Eurostar Blokrinser Isobarometric Filler

Sasib/ Simonazzi Druckfüller

Condition: excellent (used), Year of construction: 2009, Used Bottling Line | Used Beverage Line | Soft Drinks NP 602 | PET BOTTLING LINE 12,000 BPH Speed: 12,000 Bph Blow molding machine SIPA Year: 2009 Number of cavities: 8 Preform elevator Preform orientator Chiller Formats of 05 L - 1 L - 1.5 L Monoblock TETRA PLAST RFA-40 Year: 1995 Iasdpfotqfcgjx Addel Filling type: aseptic Cap type: prethreaded plastic 38mm Caps elevator Dryer EUROPOOL Year: 2007 Type: air blades Labeling machine KRONES Type: roll-feed Sleever machine CLEVER 2019 With Steam Tunnel Bottle rejection system FMT dryer Year: 2011 Type: air blades SMI Bundler Year: 2009 TWIN PACK handle applicator Year: 2000

Condition: good (used), Automatic ROPP Capper Make: Bertolaso Iasdpfeg Dvfwjx Addel Typ: Automatic ROPP (pilfer-proof) Capper Model: Alfa 110-VH40 speed: Up to 2.000 caps/hr Dimensions: L x W x H = 1.800 x 800 x 1.800 mm electric: 380 Volt – 50 Hz Tooling: Customer choice Features:Included cap sorting as-is or adjusted to customer needs

Condition: used, Year of construction: 2008, Used Combiblock Sidel SBO 20 Universal 36000 bph The Used Sidel SBO 20 Universal Combiblock 36000 bph is an integrated bottling system, combining a blower and a filler/capper in a single unit. This machine is designed for the production of PET bottles, with a production capacity of up to 36,000 bottles per hour. The Sidel SBO 20 Universal blower features 20 cavities, allowing efficient and continuous production. The system includes a preform feeder with a hopper and a preform unscrambler, ensuring a constant flow of material in the production process. The Europa WM 60 filler/capper is integrated into the Combi block, optimizing space and reducing transfer times between the blowing and filling stages. This compact design improves operational efficiency and minimizes the risk of contamination. The system has been used for bottling natural mineral water in 0.5-liter formats, with a 26.6 mm Alaska-type neck customization. The machine pitch is 113 mm, adapting to specific production needs. Currently, the machine is in storage, ready to be installed and put into operation in a new production facility. A complete inspection is recommended before start-up to ensure optimal performance. The required power supply is 400 V at 50 Hz, standard in many industrial plants. The immediate availability of the Combi system represents an opportunity for companies looking to quickly increase their production capacity.   Advantages of the Combi system over a traditional system The Combi system, like the Used Sidel SBO 20 Universal Combiblock 36000 bph, offers numerous advantages over traditional systems, which use separate machines for blowing, filling, and capping. Firstly, the compact design drastically reduces the space occupied in the plant, allowing companies to optimize available space and, in many cases, reduce infrastructure costs. Moreover, the Combi system eliminates the need for intermediate conveyors and accumulation zones between stages. This layout simplification reduces maintenance costs, lowers the risk of jams or breakdowns along the production flow, and improves the overall line efficiency. The absence of intermediate steps also reduces the possibility of contamination, a priority especially in the food and beverage sector. The integrated process between blowing, filling, and capping shortens production times as the operations proceed continuously and without interruptions. This contributes to increasing the overall line speed and hourly production capacity. Higher efficiency translates not only into increased productivity but also into a significant reduction in energy consumption and operating costs. Additionally, the Combi system requires fewer personnel for line management and supervision, as a single control unit allows all operations to be monitored from a centralized interface. This simplifies operational procedures and makes quality control easier throughout the process. Iajdpfx Adjvgu D Ssdsl

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25      Working hours: 47.000 only         Machine was regularily maintained       Machine equipped with:            Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request Iajdpfx Adjrkgy Ujdjl

