SIDE TMS 2001 G Blow Moulder (2001)

SIDEL SBO 18, KHS, Blasmaschine

Condition: used, Municipal tractor, tractor, implement carrier, manufacturer HAKO Kfodpfxswbvl Ss Ah Uja Type Hakotrak 2600 DA with snow blade and sweeper Date of first registration: October 28, 1998 Engine power: 20 kW = 28 hp Displacement: 1330 cc Top speed: 21 km/h - Three-cylinder PERKINS diesel engine - Hydrostatic drive with 3 electrically selectable speeds - All-wheel drive and locks - Cabin heating via cooling water system - Cabin with right and left doors, also removable - Roof can be raised for summer use - Rear window can be raised - Front hydraulics with coupling triangle = quick coupler and hydraulic float position - Two hydraulic connections each at the front and rear - Hydraulic power lift at the rear - Front PTO, clockwise rotating at 2000 rpm. (Rotates clockwise as viewed from the vehicle) - Rear PTO shaft rotates clockwise at 540 + 1000 rpm. - SPERBER snow blade with hydraulic cylinder for pivoting and spring flaps (width: 1400 mm) - PTO-driven sweeper with hydraulic cylinder for pivoting (width: 1300 mm) - Removable rear ball coupling (homemade) on the power lift - Front lawn tires 23 x 10.5 - 12 - Street lighting with 4 headlights and rear work lights - Yellow rotating beacon - 1302 operating hours Vehicle dimensions: Length approx. 2750 x Width 1245 x Height 2000 mm Vehicle weight without attachments: 1340 kg GVWR: 2500 kg GVWR: 1000 kg GVWR: Rear axle load 1800 kg Front tires 23 x 8.50-12/4PR Rear tires 33 x 12.50-15/4PR Towing capacity with brakes 3500 kg Towing capacity without brakes 1200 kg The vehicle was only used for property maintenance and for clearing snow on the company premises in winter. Never for municipal use. Without a salt spreader, which is no longer available and was only used initially. Sweeper is equipped with new sweeping brushes and works perfectly. Snow blade is very stable and works perfectly. The tractor needs some repairs; the parking brake is not working properly. The service brake is poor; the hydrostatic drive actually eliminates the need for a brake. However, the TÜV (German Technical Inspection Agency) criticized this. The hydrostatic drive needs to be readjusted at the foot pedal control. The vehicle is currently still registered, but will be sold deregistered.

Condition: good (used), functionality: fully functional, Used Bottling Line | Used Beverage Line | Soft Drinks NP 625 | ASEPTIC PET BOTTLING LINE Year: 1998 - 1999 Speed: 18,000 Bph 1.5L Line consisting of: SIDEL Blower Model: SBO 16/16 ROUE Number of cavities: 16 Kjdpfxetu Hy Ne Ah Ujfa Type: rotary CHILLER AND COMPRESSOR NOT INCLUDED Preform elevator Preform rearranger PROCOMAC monoblock Type: ASECTIC Rinser Gravity filler Capper Cap type: prethreaded plastic Sleevering machine Type: rotary Long-run warehouse Steam tunnel OCME Bundler Film-throwing type OCME Palletizer Type: push type Film-laying system Pallet magazine OCME pallet wrapper

Condition: used, Year of construction: 1992, Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Kfedpsnpbhvsfx Ah Uoa

Year of construction: 2013, condition: ready for operation (used), A KHS bottle filling machine is available. Filling object material: glass, filling points: 168, filling capacity: 22000-65000 bottles/h, sterile filter: 0.2µm, max. oil content: 0.01mg/m³, max. solids content particle diameter: 10µm, min. filling capacity per filling point: 250-300l/h, filler type: pitch circle, pitch circle filler diameter: 5040mm, bottle volume: 0.33l/0.5l, bottle formats: Steini/Long Neck Pils/NRW Pils/Long Neck. Documentation available. On-site inspection is possible. Kodpfxevcc S Ns Ah Uofa

