Walking floor semitrailer

SCHMITZ CARGOBULL SW24 - Seitentüren

Condition: used, axle configuration: 3 axles, first registration: 04/2012, Year of construction: 2012, Equipment: ABS,

Condition: used, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL Type AZP Curtain-sided low loader, low-loader trailer, low loader for machine transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Isdpfjt N Antex Apneat Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at drop side height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and the tarp pushed forward) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle with lift function - Drawbar – extendable in multiple stages - Heavy-duty lashing rings on the outer frame and in the vehicle centre - ALU drive-on ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is therefore first-hand. The trailer has been deregistered since 2025.

Condition: used, axle configuration: 3 axles, first registration: 06/2012, Equipment: ABS, Lift axle Ijdpfx Asrdtihjpnoat

Condition: as good as new (ex-display), Demonstrator with 7 operating hours Another machine available immediately (ex works in Neckartailfingen) MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slide gate Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Isdov Sqrpspfx Apnoat Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Raise the shredder by 30 cm (prepared for conveyor belt) Additional shredder options: - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €6,780 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: reconditioned (used), Year of construction: 2019, Presto HAN10R Press container for skip loaders 10 m³ usable capacity Discharge door hinged at the top Two-piece lid above filling opening, opening left/right Prepared for ramp operation Machines are overhauled, serviced, inspected, and repainted in standard RAL color before sale. Pictures are reference images of machines of the same type we have manufactured. We will be happy to provide a quote including delivery. Ijdpfx Aew Uqngepnjat

Year of construction: 2022, condition: new, Wire stripping machine G.R.S. 5 Iajdpfehpcprjx Apnet This is the second model by G.R.S., what stands on its own feet. Compared to the G.R.S. 4 this model weighs about double, has 30% more power and requires 380V for operation. Technical Data: GRS 5 10mm - 90mm Dimensions: W / H / D 78 cm / 120 cm / 84 cm Weight: app. 220 Kg Cutting speed: 30 Meters p. Minute Engine: 380V / 3000W Stripping of cables with a cross section of 10 - 90 mm and an insulation thickness up to 20 mm.

Year of construction: 1981, condition: used, pressure 40 t distance between columns 600 mm stroke 160 mm table-size 560 x 400 mm dayligth 360 mm ram hole 40 H 7 DIN 810 mm oil volume 500 l return speed 200 mm/sec die cushion hydr. pressure/stroke 60 capacity of ejector 25 t total power requirement 15 kW Isdpfx Aeb U Hw Topnsat dimensions of the machine ca. 1.44 x 0.95 x 2.54 m pressing speed 27 mm/sec return speed 200 mm/min

Year of construction: 2022, condition: new, Cable stripping machine G.R.S. 9 This incredible machine strips 33 meters cable per minute. You need 380 volts and 3 kW, but the processing capacity of about 2 mm to 80 mm, is reasonable. With a mass of 405 kg, you can move the machine short distances on it's own wheels - for longer distances a other transport method is necessary. Isdpfjhpcnqjx Apnsat The criteria for this machine: Very fast and reliable processing of cable thicknesses between 2 mm and 80 mm. Technical Data: Cutting speed: 33 Meter / min. (forward) 23 Meter / min. (backwards) Processing capacity: Ø 2 mm — Ø 80 mm Motor power: 3000 Watts Voltage: 380 Volt Weight: 405 Kg Dimensions in cm: 108 × 85 × 120 Color: blue

Year of construction: 2010, condition: good (used), CNC BIESSE BREMA EKO 902 INSERTS FOR SALE TECHNICAL DETAILS: 3-AXIS C.N.C. MACHINING CENTRE (X-Y-Z) - Integral protection of the operating spindle and the working area on the machine. - Numerical control (control) with BIESSE Works software on Windows. - Vertical positioning of the panels, with N. 2 panel locking clamps. - Panel feed (in X-axis direction, on the lower support with rubber wheels), movement (in X-axis) of the panel/board clamps. Iaodpfxehknbrs Apnot DIMENSIONS OF THE PALLETS (WORKING DIMENSIONS): - Length Min mm 160 / Max mm 3200 - Width Min mm 35 / Max mm 900 - Wait Min mm 8 / Max mm 80 WORKING GROUPS: - No. 1 Spindle (electro-spindle) vertical ER32 (KW 4,5) with reversing (up to 18000 RPM). - No. 1 Circular saw (for grooves) diameter mm 120 (fixed X axis) - No. 13 Independent vertical spindles for drilling (6 in X-axis + 7 in Y-axis) - Nº 8 Independent horizontal spindles for drilling (3+3 on X axis and 1+1 on Y axis) - Nº 1 Hinge drilling head unit - Total installed power 20 KW AUTOMATIC DOWEL INSERTION GROUP ON BOTH SIDES WITH PRESSURE PUMP TO APPLY THE GLUE.

Condition: new, lifting capacity:30000 kg empty weight:429 kg Iedpfod R Hvysx Apnoat dimensions:2450 mm height:535 mm width:265 mm length maximal:4250 mm extendable to ( + 800 JP):6200 mm Extendable to:8500 mm Guarantee:12 Monate Shackles:4 + 4 Stück extensions (each 1 Set, 4 pcs):800 JP Webbing sling attachement:800 LKP 4 point lifting bracket :800 LK Lifting bracket, wide:800 NKL Equalizer plates:800 TL Unwinder:800 AR 7 Rack:800 ST 2