level: 66 dB, protection type (IP code): IP55, Equipment: documentation/manual, refrigerant dryer, type plate available, Kaeser Aircenter SK22 Screw Compressor (2020) Manufacturer: Kaeser Type: Aircenter SK22 Year of Manufacture: 2020 Condition: Very good, used Run-on hours: 6,000 h Load hours: 1,730 h Maintenance in 2,589 h Technical Specifications Pressure 11 bar Effective free air delivery 1.67 m³/min Rated motor power 11 kW Motor protection class IP 55 Power supply 400 V / 3 Ph / 50 Hz Cpedpfx Ajxnnd Doa New Dimensions (W x D x H) 750 x 1,335 x 1,880 mm Weight 580 kg Air receiver 350 l Compressed air connection G 1 Sound pressure level 66 dB(A) Refrigeration dryer Power consumption 0.49 kW Pressure dew point 3 °C Pressure drop 0.06 bar Refrigerant R 513a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Electrical equipment: EN 60204-1: Yes Scope of delivery: – Complete original documentation – RFID cards (2x) – 5m power cable with 32A plug

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 1100 x 1495 mm 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. Cedpfx Aohp S Trea Nspw The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: used, Manufacturer : Amcko Model: A-30 Type: Vibrating screener Diameter : 30’ - 76,2 cm Total height : 90 cm Number of separation decks : 1 Cedpox R Dg Aefx Aa Njpw Screen with unclogging system    

Condition: good (used), Year of construction: 2007, operating hours: 9,600 h, functionality: fully functional, Kaeser SK21 screw compressor from 2007 in excellently maintained condition. Maintenance kit (oil separator cartridge, replacement filter, air filter, and oil) is included. Cpodpfxox H Uluo Aa Njw Maintenance records and compressor logbook are available. Power: 11 kW Pressure: 8 bar Load hours: approx. 9,600 h #8442

Year of construction: 2009, condition: used, Year : 2009 Type: Vibrating sieve Material : stainless steel Engine reference: Elettromeccanica Tarcisio Pugni PVF-F 200 Motor power: 1.1 kW / 1500 rpm Nominal sieve diameter: 900 mm Système de décolmatage : billes Machine dimensions: 110 x 130 x 120 cm Plan for replacement of the grid: this item may be subject to a separate quotation. Codpfx Aaeykb U Ne Nepw  

Condition: used, Manufacturer : AZO Model: E450 B1 Cpedpfxsx R A U Se Aa Nsw Type : Rotary sieve Application : Control and safety screening Stainless steel Motor power : 1,3 kW ATEX classification: Exe G1-3 Te 30 Capacity: max 6000 KG / H depending on screen size Documentation available

Condition: good (used), Year of construction: 2013, Powered roller conveyor, 5.95 m, width 64 cm, Transnorm – used - Price ex-location (net): €395! Manufacturer: Transnorm Year of manufacture: 2013 Element length: approx. 5.95 m Cpjdpfx Aaewxvrte Nsw Element width: approx. 68 cm Roller length: approx. 64 cm Roller diameter: approx. 4 cm Condition: good Available: immediately Location: warehouse Frankenberg / Saxony Powered roller conveyor, 3.80 m, width 64 cm, Transnorm – used - Price ex-location (net): €295! Manufacturer: Transnorm Year of manufacture: 2013 Element length: approx. 3.80 m Element width: approx. 68 cm Roller length: approx. 64 cm Roller diameter: approx. 4 cm Condition: good Available: immediately Location: warehouse Frankenberg / Saxony Unfortunately, the conveyors were not photographed – the roller conveyor can be seen at the back of the picture.