Year of construction: 2002, condition: good (used), Built in: 2002 Working hours: 10.688 thsd.h Size: max 365 x 305 mm min 105 x 115 mm Product thickness: max 15 mm min 6 mm Speed: max 9.000 c/h min 2.000 c/h Equipment: gathering chain & feeder • 10 station gathering track & chain • 10 automatic feeders • 1 cover folder feeder 1528 stitching unit • wire unwind device • stitch control • 2 stitching heads HK 75 three knife trimmer • three knife trimmer 1522 Ijdpfx Aed R Sanjddjal knives • 2 sets of knives

Condition: used, Year of construction: 1999, Overview This SIDEL blow moulder and KHS filling monobloc were both manufactured in 1999. They are still in production until the end of October and can be viewed in person. The special feature of the filler is that it can process carbonated or still mineral water with natural flavors using a micro-dosing unit. The filler (KHS Innofill monobloc) and accumulation table (Sidel AQ) are also available without the blow molder (Sidel SBO 18 Series 2), price on request.  Technical Details Blow moulder | SIDEL | SBO 18 Series 2 | 1999 Current capacity: 23.400 bph in 1.25L Working hours: 40.000            Number of moulds: 18      Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained     Machine equipped with:            Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control Lanfranchi bottles buffer storage silo            Unscrambler and air conveyor system with drive to the entry KHS monobloc Supplied with all format & spare parts available Rinser, Isobarometric Filler, Capper Monobloc | KHS, Zalkin | VK-E 40/50/10/S PET | 1999 (low working hours) Filling carbonated mineral water and also carbonated mineral water with natural flavours Processing: PET bottles 1,25L & 0.50L cylindrical petaloid base Bottle neck: PCO28 1881 Current capacity: 23.400 bph Number of rinsing nozzles (KHS Innoclean): 40 Number of filling valves (KHS Innofill): 50 Number of capping stations (Zalkin): 16 Including also micro-dosing unit Perrier for natural flavours With caps magazine & elevator Accumulation table Gebo Sidel type AQ file Dynamic accumulation and buffer between the filler outlet and the labeller inlet, avoids untimely stops upstream (filler, blow-moulder) due to the labeller Iasdpfx Ajrqar Ssddjl

Condition: good (used), Technical data are shown on pictures. Ijdpfxep N Aq He Addoal

Condition: like new (used), Used Bottling Line | Used Beverage Line | Wine MBF NP 574 | Bottling Line for Still Wine Year: 2011 Speed: 10,000 Bph Cork elevator Filling Monoblock MBF 45.50.6 | Year: 2011 Rinser 45 clamps Filling machine 50 valves Capper 6 screw heads Bottle dryer Bottle inspector | Level control Sacmi Kube | Labeling machine Year: 2017 No.6 adhesive stations Cermex carton moulder Gluer Nordson TMG cartoning machine DS Smith carton closer Nordson Gluer Carton weigher Iedpfx Adjtr Hd Ssdoal CONVEYOR BELTS ABSENT

Year of construction: 2021, condition: new, universal flame treatment machine for cylindrical parts up to 300 mm diameter Iedpfxjgln Sxe Addeal

Condition: used, Year of construction: 2018, Overview  The Gruber AFD6 is a filling machine for bottles and party KEGs that was produced by the German manufacturer Gruber in 2018 and has an operating time of 725 hours. The machine is available immediately. Technical details Output 800 bph (at 0.33l) 750 bph (at 0.5l) 600 bph (with 1.0l) 400 bph (for 2.0l) 240 bph (with 5.0l party KEG) Output varies depending on CO2 content and beer temperature (in practice, 1,000 bph could be achieved at 0.33l) Long tube filler with 6 filling points Fully automated filling process Single or double CO2 flushing Siemens S7 control system with touch panel Operating hours: 725 hours Ijdpou I Hr Uofx Addjal