Condition: used, Year of construction: 2008, Used Combiblock Sidel SBO 20 Universal 36000 bph Ksdevgu D Sopfx Ah Uefa The Used Sidel SBO 20 Universal Combiblock 36000 bph is an integrated bottling system, combining a blower and a filler/capper in a single unit. This machine is designed for the production of PET bottles, with a production capacity of up to 36,000 bottles per hour. The Sidel SBO 20 Universal blower features 20 cavities, allowing efficient and continuous production. The system includes a preform feeder with a hopper and a preform unscrambler, ensuring a constant flow of material in the production process. The Europa WM 60 filler/capper is integrated into the Combi block, optimizing space and reducing transfer times between the blowing and filling stages. This compact design improves operational efficiency and minimizes the risk of contamination. The system has been used for bottling natural mineral water in 0.5-liter formats, with a 26.6 mm Alaska-type neck customization. The machine pitch is 113 mm, adapting to specific production needs. Currently, the machine is in storage, ready to be installed and put into operation in a new production facility. A complete inspection is recommended before start-up to ensure optimal performance. The required power supply is 400 V at 50 Hz, standard in many industrial plants. The immediate availability of the Combi system represents an opportunity for companies looking to quickly increase their production capacity.   Advantages of the Combi system over a traditional system The Combi system, like the Used Sidel SBO 20 Universal Combiblock 36000 bph, offers numerous advantages over traditional systems, which use separate machines for blowing, filling, and capping. Firstly, the compact design drastically reduces the space occupied in the plant, allowing companies to optimize available space and, in many cases, reduce infrastructure costs. Moreover, the Combi system eliminates the need for intermediate conveyors and accumulation zones between stages. This layout simplification reduces maintenance costs, lowers the risk of jams or breakdowns along the production flow, and improves the overall line efficiency. The absence of intermediate steps also reduces the possibility of contamination, a priority especially in the food and beverage sector. The integrated process between blowing, filling, and capping shortens production times as the operations proceed continuously and without interruptions. This contributes to increasing the overall line speed and hourly production capacity. Higher efficiency translates not only into increased productivity but also into a significant reduction in energy consumption and operating costs. Additionally, the Combi system requires fewer personnel for line management and supervision, as a single control unit allows all operations to be monitored from a centralized interface. This simplifies operational procedures and makes quality control easier throughout the process.

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25      Working hours: 47.000 only         Machine was regularily maintained       Machine equipped with:            Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request Kjdpfx Ahorkgy Us Uofa

Condition: good (used), Item: A-2819-Landteknik Cheese vat 12T Cheese vat Landteknik Complete Stainless Steel, Agitator inside, Whey filter. Capacity 12.000L. We can offer two pieces/identical Kfedpjh D H Urjfx Ah Usa

Condition: new, operating hours: 5 h, power: 18 kW (24.47 HP), gearing type: mechanical, fuel type: diesel, color: blue, overall weight: 2,125 kg, mileage: 5 km, empty load weight: 1,525 kg, maximum load weight: 600 kg, suspension: other, number of seats: 1, Equipment: all wheel drive, cabin, differential lock, Power steering, switchable all-wheel drive, diesel engine 18.2 kW, 1,319 cm³, 4.6 operating hours, cab, illuminated dashboard, adjustable suspended seat with safety belt, 1 seat, hydrostatic drive, analog fuel gauge, rear swiveling work lights, 2 front weights of 15 kg each, rotating beacon, 3 cylinders, power steering, differential lock, 20 km/h, front hydraulics, braked towing capacity 3,000 kg, lifting capacity 600 kg, diagonal tires front: 6.0-12, rear: 8.30-20, weight 1,525 kg, permissible total weight 2,125 kg. Turf tires available for an additional €500 net. FOR US, CONDITION AND FEELING MATTER MOST; PRICE IS SECONDARY. For further questions, please contact Mr. Faller at the provided number. //*TRADE-IN, PURCHASE, OR FINANCING OF YOUR VEHICLE POSSIBLE! All information without guarantee.* More offers can be found on our homepage. The description and the data provided do not constitute a binding assurance and are not guaranteed. The only binding agreement is the purchase contract concluded at the dealership when the vehicle is bought. Errors and prior sale excepted! Ksdswtqmzepfx Ah Uofa

Condition: used, Year of construction: 1999, Overview This SIDEL blow moulder and KHS filling monobloc were both manufactured in 1999. They are still in production until the end of October and can be viewed in person. The special feature of the filler is that it can process carbonated or still mineral water with natural flavors using a micro-dosing unit. The filler (KHS Innofill monobloc) and accumulation table (Sidel AQ) are also available without the blow molder (Sidel SBO 18 Series 2), price on request.  Technical Details Blow moulder | SIDEL | SBO 18 Series 2 | 1999 Current capacity: 23.400 bph in 1.25L Working hours: 40.000            Number of moulds: 18      Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained     Machine equipped with:            Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control Lanfranchi bottles buffer storage silo            Unscrambler and air conveyor system with drive to the entry KHS monobloc Supplied with all format & spare parts available Rinser, Isobarometric Filler, Capper Monobloc | KHS, Zalkin | VK-E 40/50/10/S PET | 1999 (low working hours) Filling carbonated mineral water and also carbonated mineral water with natural flavours Processing: PET bottles 1,25L & 0.50L cylindrical petaloid base Bottle neck: PCO28 1881 Current capacity: 23.400 bph Number of rinsing nozzles (KHS Innoclean): 40 Number of filling valves (KHS Innofill): 50 Number of capping stations (Zalkin): 16 Including also micro-dosing unit Perrier for natural flavours With caps magazine & elevator Accumulation table Gebo Sidel type AQ file Dynamic accumulation and buffer between the filler outlet and the labeller inlet, avoids untimely stops upstream (filler, blow-moulder) due to the labeller Kjdporqar Sjfx Ah Uofa

Condition: ready for operation (used), Further information will follow. Accessories: Separator frame (stainless steel) 1200 x 1000, separator drum, motor, Ksdpfxeqzx Dqe Ah Uefa tool kit, documentation